5.0.9-stable review
Subsystems (4)
Greg Kroah-Hartman
maintainercover 5.0.9-stable review
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.0.9-rc1
Kaike Wan <[email protected]>
IB/hfi1: Failed to drain send queue when QP is put into error state
Daniel Borkmann <[email protected]>
bpf: fix use after free in bpf_evict_inode
Pi-Hsun Shih <[email protected]>
include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
Chao Yu <[email protected]>
f2fs: fix to add refcount once page is tagged PG_private
Chao Yu <[email protected]>
f2fs: fix to use kvfree instead of kzfree
Chao Yu <[email protected]>
f2fs: fix to dirty inode for i_mode recovery
David Howells <[email protected]>
rxrpc: Fix client call connect/disconnect race
Stanislaw Gruszka <[email protected]>
lib/div64.c: off by one in shift
Ronnie Sahlberg <[email protected]>
cifs: return -ENODATA when deleting an xattr that does not exist
YueHaibing <[email protected]>
appletalk: Fix use-after-free in atalk_proc_exit
Kevin Wang <[email protected]>
drm/amdkfd: use init_mqd function to allocate object for hid_mqd (CI)
Yang Shi <[email protected]>
ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t
Rajneesh Bhardwaj <[email protected]>
platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
Ilia Mirkin <[email protected]>
drm/nouveau/volt/gf117: fix speedo readout register
Jaegeuk Kim <[email protected]>
f2fs: sync filesystem after roll-forward recovery
Bjorn Helgaas <[email protected]>
PCI/ASPM: Save LTR Capability for suspend/resume
Mika Westerberg <[email protected]>
PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
Leo Yan <[email protected]>
coresight: cpu-debug: Support for CA73 CPUs
Wei Hu (Xavier) <[email protected]>
RDMA/hns: Fix the Oops during rmmod or insmod ko when reset occurs
Zhang Rui <[email protected]>
Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"
Lars Persson <[email protected]>
crypto: axis - fix for recursive locking from bottom half
Huazhong Tan <[email protected]>
net: hns3: Fix NULL deref when unloading driver
Hsin-Yi, Wang <[email protected]>
drm/panel: panel-innolux: set display off in innolux_panel_unprepare
wentalou <[email protected]>
drm/amdgpu: psp_ring_destroy cause psp->km_ring.ring_mem NULL
Christophe Leroy <[email protected]>
lkdtm: Add tests for NULL pointer dereference
Christophe Leroy <[email protected]>
lkdtm: Print real addresses
Darrick J. Wong <[email protected]>
ext4: prohibit fstrim in norecovery mode
Kairui Song <[email protected]>
x86/gart: Exclude GART aperture from kcore
Paulo Alcantara (SUSE) <[email protected]>
cifs: Fix slab-out-of-bounds when tracing SMB tcon
Steve French <[email protected]>
fix incorrect error code mapping for OBJECTID_NOT_FOUND
Xiaoli Feng <[email protected]>
cifs: fix that return -EINVAL when do dedupe operation
Nathan Chancellor <[email protected]>
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
Lu Baolu <[email protected]>
iommu/vt-d: Save the right domain ID used by hardware
Lu Baolu <[email protected]>
iommu/vt-d: Check capability before disabling protected memory
YueHaibing <[email protected]>
drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
Matthew Whitehead <[email protected]>
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
Kangjie Lu <[email protected]>
x86/hyperv: Prevent potential NULL pointer dereference
Aditya Pakki <[email protected]>
x86/hpet: Prevent potential NULL pointer dereference
Jianguo Chen <[email protected]>
irqchip/mbigen: Don't clear eventid when freeing an MSI
Fabien Dessenne <[email protected]>
irqchip/stm32: Don't set rising configuration registers at init
Fabien Dessenne <[email protected]>
irqchip/stm32: Don't clear rising/falling config registers at init
Andrzej Hajda <[email protected]>
drm/exynos/mixer: fix MIXER shadow registry synchronisation code
Bart Van Assche <[email protected]>
blk-iolatency: #include "blk.h"
Jiada Wang <[email protected]>
PM / Domains: Avoid a potential deadlock
Andy Shevchenko <[email protected]>
ACPI / utils: Drop reference in test for device presence
Changbin Du <[email protected]>
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
Changbin Du <[email protected]>
perf tests: Fix memory leak by expr__find_other() in test__expr()
Changbin Du <[email protected]>
perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test
Arnaldo Carvalho de Melo <[email protected]>
perf evsel: Free evsel->counts in perf_evsel__exit()
Changbin Du <[email protected]>
perf top: Fix global-buffer-overflow issue
Changbin Du <[email protected]>
perf maps: Purge all maps from the 'names' tree
Changbin Du <[email protected]>
perf map: Remove map from 'names' tree in __maps__remove()
Changbin Du <[email protected]>
perf hist: Add missing map__put() in error case
Changbin Du <[email protected]>
perf top: Fix error handling in cmd_top()
Changbin Du <[email protected]>
perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue
Changbin Du <[email protected]>
perf build-id: Fix memory leak in print_sdt_events()
Changbin Du <[email protected]>
perf config: Fix a memory leak in collect_config()
Changbin Du <[email protected]>
perf config: Fix an error in the config template documentation
Changbin Du <[email protected]>
perf tools: Fix errors under optimization level '-Og'
Changbin Du <[email protected]>
perf list: Don't forget to drop the reference to the allocated thread_map
Andi Kleen <[email protected]>
perf stat: Fix --no-scale
Himanshu Madhani <[email protected]>
scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
Bart Van Assche <[email protected]>
scsi: core: Also call destroy_rcu_head() for passthrough requests
David Arcari <[email protected]>
tools/power turbostat: return the exit status of a command
Matteo Croce <[email protected]>
x86/mm: Don't leak kernel addresses
Konstantin Khlebnikov <[email protected]>
sched/core: Fix buffer overflow in cgroup2 property cpu.max
Peter Zijlstra <[email protected]>
sched/cpufreq: Fix 32-bit math overflow
Maurizio Lombardi <[email protected]>
scsi: iscsi: flush running unbind operations when removing a session
Zhang Rui <[email protected]>
thermal/intel_powerclamp: fix truncated kthread name
Matthew Garrett <[email protected]>
thermal/int340x_thermal: fix mode setting
Matthew Garrett <[email protected]>
thermal/int340x_thermal: Add additional UUIDs
Phil Elwell <[email protected]>
thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
Marek Szyprowski <[email protected]>
thermal: samsung: Fix incorrect check after code merge
Luc Van Oostenryck <[email protected]>
thermal/intel_powerclamp: fix __percpu declaration of worker_data
Jens Axboe <[email protected]>
paride/pcd: cleanup queues when detection fails
Jens Axboe <[email protected]>
paride/pf: cleanup queues when detection fails
Colin Ian King <[email protected]>
ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
Arnd Bergmann <[email protected]>
mmc: davinci: remove extraneous __init annotation
Feng Tang <[email protected]>
i40iw: Avoid panic when handling the inetdev event
Jack Morgenstein <[email protected]>
IB/mlx4: Fix race condition between catas error reset and aliasguid flows
Dave Airlie <[email protected]>
drm/udl: use drm_gem_object_put_unlocked.
Andy Shevchenko <[email protected]>
auxdisplay: hd44780: Fix memory leak on ->remove()
Kangjie Lu <[email protected]>
ALSA: sb8: add a check for request_region
Kangjie Lu <[email protected]>
ALSA: echoaudio: add a check for ioremap_nocache
Lukas Czerner <[email protected]>
ext4: report real fs size after failed resize
Lukas Czerner <[email protected]>
ext4: add missing brelse() in add_new_gdb_meta_bg()
Jan Kara <[email protected]>
ext4: avoid panic during forced reboot
Petr Štetiar <[email protected]>
mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
Jiri Olsa <[email protected]>
perf data: Don't store auxtrace index for directory data file
Stephane Eranian <[email protected]>
perf/core: Restore mmap record type correctly
ZhangXiaoxu <[email protected]>
inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()
Corentin Labbe <[email protected]>
arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM
Eugeniy Paltsev <[email protected]>
ARC: u-boot args: check that magic number is correct
-------------
Diffstat:
Makefile | 4 +- arch/arc/configs/hsdk_defconfig | 1 + arch/arc/kernel/head.S | 1 + arch/arc/kernel/setup.c | 8 ++ arch/arm/kernel/patch.c | 6 +- arch/mips/bcm47xx/workarounds.c | 1 + arch/x86/hyperv/hv_init.c | 6 +- arch/x86/kernel/aperture_64.c | 20 ++-- arch/x86/kernel/cpu/cyrix.c | 14 +-- arch/x86/kernel/hpet.c | 2 + arch/x86/kernel/hw_breakpoint.c | 1 + arch/x86/kernel/mpparse.c | 4 +- block/blk-iolatency.c | 1 + drivers/acpi/ec.c | 53 ++++++++++ drivers/acpi/utils.c | 1 + drivers/auxdisplay/hd44780.c | 2 + drivers/base/power/domain.c | 13 ++- drivers/block/paride/pcd.c | 6 +- drivers/block/paride/pf.c | 16 ++- drivers/crypto/axis/artpec6_crypto.c | 28 +++++- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_cik.c | 52 +--------- drivers/gpu/drm/exynos/exynos_mixer.c | 110 ++++++++++++--------- drivers/gpu/drm/nouveau/include/nvkm/subdev/volt.h | 1 + drivers/gpu/drm/nouveau/nouveau_debugfs.c | 2 +- drivers/gpu/drm/nouveau/nvkm/engine/device/base.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/volt/Kbuild | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/volt/gf117.c | 60 +++++++++++ drivers/gpu/drm/panel/panel-innolux-p079zca.c | 11 +-- drivers/gpu/drm/udl/udl_gem.c | 2 +- drivers/hwtracing/coresight/coresight-cpu-debug.c | 4 + drivers/infiniband/hw/hfi1/qp.c | 2 +- drivers/infiniband/hw/hns/hns_roce_device.h | 21 ++++ drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 103 ++++++++++++++++--- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 1 + drivers/infiniband/hw/i40iw/i40iw_utils.c | 12 ++- drivers/infiniband/hw/mlx4/alias_GUID.c | 2 +- drivers/iommu/intel-iommu.c | 5 +- drivers/irqchip/irq-mbigen.c | 3 + drivers/irqchip/irq-stm32-exti.c | 10 -- drivers/misc/lkdtm/core.c | 2 + drivers/misc/lkdtm/lkdtm.h | 2 + drivers/misc/lkdtm/perms.c | 36 +++++-- drivers/mmc/host/davinci_mmc.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 28 ++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 20 +--- .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 8 +- .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h | 4 +- drivers/pci/pci.c | 75 +++++++++++++- drivers/platform/x86/intel_pmc_core.c | 34 +++++++ drivers/platform/x86/intel_pmc_core.h | 5 + drivers/scsi/qla2xxx/qla_os.c | 2 +- drivers/scsi/scsi_lib.c | 9 +- drivers/scsi/scsi_transport_iscsi.c | 2 + drivers/thermal/broadcom/bcm2835_thermal.c | 9 +- .../intel/int340x_thermal/int3400_thermal.c | 21 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +- drivers/thermal/samsung/exynos_tmu.c | 2 +- fs/cifs/cifsfs.c | 2 +- fs/cifs/smb2maperror.c | 3 +- fs/cifs/smb2ops.c | 10 ++ fs/cifs/trace.h | 6 +- fs/ext4/ioctl.c | 7 ++ fs/ext4/resize.c | 17 +++- fs/ext4/super.c | 16 ++- fs/f2fs/checkpoint.c | 9 +- fs/f2fs/data.c | 21 ++-- fs/f2fs/dir.c | 2 +- fs/f2fs/f2fs.h | 21 ++++ fs/f2fs/file.c | 5 +- fs/f2fs/node.c | 6 +- fs/f2fs/segment.c | 9 +- fs/f2fs/super.c | 44 ++++++--- fs/f2fs/xattr.c | 10 +- fs/notify/inotify/inotify_user.c | 7 +- fs/proc/kcore.c | 27 +++++ include/linux/atalk.h | 2 +- include/linux/kcore.h | 2 + include/linux/swap.h | 4 +- include/trace/events/rxrpc.h | 2 + kernel/bpf/inode.c | 32 +++--- kernel/events/core.c | 2 + kernel/sched/core.c | 2 +- kernel/sched/cpufreq_schedutil.c | 59 +++++------ lib/div64.c | 4 +- net/appletalk/atalk_proc.c | 2 +- net/appletalk/ddp.c | 37 +++++-- net/appletalk/sysctl_net_atalk.c | 5 +- net/rxrpc/conn_client.c | 20 +++- sound/drivers/opl3/opl3_voice.h | 2 +- sound/isa/sb/sb8.c | 4 + sound/pci/echoaudio/echoaudio.c | 5 + tools/lib/bpf/libbpf.c | 2 +- tools/perf/Documentation/perf-config.txt | 2 +- tools/perf/Documentation/perf-stat.txt | 5 +- tools/perf/bench/epoll-ctl.c | 2 +- tools/perf/bench/epoll-wait.c | 2 +- tools/perf/builtin-record.c | 2 +- tools/perf/builtin-stat.c | 3 +- tools/perf/builtin-top.c | 47 +++++---- tools/perf/tests/backward-ring-buffer.c | 2 +- tools/perf/tests/evsel-tp-sched.c | 1 + tools/perf/tests/expr.c | 5 +- tools/perf/tests/openat-syscall-all-cpus.c | 4 +- tools/perf/util/build-id.c | 1 + tools/perf/util/config.c | 3 +- tools/perf/util/evsel.c | 4 +- tools/perf/util/hist.c | 4 +- tools/perf/util/map.c | 18 ++++ tools/perf/util/ordered-events.c | 2 + tools/perf/util/parse-events.c | 2 + tools/perf/util/stat.c | 12 +-- tools/power/x86/turbostat/turbostat.c | 3 + 114 files changed, 996 insertions(+), 397 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/93 ARC: u-boot args: check that magic number is correct
[ Upstream commit edb64bca50cd736c6894cc6081d5263c007ce005 ]
In case of devboards we really often disable bootloader and load Linux image in memory via JTAG. Even if kernel tries to verify uboot_tag and uboot_arg there is sill a chance that we treat some garbage in registers as valid u-boot arguments in JTAG case. E.g. it is enough to have '1' in r0 to treat any value in r2 as a boot command line.
So check that magic number passed from u-boot is correct and drop u-boot arguments otherwise. That helps to reduce the possibility of using garbage as u-boot arguments in JTAG case.
We can safely check U-boot magic value (0x0) in linux passed via r1 register as U-boot pass it from the beginning. So there is no backward-compatibility issues.
--- arch/arc/kernel/head.S | 1 + arch/arc/kernel/setup.c | 8 ++++++++ 2 files changed, 9 insertions(+)
arch/arc/kernel/head.S +1 -0
@@ -106,6 +106,7 @@ ENTRY(stext) ; r2 = pointer to uboot provided cmdline or external DTB in mem ; These are handled later in handle_uboot_args() st r0, [@uboot_tag] + st r1, [@uboot_magic] st r2, [@uboot_arg] ; setup "current" tsk and optionally cache it in dedicated r25
arch/arc/kernel/setup.c +8 -0
@@ -36,6 +36,7 @@ unsigned int intr_to_DE_cnt;/* Part of U-boot ABI: see head.S */ int __initdata uboot_tag; +int __initdata uboot_magic;char __initdata *uboot_arg;const struct machine_desc *machine_desc;
@@ -497,6 +498,8 @@ static inline bool uboot_arg_invalid(unsigned long addr)#define UBOOT_TAG_NONE 0#define UBOOT_TAG_CMDLINE 1#define UBOOT_TAG_DTB 2 +/* We always pass 0 as magic from U-boot */ +#define UBOOT_MAGIC_VALUE 0void __init handle_uboot_args (void ) {
@@ -511,6 +514,11 @@ void __init handle_uboot_args(void) goto ignore_uboot_args; } +if (uboot_magic !=UBOOT_MAGIC_VALUE ) { +pr_warn (IGNORE_ARGS "non zero uboot magic\n" ); + goto ignore_uboot_args; + } +if (uboot_tag !=UBOOT_TAG_NONE &&uboot_arg_invalid ((unsigned long )uboot_arg)) {pr_warn (IGNORE_ARGS "invalid uboot arg: '%px'\n" , uboot_arg);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 2/93 arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM
In reply to Greg Kroah-Hartman[ Upstream commit 0728aeb7ead99a9b0dac2f3c92b3752b4e02ff97 ]
We have now a HSDK device in our kernelci lab, but kernel builded via the hsdk_defconfig lacks ramfs supports, so it cannot boot kernelci jobs yet.
So this patch enable CONFIG_BLK_DEV_RAM in hsdk_defconfig.
--- arch/arc/configs/hsdk_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arc/configs/hsdk_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 3/93 inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()
In reply to Greg Kroah-Hartman[ Upstream commit 62c9d2674b31d4c8a674bee86b7edc6da2803aea ]
Commit 4d97f7d53da7dc83 ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()") forgot to call fsnotify_put_mark() with IN_MASK_CREATE after fsnotify_find_mark()
--- fs/notify/inotify/inotify_user.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
fs/notify/inotify/inotify_user.c +5 -2
@@ -519,8 +519,10 @@ static int inotify_update_existing_watch(struct fsnotify_group *group, fsn_mark =fsnotify_find_mark (&inode->i_fsnotify_marks, group);if (!fsn_mark)return -ENOENT ; -else if (create) -return -EEXIST ; +else if (create) { + ret = -EEXIST ; + goto out; + } i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark);
@@ -548,6 +550,7 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,/* return the wd */ ret = i_mark->wd; +out:/* match the get from fsnotify_find_mark() */ fsnotify_put_mark (fsn_mark);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 4/93 perf/core: Restore mmap record type correctly
In reply to Greg Kroah-Hartman[ Upstream commit d9c1bb2f6a2157b38e8eb63af437cb22701d31ee ]
On mmap(), perf_events generates a RECORD_MMAP record and then checks which events are interested in this record. There are currently 2 versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger. The event configuration controls which version the user level tool accepts.
If the event->attr.mmap2=1 field then MMAP2 record is returned. The perf_event_mmap_output() takes care of this. It checks attr->mmap2 and corrects the record fields before putting it in the sampling buffer of the event. At the end the function restores the modified MMAP record fields.
The problem is that the function restores the size but not the type. Thus, if a subsequent event only accepts MMAP type, then it would instead receive an MMAP2 record with a size of MMAP record.
This patch fixes the problem by restoring the record type on exit.
--- kernel/events/core.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/events/core.c +2 -0
@@ -7178,6 +7178,7 @@ static void perf_event_mmap_output(struct perf_event *event,struct perf_output_handle handle;struct perf_sample_data sample;int size = mmap_event->event_id.header.size; +u32 type = mmap_event->event_id.header.type;int ret;if (!perf_event_mmap_match (event, data))
@@ -7221,6 +7222,7 @@ static void perf_event_mmap_output(struct perf_event *event,perf_output_end (&handle); out: mmap_event->event_id.header.size = size; + mmap_event->event_id.header.type = type; }static void perf_event_mmap_event (struct perf_mmap_event *mmap_event)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 5/93 perf data: Dont store auxtrace index for directory data file
In reply to Greg Kroah-Hartman[ Upstream commit cd3dd8dd8ff62374d90cb3f2e54b8c94106c7810 ]
We can't store the auxtrace index when we store into multiple files, because we keep only offset for it, not the file.
The auxtrace data will be processed correctly in the 'pipe' mode.
--- tools/perf/builtin-record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/builtin-record.c +1 -1
@@ -386,7 +386,7 @@ static int record__process_auxtrace(struct perf_tool *tool,size_t padding;u8 pad[8 ] = {0 }; -if (!perf_data__is_pipe (data)) { +if (!perf_data__is_pipe (data) && !perf_data__is_dir (data)) {off_t file_offset;int fd =perf_data__fd (data);int err;
Signature · 1 line
2.19.1
Re: [PATCH 5.0 05/93] perf data: Dont store auxtrace index for directory data file
Quoted 27 lines · Greg Kroah-Hartman
[ Upstream commit
cd3dd8dd8ff62374d90cb3f2e54b8c94106c7810]We can't store the auxtrace index when we store into multiple files, because we keep only offset for it, not the file.
The auxtrace data will be processed correctly in the 'pipe' mode.
Signed-off-by Jiri Olsa <[email protected]>Cc Adrian Hunter <[email protected]>Cc Alexander Shishkin <[email protected]>Cc Alexey Budankov <[email protected]>Cc Andi Kleen <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Stephane Eranian <[email protected]>Signed-off-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- tools/perf/builtin-record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/builtin-record.c +0
-0
tools/perf/builtin-record.c static int record__process_auxtrace(struct perf_tool *tool, · line 389
Quoted 5 lines
tools/perf/builtin-record.c +1
-1@@ -386,7 +386,7 @@ static int record__process_auxtrace(struct perf_tool *tool,size_t padding;u8 pad[8 ] = {0 }; -if (!perf_data__is_pipe (data)) { +if (!perf_data__is_pipe (data) && !perf_data__is_dir (data)) {
This causes the following build error on 5.0:
builtin-top.c: In function ‘__cmd_top’:
builtin-top.c:1241:3: error: label ‘out_delete’ used but not defined
goto out_delete;
^~~~
builtin-record.c: In function ‘record__process_auxtrace’:
builtin-record.c:389:36: error: implicit declaration of function ‘perf_data__is_dir’; did you mean ‘perf_data__is_pipe’? [-Werror=implicit-function-declaration]
if (!perf_data__is_pipe(data) && !perf_data__is_dir(data)) {
^~~~~~~~~~~~~~~~~
perf_data__is_pipe
builtin-record.c:389:36: error: nested extern declaration of ‘perf_data__is_dir’ [-Werror=nested-externs]
Dropping the patch solves this error, though there is a second perf related build error in this RC caused by 2c0bd03b5d20 ("perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue").
Quoted 8 lines
tools/perf/builtin-record.c +0
-0off_t file_offset;int fd =perf_data__fd (data);int err;Signature · 1 line
2.19.1
Signature · 1 line
Linaro - Kernel Validation
Re: [PATCH 5.0 05/93] perf data: Dont store auxtrace index for directory data file
In reply to Greg Kroah-HartmanDen 18-04-2019 kl. 20:56, skrev Greg Kroah-Hartman:
Quoted 28 lines
[ Upstream commit
cd3dd8dd8ff62374d90cb3f2e54b8c94106c7810]We can't store the auxtrace index when we store into multiple files, because we keep only offset for it, not the file.
