arm64: allwinner: Enable AXP803's USB power supply
Subsystems (4)
Chen-Yu Tsai
maintainercover arm64: allwinner: Enable AXP803's USB power supply
From: Chen-Yu Tsai <[email protected]>
Hi everyone,
This series follows up on the A83T USB OTG series. The USB power supply portion of the AXP803, the PMIC used with the A64, is identical to the part in the AXP813/AXP818, used with the A83T.
This series enables the USB power supply in the AXP803 using the AXP813's compatible string as a fallback. The per-model compatible string is still added as a contigency.
Patch 1 adds an mfd cell for the USB power supply, to the AXP803.
Patch 2 adds a device node for the USB power supply.
Patch 3 enables the USB power supply on the Bananapi M64.
Unfortunately the original Pine64 does not wire up the USB power supply, and I don't have any other A64 boards.
The mfd patch can go in through the mfd tree. There are no compile-time dependencies. We, sunxi, can take the DT patches.
Please have a look.
Regards
ChenYu
Chen-Yu Tsai (3):
mfd: axp20x: add USB power supply mfd cell to AXP803
arm64: dts: allwinner: axp803: add USB power supply node
arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
arch/arm64/boot/dts/allwinner/axp803.dtsi | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 5 +++++ drivers/mfd/axp20x.c | 5 +++++ 3 files changed, 16 insertions(+)
Signature · 1 line
2.20.1
Chen-Yu Tsai
maintainerPATCH 1/3 mfd: axp20x: add USB power supply mfd cell to AXP803
From: Chen-Yu Tsai <[email protected]>
The AXP803 has a VBUS power input. Its functionality is the same as the one found in the AXP813. Now that the axp20x_usb_power driver supports this variant, we can add an mfd cell for it to use it.
--- drivers/mfd/axp20x.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/mfd/axp20x.c +5 -0
@@ -747,6 +747,11 @@ static const struct mfd_cell axp803_cells[] = { .of_compatible = "x-powers,axp813-ac-power-supply", .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), .resources = axp20x_ac_power_supply_resources, + }, { + .name = "axp20x-usb-power-supply", + .num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources), + .resources = axp803_usb_power_supply_resources, + .of_compatible = "x-powers,axp813-usb-power-supply", }, { .name = "axp20x-regulator" }, };
Signature · 1 line
2.20.1
Lee Jones
AppliedRe: [PATCH 1/3] mfd: axp20x: add USB power supply mfd cell to AXP803
Quoted 10 lines · Chen-Yu Tsai
From: Chen-Yu Tsai <[email protected]>
The AXP803 has a VBUS power input. Its functionality is the same as the one found in the AXP813. Now that the
axp20x_usb_powerdriver supports this variant, we can add an mfd cell for it to use it.Signed-off-by Chen-Yu Tsai <[email protected]>--- drivers/mfd/axp20x.c | 5 +++++ 1 file changed, 5 insertions(+)
Applied, thanks.
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Chen-Yu Tsai
maintainerPATCH 2/3 arm64: dts: allwinner: axp803: add USB power supply node
In reply to Chen-Yu TsaiFrom: Chen-Yu Tsai <[email protected]>
The AXP803 has a VBUS power input. Add a device node for it, now that we support it.
--- arch/arm64/boot/dts/allwinner/axp803.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/allwinner/axp803.dtsi +6 -0
@@ -185,4 +185,10 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp803-usb-power-supply", + "x-powers,axp813-usb-power-supply"; + status = "disabled"; + }; };
Signature · 1 line
2.20.1
Chen-Yu Tsai
maintainerPATCH 3/3 arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
In reply to Chen-Yu TsaiFrom: Chen-Yu Tsai <[email protected]>
The Bananapi M64 has a micro-USB connector with USB OTG support (that is already enabled). VBUS from this connector is wired to the PMIC's VBUS input.
Enable the PMIC's USB power supply on this board, and also hook it up to the USB PHY.
--- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +5 -0
@@ -394,8 +394,13 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; };
Signature · 1 line
2.20.1
Quoted 16 lines · Chen-Yu Tsai
From: Chen-Yu Tsai <[email protected]>
Hi everyone,
This series follows up on the A83T USB OTG series. The USB power supply portion of the AXP803, the PMIC used with the A64, is identical to the part in the AXP813/AXP818, used with the A83T.
This series enables the USB power supply in the AXP803 using the AXP813's compatible string as a fallback. The per-model compatible string is still added as a contigency.
Patch 1 adds an mfd cell for the USB power supply, to the AXP803.
Patch 2 adds a device node for the USB power supply.
Quoted 7 lines
Patch 3 enables the USB power supply on the Bananapi M64.
Unfortunately the original Pine64 does not wire up the USB power supply, and I don't have any other A64 boards.
The mfd patch can go in through the mfd tree. There are no compile-time dependencies. We, sunxi, can take the DT patches.
Applied 2 and 3, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com