Skip to contentSkip to conversation

sun50i: a64: Add Olimex A64-Teres-I board initial support

PATCH Superseded Jonas Smedegaard 2 participants 4 messages Apr 18, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 sun50i: a64: Add Olimex A64-Teres-I board initial support

Olimex A64-Teres-I board is a mainboard (the only one so far) for Olimex Teres-I DIY laptop kit.

Key features:
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 2GB DDR3 RAM
- MicroSD Slot
- 16GB eMMC Flash
- eDP LCD display
- HDMI
- USB Host
- Battery management
- 5V DC power supply
- Certified Open Source Hardware (OSHW)

Works:
- i2C
- MMC/SD
- PWM backlight

Known broken:
- USB

Company page: https://linux-sunxi.org/Olimex_Teres-A64
Community page: https://linux-sunxi.org/Olimex_Teres-A64
hardware sources:
https://github.com/OLIMEX/DIY-LAPTOP/tree/master/HARDWARE/A64-TERES/TERES-PCB1-A64-MAIN

This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree).

Linux commit details about the sun50i-a64-teres-i.dts sync:
"arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins" (sha1: d91ebb95b96c8840932dc3a10c9f243712555467)

Cosmetic warnings regarding whitespace and placement of SPDX notice for dts file was ignored.

config and .dtsi file are adapted from pinebook files.

---

Changes for v2:
* List Icenowy and Jonas as MAINTAINERS
* Add commit hash in linux tree for sun50i-a64-teres-i.dts
* Drop superfluous and unsupported Author: tag

Changes for v3:
* Use tags sun50i a64 (not sunxi)
* List key, working, and known broken features
* Reference upstream pages.
* Reference linux commit

---
 MAINTAINERS                                 |   8 +
 arch/arm/dts/Makefile                       |   3 +-
 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi |  41 +++
 arch/arm/dts/sun50i-a64-teres-i.dts         | 270 ++++++++++++++++++++
 configs/teres_i_defconfig                   |  21 ++
 5 files changed, 342 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
 create mode 100644 arch/arm/dts/sun50i-a64-teres-i.dts
 create mode 100644 configs/teres_i_defconfig
MAINTAINERS +8 -0
index c77abba1e5..d6ba87a0ba 100644
@@ -319,6 +319,14 @@ F:	arch/arm/include/asm/arch-sunxi/
 F:	arch/arm/mach-sunxi/
 F:	board/sunxi/
 
+ARM SUNXI OLIMEX TERES-I
+M:	Jonas Smedegaard <[email protected]>
+M:	Icenowy Zheng <[email protected]>
+S:	Maintained
+T:	git https://salsa.debian.org/js/u-boot
+F:	arch/arm/dts/sun50i-a64-teres-i*
+F:	configs/teres_i_defconfig
+
 ARM TEGRA
 M:	Tom Warren <[email protected]>
 S:	Maintained
arch/arm/dts/Makefile +2 -1
index 0aee8dfde0..eabe9e1ae3 100644
@@ -483,7 +483,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-pine64-plus.dtb \
 	sun50i-a64-pine64.dtb \
 	sun50i-a64-pinebook.dtb \
-	sun50i-a64-sopine-baseboard.dtb
+	sun50i-a64-sopine-baseboard.dtb \
+	sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb \
arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi new file +41 -0

41 lines not on this page · raw message

arch/arm/dts/sun50i-a64-teres-i.dts new file +270 -0

270 lines not on this page · raw message

configs/teres_i_defconfig new file +21 -0
new file mode 100644
index 0000000000..939dc24408
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=3881949
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_I2C0_ENABLE=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-teres-i"
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_SUNXI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+# CONFIG_USB_GADGET is not set
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
Signature · 1 line
2.20.1
#1 lore raw

PATCH v3 1/1 sun50i: a64: Add Olimex A64-Teres-I board initial support

Quoted 18 lines · Jonas Smedegaard

Olimex A64-Teres-I board is a mainboard (the only one so far) for Olimex Teres-I DIY laptop kit.

Key features:
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 2GB DDR3 RAM
- MicroSD Slot
- 16GB eMMC Flash
- eDP LCD display
- HDMI
- USB Host
- Battery management
- 5V DC power supply
- Certified Open Source Hardware (OSHW)

Quoted 7 lines

Works:
- i2C
- MMC/SD
- PWM backlight

Known broken:
- USB

what is broken? any information?

Quoted 5 lines

Company page: https://linux-sunxi.org/Olimex_Teres-A64
Community page: https://linux-sunxi.org/Olimex_Teres-A64
hardware sources:
https://github.com/OLIMEX/DIY-LAPTOP/tree/master/HARDWARE/A64-TERES/TERES-PCB1-A64-MAIN

I usually won't prefer these links in commit message.

Quoted 45 lines

This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree).

Linux commit details about the sun50i-a64-teres-i.dts sync:
"arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins" (sha1: d91ebb95b96c8840932dc3a10c9f243712555467)

Cosmetic warnings regarding whitespace and placement of SPDX notice for dts file was ignored.

config and .dtsi file are adapted from pinebook files.