The auxtrace data will be processed correctly in the 'pipe' mode.
Signed-off-by Jiri Olsa <[email protected]>Cc Adrian Hunter <[email protected]>Cc Alexander Shishkin <[email protected]>Cc Alexey Budankov <[email protected]>Cc Andi Kleen <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Stephane Eranian <[email protected]>Signed-off-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- tools/perf/builtin-record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/builtin-record.c +0
-0
tools/perf/builtin-record.c static int record__process_auxtrace(struct perf_tool *tool, · line 392
Quoted 8 lines
tools/perf/builtin-record.c +1
-1@@ -386,7 +386,7 @@ static int record__process_auxtrace(struct perf_tool *tool,size_t padding;u8 pad[8 ] = {0 }; -if (!perf_data__is_pipe (data)) { +if (!perf_data__is_pipe (data) && !perf_data__is_dir (data)) {off_t file_offset;int fd =perf_data__fd (data);int err;
This breaks the build with:
builtin-record.c: In function 'record__process_auxtrace':
builtin-record.c:389:36: warning: implicit declaration of function 'perf_data__is_dir'; did you mean 'perf_data__is_pipe'? [-Wimplicit-function-declaration]
if (!perf_data__is_pipe(data) && !perf_data__is_dir(data)) {
^~~~~~~~~~~~~~~~~Looks like it depends atleast on:
commit ec65def1045e4c7817b7f741a86dadae82877a93
Author: Jiri Olsa <[email protected]> Date: Fri Mar 8 14:47:35 2019 +0100
perf data: Support having perf.data stored as a directory
Maybe better to drop it.
--
Thomas
Sasha Levin
maintainerRe: [PATCH 5.0 05/93] perf data: Dont store auxtrace index for directory data file
Quoted 47 lines · Thomas Backlund
Den 18-04-2019 kl. 20:56, skrev Greg Kroah-Hartman:
Quoted 27 lines
[ Upstream commit
cd3dd8dd8ff62374d90cb3f2e54b8c94106c7810]We can't store the auxtrace index when we store into multiple files, because we keep only offset for it, not the file.
The auxtrace data will be processed correctly in the 'pipe' mode.
Signed-off-by Jiri Olsa <[email protected]>Cc Adrian Hunter <[email protected]>Cc Alexander Shishkin <[email protected]>Cc Alexey Budankov <[email protected]>Cc Andi Kleen <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Stephane Eranian <[email protected]>Signed-off-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- tools/perf/builtin-record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/builtin-record.c +0
-0tools/perf/builtin-record.c static int record__process_auxtrace(struct perf_tool *tool, · line 392
Quoted 8 lines
tools/perf/builtin-record.c +1
-1@@ -386,7 +386,7 @@ static int record__process_auxtrace(struct perf_tool *tool,size_t padding;u8 pad[8 ] = {0 }; -if (!perf_data__is_pipe (data)) { +if (!perf_data__is_pipe (data) && !perf_data__is_dir (data)) {off_t file_offset;int fd =perf_data__fd (data);int err;This breaks the build with:
builtin-record.c: In function 'record__process_auxtrace':
builtin-record.c:389:36: warning: implicit declaration of function 'perf_data__is_dir'; did you mean 'perf_data__is_pipe'? [-Wimplicit-function-declaration]if (!perf_data__is_pipe(data) && !perf_data__is_dir(data)) { ^~~~~~~~~~~~~~~~~Looks like it depends atleast on:
Quoted 8 lines
commit
ec65def1045e4c7817b7f741a86dadae82877a93Author: Jiri Olsa <[email protected]> Date: Fri Mar 8 14:47:35 2019 +0100perf data: Support having perf.data stored as a directory
Maybe better to drop it.
I've dropped it, thanks!
--
Thanks,
Sasha
Re: [PATCH 5.0 05/93] perf data: Dont store auxtrace index for directory data file
Quoted 54 lines · Sasha Levin
Quoted 53 lines · Thomas Backlund
Den 18-04-2019 kl. 20:56, skrev Greg Kroah-Hartman:
Quoted 27 lines
[ Upstream commit
cd3dd8dd8ff62374d90cb3f2e54b8c94106c7810]We can't store the auxtrace index when we store into multiple files, because we keep only offset for it, not the file.
The auxtrace data will be processed correctly in the 'pipe' mode.
Signed-off-by Jiri Olsa <[email protected]>Cc Adrian Hunter <[email protected]>Cc Alexander Shishkin <[email protected]>Cc Alexey Budankov <[email protected]>Cc Andi Kleen <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Stephane Eranian <[email protected]>Signed-off-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- tools/perf/builtin-record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/perf/builtin-record.c +0
-0tools/perf/builtin-record.c static int record__process_auxtrace(struct perf_tool *tool, · line 392
Quoted 8 lines
tools/perf/builtin-record.c +1
-1@@ -386,7 +386,7 @@ static int record__process_auxtrace(struct perf_tool *tool,size_t padding;u8 pad[8 ] = {0 }; -if (!perf_data__is_pipe (data)) { +if (!perf_data__is_pipe (data) && !perf_data__is_dir (data)) {off_t file_offset;int fd =perf_data__fd (data);int err;This breaks the build with:
builtin-record.c: In function 'record__process_auxtrace':
builtin-record.c:389:36: warning: implicit declaration of function 'perf_data__is_dir'; did you mean 'perf_data__is_pipe'? [-Wimplicit-function-declaration]if (!perf_data__is_pipe(data) && !perf_data__is_dir(data)) { ^~~~~~~~~~~~~~~~~Looks like it depends atleast on:
commit
ec65def1045e4c7817b7f741a86dadae82877a93Author: Jiri Olsa <[email protected]> Date: Fri Mar 8 14:47:35 2019 +0100
Quoted 6 lines
Quoted 4 lines
perf data: Support having perf.data stored as a directory
Maybe better to drop it.
I've dropped it, thanks!
yes, no harm to drop this one if the perf_data__is_dir is not backported
jirka
Greg Kroah-Hartman
maintainerPATCH 6/93 mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
In reply to Greg Kroah-Hartman[ Upstream commit cdb8faa00e3fcdd0ad10add743516d616dc7d38e ]
Eric has reported on OpenWrt's bug tracking system[1], that he's not able to use USB devices on his WNDR3400v2 device after the boot, until he turns on GPIO #21 manually through sysfs.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
--- arch/mips/bcm47xx/workarounds.c | 1 + 1 file changed, 1 insertion(+)
arch/mips/bcm47xx/workarounds.c +1 -0
@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)case BCM47XX_BOARD_NETGEAR_WNR3500L :bcm47xx_workarounds_enable_usb_power (12 );break ; +case BCM47XX_BOARD_NETGEAR_WNDR3400V2 :case BCM47XX_BOARD_NETGEAR_WNDR3400_V3 :bcm47xx_workarounds_enable_usb_power (21 );break ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 7/93 ext4: avoid panic during forced reboot
In reply to Greg Kroah-Hartman[ Upstream commit 1dc1097ff60e4105216da7cd0aa99032b039a994 ]
When admin calls "reboot -f" - i.e., does a hard system reboot by directly calling reboot(2) - ext4 filesystem mounted with errors=panic can panic the system. This happens because the underlying device gets disabled without unmounting the filesystem and thus some syscall running in parallel to reboot(2) can result in the filesystem getting IO errors.
This is somewhat surprising to the users so try improve the behavior by switching to errors=remount-ro behavior when the system is running reboot(2).
--- fs/ext4/super.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
fs/ext4/super.c +13 -3
@@ -430,6 +430,12 @@ static void ext4_journal_commit_callback(journal_t *journal, transaction_t *txn)spin_unlock (&sbi->s_md_lock); } +static bool system_going_down (void ) +{ +return system_state ==SYSTEM_HALT || system_state ==SYSTEM_POWER_OFF + || system_state ==SYSTEM_RESTART ; +} +/* Deal with the reporting of failure conditions on a filesystem such as * inconsistencies detected or read IO failures. *
@@ -460,7 +466,12 @@ static void ext4_handle_error(struct super_block *sb)if (journal)jbd2_journal_abort (journal, -EIO ); } -if (test_opt (sb,ERRORS_RO )) { +/* +* We force ERRORS_RO behavior when system is rebooting. Otherwise we +* could panic during 'reboot -f' as the underlying device got already +* disabled. +*/ +if (test_opt (sb,ERRORS_RO ) ||system_going_down ()) {ext4_msg (sb,KERN_CRIT ,"Remounting filesystem read-only" );/* * Make sure updated value of ->s_mount_flags will be visible
@@ -468,8 +479,7 @@ static void ext4_handle_error(struct super_block *sb)*/ smp_wmb (); sb->s_flags |=SB_RDONLY ; - } -if (test_opt (sb,ERRORS_PANIC )) { + }else if (test_opt (sb,ERRORS_PANIC )) {if (EXT4_SB (sb)->s_journal && !(EXT4_SB (sb)->s_journal->j_flags &JBD2_REC_ERR ))return ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 8/93 ext4: add missing brelse() in add_new_gdb_meta_bg()
In reply to Greg Kroah-Hartman[ Upstream commit d64264d6218e6892edd832dc3a5a5857c2856c53 ]
Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh in case ext4_journal_get_write_access() fails.
Additionally kvfree() is missing in the same error path. Fix it by moving the ext4_journal_get_write_access() before the ext4 sb update as Ted suggested and release n_group_desc and gdb_bh in case it fails.
--- fs/ext4/resize.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
fs/ext4/resize.c +9 -2
@@ -932,11 +932,18 @@ static int add_new_gdb_meta_bg(struct super_block *sb,memcpy (n_group_desc, o_group_desc,EXT4_SB (sb)->s_gdb_count *sizeof (struct buffer_head *)); n_group_desc[gdb_num] = gdb_bh; + +BUFFER_TRACE (gdb_bh,"get_write_access" ); + err =ext4_journal_get_write_access (handle, gdb_bh); +if (err) { +kvfree (n_group_desc); +brelse (gdb_bh); +return err; + } +EXT4_SB (sb)->s_group_desc = n_group_desc;EXT4_SB (sb)->s_gdb_count++;kvfree (o_group_desc); -BUFFER_TRACE (gdb_bh,"get_write_access" ); - err =ext4_journal_get_write_access (handle, gdb_bh);return err; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 9/93 ext4: report real fs size after failed resize
In reply to Greg Kroah-Hartman[ Upstream commit 6c7328400e0488f7d49e19e02290ba343b6811b2 ]
Currently when the file system resize using ext4_resize_fs() fails it will report into log that "resized filesystem to <requested block count>". However this may not be true in the case of failure. Use the current block count as returned by ext4_blocks_count() to report the block count.
Additionally, report a warning that "error occurred during file system resize"
--- fs/ext4/resize.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
fs/ext4/resize.c +5 -1
@@ -2080,6 +2080,10 @@ int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count)free_flex_gd (flex_gd);if (resize_inode !=NULL )iput (resize_inode); -ext4_msg (sb,KERN_INFO ,"resized filesystem to %llu" , n_blocks_count); +if (err) +ext4_warning (sb,"error (%d) occurred during " +"file system resize" , err); +ext4_msg (sb,KERN_INFO ,"resized filesystem to %llu" , +ext4_blocks_count (es));return err; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 10/93 ALSA: echoaudio: add a check for ioremap_nocache
In reply to Greg Kroah-Hartman[ Upstream commit 6ade657d6125ec3ec07f95fa51e28138aef6208f ]
In case ioremap_nocache fails, the fix releases chip and returns an error code upstream to avoid NULL pointer dereference.
--- sound/pci/echoaudio/echoaudio.c | 5 +++++ 1 file changed, 5 insertions(+)
sound/pci/echoaudio/echoaudio.c +5 -0
@@ -1954,6 +1954,11 @@ static int snd_echo_create(struct snd_card *card, } chip->dsp_registers = (volatile u32 __iomem *)ioremap_nocache (chip->dsp_registers_phys, sz); +if (!chip->dsp_registers) { +dev_err (chip->card->dev,"ioremap failed\n" ); +snd_echo_free (chip); +return -ENOMEM ; + }if (request_irq (pci->irq, snd_echo_interrupt,IRQF_SHARED ,KBUILD_MODNAME , chip)) {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 11/93 ALSA: sb8: add a check for request_region
In reply to Greg Kroah-Hartman[ Upstream commit dcd0feac9bab901d5739de51b3f69840851f8919 ]
In case request_region fails, the fix returns an error code to avoid NULL pointer dereference.
--- sound/isa/sb/sb8.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/isa/sb/sb8.c +4 -0
@@ -111,6 +111,10 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev)/* block the 0x388 port to avoid PnP conflicts */ acard->fm_res =request_region (0x388 ,4 ,"SoundBlaster FM" ); +if (!acard->fm_res) { + err = -EBUSY ; + goto _err; + } if (port[dev] != SNDRV_AUTO_PORT) { if ((err = snd_sbdsp_create(card, port[dev], irq[dev],
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 12/93 auxdisplay: hd44780: Fix memory leak on ->remove()
In reply to Greg Kroah-Hartman[ Upstream commit 41c8d0adf3c4df1867d98cee4a2c4531352a33ad ]
We have to free on ->remove() the allocated resources on ->probe().
--- drivers/auxdisplay/hd44780.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/auxdisplay/hd44780.c +2 -0
@@ -280,6 +280,8 @@ static int hd44780_remove(struct platform_device *pdev)struct charlcd *lcd =platform_get_drvdata (pdev);charlcd_unregister (lcd); + +kfree (lcd);return 0 ; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 13/93 drm/udl: use drm_gem_object_put_unlocked.
In reply to Greg Kroah-Hartman[ Upstream commit 8f3b487685b2acf71b42bb30d68fd9271bec8695 ]
When Daniel removed struct_mutex he didn't fix this call to the unlocked variant which is required since we no longer use struct mutex.
This fixes a bunch of:
WARNING: CPU: 4 PID: 1370 at drivers/gpu/drm/drm_gem.c:931 drm_gem_object_put+0x2b/0x30 [drm] Modules linked in: udl xt_CHECKSUM ipt_MASQUERADE tun bridge stp llc nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t> CPU: 4 PID: 1370 Comm: Xorg Not tainted 5.0.0+ #2
backtraces when you plug in a udl device.
--- drivers/gpu/drm/udl/udl_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/udl/udl_gem.c +1 -1
@@ -224,7 +224,7 @@ int udl_gem_mmap(struct drm_file *file, struct drm_device *dev, *offset =drm_vma_node_offset_addr (&gobj->base.vma_node); out: -drm_gem_object_put (&gobj->base); +drm_gem_object_put_unlocked (&gobj->base); unlock:mutex_unlock (&udl->gem_lock);return ret;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 14/93 IB/mlx4: Fix race condition between catas error reset and aliasguid flows
In reply to Greg Kroah-Hartman[ Upstream commit 587443e7773e150ae29e643ee8f41a1eed226565 ]
Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow.
--- drivers/infiniband/hw/mlx4/alias_GUID.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/mlx4/alias_GUID.c +1 -1
@@ -804,8 +804,8 @@ void mlx4_ib_destroy_alias_guid_service(struct mlx4_ib_dev *dev)unsigned long flags;for (i =0 ; i < dev->num_ports; i++) { -cancel_delayed_work (&dev->sriov.alias_guid.ports_guid[i].alias_guid_work); det = &sriov->alias_guid.ports_guid[i]; +cancel_delayed_work_sync (&det->alias_guid_work);spin_lock_irqsave (&sriov->alias_guid.ag_work_lock, flags);while (!list_empty (&det->cb_list)) { cb_ctx = list_entry(det->cb_list.next,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 15/93 i40iw: Avoid panic when handling the inetdev event
In reply to Greg Kroah-Hartman[ Upstream commit ec4fe4bcc584b55e24e8d1768f5510a62c0fd619 ]
There is a panic reported that on a system with x722 ethernet, when doing the operations like:
# ip link add br0 type bridge # ip link set eno1 master br0 # systemctl restart systemd-networkd
The system will panic "BUG: unable to handle kernel null pointer dereference at 0000000000000034", with call chain:
i40iw_inetaddr_event notifier_call_chain blocking_notifier_call_chain notifier_call_chain __inet_del_ifa inet_rtm_deladdr rtnetlink_rcv_msg netlink_rcv_skb rtnetlink_rcv netlink_unicast netlink_sendmsg sock_sendmsg __sys_sendto
It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while the in->ifa_list is NULL.
So add a check for the "in->ifa_list == NULL" case, and skip the ARP operation accordingly.
--- drivers/infiniband/hw/i40iw/i40iw_utils.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/infiniband/hw/i40iw/i40iw_utils.c +11 -1
@@ -173,7 +173,12 @@ int i40iw_inetaddr_event(struct notifier_block *notifier,rcu_read_lock (); in =__in_dev_get_rcu (upper_dev); - local_ipaddr =ntohl (in->ifa_list->ifa_address); + +if (!in->ifa_list) + local_ipaddr =0 ; +else + local_ipaddr =ntohl (in->ifa_list->ifa_address); +rcu_read_unlock (); }else { local_ipaddr =ntohl (ifa->ifa_address);
@@ -185,6 +190,11 @@ int i40iw_inetaddr_event(struct notifier_block *notifier,case NETDEV_UP :/* Fall through */ case NETDEV_CHANGEADDR : + +/* Just skip if no need to handle ARP cache */ +if (!local_ipaddr) +break ; + i40iw_manage_arp_cache(iwdev, netdev->dev_addr, &local_ipaddr,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 16/93 mmc: davinci: remove extraneous __init annotation
In reply to Greg Kroah-Hartman[ Upstream commit 9ce58dd7d9da3ca0d7cb8c9568f1c6f4746da65a ]
Building with clang finds a mistaken __init tag:
WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host() The function davinci_mmcsd_probe() references
the function __init init_mmcsd_host().
This is often because davinci_mmcsd_probe lacks a __init
annotation or the annotation of init_mmcsd_host is wrong.
--- drivers/mmc/host/davinci_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/host/davinci_mmc.c +1 -1
@@ -1117,7 +1117,7 @@ static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host *host) { }#endif -static void __init init_mmcsd_host (struct mmc_davinci_host *host) +static void init_mmcsd_host (struct mmc_davinci_host *host) {mmc_davinci_reset_ctrl (host,1 );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 17/93 ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
In reply to Greg Kroah-Hartman[ Upstream commit b4748e7ab731e436cf5db4786358ada5dd2db6dd ]
The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition.
This error predates the git history, so no idea when this error was introduced.
--- sound/drivers/opl3/opl3_voice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/drivers/opl3/opl3_voice.h +1 -1
@@ -41,7 +41,7 @@ void snd_opl3_timer_func(struct timer_list *t);/* Prototypes for opl3_drums.c */ void snd_opl3_load_drums (struct snd_opl3 *opl3); -void snd_opl3_drum_switch (struct snd_opl3 *opl3,int note,int on_off,int vel,struct snd_midi_channel *chan); +void snd_opl3_drum_switch (struct snd_opl3 *opl3,int note,int vel,int on_off,struct snd_midi_channel *chan);/* Prototypes for opl3_oss.c */ #if IS_ENABLED (CONFIG_SND_SEQUENCER_OSS )
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 18/93 paride/pf: cleanup queues when detection fails
In reply to Greg Kroah-Hartman[ Upstream commit 6ce59025f1182125e75c8d121daf44056b65dd1f ]
The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Also fix cleanup through regular module exit.
--- drivers/block/paride/pf.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/block/paride/pf.c +11 -5
@@ -761,8 +761,12 @@ static int pf_detect(void)return 0 ;printk ("%s: No ATAPI disk detected\n" , name); -for (pf = units, unit =0 ; unit <PF_UNITS ; pf++, unit++) +for (pf = units, unit =0 ; unit <PF_UNITS ; pf++, unit++) { +blk_cleanup_queue (pf->disk->queue); + pf->disk->queue =NULL ; +blk_mq_free_tag_set (&pf->tag_set);put_disk (pf->disk); + }pi_unregister_driver (par_drv);return -1 ; }
@@ -1047,13 +1051,15 @@ static void __exit pf_exit(void)int unit;unregister_blkdev (major, name);for (pf = units, unit =0 ; unit <PF_UNITS ; pf++, unit++) { -if (!pf->present) -continue ; -del_gendisk (pf->disk); +if (pf->present) +del_gendisk (pf->disk); +blk_cleanup_queue (pf->disk->queue);blk_mq_free_tag_set (&pf->tag_set);put_disk (pf->disk); -pi_release (pf->pi); + +if (pf->present) +pi_release (pf->pi); } }
Signature · 1 line
2.19.1
Re: [PATCH 5.0 18/93] paride/pf: cleanup queues when detection fails
Hi,
Quoted 8 lines
[ Upstream commit
6ce59025f1182125e75c8d121daf44056b65dd1f]The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Quoted 6 lines
Also fix cleanup through regular module exit.
Reported-by Randy Dunlap <[email protected]>Tested-by Randy Dunlap <[email protected]>Signed-off-by Jens Axboe <[email protected]>Signed-off-by Sasha Levin <[email protected]>
This commit causes a new problem. And the commit that made the fix is 58ccd2d31e502c37e108b285bf3d343eb00c235b.
I think this commit needs to be applied together.
Best regards,
Nobuhiro
________________________________________
差出人: [email protected] <[email protected]> が Greg Kroah-Hartman <[email protected]> の代理で送信 送信日時: 2019年4月19日 2:56
宛先: [email protected]
CC: Greg Kroah-Hartman; [email protected]; Randy Dunlap; Jens Axboe; Sasha Levin
件名: [PATCH 5.0 18/93] paride/pf: cleanup queues when detection fails
[ Upstream commit 6ce59025f1182125e75c8d121daf44056b65dd1f ]
The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Also fix cleanup through regular module exit.
--- drivers/block/paride/pf.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/block/paride/pf.c +11 -5
@@ -761,8 +761,12 @@ static int pf_detect(void)return 0 ;printk ("%s: No ATAPI disk detected\n" , name); -for (pf = units, unit =0 ; unit <PF_UNITS ; pf++, unit++) +for (pf = units, unit =0 ; unit <PF_UNITS ; pf++, unit++) { +blk_cleanup_queue (pf->disk->queue); + pf->disk->queue =NULL ; +blk_mq_free_tag_set (&pf->tag_set);put_disk (pf->disk); + }pi_unregister_driver (par_drv);return -1 ; }
@@ -1047,13 +1051,15 @@ static void __exit pf_exit(void)int unit;unregister_blkdev (major, name);for (pf = units, unit =0 ; unit <PF_UNITS ; pf++, unit++) { -if (!pf->present) -continue ; -del_gendisk (pf->disk); +if (pf->present) +del_gendisk (pf->disk); +blk_cleanup_queue (pf->disk->queue);blk_mq_free_tag_set (&pf->tag_set);put_disk (pf->disk); -pi_release (pf->pi); + +if (pf->present) +pi_release (pf->pi); } }
--
2.19.1
Re: [PATCH 5.0 18/93] paride/pf: cleanup queues when detection fails
Quoted 12 lines · On Fri, Apr 19, 2019 at 07:13:40AM +0000, [email protected]…
Hi,
Quoted 10 lines
[ Upstream commit
6ce59025f1182125e75c8d121daf44056b65dd1f]The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Quoted 8 lines
Quoted 4 lines
Reported-by Randy Dunlap <[email protected]>Tested-by Randy Dunlap <[email protected]>Signed-off-by Jens Axboe <[email protected]>Signed-off-by Sasha Levin <[email protected]>This commit causes a new problem. And the commit that made the fix is
58ccd2d31e502c37e108b285bf3d343eb00c235b.
I think this commit needs to be applied together.
I've queued up this fix, thank you!
--
Thanks,
Sasha
Greg Kroah-Hartman
maintainerPATCH 19/93 paride/pcd: cleanup queues when detection fails
In reply to Greg Kroah-Hartman[ Upstream commit 81b74ac68c28fddb3589ad5d4d5e587baf4bb781 ]
The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Also fix cleanup through regular module exit.
--- drivers/block/paride/pcd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/block/paride/pcd.c +5 -1
@@ -749,8 +749,12 @@ static int pcd_detect(void)return 0 ;printk ("%s: No CD-ROM drive found\n" , name); -for (unit =0 , cd = pcd; unit <PCD_UNITS ; unit++, cd++) +for (unit =0 , cd = pcd; unit <PCD_UNITS ; unit++, cd++) { +blk_cleanup_queue (cd->disk->queue); + cd->disk->queue =NULL ; +blk_mq_free_tag_set (&cd->tag_set);put_disk (cd->disk); + }pi_unregister_driver (par_drv);return -1 ; }
Signature · 1 line
2.19.1
Re: [PATCH 5.0 19/93] paride/pcd: cleanup queues when detection fails
Hi,
Quoted 8 lines
[ Upstream commit
81b74ac68c28fddb3589ad5d4d5e587baf4bb781]The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Quoted 6 lines
Also fix cleanup through regular module exit.
Reported-by Randy Dunlap <[email protected]>Tested-by Randy Dunlap <[email protected]>Signed-off-by Jens Axboe <[email protected]>Signed-off-by Sasha Levin <[email protected]>
This commit causes a new problem. And the commit that made the fix is f0d1762554014ce0ae347b9f0d088f2c157c8c72.
I think this commit needs to be applied together.
Best regards,
Nobuhiro
________________________________________
差出人: [email protected] <[email protected]> が Greg Kroah-Hartman <[email protected]> の代理で送信 送信日時: 2019年4月19日 2:56
宛先: [email protected]
CC: Greg Kroah-Hartman; [email protected]; Randy Dunlap; Jens Axboe; Sasha Levin
件名: [PATCH 5.0 19/93] paride/pcd: cleanup queues when detection fails
[ Upstream commit 81b74ac68c28fddb3589ad5d4d5e587baf4bb781 ]
The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Also fix cleanup through regular module exit.
--- drivers/block/paride/pcd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/block/paride/pcd.c +5 -1
@@ -749,8 +749,12 @@ static int pcd_detect(void)return 0 ;printk ("%s: No CD-ROM drive found\n" , name); -for (unit =0 , cd = pcd; unit <PCD_UNITS ; unit++, cd++) +for (unit =0 , cd = pcd; unit <PCD_UNITS ; unit++, cd++) { +blk_cleanup_queue (cd->disk->queue); + cd->disk->queue =NULL ; +blk_mq_free_tag_set (&cd->tag_set);put_disk (cd->disk); + }pi_unregister_driver (par_drv);return -1 ; }
--
2.19.1
Re: [PATCH 5.0 19/93] paride/pcd: cleanup queues when detection fails
Quoted 12 lines · On Fri, Apr 19, 2019 at 07:13:07AM +0000, [email protected]…
Hi,
Quoted 10 lines
[ Upstream commit
81b74ac68c28fddb3589ad5d4d5e587baf4bb781]The driver allocates queues for all the units it potentially supports. But if we fail to detect any drives, then we fail loading the module without cleaning up those queues. This is now evident with the switch to blk-mq, though the bug has been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Quoted 8 lines
Quoted 4 lines
Reported-by Randy Dunlap <[email protected]>Tested-by Randy Dunlap <[email protected]>Signed-off-by Jens Axboe <[email protected]>Signed-off-by Sasha Levin <[email protected]>This commit causes a new problem. And the commit that made the fix is
f0d1762554014ce0ae347b9f0d088f2c157c8c72.
I think this commit needs to be applied together.
Queued up this fix, thanks!
--
Thanks,
Sasha
Greg Kroah-Hartman
maintainerPATCH 20/93 thermal/intel_powerclamp: fix __percpu declaration of worker_data
In reply to Greg Kroah-Hartman[ Upstream commit aa36e3616532f82a920b5ebf4e059fbafae63d88 ]
This variable is declared as:
static struct powerclamp_worker_data * __percpu worker_data;
In other words, a percpu pointer to struct ...
But this variable not used like so but as a pointer to a percpu struct powerclamp_worker_data.
So fix the declaration as:
static struct powerclamp_worker_data __percpu *worker_data;
This also quiets Sparse's warnings from __verify_pcpu_ptr(), like:
494:49: warning: incorrect type in initializer (different address spaces)
494:49: expected void const [noderef] <asn:3> *__vpp_verify
494:49: got struct powerclamp_worker_data *
--- drivers/thermal/intel/intel_powerclamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/intel/intel_powerclamp.c +1 -1
@@ -101,7 +101,7 @@ struct powerclamp_worker_data {bool clamping; }; -static struct powerclamp_worker_data *__percpu worker_data; +static struct powerclamp_worker_data __percpu *worker_data;static struct thermal_cooling_device *cooling_dev;static unsigned long *cpu_clamping_mask;/* bit map for tracking per cpu * clamping kthread worker
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 21/93 thermal: samsung: Fix incorrect check after code merge
In reply to Greg Kroah-Hartman[ Upstream commit 3b5236cc5d086dd3ddd01113ee9255421aab9fab ]
Merge commit 19785cf93b6c ("Merge branch 'linus' ofgit://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce severity of too early temperature read"). Restore the original code from the mentioned commit to finally fix the warning message during boot:
thermal thermal_zone0: failed to read out thermal zone (-22)
--- drivers/thermal/samsung/exynos_tmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/samsung/exynos_tmu.c +1 -1
@@ -666,7 +666,7 @@ static int exynos_get_temp(void *p, int *temp)struct exynos_tmu_data *data = p;int value, ret =0 ; -if (!data || !data->tmu_read || !data->enabled) +if (!data || !data->tmu_read)return -EINVAL ;else if (!data->enabled)/*
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 22/93 thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
In reply to Greg Kroah-Hartman[ Upstream commit 35122495a8c6683e863acf7b05a7036b2be64c7a ]
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it.
--- drivers/thermal/broadcom/bcm2835_thermal.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/thermal/broadcom/bcm2835_thermal.c +4 -5
@@ -119,8 +119,7 @@ static const struct debugfs_reg32 bcm2835_thermal_regs[] = {static void bcm2835_thermal_debugfs (struct platform_device *pdev) { -struct thermal_zone_device *tz =platform_get_drvdata (pdev); -struct bcm2835_thermal_data *data = tz->devdata; +struct bcm2835_thermal_data *data =platform_get_drvdata (pdev);struct debugfs_regset32 *regset; data->debugfsdir =debugfs_create_dir ("bcm2835_thermal" ,NULL );
@@ -266,7 +265,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) data->tz = tz; -platform_set_drvdata (pdev, tz); +platform_set_drvdata (pdev, data);/* * Thermal_zone doesn't enable hwmon as default,
@@ -290,8 +289,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)static int bcm2835_thermal_remove (struct platform_device *pdev) { -struct thermal_zone_device *tz =platform_get_drvdata (pdev); -struct bcm2835_thermal_data *data = tz->devdata; +struct bcm2835_thermal_data *data =platform_get_drvdata (pdev); +struct thermal_zone_device *tz = data->tz;debugfs_remove_recursive (data->debugfsdir);thermal_zone_of_sensor_unregister (&pdev->dev, tz);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 23/93 thermal/int340x_thermal: Add additional UUIDs
In reply to Greg Kroah-Hartman[ Upstream commit 16fc8eca1975358111dbd7ce65e4ce42d1a848fb ]
Add more supported DPTF policies than the driver currently exposes.
--- .../intel/int340x_thermal/int3400_thermal.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/thermal/intel/int340x_thermal/int3400_thermal.c +14 -0
@@ -22,6 +22,13 @@ enum int3400_thermal_uuid {INT3400_THERMAL_PASSIVE_1 ,INT3400_THERMAL_ACTIVE ,INT3400_THERMAL_CRITICAL , +INT3400_THERMAL_ADAPTIVE_PERFORMANCE , +INT3400_THERMAL_EMERGENCY_CALL_MODE , +INT3400_THERMAL_PASSIVE_2 , +INT3400_THERMAL_POWER_BOSS , +INT3400_THERMAL_VIRTUAL_SENSOR , +INT3400_THERMAL_COOLING_MODE , +INT3400_THERMAL_HARDWARE_DUTY_CYCLING , INT3400_THERMAL_MAXIMUM_UUID, };
@@ -29,6 +36,13 @@ static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {"42A441D6-AE6A-462b-A84B-4A8CE79027D3" ,"3A95C389-E4B8-4629-A526-C52C88626BAE" ,"97C68AE7-15FA-499c-B8C9-5DA81D606E0A" , +"63BE270F-1C11-48FD-A6F7-3AF253FF3E2D" , +"5349962F-71E6-431D-9AE8-0A635B710AEE" , +"9E04115A-AE87-4D1C-9500-0F3E340BFE75" , +"F5A35014-C209-46A4-993A-EB56DE7530A1" , +"6ED722A7-9240-48A5-B479-31EEF723D7CF" , +"16CAF1B7-DD38-40ED-B1C1-1B8A1913D531" , + "BE84BABF-C4D4-403D-B495-3128FD44dAC1", }; struct int3400_thermal_priv {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 24/93 thermal/int340x_thermal: fix mode setting
In reply to Greg Kroah-Hartman[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ]
int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction.
--- drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/thermal/intel/int340x_thermal/int3400_thermal.c +3 -4
@@ -313,10 +313,9 @@ static int int3400_thermal_probe(struct platform_device *pdev)platform_set_drvdata (pdev, priv); -if (priv->uuid_bitmap &1 <<INT3400_THERMAL_PASSIVE_1 ) { - int3400_thermal_ops.get_mode = int3400_thermal_get_mode; - int3400_thermal_ops.set_mode = int3400_thermal_set_mode; - } + int3400_thermal_ops.get_mode = int3400_thermal_get_mode; + int3400_thermal_ops.set_mode = int3400_thermal_set_mode; + priv->thermal =thermal_zone_device_register ("INT3400 Thermal" ,0 ,0 , priv, &int3400_thermal_ops, &int3400_thermal_params,0 ,0 );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 25/93 thermal/intel_powerclamp: fix truncated kthread name
In reply to Greg Kroah-Hartman[ Upstream commit e925b5be5751f6a7286bbd9a4cbbc4ac90cc5fa6 ]
kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later.
--- drivers/thermal/intel/intel_powerclamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/thermal/intel/intel_powerclamp.c +1 -1
@@ -494,7 +494,7 @@ static void start_power_clamp_worker(unsigned long cpu)struct powerclamp_worker_data *w_data =per_cpu_ptr (worker_data, cpu);struct kthread_worker *worker; - worker =kthread_create_worker_on_cpu (cpu,0 ,"kidle_inject/%ld" , cpu); + worker =kthread_create_worker_on_cpu (cpu,0 ,"kidle_inj/%ld" , cpu);if (IS_ERR (worker))return ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 26/93 scsi: iscsi: flush running unbind operations when removing a session
In reply to Greg Kroah-Hartman[ Upstream commit 165aa2bfb42904b1bec4bf2fa257c8c603c14a06 ]
In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning.
[ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]---
--- drivers/scsi/scsi_transport_iscsi.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/scsi_transport_iscsi.c +2 -0
@@ -2200,6 +2200,8 @@ void iscsi_remove_session(struct iscsi_cls_session *session)scsi_target_unblock (&session->dev,SDEV_TRANSPORT_OFFLINE );/* flush running scans then delete devices */ flush_work (&session->scan_work); +/* flush running unbind operations */ +flush_work (&session->unbind_work);__iscsi_unbind_session (&session->unbind_work);/* hw iscsi may not have removed all connections from session */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 27/93 sched/cpufreq: Fix 32-bit math overflow
In reply to Greg Kroah-Hartman[ Upstream commit a23314e9d88d89d49e69db08f60b7caa470f04e1 ]
Vincent Wang reported that get_next_freq() has a mult overflow bug on 32-bit platforms in the IOWAIT boost case, since in that case {util,max} are in freq units instead of capacity units.
Solve this by moving the IOWAIT boost to capacity units. And since this means @max is constant; simplify the code.
--- kernel/sched/cpufreq_schedutil.c | 59 ++++++++++++++------------------ 1 file changed, 25 insertions(+), 34 deletions(-)
kernel/sched/cpufreq_schedutil.c +25 -34
@@ -48,10 +48,10 @@ struct sugov_cpu {bool iowait_boost_pending;unsigned int iowait_boost; -unsigned int iowait_boost_max;u64 last_update;unsigned long bw_dl; +unsigned long min;unsigned long max;/* The field below is for single-CPU policies only: */
@@ -303,8 +303,7 @@ static bool sugov_iowait_reset(struct sugov_cpu *sg_cpu, u64 time,if (delta_ns <=TICK_NSEC )return false; - sg_cpu->iowait_boost = set_iowait_boost - ? sg_cpu->sg_policy->policy->min :0 ; + sg_cpu->iowait_boost = set_iowait_boost ? sg_cpu->min :0 ; sg_cpu->iowait_boost_pending = set_iowait_boost;return true;
@@ -344,14 +343,13 @@ static void sugov_iowait_boost(struct sugov_cpu *sg_cpu, u64 time,/* Double the boost at each request */ if (sg_cpu->iowait_boost) { - sg_cpu->iowait_boost <<=1 ; -if (sg_cpu->iowait_boost > sg_cpu->iowait_boost_max) - sg_cpu->iowait_boost = sg_cpu->iowait_boost_max; + sg_cpu->iowait_boost = + min_t(unsigned int, sg_cpu->iowait_boost << 1, SCHED_CAPACITY_SCALE);return ; }/* First wakeup after IO: start with minimum boost */ - sg_cpu->iowait_boost = sg_cpu->sg_policy->policy->min; + sg_cpu->iowait_boost = sg_cpu->min; }/**
@@ -373,47 +371,38 @@ static void sugov_iowait_boost(struct sugov_cpu *sg_cpu, u64 time,* This mechanism is designed to boost high frequently IO waiting tasks, while * being more conservative on tasks which does sporadic IO operations. */ -static void sugov_iowait_apply (struct sugov_cpu *sg_cpu,u64 time, -unsigned long *util,unsigned long *max) +static unsigned long sugov_iowait_apply (struct sugov_cpu *sg_cpu,u64 time, +unsigned long util,unsigned long max) { -unsigned int boost_util, boost_max; +unsigned long boost;/* No boost currently required */ if (!sg_cpu->iowait_boost) -return ; +return util;/* Reset boost if the CPU appears to have been idle enough */ if (sugov_iowait_reset (sg_cpu, time, false)) -return ; +return util; -/* -* An IO waiting task has just woken up: -* allow to further double the boost value -*/ -if (sg_cpu->iowait_boost_pending) { - sg_cpu->iowait_boost_pending = false; - }else { +if (!sg_cpu->iowait_boost_pending) {/* -* Otherwise: reduce the boost value and disable it when we -* reach the minimum. +* No boost pending; reduce the boost value. */ sg_cpu->iowait_boost >>=1 ; -if (sg_cpu->iowait_boost < sg_cpu->sg_policy->policy->min) { +if (sg_cpu->iowait_boost < sg_cpu->min) { sg_cpu->iowait_boost =0 ; -return ; +return util; } } + sg_cpu->iowait_boost_pending = false; +/* -* Apply the current boost value: a CPU is boosted only if its current -* utilization is smaller then the current IO boost level. +* @util is already in capacity scale; convert iowait_boost +* into the same scale so we can compare. */ - boost_util = sg_cpu->iowait_boost; - boost_max = sg_cpu->iowait_boost_max; -if (*util * boost_max < *max * boost_util) { - *util = boost_util; - *max = boost_max; - } + boost = (sg_cpu->iowait_boost * max) >>SCHED_CAPACITY_SHIFT ; +return max (boost, util); }#ifdef CONFIG_NO_HZ_COMMON
@@ -460,7 +449,7 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, util =sugov_get_util (sg_cpu); max = sg_cpu->max; -sugov_iowait_apply (sg_cpu, time, &util, &max); + util =sugov_iowait_apply (sg_cpu, time, util, max); next_f =get_next_freq (sg_policy, util, max);/* * Do not reduce the frequency if the CPU has not been idle
@@ -500,7 +489,7 @@ static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, u64 time) j_util =sugov_get_util (j_sg_cpu); j_max = j_sg_cpu->max; -sugov_iowait_apply (j_sg_cpu, time, &j_util, &j_max); + j_util =sugov_iowait_apply (j_sg_cpu, time, j_util, j_max);if (j_util * max > j_max * util) { util = j_util;
@@ -837,7 +826,9 @@ static int sugov_start(struct cpufreq_policy *policy)memset (sg_cpu,0 ,sizeof (*sg_cpu)); sg_cpu->cpu = cpu; sg_cpu->sg_policy = sg_policy; - sg_cpu->iowait_boost_max = policy->cpuinfo.max_freq; + sg_cpu->min = + (SCHED_CAPACITY_SCALE * policy->cpuinfo.min_freq) / + policy->cpuinfo.max_freq; }for_each_cpu (cpu, policy->cpus) {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 28/93 sched/core: Fix buffer overflow in cgroup2 property cpu.max
In reply to Greg Kroah-Hartman[ Upstream commit 4c47acd824aaaa8fc6dc519fb4e08d1522105b7a ]
Add limit into sscanf format string for on-stack buffer.
--- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/sched/core.c +1 -1
@@ -6942,7 +6942,7 @@ static int __maybe_unused cpu_period_quota_parse(char *buf, {char tok[21 ];/* U64_MAX */ -if (!sscanf (buf,"%s %llu" , tok, periodp)) +if (sscanf (buf,"%20s %llu" , tok, periodp) <1 )return -EINVAL ; *periodp *=NSEC_PER_USEC ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 29/93 x86/mm: Dont leak kernel addresses
In reply to Greg Kroah-Hartman[ Upstream commit a3151724437f54076cc10bc02b1c4f0003ae36cd ]
Since commit:
ad67b74d2469d9b8 ("printk: hash addresses printed with %p")
at boot "____ptrval____" is printed instead of actual addresses:
found SMP MP-table at [mem 0x000f5cc0-0x000f5ccf] mapped at [(____ptrval____)]
Instead of changing the print to "%px", and leaking a kernel addresses, just remove the print completely, like in:
071929dbdd865f77 ("arm64: Stop printing the virtual memory layout").
--- arch/x86/kernel/mpparse.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/mpparse.c +2 -2
@@ -598,8 +598,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length) mpf_base = base; mpf_found = true; -pr_info ("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n" , - base, base +sizeof (*mpf) -1 , mpf); +pr_info ("found SMP MP-table at [mem %#010lx-%#010lx]\n" , + base, base +sizeof (*mpf) -1 );memblock_reserve (base,sizeof (*mpf));if (mpf->physptr)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 30/93 tools/power turbostat: return the exit status of a command
In reply to Greg Kroah-Hartman[ Upstream commit 2a95496634a017c19641f26f00907af75b962f01 ]
turbostat failed to return a non-zero exit status even though the supplied command (turbostat <command>) failed. Currently when turbostat forks a command it returns zero instead of the actual exit status of the command. Modify the code to return the exit status.
--- tools/power/x86/turbostat/turbostat.c | 3 +++ 1 file changed, 3 insertions(+)
tools/power/x86/turbostat/turbostat.c +3 -0
@@ -5077,6 +5077,9 @@ int fork_it(char **argv)signal (SIGQUIT ,SIG_IGN );if (waitpid (child_pid, &status,0 ) ==-1 )err (status,"waitpid" ); + +if (WIFEXITED (status)) + status =WEXITSTATUS (status); }/* * n.b. fork_it() does not check for errors from for_all_cpus()
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 31/93 scsi: core: Also call destroy_rcu_head() for passthrough requests
In reply to Greg Kroah-Hartman[ Upstream commit db983f6eef57a9d78af79bc32389b7e60eb3c47d ]
cmd->rcu is initialized by scsi_initialize_rq(). For passthrough requests, blk_get_request() calls scsi_initialize_rq(). For filesystem requests, scsi_init_command() calls scsi_initialize_rq(). Make sure that destroy_rcu_head() is called for passthrough requests.
--- drivers/scsi/scsi_lib.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/scsi/scsi_lib.c +8 -1
@@ -598,9 +598,16 @@ static bool scsi_end_request(struct request *req, blk_status_t error,if (!blk_rq_is_scsi (req)) {WARN_ON_ONCE (!(cmd->flags &SCMD_INITIALIZED )); cmd->flags &= ~SCMD_INITIALIZED ; -destroy_rcu_head (&cmd->rcu); } +/* +* Calling rcu_barrier() is not necessary here because the +* SCSI error handler guarantees that the function called by +* call_rcu() has been called before scsi_end_request() is +* called. +*/ +destroy_rcu_head (&cmd->rcu); +/* * In the MQ case the command gets freed by __blk_mq_end_request, * so we have to do all cleanup that depends on it earlier.