---

Changes for v2:
* List Icenowy and Jonas as MAINTAINERS
* Add commit hash in linux tree for sun50i-a64-teres-i.dts
* Drop superfluous and unsupported Author: tag

Changes for v3:
* Use tags sun50i a64 (not sunxi)
* List key, working, and known broken features
* Reference upstream pages.
* Reference linux commit

---
 MAINTAINERS                                 |   8 +
 arch/arm/dts/Makefile                       |   3 +-
 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi |  41 +++
 arch/arm/dts/sun50i-a64-teres-i.dts         | 270 ++++++++++++++++++++
 configs/teres_i_defconfig                   |  21 ++
 5 files changed, 342 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
 create mode 100644 arch/arm/dts/sun50i-a64-teres-i.dts
 create mode 100644 configs/teres_i_defconfig
MAINTAINERS +0 -0
index c77abba1e5..d6ba87a0ba 100644

MAINTAINERS F: arch/arm/include/asm/arch-sunxi/ · line 326

Quoted 8 lines
MAINTAINERS +5 -0
@@ -319,6 +319,14 @@ F: arch/arm/include/asm/arch-sunxi/
 F:     arch/arm/mach-sunxi/
 F:     board/sunxi/
 
+ARM SUNXI OLIMEX TERES-I
+M:     Jonas Smedegaard <[email protected]>
+M:     Icenowy Zheng <[email protected]>
+S:     Maintained
+T:     git https://salsa.debian.org/js/u-boot

Is there any relation to this tree to Mainline. usually the git tree which are preparing PR's can list like this otherwise no need.

#2 lore raw

PATCH v3 1/1 sun50i: a64: Add Olimex A64-Teres-I board initial support

Quoting Jagan Teki (2019-04-18 18:57:59)

Quoted 5 lines · Jonas Smedegaard
Quoted 2 lines

Known broken:
- USB

what is broken? any information?

Below is the console output - neither builtin USB1 keyboard nor an external USB USB2 hub with a USB1 keyboard attached are detected:

U-Boot 2019.04-00502-g3a85a96182-dirty (Apr 18 2019 - 17:12:25 +0200) Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: Olimex A64 Teres-I
DRAM:  2 GiB
MMC:   Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
Loading Environment from FAT... OK
In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   No ethernet found.

starting USB...
Bus usb at 1c1b000: USB EHCI 1.00
scanning bus usb at 1c1b000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
=> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
u-boot EHCI Host Controller

Quoted 6 lines
Quoted 4 lines

Company page: https://linux-sunxi.org/Olimex_Teres-A64
Community page: https://linux-sunxi.org/Olimex_Teres-A64
hardware sources:
https://github.com/OLIMEX/DIY-LAPTOP/tree/master/HARDWARE/A64-TERES/TERES-PCB1-A64-MAIN

I usually won't prefer these links in commit message.

Ok, I'll remove those.

Quoted 8 lines
Quoted 8 lines
MAINTAINERS +0 -0
index c77abba1e5..d6ba87a0ba 100644
@@ -319,6 +319,14 @@ F: arch/arm/include/asm/arch-sunxi/
 F:     arch/arm/mach-sunxi/
 F:     board/sunxi/
 
Quoted 8 lines

MAINTAINERS F: arch/arm/include/asm/arch-sunxi/ · line 326

Quoted 5 lines
MAINTAINERS +5 -0
+ARM SUNXI OLIMEX TERES-I
+M:     Jonas Smedegaard <[email protected]>
+M:     Icenowy Zheng <[email protected]>
+S:     Maintained
+T:     git https://salsa.debian.org/js/u-boot

Is there any relation to this tree to Mainline. usually the git tree which are preparing PR's can list like this otherwise no need.

Ok. Probably best I remove that line, then.

- Jonas

Signature · 11 lines
 * Jonas Smedegaard - idealist & Internet-arkitekt
 * Tlf.: +45 40843136  Website: http://dr.jones.dk/

 [x] quote me freely  [ ] ask before reusing  [ ] keep private
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190418/88ca820b/attachment.sig>
#3 lore raw

PATCH v3 1/1 sun50i: a64: Add Olimex A64-Teres-I board initial support

Quoting Jonas Smedegaard (2019-04-18 20:22:28)

Quoted 23 lines

Quoting Jagan Teki (2019-04-18 18:57:59)

Quoted 5 lines · Jonas Smedegaard
Quoted 2 lines

Known broken:
- USB

what is broken? any information?

Below is the console output - neither builtin USB1 keyboard nor an external USB USB2 hub with a USB1 keyboard attached are detected:

U-Boot 2019.04-00502-g3a85a96182-dirty (Apr 18 2019 - 17:12:25 +0200) Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: Olimex A64 Teres-I
DRAM:  2 GiB
MMC:   Device 'mmc at 1c11000': seq 1 is in use by 'mmc at 1c10000'
mmc at 1c0f000: 0, mmc at 1c10000: 2, mmc at 1c11000: 1
Loading Environment from FAT... OK
In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   No ethernet found.
Quoted 9 lines

starting USB...
Bus usb at 1c1b000: USB EHCI 1.00
scanning bus usb at 1c1b000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
=> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
u-boot EHCI Host Controller

...and "dm tree" contains this:

[...]

 regulator    0  [   ]   fixed regulator       |-- usb1-vbus
 regulator    1  [ + ]   fixed regulator       |-- regulator at 0

[...]

Also, if I enable CONFIG_USB_OHCI_HCD (noticing that was done generally for a64 boards recently in commit 29d280c88a), then u-boot hangs just after the "Bus usb at 1c1b000: USB EHCI 1.00".

General question: Is it appropriate to cc this many individuals (resolved by the patman script), or if not which are appropriate?

- Jonas

Signature · 11 lines
 * Jonas Smedegaard - idealist & Internet-arkitekt
 * Tlf.: +45 40843136  Website: http://dr.jones.dk/

 [x] quote me freely  [ ] ask before reusing  [ ] keep private
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190418/9030df0a/attachment.sig>