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 32/93 scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
In reply to Greg Kroah-Hartman[ Upstream commit ac444b4f0ace05d7c4c99f6b1e5b0cae0852f025 ]
This patch fixes crash due to NULL pointer derefrence because CPU pointer is not set and used by driver. Instead, driver is passes CPU as tag via ha->isp_ops->{lun_reset|target_reset}
[ 30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged... [ 69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46. [ 69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 70.000680] PGD 0 P4D 0 [ 70.003232] Oops: 0000 [#1] SMP PTI [ 70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1 [ 70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019 [ 70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10 [ 70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c [ 70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246 [ 70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000 [ 70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400 [ 70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa [ 70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528 [ 70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000 [ 70.088083] FS: 00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000 [ 70.096188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0 [ 70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 70.123425] Call Trace: [ 70.125896] __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx] [ 70.131572] scsi_ioctl_reset+0x1f5/0x2a0 [ 70.135600] scsi_ioctl+0x18e/0x397 [ 70.139099] ? sd_ioctl+0x7c/0x100 [sd_mod] [ 70.143287] blkdev_ioctl+0x32b/0x9f0 [ 70.146954] ? __check_object_size+0xa3/0x181 [ 70.151323] block_ioctl+0x39/0x40 [ 70.154735] do_vfs_ioctl+0xa4/0x630 [ 70.158322] ? syscall_trace_enter+0x1d3/0x2c0 [ 70.162769] ksys_ioctl+0x60/0x90 [ 70.166104] __x64_sys_ioctl+0x16/0x20 [ 70.169859] do_syscall_64+0x5b/0x1b0 [ 70.173532] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 70.178587] RIP: 0033:0x7f90a1b3445b [ 70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48 [ 70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b [ 70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003 [ 70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000 [ 70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84 [ 70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000 [ 70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli
nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_ vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm
[ 70.314805] usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_ intel [ 70.327335] CR2: 0000000000000040
--- drivers/scsi/qla2xxx/qla_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_os.c +1 -1
@@ -1459,7 +1459,7 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type, goto eh_reset_failed; } err =2 ; -if (do_reset (fcport, cmd->device->lun,blk_mq_rq_cpu (cmd->request) +1 ) +if (do_reset (fcport, cmd->device->lun,1 ) !=QLA_SUCCESS ) {ql_log (ql_log_warn, vha,0x800c ,"do_reset failed for cmd=%p.\n" , cmd);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 33/93 perf stat: Fix --no-scale
In reply to Greg Kroah-Hartman[ Upstream commit 75998bb263bf48c1c85d78cd2d2f3a97d3747cab ]
The -c option to enable multiplex scaling has been useless for quite some time because scaling is default.
It's only useful as --no-scale to disable scaling. But the non scaling code path has bitrotted and doesn't print anything because perf output code relies on value run/ena information.
Also even when we don't want to scale a value it's still useful to show its multiplex percentage.
This patch:
- Fixes help and documentation to show --no-scale instead of -c
- Removes -c, only keeps the long option because -c doesn't support negatives.
- Enables running/enabled even with --no-scale
- And fixes some other problems in the no-scale output.
Before:
$ perf stat --no-scale -e cycles true
Performance counter stats for 'true':
<not counted> cycles
0.000984154 seconds time elapsed
After:
$ ./perf stat --no-scale -e cycles true
Performance counter stats for 'true':
706,070 cycles
0.001219821 seconds time elapsedLPU-Reference: [email protected]
--- tools/perf/Documentation/perf-stat.txt | 5 ++--- tools/perf/builtin-stat.c | 3 ++- tools/perf/util/evsel.c | 3 +-- tools/perf/util/stat.c | 12 ++++-------- 4 files changed, 9 insertions(+), 14 deletions(-)
tools/perf/Documentation/perf-stat.txt +2 -3
@@ -72,9 +72,8 @@ report:: --all-cpus:: system-wide collection from all CPUs (default if no target is specified) --c:: ---scale:: - scale/normalize counter values +--no-scale:: + Don't scale/normalize counter values -d:: --detailed::
tools/perf/builtin-stat.c +2 -1
@@ -728,7 +728,8 @@ static struct option stat_options[] = { "system-wide collection from all CPUs"),OPT_BOOLEAN ('g' ,"group" , &group,"put the counters into a counter group" ), -OPT_BOOLEAN ('c' ,"scale" , &stat_config.scale,"scale/normalize counters" ), +OPT_BOOLEAN (0 ,"scale" , &stat_config.scale, +"Use --no-scale to disable counter scaling for multiplexing" ),OPT_INCR ('v' ,"verbose" , &verbose,"be more verbose (show counter open errors, etc)" ), OPT_INTEGER('r', "repeat", &stat_config.run_count,
tools/perf/util/evsel.c +1 -2
@@ -1341,8 +1341,7 @@ void perf_counts_values__scale(struct perf_counts_values *count, scaled =1 ; count->val = (u64)((double ) count->val * count->ena / count->run +0.5 ); } - }else - count->ena = count->run =0 ; + }if (pscaled) *pscaled = scaled;
tools/perf/util/stat.c +4 -8
@@ -291,10 +291,8 @@ process_counter_values(struct perf_stat_config *config, struct perf_evsel *evselbreak ;case AGGR_GLOBAL : aggr->val += count->val; -if (config->scale) { - aggr->ena += count->ena; - aggr->run += count->run; - } + aggr->ena += count->ena; + aggr->run += count->run;case AGGR_UNSET :default :break ;
@@ -442,10 +440,8 @@ int create_perf_stat_counter(struct perf_evsel *evsel,struct perf_event_attr *attr = &evsel->attr;struct perf_evsel *leader = evsel->leader; -if (config->scale) { - attr->read_format =PERF_FORMAT_TOTAL_TIME_ENABLED | -PERF_FORMAT_TOTAL_TIME_RUNNING ; - } + attr->read_format =PERF_FORMAT_TOTAL_TIME_ENABLED | +PERF_FORMAT_TOTAL_TIME_RUNNING ;/* * The event is part of non trivial group, let's enable
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 34/93 perf list: Dont forget to drop the reference to the allocated thread_map
In reply to Greg Kroah-Hartman[ Upstream commit 39df730b09774bd860e39ea208a48d15078236cb ]
Detected via gcc's ASan:
Direct leak of 2048 byte(s) in 64 object(s) allocated from:
6 #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370)
7 #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43
8 #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85
9 #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250
10 #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382
11 #5 0x556b0f0e3231 in print_events util/parse-events.c:2514
12 #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
13 #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
14 #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
15 #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
16 #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520
17 #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/util/parse-events.c | 1 + 1 file changed, 1 insertion(+)
tools/perf/util/parse-events.c +1 -0
@@ -2271,6 +2271,7 @@ static bool is_event_supported(u8 type, unsigned config)perf_evsel__delete (evsel); } +thread_map__put (tmap);return ret; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 35/93 perf tools: Fix errors under optimization level -Og
In reply to Greg Kroah-Hartman[ Upstream commit 11c1ea6f1a9bc97bf857fd12f72eacb6c69794e2 ]
Optimization level '-Og' offers a reasonable level of optimization while maintaining fast compilation and a good debugging experience. This patch tries to make it work.
$ make DEBUG=1 EXTRA_CFLAGS='-Og'
bench/epoll-ctl.c: In function ‘do_threads’:
bench/epoll-ctl.c:274:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret;
^~~
...--- tools/lib/bpf/libbpf.c | 2 +- tools/perf/bench/epoll-ctl.c | 2 +- tools/perf/bench/epoll-wait.c | 2 +- tools/perf/tests/backward-ring-buffer.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
tools/lib/bpf/libbpf.c +1 -1
@@ -627,7 +627,7 @@ bpf_object__init_maps(struct bpf_object *obj, int flags)bool strict = !(flags &MAPS_RELAX_COMPAT );int i, map_idx, map_def_sz, nr_maps =0 ;Elf_Scn *scn; -Elf_Data *data; +Elf_Data *data =NULL ;Elf_Data *symbols = obj->efile.symbols;if (obj->efile.maps_shndx <0 )
tools/perf/bench/epoll-ctl.c +1 -1
@@ -224,7 +224,7 @@ static int do_threads(struct worker *worker, struct cpu_map *cpu)pthread_attr_t thread_attr, *attrp =NULL ;cpu_set_t cpuset;unsigned int i, j; -int ret; +int ret =0 ;if (!noaffinity)pthread_attr_init (&thread_attr);
tools/perf/bench/epoll-wait.c +1 -1
@@ -293,7 +293,7 @@ static int do_threads(struct worker *worker, struct cpu_map *cpu)pthread_attr_t thread_attr, *attrp =NULL ;cpu_set_t cpuset;unsigned int i, j; -int ret, events =EPOLLIN ; +int ret =0 , events =EPOLLIN ;if (oneshot) events |=EPOLLONESHOT ;
tools/perf/tests/backward-ring-buffer.c +1 -1
@@ -18,7 +18,7 @@ static void testcase(void)int i;for (i =0 ; i <NR_ITERS ; i++) { -char proc_name[10 ]; +char proc_name[15 ];snprintf (proc_name,sizeof (proc_name),"p:%d\n" , i);prctl (PR_SET_NAME , proc_name);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 36/93 perf config: Fix an error in the config template documentation
In reply to Greg Kroah-Hartman[ Upstream commit 9b40dff7ba3caaf0d1919f98e136fa3400bd34aa ]
The option 'sort-order' should be 'sort_order'.
--- tools/perf/Documentation/perf-config.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/Documentation/perf-config.txt +1 -1
@@ -114,7 +114,7 @@ Given a $HOME/.perfconfig like this: [report] # Defaults - sort-order = comm,dso,symbol + sort_order = comm,dso,symbol percent-limit = 0 queue-size = 0 children = true
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 37/93 perf config: Fix a memory leak in collect_config()
In reply to Greg Kroah-Hartman[ Upstream commit 54569ba4b06d5baedae4614bde33a25a191473ba ]
Detected with gcc's ASan:
Direct leak of 66 byte(s) in 5 object(s) allocated from:
#0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
#1 0x560c8761034d in collect_config util/config.c:597
#2 0x560c8760d9cb in get_value util/config.c:169
#3 0x560c8760dfd7 in perf_parse_file util/config.c:285
#4 0x560c8760e0d2 in perf_config_from_file util/config.c:476
#5 0x560c876108fd in perf_config_set__init util/config.c:661
#6 0x560c87610c72 in perf_config_set__new util/config.c:709
#7 0x560c87610d2f in perf_config__init util/config.c:718
#8 0x560c87610e5d in perf_config util/config.c:730
#9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442
#10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/util/config.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
tools/perf/util/config.c +1 -2
@@ -632,11 +632,10 @@ static int collect_config(const char *var, const char *value, } ret =set_value (item, value); -return ret; out_free:free (key); -return -1 ; +return ret; } int perf_config_set__collect(struct perf_config_set *set, const char *file_name,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 38/93 perf build-id: Fix memory leak in print_sdt_events()
In reply to Greg Kroah-Hartman[ Upstream commit 8bde8516893da5a5fdf06121f74d11b52ab92df5 ]
Detected with gcc's ASan:
Direct leak of 4356 byte(s) in 120 object(s) allocated from:
#0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
#1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215
#2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339
#3 0x55719af66272 in print_events util/parse-events.c:2542
#4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
#5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520
#9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/util/build-id.c | 1 + tools/perf/util/parse-events.c | 1 + 2 files changed, 2 insertions(+)
tools/perf/util/build-id.c +1 -0
@@ -183,6 +183,7 @@ char *build_id_cache__linkname(const char *sbuild_id, char *bf, size_t size)return bf; } +/* The caller is responsible to free the returned buffer. */ char *build_id_cache__origname (const char *sbuild_id) {char *linkname;
tools/perf/util/parse-events.c +1 -0
@@ -2342,6 +2342,7 @@ void print_sdt_events(const char *subsys_glob, const char *event_glob,printf (" %-50s [%s]\n" , buf,"SDT event" );free (buf); } +free (path); }else printf (" %-50s [%s]\n" , nd->s,"SDT event" );if (nd2) {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 39/93 perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue
In reply to Greg Kroah-Hartman[ Upstream commit 0dba9e4be95b59e77060645ca8e37ca3231061f5 ]
The evlist should be destroyed before the perf session.
Detected with gcc's ASan:
=================================================================
==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190 WRITE of size 8 at 0x62b000002e38 thread T0
#0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89
#1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102
#2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145
#3 0x5611da2781cd in thread__put util/thread.c:130
#4 0x5611da2cc0a8 in __thread__zput util/thread.h:68
#5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148
#6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337
#7 0x5611da2ce19e in hists__delete_entries util/hist.c:365
#8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639
#9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651
#10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304
#11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309
#12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124
#13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148
#14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645
#15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
#19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
#20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9) 0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here:
#0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70)
#1 0x5611da260df4 in perf_session__delete util/session.c:201
#2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300
#3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
#4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
#8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)previously allocated by thread T0 here:
#0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5611da26010c in zalloc util/util.h:23
#2 0x5611da260824 in perf_session__new util/session.c:118
#3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192
#4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
#5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
#9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del Shadow bytes around the buggy address:
0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
=>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd
0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==27350==ABORTING
--- tools/perf/builtin-top.c | 42 ++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 23 deletions(-)
tools/perf/builtin-top.c +19 -23
@@ -1192,23 +1192,19 @@ static int __cmd_top(struct perf_top *top)pthread_t thread, thread_process;int ret; - top->session =perf_session__new (NULL , false,NULL ); -if (top->session ==NULL ) -return -1 ; -if (!top->annotation_opts.objdump_path) { ret =perf_env__lookup_objdump (&top->session->header.env, &top->annotation_opts.objdump_path);if (ret) - goto out_delete; +return ret; } ret =callchain_param__setup_sample_type (&callchain_param);if (ret) - goto out_delete; +return ret;if (perf_session__register_idle_thread (top->session) <0 ) - goto out_delete; +return ret;if (top->nr_threads_synthesize >1 )perf_set_multithreaded ();
@@ -1224,13 +1220,18 @@ static int __cmd_top(struct perf_top *top)if (perf_hpp_list.socket) { ret =perf_env__read_cpu_topology_map (&perf_env); -if (ret <0 ) - goto out_err_cpu_topo; +if (ret <0 ) { +char errbuf[BUFSIZ ]; +const char *err =str_error_r (-ret, errbuf,sizeof (errbuf)); + +ui__error ("Could not read the CPU topology map: %s\n" , err); +return ret; + } } ret =perf_top__start_counters (top);if (ret) - goto out_delete; +return ret; ret =perf_evlist__apply_drv_configs (evlist, &pos, &err_term);if (ret) {
@@ -1257,7 +1258,7 @@ static int __cmd_top(struct perf_top *top) ret =-1 ;if (pthread_create (&thread_process,NULL , process_thread, top)) {ui__error ("Could not create process thread.\n" ); - goto out_delete; +return ret; } if (pthread_create(&thread, NULL, (use_browser > 0 ? display_thread_tui :
@@ -1301,19 +1302,7 @@ static int __cmd_top(struct perf_top *top) out_join_thread:pthread_cond_signal (&top->qe.cond);pthread_join (thread_process,NULL ); -out_delete: -perf_session__delete (top->session); - top->session =NULL ; -return ret; - -out_err_cpu_topo: { -char errbuf[BUFSIZ ]; -const char *err =str_error_r (-ret, errbuf,sizeof (errbuf)); - -ui__error ("Could not read the CPU topology map: %s\n" , err); - goto out_delete; -} } static int
@@ -1644,10 +1633,17 @@ int cmd_top(int argc, const char **argv)signal (SIGWINCH , winch_sig); } + top.session =perf_session__new (NULL , false,NULL ); +if (top.session ==NULL ) { + status =-1 ; + goto out_delete_evlist; + } + status =__cmd_top (&top); out_delete_evlist:perf_evlist__delete (top.evlist); +perf_session__delete (top.session);return status; }
Signature · 1 line
2.19.1
Re: [PATCH 5.0 39/93] perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue
Quoted 80 lines · Greg Kroah-Hartman
[ Upstream commit
0dba9e4be95b59e77060645ca8e37ca3231061f5]The evlist should be destroyed before the perf session.
Detected with gcc's ASan:
=================================================================
==27350==ERROR: AddressSanitizer: heap-use-after-free on address0x62b000002e38at pc0x5611da276999bp0x7ffce8f1d1a0sp0x7ffce8f1d190WRITE of size 8 at0x62b000002e38thread T0#0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9)
0x62b000002e38is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here:#0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)previously allocated by thread T0 here:
#0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)SUMMARY: AddressSanitizer: heap-use-after-free
/home/work/linux/tools/include/linux/list.h:89in__list_delShadow bytes around the buggy address:0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fdShadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Quoted 8 lines
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==27350==ABORTING
I'm seeing the following build error as a result of this patch being backported to 5.0:
builtin-top.c: In function ‘__cmd_top’:
builtin-top.c:1241:3: error: label ‘out_delete’ used but not defined
goto out_delete;
^~~~
CC builtin-script.o
Dropping this patch from 5.0 (along with ad59b96f965a ("perf data: Don't store auxtrace index for directory data file") does fix the perf build.
Dan
Quoted 120 lines
Signed-off-by Changbin Du <[email protected]>Reviewed-by Jiri Olsa <[email protected]>Cc Alexei Starovoitov <[email protected]>Cc Daniel Borkmann <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Steven Rostedt (VMware) <[email protected]>Signed-off-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- tools/perf/builtin-top.c | 42 ++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 23 deletions(-)tools/perf/builtin-top.c +19
-23@@ -1192,23 +1192,19 @@ static int __cmd_top(struct perf_top *top)pthread_t thread, thread_process;int ret; - top->session =perf_session__new (NULL , false,NULL ); -if (top->session ==NULL ) -return -1 ; -if (!top->annotation_opts.objdump_path) { ret =perf_env__lookup_objdump (&top->session->header.env, &top->annotation_opts.objdump_path);if (ret) - goto out_delete; +return ret; } ret =callchain_param__setup_sample_type (&callchain_param);if (ret) - goto out_delete; +return ret;if (perf_session__register_idle_thread (top->session) <0 ) - goto out_delete; +return ret;if (top->nr_threads_synthesize >1 )perf_set_multithreaded ();@@ -1224,13 +1220,18 @@ static int __cmd_top(struct perf_top *top)if (perf_hpp_list.socket) { ret =perf_env__read_cpu_topology_map (&perf_env); -if (ret <0 ) - goto out_err_cpu_topo; +if (ret <0 ) { +char errbuf[BUFSIZ ]; +const char *err =str_error_r (-ret, errbuf,sizeof (errbuf)); + +ui__error ("Could not read the CPU topology map: %s\n" , err); +return ret; + } } ret =perf_top__start_counters (top);if (ret) - goto out_delete; +return ret; ret =perf_evlist__apply_drv_configs (evlist, &pos, &err_term);if (ret) {@@ -1257,7 +1258,7 @@ static int __cmd_top(struct perf_top *top) ret =-1 ;if (pthread_create (&thread_process,NULL , process_thread, top)) {ui__error ("Could not create process thread.\n" ); - goto out_delete; +return ret; } if (pthread_create(&thread, NULL, (use_browser > 0 ? display_thread_tui :@@ -1301,19 +1302,7 @@ static int __cmd_top(struct perf_top *top) out_join_thread:pthread_cond_signal (&top->qe.cond);pthread_join (thread_process,NULL ); -out_delete: -perf_session__delete (top->session); - top->session =NULL ; -return ret; - -out_err_cpu_topo: { -char errbuf[BUFSIZ ]; -const char *err =str_error_r (-ret, errbuf,sizeof (errbuf)); - -ui__error ("Could not read the CPU topology map: %s\n" , err); - goto out_delete; -} } static int@@ -1644,10 +1633,17 @@ int cmd_top(int argc, const char **argv)signal (SIGWINCH , winch_sig); } + top.session =perf_session__new (NULL , false,NULL ); +if (top.session ==NULL ) { + status =-1 ; + goto out_delete_evlist; + } + status =__cmd_top (&top); out_delete_evlist:perf_evlist__delete (top.evlist); +perf_session__delete (top.session);return status; }Signature · 1 line
2.19.1
Signature · 1 line
Linaro - Kernel Validation
Sasha Levin
maintainerRe: [PATCH 5.0 39/93] perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue
Quoted 93 lines · Dan Rue
Quoted 80 lines · Greg Kroah-Hartman
[ Upstream commit
0dba9e4be95b59e77060645ca8e37ca3231061f5]The evlist should be destroyed before the perf session.
Detected with gcc's ASan:
=================================================================
==27350==ERROR: AddressSanitizer: heap-use-after-free on address0x62b000002e38at pc0x5611da276999bp0x7ffce8f1d1a0sp0x7ffce8f1d190WRITE of size 8 at0x62b000002e38thread T0#0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9)
0x62b000002e38is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here:#0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)previously allocated by thread T0 here:
#0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)SUMMARY: AddressSanitizer: heap-use-after-free
/home/work/linux/tools/include/linux/list.h:89in__list_delShadow bytes around the buggy address:0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fdShadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6Quoted 8 lines
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==27350==ABORTINGI'm seeing the following build error as a result of this patch being backported to 5.0:
Quoted 8 lines
builtin-top.c: In function ‘__cmd_top’:builtin-top.c:1241:3: error: label ‘out_delete’ used but not defined goto out_delete; ^~~~ CC builtin-script.oDropping this patch from 5.0 (along with
ad59b96f965a("perf data: Don't store auxtrace index for directory data file") does fix the perf build.
Now dropped, thanks again!
--
Thanks,
Sasha
Re: [PATCH 5.0 39/93] perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue
In reply to Greg Kroah-HartmanDen 18-04-2019 kl. 20:57, skrev Greg Kroah-Hartman:
Quoted 194 lines
[ Upstream commit
0dba9e4be95b59e77060645ca8e37ca3231061f5]The evlist should be destroyed before the perf session.
Detected with gcc's ASan:
================================================================= ==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190 WRITE of size 8 at 0x62b000002e38 thread T0 #0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9) 0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here: #0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) previously allocated by thread T0 here: #0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del Shadow bytes around the buggy address: 0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==27350==ABORTINGSigned-off-by Changbin Du <[email protected]>Reviewed-by Jiri Olsa <[email protected]>Cc Alexei Starovoitov <[email protected]>Cc Daniel Borkmann <[email protected]>Cc Namhyung Kim <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Steven Rostedt (VMware) <[email protected]>Signed-off-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- tools/perf/builtin-top.c | 42 ++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 23 deletions(-)tools/perf/builtin-top.c +16
-23@@ -1192,23 +1192,19 @@ static int __cmd_top(struct perf_top *top)pthread_t thread, thread_process;int ret; - top->session =perf_session__new (NULL , false,NULL ); -if (top->session ==NULL ) -return -1 ; -if (!top->annotation_opts.objdump_path) { ret =perf_env__lookup_objdump (&top->session->header.env, &top->annotation_opts.objdump_path);if (ret) - goto out_delete; +return ret; } ret =callchain_param__setup_sample_type (&callchain_param);if (ret) - goto out_delete; +return ret;if (perf_session__register_idle_thread (top->session) <0 ) - goto out_delete; +return ret;if (top->nr_threads_synthesize >1 )perf_set_multithreaded ();@@ -1224,13 +1220,18 @@ static int __cmd_top(struct perf_top *top)if (perf_hpp_list.socket) { ret =perf_env__read_cpu_topology_map (&perf_env); -if (ret <0 ) - goto out_err_cpu_topo; +if (ret <0 ) { +char errbuf[BUFSIZ ]; +const char *err =str_error_r (-ret, errbuf,sizeof (errbuf)); + +ui__error ("Could not read the CPU topology map: %s\n" , err); +return ret; + } } ret =perf_top__start_counters (top);if (ret) - goto out_delete; +return ret; ret =perf_evlist__apply_drv_configs (evlist, &pos, &err_term);if (ret) {@@ -1257,7 +1258,7 @@ static int __cmd_top(struct perf_top *top) ret =-1 ;if (pthread_create (&thread_process,NULL , process_thread, top)) {ui__error ("Could not create process thread.\n" ); - goto out_delete; +return ret; } if (pthread_create(&thread, NULL, (use_browser > 0 ? display_thread_tui :@@ -1301,19 +1302,7 @@ static int __cmd_top(struct perf_top *top) out_join_thread:pthread_cond_signal (&top->qe.cond);pthread_join (thread_process,NULL ); -out_delete: -perf_session__delete (top->session); - top->session =NULL ; -return ret; - -out_err_cpu_topo: { -char errbuf[BUFSIZ ]; -const char *err =str_error_r (-ret, errbuf,sizeof (errbuf)); - -ui__error ("Could not read the CPU topology map: %s\n" , err); - goto out_delete; -} } static int@@ -1644,10 +1633,17 @@ int cmd_top(int argc, const char **argv)signal (SIGWINCH , winch_sig); } + top.session =perf_session__new (NULL , false,NULL ); +if (top.session ==NULL ) { + status =-1 ; + goto out_delete_evlist;
tools/perf/builtin-top.c int cmd_top(int argc, const char **argv) · line 1649
Quoted 10 lines
tools/perf/builtin-top.c +3
-0+ } + status =__cmd_top (&top); out_delete_evlist:perf_evlist__delete (top.evlist); +perf_session__delete (top.session);return status; }
This one breaks perf build like this:
builtin-top.c: In function '__cmd_top':
builtin-top.c:1241:3: error: label 'out_delete' used but not defined
goto out_delete;
Suggested 5.0 specific fix attached.
Subject: perf top: fix builtin-top build breakage.
In 5.0 -stable queue, backported upstream commit 0dba9e4be95b (perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue)
causes the perf build to break with:
builtin-top.c: In function '__cmd_top':
builtin-top.c:1241:3: error: label 'out_delete' used but not defined
goto out_delete;
^~~~
This does not happend in upstream linus tree as the affected code is removed in commit 159b0da50adb (perf pmu: Remove set_drv_config API) that I assume is not ok to backport in -stable trees.
Fix it up like other code in commit 0dba9e4be95b.
tools/perf/builtin-top.c +1 -1
@@ -1238,7 +1238,7 @@ static int __cmd_top(struct perf_top *topr_err ("failed to set config \"%s\" on event %s with %d (%s)\n" , err_term->val.drv_cfg,perf_evsel__name (pos), errno,str_error_r (errno, msg,sizeof (msg))); - goto out_delete; +return ret; } top->session->evlist = top->evlist;
Greg Kroah-Hartman
maintainerPATCH 40/93 perf top: Fix error handling in cmd_top()
In reply to Greg Kroah-Hartman[ Upstream commit 70c819e4bf1c5f492768b399d898d458ccdad2b6 ]
We should go to the cleanup path, to avoid leaks, detected using gcc's ASan.
--- tools/perf/builtin-top.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
tools/perf/builtin-top.c +3 -2
@@ -1622,8 +1622,9 @@ int cmd_top(int argc, const char **argv)annotation_config__init (); symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name ==NULL ); -if (symbol__init (NULL ) <0 ) -return -1 ; + status =symbol__init (NULL ); +if (status <0 ) + goto out_delete_evlist;sort__setup_elide (stdout);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 41/93 perf hist: Add missing map__put() in error case
In reply to Greg Kroah-Hartman[ Upstream commit cb6186aeffda4d27e56066c79e9579e7831541d3 ]
We need to map__put() before returning from failure of sample__resolve_callchain().
Detected with gcc's ASan.
--- tools/perf/util/hist.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/util/hist.c +3 -1
@@ -1048,8 +1048,10 @@ int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, err =sample__resolve_callchain (iter->sample, &callchain_cursor, &iter->parent, iter->evsel, al, max_stack_depth); -if (err) +if (err) { +map__put (alm);return err; + } err = iter->ops->prepare_entry (iter, al);if (err)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 42/93 perf map: Remove map from names tree in __maps__remove()
In reply to Greg Kroah-Hartman[ Upstream commit b49265e04410b97b31a5ee66ef6782c1b2d6cd2c ]
There are two trees for each map inserted by maps__insert(), so remove it from the 'names' tree in __maps__remove().
Detected with gcc's ASan.
--- tools/perf/util/map.c | 3 +++ 1 file changed, 3 insertions(+)
tools/perf/util/map.c +3 -0
@@ -911,6 +911,9 @@ static void __maps__remove(struct maps *maps, struct map *map) {rb_erase_init (&map->rb_node, &maps->entries);map__put (map); + +rb_erase_init (&map->rb_node_name, &maps->names); +map__put (map); }void maps__remove (struct maps *maps,struct map *map)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 43/93 perf maps: Purge all maps from the names tree
In reply to Greg Kroah-Hartman[ Upstream commit da3a53a7390a89391bd63bead0c2e9af4c5ef3d6 ]
Add function __maps__purge_names() to purge all maps from the names tree. We need to cleanup the names tree in maps__exit().
Detected with gcc's ASan.
--- tools/perf/util/map.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
tools/perf/util/map.c +15 -0
@@ -571,10 +571,25 @@ static void __maps__purge(struct maps *maps) } } +static void __maps__purge_names (struct maps *maps) +{ +struct rb_root *root = &maps->names; +struct rb_node *next =rb_first (root); + +while (next) { + struct map *pos = rb_entry(next, struct map, rb_node_name); + + next =rb_next (&pos->rb_node_name); +rb_erase_init (&pos->rb_node_name, root); +map__put (pos); + } +} +static void maps__exit (struct maps *maps) {down_write (&maps->lock);__maps__purge (maps); +__maps__purge_names (maps);up_write (&maps->lock); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 44/93 perf top: Fix global-buffer-overflow issue
In reply to Greg Kroah-Hartman[ Upstream commit 1e5b0cf8672e622257df024074e6e09bfbcb7750 ]
The array str[] should have six elements.
=================================================================
==4322==ERROR: AddressSanitizer: global-buffer-overflow on address 0x56463844e300 at pc 0x564637e7ad0d bp 0x7f30c8c89d10 sp 0x7f30c8c89d00 READ of size 8 at 0x56463844e300 thread T9
#0 0x564637e7ad0c in __ordered_events__flush util/ordered-events.c:316
#1 0x564637e7b0e4 in ordered_events__flush util/ordered-events.c:338
#2 0x564637c6a57d in process_thread /home/changbin/work/linux/tools/perf/builtin-top.c:1073
#3 0x7f30d173a163 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x8163)
#4 0x7f30cfffbdee in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x11adee) 0x56463844e300 is located 32 bytes to the left of global variable 'flags' defined in 'util/trace-event-parse.c:229:26' (0x56463844e320) of size 192 0x56463844e300 is located 0 bytes to the right of global variable 'str' defined in 'util/ordered-events.c:268:28' (0x56463844e2e0) of size 32
SUMMARY: AddressSanitizer: global-buffer-overflow util/ordered-events.c:316 in __ordered_events__flush
Shadow bytes around the buggy address:
0x0ac947081c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081c50: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00
=>0x0ac947081c60:[f9]f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081c70: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
0x0ac947081c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ac947081cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Thread T9 created by T0 here:
#0 0x7f30d179de5f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x4ae5f)
#1 0x564637c6b954 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1253
#2 0x564637c7173c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
#3 0x564637d85038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#4 0x564637d85577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#5 0x564637d8597b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#6 0x564637d860e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
#7 0x7f30cff0509a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/util/ordered-events.c | 2 ++ 1 file changed, 2 insertions(+)
tools/perf/util/ordered-events.c +2 -0
@@ -270,6 +270,8 @@ static int __ordered_events__flush(struct ordered_events *oe, enum oe_flush how,"FINAL" ,"ROUND" ,"HALF " , +"TOP " , + "TIME ", };int err;bool show_progress = false;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 45/93 perf evsel: Free evsel->counts in perf_evsel__exit()
In reply to Greg Kroah-Hartman[ Upstream commit 42dfa451d825a2ad15793c476f73e7bbc0f9d312 ]
Using gcc's ASan, Changbin reports:
=================================================================
==7494==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5625e5330a5e in zalloc util/util.h:23
#2 0x5625e5330a9b in perf_counts__new util/counts.c:10
#3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
#4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
#5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
#6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
#7 0x5625e51528e6 in run_test tests/builtin-test.c:358
#8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#10 0x5625e515572f in cmd_test tests/builtin-test.c:722
#11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)Indirect leak of 72 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x5625e532560d in zalloc util/util.h:23
#2 0x5625e532566b in xyarray__new util/xyarray.c:10
#3 0x5625e5330aba in perf_counts__new util/counts.c:15
#4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
#5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
#6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
#7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
#8 0x5625e51528e6 in run_test tests/builtin-test.c:358
#9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#11 0x5625e515572f in cmd_test tests/builtin-test.c:722
#12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead.
--- tools/perf/util/evsel.c | 1 + 1 file changed, 1 insertion(+)
tools/perf/util/evsel.c +1 -0
@@ -1289,6 +1289,7 @@ void perf_evsel__exit(struct perf_evsel *evsel) {assert (list_empty (&evsel->node));assert (evsel->evlist ==NULL ); +perf_evsel__free_counts (evsel);perf_evsel__free_fd (evsel);perf_evsel__free_id (evsel);perf_evsel__free_config_terms (evsel);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 46/93 perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test
In reply to Greg Kroah-Hartman[ Upstream commit 93faa52e8371f0291ee1ff4994edae2b336b6233 ]
=================================================================
==7497==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
#2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
#3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
#4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
#5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
#6 0x5625e51528e6 in run_test tests/builtin-test.c:358
#7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#9 0x5625e515572f in cmd_test tests/builtin-test.c:722
#10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/tests/openat-syscall-all-cpus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/tests/openat-syscall-all-cpus.c +3 -1
@@ -45,7 +45,7 @@ int test__openat_syscall_event_on_all_cpus(struct test *test __maybe_unused, intif (IS_ERR (evsel)) {tracing_path__strerror_open_tp (errno, errbuf,sizeof (errbuf),"syscalls" ,"sys_enter_openat" );pr_debug ("%s\n" , errbuf); - goto out_thread_map_delete; + goto out_cpu_map_delete; }if (perf_evsel__open (evsel, cpus, threads) <0 ) {
@@ -119,6 +119,8 @@ int test__openat_syscall_event_on_all_cpus(struct test *test __maybe_unused, intperf_evsel__close_fd (evsel); out_evsel_delete:perf_evsel__delete (evsel); +out_cpu_map_delete: +cpu_map__put (cpus); out_thread_map_delete:thread_map__put (threads);return err;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 47/93 perf tests: Fix memory leak by expr__find_other() in test__expr()
In reply to Greg Kroah-Hartman[ Upstream commit f97a8991d3b998e518f56794d879f645964de649 ]
=================================================================
==7506==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 13 byte(s) in 3 object(s) allocated from:
#0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
#1 0x5625e53aaef0 in expr__find_other util/expr.y:221
#2 0x5625e51bcd3f in test__expr tests/expr.c:52
#3 0x5625e51528e6 in run_test tests/builtin-test.c:358
#4 0x5625e5152baf in test_and_print tests/builtin-test.c:388
#5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
#6 0x5625e515572f in cmd_test tests/builtin-test.c:722
#7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
#11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)--- tools/perf/tests/expr.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
tools/perf/tests/expr.c +4 -1
@@ -19,7 +19,7 @@ int test__expr(struct test *t __maybe_unused, int subtest __maybe_unused)const char *p;const char **other;double val; -int ret; +int i, ret;struct parse_ctx ctx;int num_other;
@@ -56,6 +56,9 @@ int test__expr(struct test *t __maybe_unused, int subtest __maybe_unused)TEST_ASSERT_VAL ("find other" , !strcmp (other[1 ],"BAZ" ));TEST_ASSERT_VAL ("find other" , !strcmp (other[2 ],"BOZO" ));TEST_ASSERT_VAL ("find other" , other[3 ] ==NULL ); + +for (i =0 ; i < num_other; i++) +free ((void *)other[i]);free ((void *)other);return 0 ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 48/93 perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
In reply to Greg Kroah-Hartman[ Upstream commit d982b33133284fa7efa0e52ae06b88f9be3ea764 ]
=================================================================
==20875==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1160 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x55bd50005599 in zalloc util/util.h:23
#2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
#3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
#4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)Indirect leak of 19 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)--- tools/perf/tests/evsel-tp-sched.c | 1 + 1 file changed, 1 insertion(+)
tools/perf/tests/evsel-tp-sched.c +1 -0
@@ -85,5 +85,6 @@ int test__perf_evsel__tp_sched_test(struct test *test __maybe_unused, int subtesif (perf_evsel__test_field (evsel,"target_cpu" ,4 , true)) ret =-1 ; +perf_evsel__delete (evsel);return ret; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 49/93 ACPI / utils: Drop reference in test for device presence
In reply to Greg Kroah-Hartman[ Upstream commit 54e3aca84e571559915998aa6cc05e5ac37c043b ]
When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference.
Drop the reference on the device in acpi_dev_present().
--- drivers/acpi/utils.c | 1 + 1 file changed, 1 insertion(+)
drivers/acpi/utils.c +1 -0
@@ -800,6 +800,7 @@ bool acpi_dev_present(const char *hid, const char *uid, s64 hrv) match.hrv = hrv; dev =bus_find_device (&acpi_bus_type,NULL , &match, acpi_dev_match_cb); +put_device (dev);return !!dev; }EXPORT_SYMBOL (acpi_dev_present);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 50/93 PM / Domains: Avoid a potential deadlock
In reply to Greg Kroah-Hartman[ Upstream commit 2071ac985d37efe496782c34318dbead93beb02f ]
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following:
First thread is probing cs2000cs2000_probe()
clk_register()
__clk_core_init()
clk_prepare_lock() ----> acquires prepare_lock
cs2000_recalc_rate()
i2c_smbus_read_byte_data()
rcar_i2c_master_xfer()
dma_request_chan()
rcar_dmac_of_xlate()
rcar_dmac_alloc_chan_resources()
pm_runtime_get_sync()
__pm_runtime_resume()
rpm_resume()
rpm_callback()
genpd_runtime_resume() ----> acquires genpd->mlockSecond thread is attaching any device to the same PM domain genpd_add_device()
genpd_lock() ----> acquires genpd->mlock
cpg_mssr_attach_dev()
of_clk_get_from_provider()
__of_clk_get_from_provider()
__clk_create_clk()
clk_prepare_lock() ----> acquires prepare_lockSince currently no PM provider access genpd's critical section
in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock.
This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev
--- drivers/base/power/domain.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/base/power/domain.c +6 -7
@@ -1467,12 +1467,12 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,if (IS_ERR (gpd_data))return PTR_ERR (gpd_data); -genpd_lock (genpd); - ret = genpd->attach_dev ? genpd->attach_dev (genpd, dev) :0 ;if (ret) goto out; +genpd_lock (genpd); +dev_pm_domain_set (dev, &genpd->domain); genpd->device_count++;
@@ -1480,9 +1480,8 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,list_add_tail (&gpd_data->base.list_node, &genpd->dev_list); - out:genpd_unlock (genpd); - + out:if (ret)genpd_free_dev_data (dev, gpd_data);else
@@ -1531,15 +1530,15 @@ static int genpd_remove_device(struct generic_pm_domain *genpd, genpd->device_count--; genpd->max_off_time_changed = true; -if (genpd->detach_dev) - genpd->detach_dev (genpd, dev); -dev_pm_domain_set (dev,NULL );list_del_init (&pdd->list_node);genpd_unlock (genpd); +if (genpd->detach_dev) + genpd->detach_dev (genpd, dev); +genpd_free_dev_data (dev, gpd_data);return 0 ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 51/93 blk-iolatency: #include "blk.h"
In reply to Greg Kroah-Hartman[ Upstream commit 373e915cd8e84544609eced57a44fbc084f8d60f ]
This patch avoids that the following warning is reported when building with W=1:
block/blk-iolatency.c:734:5: warning: no previous prototype for 'blk_iolatency_init' [-Wmissing-prototypes]
--- block/blk-iolatency.c | 1 + 1 file changed, 1 insertion(+)
block/blk-iolatency.c +1 -0
@@ -75,6 +75,7 @@#include <linux/blk-mq.h> #include "blk-rq-qos.h" #include "blk-stat.h" +#include "blk.h" #define DEFAULT_SCALE_COOKIE 1000000U
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 52/93 drm/exynos/mixer: fix MIXER shadow registry synchronisation code
In reply to Greg Kroah-Hartman[ Upstream commit 6a3b45ada960ac475ec2b4103d43e57943b2b8d3 ]
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers).
Apparently the driver implements it incorrectly. The rule should be as follows:
- do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0.
- before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset,
- after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly.
Below sample kernel log from page fault caused by the bug:
[ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64
v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync
--- drivers/gpu/drm/exynos/exynos_mixer.c | 110 +++++++++++++++----------- 1 file changed, 66 insertions(+), 44 deletions(-)
drivers/gpu/drm/exynos/exynos_mixer.c +66 -44
@@ -20,6 +20,7 @@#include "regs-vp.h" #include <linux/kernel.h> +#include <linux/ktime.h> #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/i2c.h>
@@ -352,15 +353,62 @@ static void mixer_cfg_vp_blend(struct mixer_context *ctx, unsigned int alpha)mixer_reg_write (ctx,MXR_VIDEO_CFG , val); } -static void mixer_vsync_set_update (struct mixer_context *ctx,bool enable) +static bool mixer_is_synced (struct mixer_context *ctx) { -/* block update on vsync */ -mixer_reg_writemask (ctx,MXR_STATUS , enable ? -MXR_STATUS_SYNC_ENABLE :0 ,MXR_STATUS_SYNC_ENABLE ); +u32 base, shadow; +if (ctx->mxr_ver ==MXR_VER_16_0_33_0 || + ctx->mxr_ver ==MXR_VER_128_0_0_184 ) +return !(mixer_reg_read (ctx,MXR_CFG ) & +MXR_CFG_LAYER_UPDATE_COUNT_MASK ); + +if (test_bit (MXR_BIT_VP_ENABLED , &ctx->flags) && +vp_reg_read (ctx,VP_SHADOW_UPDATE )) +return false; + + base =mixer_reg_read (ctx,MXR_CFG ); + shadow =mixer_reg_read (ctx,MXR_CFG_S ); +if (base != shadow) +return false; + + base =mixer_reg_read (ctx,MXR_GRAPHIC_BASE (0 )); + shadow =mixer_reg_read (ctx,MXR_GRAPHIC_BASE_S (0 )); +if (base != shadow) +return false; + + base =mixer_reg_read (ctx,MXR_GRAPHIC_BASE (1 )); + shadow =mixer_reg_read (ctx,MXR_GRAPHIC_BASE_S (1 )); +if (base != shadow) +return false; + +return true; +} + +static int mixer_wait_for_sync (struct mixer_context *ctx) +{ +ktime_t timeout =ktime_add_us (ktime_get (),100000 ); + +while (!mixer_is_synced (ctx)) { +usleep_range (1000 ,2000 ); +if (ktime_compare (ktime_get (), timeout) >0 ) +return -ETIMEDOUT ; + } +return 0 ; +} + +static void mixer_disable_sync (struct mixer_context *ctx) +{ +mixer_reg_writemask (ctx,MXR_STATUS ,0 ,MXR_STATUS_SYNC_ENABLE ); +} + +static void mixer_enable_sync (struct mixer_context *ctx) +{ +if (ctx->mxr_ver ==MXR_VER_16_0_33_0 || + ctx->mxr_ver ==MXR_VER_128_0_0_184 ) +mixer_reg_writemask (ctx,MXR_CFG , ~0 ,MXR_CFG_LAYER_UPDATE ); +mixer_reg_writemask (ctx,MXR_STATUS , ~0 ,MXR_STATUS_SYNC_ENABLE );if (test_bit (MXR_BIT_VP_ENABLED , &ctx->flags)) -vp_reg_write (ctx,VP_SHADOW_UPDATE , enable ? -VP_SHADOW_UPDATE_ENABLE :0 ); +vp_reg_write (ctx,VP_SHADOW_UPDATE ,VP_SHADOW_UPDATE_ENABLE ); }static void mixer_cfg_scan (struct mixer_context *ctx,int width,int height)
@@ -498,7 +546,6 @@ static void vp_video_buffer(struct mixer_context *ctx,spin_lock_irqsave (&ctx->reg_slock, flags); -vp_reg_write (ctx,VP_SHADOW_UPDATE ,1 );/* interlace or progressive scan mode */ val = (test_bit (MXR_BIT_INTERLACE , &ctx->flags) ? ~0 :0 );vp_reg_writemask (ctx,VP_MODE , val,VP_MODE_LINE_SKIP );
@@ -553,11 +600,6 @@ static void vp_video_buffer(struct mixer_context *ctx,vp_regs_dump (ctx); } -static void mixer_layer_update (struct mixer_context *ctx) -{ -mixer_reg_writemask (ctx,MXR_CFG , ~0 ,MXR_CFG_LAYER_UPDATE ); -} -static void mixer_graph_buffer (struct mixer_context *ctx,struct exynos_drm_plane *plane) {
@@ -640,11 +682,6 @@ static void mixer_graph_buffer(struct mixer_context *ctx,mixer_cfg_layer (ctx, win, priority, true);mixer_cfg_gfx_blend (ctx, win, pixel_alpha, state->base.alpha); -/* layer update mandatory for mixer 16.0.33.0 */ -if (ctx->mxr_ver ==MXR_VER_16_0_33_0 || - ctx->mxr_ver ==MXR_VER_128_0_0_184 ) -mixer_layer_update (ctx); -spin_unlock_irqrestore (&ctx->reg_slock, flags);mixer_regs_dump (ctx);
@@ -709,7 +746,7 @@ static void mixer_win_reset(struct mixer_context *ctx)static irqreturn_t mixer_irq_handler (int irq,void *arg) {struct mixer_context *ctx = arg; -u32 val, base, shadow; +u32 val;spin_lock (&ctx->reg_slock);
@@ -723,26 +760,9 @@ static irqreturn_t mixer_irq_handler(int irq, void *arg) val &= ~MXR_INT_STATUS_VSYNC ;/* interlace scan need to check shadow register */ -if (test_bit (MXR_BIT_INTERLACE , &ctx->flags)) { -if (test_bit (MXR_BIT_VP_ENABLED , &ctx->flags) && -vp_reg_read (ctx,VP_SHADOW_UPDATE )) - goto out; - - base =mixer_reg_read (ctx,MXR_CFG ); - shadow =mixer_reg_read (ctx,MXR_CFG_S ); -if (base != shadow) - goto out; - - base =mixer_reg_read (ctx,MXR_GRAPHIC_BASE (0 )); - shadow =mixer_reg_read (ctx,MXR_GRAPHIC_BASE_S (0 )); -if (base != shadow) - goto out; - - base =mixer_reg_read (ctx,MXR_GRAPHIC_BASE (1 )); - shadow =mixer_reg_read (ctx,MXR_GRAPHIC_BASE_S (1 )); -if (base != shadow) - goto out; - } +if (test_bit (MXR_BIT_INTERLACE , &ctx->flags) + && !mixer_is_synced (ctx)) + goto out;drm_crtc_handle_vblank (&ctx->crtc->base); }
@@ -917,12 +937,14 @@ static void mixer_disable_vblank(struct exynos_drm_crtc *crtc)static void mixer_atomic_begin (struct exynos_drm_crtc *crtc) { -struct mixer_context *mixer_ctx = crtc->ctx; +struct mixer_context *ctx = crtc->ctx; -if (!test_bit (MXR_BIT_POWERED , &mixer_ctx->flags)) +if (!test_bit (MXR_BIT_POWERED , &ctx->flags))return ; -mixer_vsync_set_update (mixer_ctx, false); +if (mixer_wait_for_sync (ctx)) +dev_err (ctx->dev,"timeout waiting for VSYNC\n" ); +mixer_disable_sync (ctx); } static void mixer_update_plane(struct exynos_drm_crtc *crtc,
@@ -964,7 +986,7 @@ static void mixer_atomic_flush(struct exynos_drm_crtc *crtc)if (!test_bit (MXR_BIT_POWERED , &mixer_ctx->flags))return ; -mixer_vsync_set_update (mixer_ctx, true); +mixer_enable_sync (mixer_ctx);exynos_crtc_handle_event (crtc); }
@@ -979,7 +1001,7 @@ static void mixer_enable(struct exynos_drm_crtc *crtc)exynos_drm_pipe_clk_enable (crtc, true); -mixer_vsync_set_update (ctx, false); +mixer_disable_sync (ctx);mixer_reg_writemask (ctx,MXR_STATUS , ~0 ,MXR_STATUS_SOFT_RESET );
@@ -992,7 +1014,7 @@ static void mixer_enable(struct exynos_drm_crtc *crtc)mixer_commit (ctx); -mixer_vsync_set_update (ctx, true); +mixer_enable_sync (ctx);set_bit (MXR_BIT_POWERED , &ctx->flags); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 53/93 irqchip/stm32: Dont clear rising/falling config registers at init
In reply to Greg Kroah-Hartman[ Upstream commit 0dda09666f50eae9c5b794dd89b1fd8a8d89d714 ]
Falling and rising configuration and status registers are not banked. As they are shared with M4 co-processor, they should not be cleared at probe time, else M4 co-processor configuration will be lost.
--- drivers/irqchip/irq-stm32-exti.c | 5 ----- 1 file changed, 5 deletions(-)
drivers/irqchip/irq-stm32-exti.c +0 -5
@@ -735,11 +735,6 @@ stm32_exti_chip_data *stm32_exti_chip_init(struct stm32_exti_host_data *h_data,*/ writel_relaxed (0 , base + stm32_bank->imr_ofst);writel_relaxed (0 , base + stm32_bank->emr_ofst); -writel_relaxed (0 , base + stm32_bank->rtsr_ofst); -writel_relaxed (0 , base + stm32_bank->ftsr_ofst); -writel_relaxed (~0UL , base + stm32_bank->rpr_ofst); -if (stm32_bank->fpr_ofst !=UNDEF_REG ) -writel_relaxed (~0UL , base + stm32_bank->fpr_ofst);pr_info ("%pOF: bank%d\n" , h_data->node, bank_idx);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 54/93 irqchip/stm32: Dont set rising configuration registers at init
In reply to Greg Kroah-Hartman[ Upstream commit 6a77623d78b307b34d4cf7886da6a907689bf388 ]
The rising configuration status register (rtsr) is not banked. As it is shared with the co-processor, it should not be written at probe time, else the co-processor configuration will be lost.
--- drivers/irqchip/irq-stm32-exti.c | 5 ----- 1 file changed, 5 deletions(-)
drivers/irqchip/irq-stm32-exti.c +0 -5
@@ -716,7 +716,6 @@ stm32_exti_chip_data *stm32_exti_chip_init(struct stm32_exti_host_data *h_data,const struct stm32_exti_bank *stm32_bank;struct stm32_exti_chip_data *chip_data;void __iomem *base = h_data->base; -u32 irqs_mask; stm32_bank = h_data->drv_data->exti_banks[bank_idx]; chip_data = &h_data->chips_data[bank_idx];
@@ -725,10 +724,6 @@ stm32_exti_chip_data *stm32_exti_chip_init(struct stm32_exti_host_data *h_data,raw_spin_lock_init (&chip_data->rlock); -/* Determine number of irqs supported */ -writel_relaxed (~0UL , base + stm32_bank->rtsr_ofst); - irqs_mask =readl_relaxed (base + stm32_bank->rtsr_ofst); -/* * This IP has no reset, so after hot reboot we should * clear registers to avoid residue
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 55/93 irqchip/mbigen: Dont clear eventid when freeing an MSI
In reply to Greg Kroah-Hartman[ Upstream commit fca269f201a8d9985c0a31fb60b15d4eb57cef80 ]
mbigen_write_msg clears eventid bits of a mbigen register when free a interrupt, because msi_domain_deactivate memset struct msg to zero. Then multiple mbigen pins with zero eventid will report the same interrupt number.
The eventid clear call trace:
free_irq
__free_irq
irq_shutdown
irq_domain_deactivate_irq
__irq_domain_deactivate_irq
__irq_domain_deactivate_irq
msi_domain_deactivate
platform_msi_write_msg
mbigen_write_msg--- drivers/irqchip/irq-mbigen.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/irqchip/irq-mbigen.c +3 -0
@@ -161,6 +161,9 @@ static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)void __iomem *base = d->chip_data;u32 val; +if (!msg->address_lo && !msg->address_hi) +return ; + base +=get_mbigen_vec_reg (d->hwirq); val =readl_relaxed (base);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 56/93 x86/hpet: Prevent potential NULL pointer dereference
In reply to Greg Kroah-Hartman[ Upstream commit 2e84f116afca3719c9d0a1a78b47b48f75fd5724 ]
hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check.
Add a check to prevent NULL pointer dereference.
--- arch/x86/kernel/hpet.c | 2 ++ 1 file changed, 2 insertions(+)
arch/x86/kernel/hpet.c +2 -0
@@ -905,6 +905,8 @@ int __init hpet_enable(void)return 0 ;hpet_set_mapping (); +if (!hpet_virt_address) +return 0 ;/* * Read the period and check for a sane value:
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 57/93 x86/hyperv: Prevent potential NULL pointer dereference
In reply to Greg Kroah-Hartman[ Upstream commit 534c89c22e26b183d838294f0937ee092c82ad3a ]
The page allocation in hv_cpu_init() can fail, but the code does not have a check for that.
Add a check and return -ENOMEM when the allocation fails.
[ tglx: Massaged changelog ]
--- arch/x86/hyperv/hv_init.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/x86/hyperv/hv_init.c +5 -1
@@ -102,9 +102,13 @@ static int hv_cpu_init(unsigned int cpu)u64 msr_vp_index;struct hv_vp_assist_page **hvp = &hv_vp_assist_page[smp_processor_id ()];void **input_arg; +struct page *pg; input_arg = (void **)this_cpu_ptr (hyperv_pcpu_input_arg); - *input_arg =page_address (alloc_page (GFP_KERNEL )); + pg =alloc_page (GFP_KERNEL ); +if (unlikely (!pg)) +return -ENOMEM ; + *input_arg =page_address (pg);hv_get_vp_index (msr_vp_index);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 58/93 x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
In reply to Greg Kroah-Hartman[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]
There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling sequence. The calling order must be:
outb(CX86_CCR2, 0x22); inb(0x23);
Quoted 1 line
From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead. Tested on an actual Geode processor.
--- arch/x86/kernel/cpu/cyrix.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/x86/kernel/cpu/cyrix.c +7 -7
@@ -124,7 +124,7 @@ static void set_cx86_reorder(void)setCx86 (CX86_CCR3 , (ccr3 &0x0f ) |0x10 );/* enable MAPEN */ /* Load/Store Serialize to mem access disable (=reorder it) */ -setCx86_old (CX86_PCR0 ,getCx86_old (CX86_PCR0 ) & ~0x80 ); +setCx86 (CX86_PCR0 ,getCx86 (CX86_PCR0 ) & ~0x80 );/* set load/store serialize from 1GB to 4GB */ ccr3 |=0xe0 ;setCx86 (CX86_CCR3 , ccr3);
@@ -135,11 +135,11 @@ static void set_cx86_memwb(void)pr_info ("Enable Memory-Write-back mode on Cyrix/NSC processor.\n" );/* CCR2 bit 2: unlock NW bit */ -setCx86_old (CX86_CCR2 ,getCx86_old (CX86_CCR2 ) & ~0x04 ); +setCx86 (CX86_CCR2 ,getCx86 (CX86_CCR2 ) & ~0x04 );/* set 'Not Write-through' */ write_cr0 (read_cr0 () |X86_CR0_NW );/* CCR2 bit 2: lock NW bit and set WT1 */ -setCx86_old (CX86_CCR2 ,getCx86_old (CX86_CCR2 ) |0x14 ); +setCx86 (CX86_CCR2 ,getCx86 (CX86_CCR2 ) |0x14 ); }/*
@@ -153,14 +153,14 @@ static void geode_configure(void)local_irq_save (flags);/* Suspend on halt power saving and enable #SUSP pin */ -setCx86_old (CX86_CCR2 ,getCx86_old (CX86_CCR2 ) |0x88 ); +setCx86 (CX86_CCR2 ,getCx86 (CX86_CCR2 ) |0x88 ); ccr3 =getCx86 (CX86_CCR3 );setCx86 (CX86_CCR3 , (ccr3 &0x0f ) |0x10 );/* enable MAPEN */ /* FPU fast, DTE cache, Mem bypass */ -setCx86_old (CX86_CCR4 ,getCx86_old (CX86_CCR4 ) |0x38 ); +setCx86 (CX86_CCR4 ,getCx86 (CX86_CCR4 ) |0x38 );setCx86 (CX86_CCR3 , ccr3);/* disable MAPEN */ set_cx86_memwb ();
@@ -296,7 +296,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)/* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level ==2 ) {/* Enable cxMMX extensions (GX1 Datasheet 54) */ -setCx86_old (CX86_CCR7 ,getCx86_old (CX86_CCR7 ) |1 ); +setCx86 (CX86_CCR7 ,getCx86 (CX86_CCR7 ) |1 );/* * GXm : 0x30 ... 0x5f GXm datasheet 51
@@ -319,7 +319,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)if (dir1 >7 ) { dir0_msn++;/* M II */ /* Enable MMX extensions (App note 108) */ -setCx86_old (CX86_CCR7 ,getCx86_old (CX86_CCR7 )|1 ); +setCx86 (CX86_CCR7 ,getCx86 (CX86_CCR7 )|1 ); }else {/* A 6x86MX - it has the bug. */ set_cpu_bug (c,X86_BUG_COMA );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 59/93 drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
In reply to Greg Kroah-Hartman[ Upstream commit 909e9c9c428376e2a43d178ed4b0a2d5ba9cb7d3 ]
pm_runtime_get_sync returns negative on failure.
--- drivers/gpu/drm/nouveau/nouveau_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_debugfs.c +1 -1
@@ -181,7 +181,7 @@ nouveau_debugfs_pstate_set(struct file *file, const char __user *ubuf, } ret =pm_runtime_get_sync (drm->dev); -if (IS_ERR_VALUE (ret) && ret != -EACCES ) +if (ret <0 && ret != -EACCES )return ret; ret =nvif_mthd (ctrl,NVIF_CONTROL_PSTATE_USER , &args,sizeof (args));pm_runtime_put_autosuspend (drm->dev);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 60/93 iommu/vt-d: Check capability before disabling protected memory
In reply to Greg Kroah-Hartman[ Upstream commit 5bb71fc790a88d063507dc5d445ab8b14e845591 ]
The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register).
--- drivers/iommu/intel-iommu.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/iommu/intel-iommu.c +3 -0
@@ -1534,6 +1534,9 @@ static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)u32 pmen;unsigned long flags; +if (!cap_plmr (iommu->cap) && !cap_phmr (iommu->cap)) +return ; +raw_spin_lock_irqsave (&iommu->register_lock, flags); pmen =readl (iommu->reg +DMAR_PMEN_REG ); pmen &= ~DMA_PMEN_EPM ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 61/93 iommu/vt-d: Save the right domain ID used by hardware
In reply to Greg Kroah-Hartman[ Upstream commit 84c11e4df5aa4955acaa441f0cf1cb2e50daf64b ]
The driver sets a default domain id (FLPT_DEFAULT_DID) in the first level only pasid entry, but saves a different domain id in @sdev->did. The value saved in @sdev->did will be used to invalidate the translation caches. Hence, the driver might result in invalidating the caches with a wrong domain id.
--- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +1 -1
@@ -5331,7 +5331,7 @@ int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sd ctx_lo = context[0 ].lo; - sdev->did = domain->iommu_did[iommu->seq_id]; + sdev->did =FLPT_DEFAULT_DID ; sdev->sid =PCI_DEVID (info->bus, info->devfn);if (!(ctx_lo &CONTEXT_PASIDE )) {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 62/93 x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
In reply to Greg Kroah-Hartman[ Upstream commit e898e69d6b9475bf123f99b3c5d1a67bb7cb2361 ]
When building with -Wsometimes-uninitialized, Clang warns:
arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications.
--- arch/x86/kernel/hw_breakpoint.c | 1 + 1 file changed, 1 insertion(+)
arch/x86/kernel/hw_breakpoint.c +1 -0
@@ -357,6 +357,7 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,#endif default :WARN_ON_ONCE (1 ); +return -EINVAL ; }/*
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 63/93 cifs: fix that return -EINVAL when do dedupe operation
In reply to Greg Kroah-Hartman[ Upstream commit b073a08016a10f01dfb0d0b6c7fa89da0d544963 ]
dedupe_file_range operations is combiled into remap_file_range. But it's always skipped for dedupe operations in function cifs_remap_file_range.
Example to test:
Before this patch:
# dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Invalid argument
After this patch:
# dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Operation not supported
Influence for xfstests:
generic/091
generic/112
generic/127
generic/263
These tests report this error "do_copy_range:: Invalid argument" instead of "FIDEDUPERANGE: Invalid argument". Because there are still two bugs cause these test failed.
https://bugzilla.kernel.org/show_bug.cgi?id=202935
https://bugzilla.kernel.org/show_bug.cgi?id=202785
--- fs/cifs/cifsfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/cifsfs.c +1 -1
@@ -1010,7 +1010,7 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off,unsigned int xid;int rc; -if (remap_flags & ~REMAP_FILE_ADVISORY ) +if (remap_flags & ~(REMAP_FILE_DEDUP |REMAP_FILE_ADVISORY ))return -EINVAL ;cifs_dbg (FYI ,"clone range\n" );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 64/93 fix incorrect error code mapping for OBJECTID_NOT_FOUND
In reply to Greg Kroah-Hartman[ Upstream commit 85f9987b236cf46e06ffdb5c225cf1f3c0acb789 ]
It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one).
As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA.
--- fs/cifs/smb2maperror.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/cifs/smb2maperror.c +2 -1
@@ -1036,7 +1036,8 @@ static const struct status_to_posix_error smb2_error_map_table[] = { {STATUS_UNFINISHED_CONTEXT_DELETED , -EIO , "STATUS_UNFINISHED_CONTEXT_DELETED"}, {STATUS_NO_TGT_REPLY, -EIO, "STATUS_NO_TGT_REPLY"}, - {STATUS_OBJECTID_NOT_FOUND, -EIO, "STATUS_OBJECTID_NOT_FOUND"}, +/* Note that ENOATTTR and ENODATA are the same errno */ + {STATUS_OBJECTID_NOT_FOUND, -ENODATA, "STATUS_OBJECTID_NOT_FOUND"}, {STATUS_NO_IP_ADDRESSES, -EIO, "STATUS_NO_IP_ADDRESSES"}, {STATUS_WRONG_CREDENTIAL_HANDLE, -EIO, "STATUS_WRONG_CREDENTIAL_HANDLE"},
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 65/93 cifs: Fix slab-out-of-bounds when tracing SMB tcon
In reply to Greg Kroah-Hartman[ Upstream commit 68ddb496800acdb46172b4981dc3753ea9b39c25 ]
This patch fixes the following KASAN report:
[ 779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180 [ 779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812
[ 779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62 [ 779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 [ 779.044761] Call Trace: [ 779.044769] dump_stack+0x5b/0x90 [ 779.044775] ? string+0xab/0x180 [ 779.044781] print_address_description+0x6c/0x23c [ 779.044787] ? string+0xab/0x180 [ 779.044792] ? string+0xab/0x180 [ 779.044797] kasan_report.cold.3+0x1a/0x32 [ 779.044803] ? string+0xab/0x180 [ 779.044809] string+0xab/0x180 [ 779.044816] ? widen_string+0x160/0x160 [ 779.044822] ? vsnprintf+0x5bf/0x7f0 [ 779.044829] vsnprintf+0x4e7/0x7f0 [ 779.044836] ? pointer+0x4a0/0x4a0 [ 779.044841] ? seq_buf_vprintf+0x79/0xc0 [ 779.044848] seq_buf_vprintf+0x62/0xc0 [ 779.044855] trace_seq_printf+0x113/0x210 [ 779.044861] ? trace_seq_puts+0x110/0x110 [ 779.044867] ? trace_raw_output_prep+0xd8/0x110 [ 779.044876] trace_raw_output_smb3_tcon_class+0x9f/0xc0 [ 779.044882] print_trace_line+0x377/0x890 [ 779.044888] ? tracing_buffers_read+0x300/0x300 [ 779.044893] ? ring_buffer_read+0x58/0x70 [ 779.044899] s_show+0x6e/0x140 [ 779.044906] seq_read+0x505/0x6a0 [ 779.044913] vfs_read+0xaf/0x1b0 [ 779.044919] ksys_read+0xa1/0x130 [ 779.044925] ? kernel_write+0xa0/0xa0 [ 779.044931] ? __do_page_fault+0x3d5/0x620 [ 779.044938] do_syscall_64+0x63/0x150 [ 779.044944] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.044949] RIP: 0033:0x7f62c2c2db31 [ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02 02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89 [ 779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003 [ 779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710 [ 779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000
[ 779.044981] Allocated by task 1257: [ 779.044987] __kasan_kmalloc.constprop.5+0xc1/0xd0 [ 779.044992] kmem_cache_alloc+0xad/0x1a0 [ 779.044997] getname_flags+0x6c/0x2a0 [ 779.045003] user_path_at_empty+0x1d/0x40 [ 779.045008] do_faccessat+0x12a/0x330 [ 779.045012] do_syscall_64+0x63/0x150 [ 779.045017] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.045019] Freed by task 1257: [ 779.045023] __kasan_slab_free+0x12e/0x180 [ 779.045029] kmem_cache_free+0x85/0x1b0 [ 779.045034] filename_lookup.part.70+0x176/0x250 [ 779.045039] do_faccessat+0x12a/0x330 [ 779.045043] do_syscall_64+0x63/0x150 [ 779.045048] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 779.045052] The buggy address belongs to the object at ffff88814f326600 which belongs to the cache names_cache of size 4096 [ 779.045057] The buggy address is located 872 bytes to the right of 4096-byte region [ffff88814f326600, ffff88814f327600) [ 779.045058] The buggy address belongs to the page: [ 779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0 [ 779.045067] flags: 0x200000000010200(slab|head) [ 779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40 [ 779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 779.045083] page dumped because: kasan: bad access detected
[ 779.045085] Memory state around the buggy address: [ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045099] ^ [ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045109] ================================================================== [ 779.045110] Disabling lock debugging due to kernel taint
Correctly assign tree name str for smb3_tcon event.
--- fs/cifs/trace.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
fs/cifs/trace.h +3 -3
@@ -378,19 +378,19 @@ DECLARE_EVENT_CLASS(smb3_tcon_class, __field(unsigned int, xid) __field(__u32, tid) __field(__u64, sesid) - __field(const char *, unc_name) + __string(name, unc_name) __field(int, rc) ),TP_fast_assign ( __entry->xid = xid; __entry->tid = tid; __entry->sesid = sesid; - __entry->unc_name = unc_name; +__assign_str (name, unc_name); __entry->rc = rc; ), TP_printk("xid=%u sid=0x%llx tid=0x%x unc_name=%s rc=%d", __entry->xid, __entry->sesid, __entry->tid, - __entry->unc_name, __entry->rc) + __get_str(name), __entry->rc) )#define DEFINE_SMB3_TCON_EVENT (name) \
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 66/93 x86/gart: Exclude GART aperture from kcore
In reply to Greg Kroah-Hartman[ Upstream commit ffc8599aa9763f39f6736a79da4d1575e7006f9a ]
On machines where the GART aperture is mapped over physical RAM, /proc/kcore contains the GART aperture range. Accessing the GART range via /proc/kcore results in a kernel crash.
vmcore used to have the same issue, until it was fixed with commit 2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging existing hook infrastructure in vmcore to let /proc/vmcore return zeroes when attempting to read the aperture region, and so it won't read from the actual memory.
Apply the same workaround for kcore. First implement the same hook infrastructure for kcore, then reuse the hook functions introduced in the previous vmcore fix. Just with some minor adjustment, rename some functions for more general usage, and simplify the hook infrastructure a bit as there is no module usage yet.
--- arch/x86/kernel/aperture_64.c | 20 +++++++++++++------- fs/proc/kcore.c | 27 +++++++++++++++++++++++++++ include/linux/kcore.h | 2 ++ 3 files changed, 42 insertions(+), 7 deletions(-)
arch/x86/kernel/aperture_64.c +13 -7
@@ -14,6 +14,7 @@#define pr_fmt (fmt) "AGP: " fmt#include <linux/kernel.h> +#include <linux/kcore.h> #include <linux/types.h> #include <linux/init.h> #include <linux/memblock.h>
@@ -57,7 +58,7 @@ int fallback_aper_force __initdata;int fix_aperture__initdata =1 ; -#ifdef CONFIG_PROC_VMCORE +#if defined(CONFIG_PROC_VMCORE ) || defined(CONFIG_PROC_KCORE )/* * If the first kernel maps the aperture over e820 RAM, the kdump kernel will * use the same range because it will remain configured in the northbridge.
@@ -66,20 +67,25 @@ int fix_aperture __initdata = 1;*/ static unsigned long aperture_pfn_start, aperture_page_count; -static int gart_oldmem_pfn_is_ram (unsigned long pfn) +static int gart_mem_pfn_is_ram (unsigned long pfn) {return likely ((pfn < aperture_pfn_start) || (pfn >= aperture_pfn_start + aperture_page_count)); } -static void exclude_from_vmcore (u64 aper_base,u32 aper_order) +static void __init exclude_from_core (u64 aper_base,u32 aper_order) { aperture_pfn_start = aper_base >>PAGE_SHIFT ; aperture_page_count = (32 *1024 *1024 ) << aper_order >>PAGE_SHIFT ; -WARN_ON (register_oldmem_pfn_is_ram (&gart_oldmem_pfn_is_ram)); +#ifdef CONFIG_PROC_VMCORE +WARN_ON (register_oldmem_pfn_is_ram (&gart_mem_pfn_is_ram)); +#endif +#ifdef CONFIG_PROC_KCORE +WARN_ON (register_mem_pfn_is_ram (&gart_mem_pfn_is_ram)); +#endif }#else -static void exclude_from_vmcore (u64 aper_base,u32 aper_order) +static void exclude_from_core (u64 aper_base,u32 aper_order) { }#endif
@@ -474,7 +480,7 @@ int __init gart_iommu_hole_init(void)* may have allocated the range over its e820 RAM * and fixed up the northbridge */ -exclude_from_vmcore (last_aper_base, last_aper_order); +exclude_from_core (last_aper_base, last_aper_order);return 1 ; }
@@ -520,7 +526,7 @@ int __init gart_iommu_hole_init(void)* overlap with the first kernel's memory. We can't access the * range through vmcore even though it should be part of the dump. */ -exclude_from_vmcore (aper_alloc, aper_order); +exclude_from_core (aper_alloc, aper_order);/* Fix up the north bridges */ for (i =0 ; i < amd_nb_bus_dev_ranges[i].dev_limit; i++) {
fs/proc/kcore.c +27 -0
@@ -54,6 +54,28 @@ static LIST_HEAD(kclist_head);static DECLARE_RWSEM (kclist_lock);static int kcore_need_update =1 ; +/* +* Returns > 0 for RAM pages, 0 for non-RAM pages, < 0 on error +* Same as oldmem_pfn_is_ram in vmcore +*/ +static int (*mem_pfn_is_ram)(unsigned long pfn); + +int __init register_mem_pfn_is_ram (int (*fn)(unsigned long pfn)) +{ +if (mem_pfn_is_ram) +return -EBUSY ; + mem_pfn_is_ram = fn; +return 0 ; +} + +static int pfn_is_ram (unsigned long pfn) +{ +if (mem_pfn_is_ram) +return mem_pfn_is_ram (pfn); +else +return 1 ; +} +/* This doesn't grab kclist_lock, so it should only be used at init time. */ void __init kclist_add (struct kcore_list *new,void *addr,size_t size,int type)
@@ -465,6 +487,11 @@ read_kcore(struct file *file, char __user *buffer, size_t buflen, loff_t *fpos) goto out; } m =NULL ;/* skip the list anchor */ + }else if (!pfn_is_ram (__pa (start) >>PAGE_SHIFT )) { +if (clear_user (buffer, tsz)) { + ret = -EFAULT ; + goto out; + } }else if (m->type ==KCORE_VMALLOC ) {vread (buf, (char *)start, tsz);/* we have to zero-fill user buffer even if no read */
include/linux/kcore.h +2 -0
@@ -44,6 +44,8 @@ void kclist_add_remap(struct kcore_list *m, void *addr, void *vaddr, size_t sz) m->vaddr = (unsigned long )vaddr; kclist_add(m, addr, sz, KCORE_REMAP); } + +extern int __init register_mem_pfn_is_ram (int (*fn)(unsigned long pfn));#else static inline void kclist_add (struct kcore_list *new,void *addr,size_t size,int type)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 67/93 ext4: prohibit fstrim in norecovery mode
In reply to Greg Kroah-Hartman[ Upstream commit 18915b5873f07e5030e6fb108a050fa7c71c59fb ]
The ext4 fstrim implementation uses the block bitmaps to find free space that can be discarded. If we haven't replayed the journal, the bitmaps will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage.
--- fs/ext4/ioctl.c | 7 +++++++ 1 file changed, 7 insertions(+)
fs/ext4/ioctl.c +7 -0
@@ -999,6 +999,13 @@ long ext4_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)if (!blk_queue_discard (q))return -EOPNOTSUPP ; +/* +* We haven't replayed the journal, so we cannot use our +* block-bitmap-guided storage zapping commands. +*/ +if (test_opt (sb,NOLOAD ) &&ext4_has_feature_journal (sb)) +return -EROFS ; +if (copy_from_user (&range, (struct fstrim_range __user *)arg,sizeof (range)))return -EFAULT ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 68/93 lkdtm: Print real addresses
In reply to Greg Kroah-Hartman[ Upstream commit 4c411157a42f122051ae3469bee0b5cabe89e139 ]
Today, when doing a lkdtm test before the readiness of the random generator, (ptrval) is printed instead of the address at which it perform the fault:
[ 1597.337030] lkdtm: Performing direct entry EXEC_USERSPACE [ 1597.337142] lkdtm: attempting ok execution at (ptrval) [ 1597.337398] lkdtm: attempting bad execution at (ptrval) [ 1597.337460] kernel tried to execute user page (77858000) -exploit attempt? (uid: 0) [ 1597.344769] Unable to handle kernel paging request for instruction fetch [ 1597.351392] Faulting instruction address: 0x77858000 [ 1597.356312] Oops: Kernel access of bad area, sig: 11 [#1]
If the lkdtm test is done later on, it prints an hashed address.
In both cases this is pointless. The purpose of the test is to ensure the kernel generates an Oops at the expected address, so real addresses needs to be printed. This patch fixes that.
--- drivers/misc/lkdtm/perms.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/misc/lkdtm/perms.c +9 -9
@@ -47,7 +47,7 @@ static noinline void execute_location(void *dst, bool write) {void (*func)(void ) = dst; -pr_info ("attempting ok execution at %p\n" , do_nothing); +pr_info ("attempting ok execution at %px\n" , do_nothing);do_nothing ();if (write ==CODE_WRITE ) {
@@ -55,7 +55,7 @@ static noinline void execute_location(void *dst, bool write)flush_icache_range ((unsigned long )dst, (unsigned long )dst +EXEC_SIZE ); } -pr_info ("attempting bad execution at %p\n" , func); +pr_info ("attempting bad execution at %px\n" , func);func (); }
@@ -66,14 +66,14 @@ static void execute_user_location(void *dst)/* Intentionally crossing kernel/user memory boundary. */ void (*func)(void ) = dst; -pr_info ("attempting ok execution at %p\n" , do_nothing); +pr_info ("attempting ok execution at %px\n" , do_nothing);do_nothing (); copied =access_process_vm (current, (unsigned long )dst, do_nothing,EXEC_SIZE ,FOLL_WRITE );if (copied <EXEC_SIZE )return ; -pr_info ("attempting bad execution at %p\n" , func); +pr_info ("attempting bad execution at %px\n" , func);func (); }
@@ -82,7 +82,7 @@ void lkdtm_WRITE_RO(void)/* Explicitly cast away "const" for the test. */ unsigned long *ptr = (unsigned long *)&rodata; -pr_info ("attempting bad rodata write at %p\n" , ptr); +pr_info ("attempting bad rodata write at %px\n" , ptr); *ptr ^=0xabcd1234 ; }
@@ -100,7 +100,7 @@ void lkdtm_WRITE_RO_AFTER_INIT(void)return ; } -pr_info ("attempting bad ro_after_init write at %p\n" , ptr); +pr_info ("attempting bad ro_after_init write at %px\n" , ptr); *ptr ^=0xabcd1234 ; }
@@ -112,7 +112,7 @@ void lkdtm_WRITE_KERN(void) size = (unsigned long )do_overwritten - (unsigned long )do_nothing; ptr = (unsigned char *)do_overwritten; -pr_info ("attempting bad %zu byte write at %p\n" , size, ptr); +pr_info ("attempting bad %zu byte write at %px\n" , size, ptr);memcpy (ptr, (unsigned char *)do_nothing, size);flush_icache_range ((unsigned long )ptr, (unsigned long )(ptr + size));
@@ -185,11 +185,11 @@ void lkdtm_ACCESS_USERSPACE(void) ptr = (unsigned long *)user_addr; -pr_info ("attempting bad read at %p\n" , ptr); +pr_info ("attempting bad read at %px\n" , ptr); tmp = *ptr; tmp +=0xc0dec0de ; -pr_info ("attempting bad write at %p\n" , ptr); +pr_info ("attempting bad write at %px\n" , ptr); *ptr = tmp;vm_munmap (user_addr,PAGE_SIZE );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 69/93 lkdtm: Add tests for NULL pointer dereference
In reply to Greg Kroah-Hartman[ Upstream commit 59a12205d3c32aee4c13ca36889fdf7cfed31126 ]
Introduce lkdtm tests for NULL pointer dereference: check access or exec at NULL address, since these errors tend to be reported differently from the general fault error text. For example from x86:
pr_alert("BUG: unable to handle kernel %s at %px\n",
address < PAGE_SIZE ? "NULL pointer dereference" : "paging request", (void *)address);
--- drivers/misc/lkdtm/core.c | 2 ++ drivers/misc/lkdtm/lkdtm.h | 2 ++ drivers/misc/lkdtm/perms.c | 18 ++++++++++++++++++ 3 files changed, 22 insertions(+)
drivers/misc/lkdtm/core.c +2 -0
@@ -152,7 +152,9 @@ static const struct crashtype crashtypes[] = {CRASHTYPE (EXEC_VMALLOC ),CRASHTYPE (EXEC_RODATA ),CRASHTYPE (EXEC_USERSPACE ), +CRASHTYPE (EXEC_NULL ),CRASHTYPE (ACCESS_USERSPACE ), +CRASHTYPE (ACCESS_NULL ),CRASHTYPE (WRITE_RO ),CRASHTYPE (WRITE_RO_AFTER_INIT ), CRASHTYPE(WRITE_KERN),
drivers/misc/lkdtm/lkdtm.h +2 -0
@@ -45,7 +45,9 @@ void lkdtm_EXEC_KMALLOC(void);void lkdtm_EXEC_VMALLOC (void );void lkdtm_EXEC_RODATA (void );void lkdtm_EXEC_USERSPACE (void ); +void lkdtm_EXEC_NULL (void );void lkdtm_ACCESS_USERSPACE (void ); +void lkdtm_ACCESS_NULL (void );/* lkdtm_refcount.c */ void lkdtm_REFCOUNT_INC_OVERFLOW (void );
drivers/misc/lkdtm/perms.c +18 -0
@@ -164,6 +164,11 @@ void lkdtm_EXEC_USERSPACE(void)vm_munmap (user_addr,PAGE_SIZE ); } +void lkdtm_EXEC_NULL (void ) +{ +execute_location (NULL ,CODE_AS_IS ); +} +void lkdtm_ACCESS_USERSPACE (void ) {unsigned long user_addr, tmp =0 ;
@@ -195,6 +200,19 @@ void lkdtm_ACCESS_USERSPACE(void)vm_munmap (user_addr,PAGE_SIZE ); } +void lkdtm_ACCESS_NULL (void ) +{ +unsigned long tmp; +unsigned long *ptr = (unsigned long *)NULL ; + +pr_info ("attempting bad read at %px\n" , ptr); + tmp = *ptr; + tmp +=0xc0dec0de ; + +pr_info ("attempting bad write at %px\n" , ptr); + *ptr = tmp; +} +void __init lkdtm_perms_init (void ) {/* Make sure we can write to __ro_after_init values during __init */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 70/93 drm/amdgpu: psp_ring_destroy cause psp->km_ring.ring_mem NULL
In reply to Greg Kroah-Hartman[ Upstream commit 14d20ec7f31ef96a2e7dcf7880b13dde1d473b56 ]
psp_ring_destroy inside psp_load_fw cause psp->km_ring.ring_mem NULL. Call Trace occurred when psp_cmd_submit.
should be psp_ring_stop instead.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +1 -1
@@ -546,7 +546,7 @@ static int psp_load_fw(struct amdgpu_device *adev)struct psp_context *psp = &adev->psp;if (amdgpu_sriov_vf (adev) && adev->in_gpu_reset) { -psp_ring_destroy (psp,PSP_RING_TYPE__KM ); +psp_ring_stop (psp,PSP_RING_TYPE__KM );/* should not destroy ring, only stop */ goto skip_memalloc; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 71/93 drm/panel: panel-innolux: set display off in innolux_panel_unprepare
In reply to Greg Kroah-Hartman[ Upstream commit 46f3ceaffa81e846677bca8668e0ad40e643cffd ]
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare().
This also fixes some mode check and irq timeout issue in MTK dsi code.
Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()
However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare.
--- drivers/gpu/drm/panel/panel-innolux-p079zca.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/gpu/drm/panel/panel-innolux-p079zca.c +5 -6
@@ -70,18 +70,12 @@ static inline struct innolux_panel *to_innolux_panel(struct drm_panel *panel)static int innolux_panel_disable (struct drm_panel *panel) {struct innolux_panel *innolux =to_innolux_panel (panel); -int err;if (!innolux->enabled)return 0 ;backlight_disable (innolux->backlight); - err =mipi_dsi_dcs_set_display_off (innolux->link); -if (err <0 ) -DRM_DEV_ERROR (panel->dev,"failed to set display off: %d\n" , - err); - innolux->enabled = false;return 0 ;
@@ -95,6 +89,11 @@ static int innolux_panel_unprepare(struct drm_panel *panel)if (!innolux->prepared)return 0 ; + err =mipi_dsi_dcs_set_display_off (innolux->link); +if (err <0 ) +DRM_DEV_ERROR (panel->dev,"failed to set display off: %d\n" , + err); + err =mipi_dsi_dcs_enter_sleep_mode (innolux->link);if (err <0 ) { DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 72/93 net: hns3: Fix NULL deref when unloading driver
In reply to Greg Kroah-Hartman[ Upstream commit c8a8045b2d0a974149d65bbe6a7acbcde93cf85b ]
When the driver is unloading, if there is a calling of ndo_open occurs between phy_disconnect() and unregister_netdev(), it will end up causing the kernel to eventually hit a NULL deref:
[14942.417828] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [14942.529878] Mem abort info: [14942.551166] ESR = 0x96000006 [14942.567070] Exception class = DABT (current EL), IL = 32 bits [14942.623081] SET = 0, FnV = 0 [14942.639112] EA = 0, S1PTW = 0 [14942.643628] Data abort info: [14942.659227] ISV = 0, ISS = 0x00000006 [14942.674870] CM = 0, WnR = 0 [14942.679449] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000224ad6ad [14942.695595] [0000000000000048] pgd=00000021e6673003, pud=00000021dbf01003, pmd=0000000000000000 [14942.723163] Internal error: Oops: 96000006 [#1] PREEMPT SMP [14942.729358] Modules linked in: hns3(O) hclge(O) pv680_mii(O) hnae3(O) [last unloaded: hclge] [14942.738907] CPU: 1 PID: 26629 Comm: kworker/u4:13 Tainted: G O 4.18.0-rc1-12928-ga960791-dirty #145 [14942.749491] Hardware name: Huawei Technologies Co., Ltd. D05/D05, BIOS Hi1620 FPGA TB BOOT BIOS B763 08/17/2018 [14942.760392] Workqueue: events_power_efficient phy_state_machine [14942.766644] pstate: 80c00009 (Nzcv daif +PAN +UAO) [14942.771918] pc : test_and_set_bit+0x18/0x38 [14942.776589] lr : netif_carrier_off+0x24/0x70 [14942.781033] sp : ffff0000121abd20 [14942.784518] x29: ffff0000121abd20 x28: 0000000000000000 [14942.790208] x27: ffff0000164d3cd8 x26: ffff8021da68b7b8 [14942.795832] x25: 0000000000000000 x24: ffff8021eb407800 [14942.801445] x23: 0000000000000000 x22: 0000000000000000 [14942.807046] x21: 0000000000000001 x20: 0000000000000000 [14942.812672] x19: 0000000000000000 x18: ffff000009781708 [14942.818284] x17: 00000000004970e8 x16: ffff00000816ad48 [14942.823900] x15: 0000000000000000 x14: 0000000000000008 [14942.829528] x13: 0000000000000000 x12: 0000000000000f65 [14942.835149] x11: 0000000000000001 x10: 00000000000009d0 [14942.840753] x9 : ffff0000121abaa0 x8 : 0000000000000000 [14942.846360] x7 : ffff000009781708 x6 : 0000000000000003 [14942.851970] x5 : 0000000000000020 x4 : 0000000000000004 [14942.857575] x3 : 0000000000000002 x2 : 0000000000000001 [14942.863180] x1 : 0000000000000048 x0 : 0000000000000000 [14942.868875] Process kworker/u4:13 (pid: 26629, stack limit = 0x00000000c909dbf3) [14942.876464] Call trace: [14942.879200] test_and_set_bit+0x18/0x38 [14942.883376] phy_link_change+0x38/0x78 [14942.887378] phy_state_machine+0x3dc/0x4f8 [14942.891968] process_one_work+0x158/0x470 [14942.896223] worker_thread+0x50/0x470 [14942.900219] kthread+0x104/0x130 [14942.903905] ret_from_fork+0x10/0x1c [14942.907755] Code: d2800022 8b400c21 f9800031 9ac32044 (c85f7c22) [14942.914185] ---[ end trace 968c9e12eb740b23 ]---
So this patch fixes it by modifying the timing to do phy_connect_direct() and phy_disconnect().
--- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++ .../net/ethernet/hisilicon/hns3/hns3_enet.c | 28 +++++++++++++++++++ .../hisilicon/hns3/hns3pf/hclge_main.c | 20 ++----------- .../hisilicon/hns3/hns3pf/hclge_mdio.c | 8 ++++-- .../hisilicon/hns3/hns3pf/hclge_mdio.h | 4 +-- 5 files changed, 40 insertions(+), 22 deletions(-)
drivers/net/ethernet/hisilicon/hns3/hnae3.h +2 -0
@@ -463,6 +463,8 @@ struct hnae3_ae_ops {int (*set_gro_en)(struct hnae3_handle *handle,int enable);u16 (*get_global_queue_id)(struct hnae3_handle *handle,u16 queue_id);void (*set_timer_task)(struct hnae3_handle *handle,bool enable); +int (*mac_connect_phy)(struct hnae3_handle *handle); +void (*mac_disconnect_phy)(struct hnae3_handle *handle); };struct hnae3_dcb_ops {
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +28 -0
@@ -3519,6 +3519,25 @@ static int hns3_init_mac_addr(struct net_device *netdev, bool init)return ret; } +static int hns3_init_phy (struct net_device *netdev) +{ +struct hnae3_handle *h =hns3_get_handle (netdev); +int ret =0 ; + +if (h->ae_algo->ops->mac_connect_phy) + ret = h->ae_algo->ops->mac_connect_phy (h); + +return ret; +} + +static void hns3_uninit_phy (struct net_device *netdev) +{ +struct hnae3_handle *h =hns3_get_handle (netdev); + +if (h->ae_algo->ops->mac_disconnect_phy) + h->ae_algo->ops->mac_disconnect_phy (h); +} +static int hns3_restore_fd_rules (struct net_device *netdev) {struct hnae3_handle *h =hns3_get_handle (netdev);
@@ -3627,6 +3646,10 @@ static int hns3_client_init(struct hnae3_handle *handle) goto out_init_ring_data; } + ret =hns3_init_phy (netdev); +if (ret) + goto out_init_phy; + ret =register_netdev (netdev);if (ret) {dev_err (priv->dev,"probe register netdev fail!\n" );
@@ -3651,6 +3674,9 @@ static int hns3_client_init(struct hnae3_handle *handle)return ret; out_reg_netdev_fail: +hns3_uninit_phy (netdev); +out_init_phy: +hns3_uninit_all_ring (priv); out_init_ring_data: (void )hns3_nic_uninit_vector_data (priv); out_init_vector_data:
@@ -3685,6 +3711,8 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)hns3_force_clear_all_rx_ring (handle); +hns3_uninit_phy (netdev); + ret =hns3_nic_uninit_vector_data (priv);if (ret)netdev_err (netdev,"uninit vector error\n" );
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +2 -18
@@ -6959,16 +6959,6 @@ static void hclge_get_mdix_mode(struct hnae3_handle *handle, *tp_mdix =ETH_TP_MDI ; } -static int hclge_init_instance_hw (struct hclge_dev *hdev) -{ -return hclge_mac_connect_phy (hdev); -} - -static void hclge_uninit_instance_hw (struct hclge_dev *hdev) -{ -hclge_mac_disconnect_phy (hdev); -} -static int hclge_init_client_instance (struct hnae3_client *client,struct hnae3_ae_dev *ae_dev) {
@@ -6988,13 +6978,6 @@ static int hclge_init_client_instance(struct hnae3_client *client,if (ret) goto clear_nic; - ret =hclge_init_instance_hw (hdev); -if (ret) { - client->ops->uninit_instance (&vport->nic, -0 ); - goto clear_nic; - } -hnae3_set_client_init_flag (client, ae_dev,1 ); if (hdev->roce_client &&
@@ -7079,7 +7062,6 @@ static void hclge_uninit_client_instance(struct hnae3_client *client,if (client->type ==HNAE3_CLIENT_ROCE )return ;if (hdev->nic_client && client->ops->uninit_instance) { -hclge_uninit_instance_hw (hdev); client->ops->uninit_instance (&vport->nic,0 ); hdev->nic_client =NULL ; vport->nic.client =NULL ;
@@ -8012,6 +7994,8 @@ static const struct hnae3_ae_ops hclge_ops = { .set_gro_en = hclge_gro_en, .get_global_queue_id = hclge_covert_handle_qid_global, .set_timer_task = hclge_set_timer_task, + .mac_connect_phy = hclge_mac_connect_phy, + .mac_disconnect_phy = hclge_mac_disconnect_phy, };static struct hnae3_ae_algo ae_algo = {
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c +6 -2
@@ -195,8 +195,10 @@ static void hclge_mac_adjust_link(struct net_device *netdev)netdev_err (netdev,"failed to configure flow control.\n" ); } -int hclge_mac_connect_phy (struct hclge_dev *hdev) +int hclge_mac_connect_phy (struct hnae3_handle *handle) { +struct hclge_vport *vport =hclge_get_vport (handle); +struct hclge_dev *hdev = vport->back;struct net_device *netdev = hdev->vport[0 ].nic.netdev;struct phy_device *phydev = hdev->hw.mac.phydev;__ETHTOOL_DECLARE_LINK_MODE_MASK (mask) = {0 , };
@@ -229,8 +231,10 @@ int hclge_mac_connect_phy(struct hclge_dev *hdev)return 0 ; } -void hclge_mac_disconnect_phy (struct hclge_dev *hdev) +void hclge_mac_disconnect_phy (struct hnae3_handle *handle) { +struct hclge_vport *vport =hclge_get_vport (handle); +struct hclge_dev *hdev = vport->back;struct phy_device *phydev = hdev->hw.mac.phydev;if (!phydev)
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h +2 -2
@@ -5,8 +5,8 @@#define __HCLGE_MDIO_Hint hclge_mac_mdio_config (struct hclge_dev *hdev); -int hclge_mac_connect_phy (struct hclge_dev *hdev); -void hclge_mac_disconnect_phy (struct hclge_dev *hdev); +int hclge_mac_connect_phy (struct hnae3_handle *handle); +void hclge_mac_disconnect_phy (struct hnae3_handle *handle);void hclge_mac_start_phy (struct hclge_dev *hdev);void hclge_mac_stop_phy (struct hclge_dev *hdev);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 73/93 crypto: axis - fix for recursive locking from bottom half
In reply to Greg Kroah-Hartman[ Upstream commit c34a83820f59bb275e5f2d55cd5ea99c64f6ef23 ]
Clients may submit a new requests from the completion callback context. The driver was not prepared to receive a request in this state because it already held the request queue lock and a recursive lock error is triggered.
Now all completions are queued up until we are ready to drop the queue lock and then delivered.
The fault was triggered by TCP over an IPsec connection in the LTP test suite:
LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535")
BUG: spinlock recursion on CPU#1, genload/943 lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1 CPU: 1 PID: 943 Comm: genload Tainted: G O 4.9.62-axis5-devel #6 Hardware name: Axis ARTPEC-6 Platform (unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c) (show_stack) from [<803a289c>] (dump_stack+0x84/0x98) (dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128) (do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0) (artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c) (artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4]) (ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4) (xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc) (xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4) (ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c) (tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc) (tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac) (tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74) (tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0) (ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104) (ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144) (xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c) (xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c) (artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec) (tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4) (__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c) (irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc) (__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94) (gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80)
--- drivers/crypto/axis/artpec6_crypto.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-)
drivers/crypto/axis/artpec6_crypto.c +23 -5
@@ -284,6 +284,7 @@ enum artpec6_crypto_hash_flags {struct artpec6_crypto_req_common {struct list_head list; +struct list_head complete_in_progress;struct artpec6_crypto_dma_descriptors *dma;struct crypto_async_request *req;void (*complete)(struct crypto_async_request *req);
@@ -2045,7 +2046,8 @@ static int artpec6_crypto_prepare_aead(struct aead_request *areq)return artpec6_crypto_dma_map_descs (common); } -static void artpec6_crypto_process_queue (struct artpec6_crypto *ac) +static void artpec6_crypto_process_queue (struct artpec6_crypto *ac, +struct list_head *completions) {struct artpec6_crypto_req_common *req;
@@ -2056,7 +2058,7 @@ static void artpec6_crypto_process_queue(struct artpec6_crypto *ac)list_move_tail (&req->list, &ac->pending);artpec6_crypto_start_dma (req); - req->req->complete (req->req, -EINPROGRESS ); +list_add_tail (&req->complete_in_progress, completions); }/*
@@ -2086,6 +2088,11 @@ static void artpec6_crypto_task(unsigned long data)struct artpec6_crypto *ac = (struct artpec6_crypto *)data;struct artpec6_crypto_req_common *req;struct artpec6_crypto_req_common *n; +struct list_head complete_done; +struct list_head complete_in_progress; + +INIT_LIST_HEAD (&complete_done); +INIT_LIST_HEAD (&complete_in_progress);if (list_empty (&ac->pending)) {pr_debug ("Spurious IRQ\n" );
@@ -2119,19 +2126,30 @@ static void artpec6_crypto_task(unsigned long data)pr_debug ("Completing request %p\n" , req); -list_del (&req->list); +list_move_tail (&req->list, &complete_done);artpec6_crypto_dma_unmap_all (req);artpec6_crypto_copy_bounce_buffers (req); ac->pending_count--;artpec6_crypto_common_destroy (req); - req->complete (req->req); } -artpec6_crypto_process_queue (ac); +artpec6_crypto_process_queue (ac, &complete_in_progress);spin_unlock_bh (&ac->queue_lock); + +/* Perform the completion callbacks without holding the queue lock +* to allow new request submissions from the callbacks. +*/ +list_for_each_entry_safe (req, n, &complete_done, list) { + req->complete (req->req); + } + +list_for_each_entry_safe (req, n, &complete_in_progress, + complete_in_progress) { + req->req->complete (req->req, -EINPROGRESS ); + } }static void artpec6_crypto_complete_crypto (struct crypto_async_request *req)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 74/93 Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"
In reply to Greg Kroah-Hartman[ Upstream commit b6a3e1475b0220378ad32bdf4d8692f058b1fc03 ]
On some Samsung hardware, it is necessary to clear events accumulated by the EC during sleep. These ECs stop reporting GPEs until they are manually polled, if too many events are accumulated.
Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands unconditionally after resume to clear all the EC query events on those platforms.
Later, commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk") removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ polling logic should handle this case.
Now it has been proved that the EC IRQ Polling logic does not fix the issue actually because we got regression report on these Samsung platforms after removing the quirk.
Thus revert commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk") to introduce back the Samsung quirk in this patch.
--- drivers/acpi/ec.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
drivers/acpi/ec.c +53 -0
@@ -194,6 +194,7 @@ static struct workqueue_struct *ec_query_wq;static int EC_FLAGS_QUERY_HANDSHAKE ;/* Needs QR_EC issued when SCI_EVT set */ static int EC_FLAGS_CORRECT_ECDT ;/* Needs ECDT port address correction */ static int EC_FLAGS_IGNORE_DSDT_GPE ;/* Needs ECDT GPE as correction setting */ +static int EC_FLAGS_CLEAR_ON_RESUME ;/* Needs acpi_ec_clear() on boot/resume */ /* -------------------------------------------------------------------------- * Logging/Debugging
@@ -499,6 +500,26 @@ static inline void __acpi_ec_disable_event(struct acpi_ec *ec)ec_log_drv ("event blocked" ); } +/* +* Process _Q events that might have accumulated in the EC. +* Run with locked ec mutex. +*/ +static void acpi_ec_clear (struct acpi_ec *ec) +{ +int i, status; +u8 value =0 ; + +for (i =0 ; i <ACPI_EC_CLEAR_MAX ; i++) { + status =acpi_ec_query (ec, &value); +if (status || !value) +break ; + } +if (unlikely (i ==ACPI_EC_CLEAR_MAX )) +pr_warn ("Warning: Maximum of %d stale EC events cleared\n" , i); +else +pr_info ("%d stale EC events cleared\n" , i); +} +static void acpi_ec_enable_event (struct acpi_ec *ec) {unsigned long flags;
@@ -507,6 +528,10 @@ static void acpi_ec_enable_event(struct acpi_ec *ec)if (acpi_ec_started (ec))__acpi_ec_enable_event (ec);spin_unlock_irqrestore (&ec->lock, flags); + +/* Drain additional events if hardware requires that */ +if (EC_FLAGS_CLEAR_ON_RESUME ) +acpi_ec_clear (ec); }#ifdef CONFIG_PM_SLEEP
@@ -1820,6 +1845,31 @@ static int ec_flag_query_handshake(const struct dmi_system_id *id) }#endif +/* +* On some hardware it is necessary to clear events accumulated by the EC during +* sleep. These ECs stop reporting GPEs until they are manually polled, if too +* many events are accumulated. (e.g. Samsung Series 5/9 notebooks) +* +* https://bugzilla.kernel.org/show_bug.cgi?id=44161 +* +* Ideally, the EC should also be instructed NOT to accumulate events during +* sleep (which Windows seems to do somehow), but the interface to control this +* behaviour is not known at this time. +* +* Models known to be affected are Samsung 530Uxx/535Uxx/540Uxx/550Pxx/900Xxx, +* however it is very likely that other Samsung models are affected. +* +* On systems which don't accumulate _Q events during sleep, this extra check +* should be harmless. +*/ +static int ec_clear_on_resume (const struct dmi_system_id *id) +{ +pr_debug ("Detected system needing EC poll on resume.\n" ); +EC_FLAGS_CLEAR_ON_RESUME =1 ; + ec_event_clearing =ACPI_EC_EVT_TIMING_STATUS ; +return 0 ; +} +/* * Some ECDTs contain wrong register addresses. * MSI MS-171F
@@ -1869,6 +1919,9 @@ static const struct dmi_system_id ec_dmi_table[] __initconst = { ec_honor_ecdt_gpe, "ASUS X580VD", {DMI_MATCH (DMI_SYS_VENDOR ,"ASUSTeK COMPUTER INC." ), DMI_MATCH(DMI_PRODUCT_NAME, "X580VD"),}, NULL}, + { + ec_clear_on_resume, "Samsung hardware", { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL}, {}, };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 75/93 RDMA/hns: Fix the Oops during rmmod or insmod ko when reset occurs
In reply to Greg Kroah-Hartman[ Upstream commit d061effc36f7bd38a12912977a37a50ac9140d11 ]
In the reset process, the hns3 NIC driver notifies the RoCE driver to perform reset related processing by calling the .reset_notify() interface registered by the RoCE driver in hip08 SoC.
In the current version, if a reset occurs simultaneously during the execution of rmmod or insmod ko, there may be Oops error as below:
Internal error: Oops: 86000007 [#1] PREEMPT SMP Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G O 4.19.0-ge00d540 #1 Hardware name: Huawei Technologies Co., Ltd. Workqueue: events hclge_reset_service_task [hclge] pstate: 60c00009 (nZCv daif +PAN +UAO) pc : 0xffff00000100b0b8 lr : 0xffff00000100aea0 sp : ffff000009afbab0 x29: ffff000009afbab0 x28: 0000000000000800 x27: 0000000000007ff0 x26: ffff80002f90c004 x25: 00000000000007ff x24: ffff000008f97000 x23: ffff80003efee0a8 x22: 0000000000001000 x21: ffff80002f917ff0 x20: ffff8000286ea070 x19: 0000000000000800 x18: 0000000000000400 x17: 00000000c4d3225d x16: 00000000000021b8 x15: 0000000000000400 x14: 0000000000000400 x13: 0000000000000000 x12: ffff80003fac6e30 x11: 0000800036303000 x10: 0000000000000001 x9 : 0000000000000000 x8 : ffff80003016d000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000000 x3 : 0000000000000004 x2 : 00000000000007ff x1 : 0000000000000000 x0 : 0000000000000000 Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9) Call trace: 0xffff00000100b0b8 0xffff00000100b3a0 hns_roce_init+0x624/0xc88 [hns_roce] 0xffff000001002df8 0xffff000001006960 hclge_notify_roce_client+0x74/0xe0 [hclge] hclge_reset_service_task+0xa58/0xbc0 [hclge] process_one_work+0x1e4/0x458 worker_thread+0x40/0x450 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 Code: bad PC value
In the reset process, we will release the resources firstly, and after the hardware reset is completed, we will reapply resources and reconfigure the hardware.
We can solve this problem by modifying both the NIC and the RoCE driver. We can modify the concurrent processing in the NIC driver to avoid calling the .reset_notify and .uninit_instance ops at the same time. And we need to modify the RoCE driver to record the reset stage and the driver's init/uninit state, and check the state in the .reset_notify, .init_instance. and uninit_instance functions to avoid NULL pointer operation.
--- drivers/infiniband/hw/hns/hns_roce_device.h | 21 ++++ drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 103 +++++++++++++++++--- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 1 + 3 files changed, 112 insertions(+), 13 deletions(-)
drivers/infiniband/hw/hns/hns_roce_device.h +21 -0
@@ -216,6 +216,26 @@ enum { HNS_ROCE_DB_PER_PAGE = PAGE_SIZE / 4 }; +enum hns_roce_reset_stage { +HNS_ROCE_STATE_NON_RST , +HNS_ROCE_STATE_RST_BEF_DOWN , +HNS_ROCE_STATE_RST_DOWN , +HNS_ROCE_STATE_RST_UNINIT , +HNS_ROCE_STATE_RST_INIT , +HNS_ROCE_STATE_RST_INITED , +}; + +enum hns_roce_instance_state { +HNS_ROCE_STATE_NON_INIT , +HNS_ROCE_STATE_INIT , +HNS_ROCE_STATE_INITED , +HNS_ROCE_STATE_UNINIT , +}; + +enum { +HNS_ROCE_RST_DIRECT_RETURN =0 , +}; +#define HNS_ROCE_CMD_SUCCESS 1#define HNS_ROCE_PORT_DOWN 0
@@ -898,6 +918,7 @@ struct hns_roce_dev {spinlock_t bt_cmd_lock;bool active;bool is_reset; +unsigned long reset_cnt;struct hns_roce_ib_iboe iboe;struct list_head pgdir_list;
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +90 -13
175 lines not on this page · raw message
drivers/infiniband/hw/hns/hns_roce_hw_v2.h +1 -0
@@ -1546,6 +1546,7 @@ struct hns_roce_link_table_entry {#define HNS_ROCE_LINK_TABLE_NXT_PTR_M GENMASK(31, 20)struct hns_roce_v2_priv { +struct hnae3_handle *handle;struct hns_roce_v2_cmq cmq;struct hns_roce_link_table tsq;struct hns_roce_link_table tpq;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 76/93 coresight: cpu-debug: Support for CA73 CPUs
In reply to Greg Kroah-Hartman[ Upstream commit a0f890aba2be33377f4eb24e13633c4a76a68f38 ]
This patch is to add the AMBA device ID for CA73 CPU, so that CPU debug module can be initialized successfully when a SoC contain CA73 CPUs.
This patch has been verified on 96boards Hikey960.
--- drivers/hwtracing/coresight/coresight-cpu-debug.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/hwtracing/coresight/coresight-cpu-debug.c +4 -0
@@ -668,6 +668,10 @@ static const struct amba_id debug_ids[] = { .id = 0x000bbd08, .mask = 0x000fffff, }, + { /* Debug for Cortex-A73 */ + .id = 0x000bbd09, + .mask = 0x000fffff, + }, { 0, 0 }, };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 77/93 PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
In reply to Greg Kroah-Hartman[ Upstream commit 85b0cae89d5266e6a7abb2e83c6f716326fc494c ]
Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is connected to an Alpine Ridge Thunderbolt controller. This port has slot implemented bit set in the config space but other than that it is not hotplug capable in the sense we are expecting in Linux (it has dev->is_hotplug_bridge set to 0):
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5
Bus: primary=00, secondary=05, subordinate=46, sec-latency=0 Memory behind bridge: 78000000-8fffffff [size=384M]
Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M]
...
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
...
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #8, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState+
This system is using ACPI based hotplug to notify the OS that it needs to rescan the PCI bus (ACPI hotplug).
If there is nothing connected in any of the Thunderbolt ports the root port will not have any runtime PM active children and is thus automatically runtime suspended pretty soon after boot by PCI PM core. Now, when a device is connected the BIOS SMI handler responsible for enumerating newly added devices is not able to find anything because the port is in D3.
Prevent this from happening by blacklisting PCI power management of this particular Gigabyte system.
--- drivers/pci/pci.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/pci/pci.c +22 -0
@@ -2501,6 +2501,25 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev)pm_runtime_put_sync (parent); } +static const struct dmi_system_id bridge_d3_blacklist[] = { +#ifdef CONFIG_X86 + { +/* +* Gigabyte X299 root port is not marked as hotplug capable +* which allows Linux to power manage it. However, this +* confuses the BIOS SMI handler so don't power manage root +* ports on that system. +*/ + .ident ="X299 DESIGNARE EX-CF" , + .matches = { +DMI_MATCH (DMI_BOARD_VENDOR ,"Gigabyte Technology Co., Ltd." ), +DMI_MATCH (DMI_BOARD_NAME ,"X299 DESIGNARE EX-CF" ), + }, + }, +#endif + { } +}; +/** * pci_bridge_d3_possible - Is it possible to put the bridge into D3 * @bridge: Bridge to check
@@ -2546,6 +2565,9 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)if (bridge->is_hotplug_bridge)return false; +if (dmi_check_system (bridge_d3_blacklist)) +return false; +/* * It should be safe to put PCIe ports from 2015 or newer * to D3.
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 78/93 PCI/ASPM: Save LTR Capability for suspend/resume
In reply to Greg Kroah-Hartman[ Upstream commit dbbfadf2319005cf528b0f15f12a05d4e4644303 ]
Latency Tolerance Reporting (LTR) allows Endpoints and Switch Upstream Ports to report their latency requirements to upstream components. If ASPM L1 PM substates are enabled, the LTR information helps determine when a Link enters L1.2 [1].
Software must set the maximum latency values in the LTR Capability based on characteristics of the platform, then set LTR Mechanism Enable in the Device Control 2 register in the PCIe Capability. The device can then use LTR to report its latency tolerance.
If the device reports a maximum latency value of zero, that means the device requires the highest possible performance and the ASPM L1.2 substate is effectively disabled.
We put devices in D3 for suspend, and we assume their internal state is lost. On resume, previously we did not restore the LTR Capability, but we did restore the LTR Mechanism Enable bit, so devices would request the highest possible performance and ASPM L1.2 wouldn't be used.
[1] PCIe r4.0, sec 5.5.1
--- drivers/pci/pci.c | 53 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-)
drivers/pci/pci.c +51 -2
@@ -1233,7 +1233,6 @@ static void pci_restore_pcie_state(struct pci_dev *dev)pcie_capability_write_word (dev,PCI_EXP_SLTCTL2 , cap[i++]); } -static int pci_save_pcix_state (struct pci_dev *dev) {int pos;
@@ -1270,6 +1269,45 @@ static void pci_restore_pcix_state(struct pci_dev *dev)pci_write_config_word (dev, pos +PCI_X_CMD , cap[i++]); } +static void pci_save_ltr_state (struct pci_dev *dev) +{ +int ltr; +struct pci_cap_saved_state *save_state; +u16 *cap; + +if (!pci_is_pcie (dev)) +return ; + + ltr =pci_find_ext_capability (dev,PCI_EXT_CAP_ID_LTR ); +if (!ltr) +return ; + + save_state =pci_find_saved_ext_cap (dev,PCI_EXT_CAP_ID_LTR ); +if (!save_state) { +pci_err (dev,"no suspend buffer for LTR; ASPM issues possible after resume\n" ); +return ; + } + + cap = (u16 *)&save_state->cap.data[0 ]; +pci_read_config_word (dev, ltr +PCI_LTR_MAX_SNOOP_LAT , cap++); +pci_read_config_word (dev, ltr +PCI_LTR_MAX_NOSNOOP_LAT , cap++); +} + +static void pci_restore_ltr_state (struct pci_dev *dev) +{ +struct pci_cap_saved_state *save_state; +int ltr; +u16 *cap; + + save_state =pci_find_saved_ext_cap (dev,PCI_EXT_CAP_ID_LTR ); + ltr =pci_find_ext_capability (dev,PCI_EXT_CAP_ID_LTR ); +if (!save_state || !ltr) +return ; + + cap = (u16 *)&save_state->cap.data[0 ]; +pci_write_config_word (dev, ltr +PCI_LTR_MAX_SNOOP_LAT , *cap++); +pci_write_config_word (dev, ltr +PCI_LTR_MAX_NOSNOOP_LAT , *cap++); +}/** * pci_save_state - save the PCI configuration space of a device before suspending
@@ -1291,6 +1329,7 @@ int pci_save_state(struct pci_dev *dev)if (i !=0 )return i; +pci_save_ltr_state (dev);pci_save_dpc_state (dev);return pci_save_vc_state (dev); }
@@ -1390,7 +1429,12 @@ void pci_restore_state(struct pci_dev *dev)if (!dev->state_saved)return ; -/* PCI Express register must be restored first */ +/* +* Restore max latencies (in the LTR capability) before enabling +* LTR itself (in the PCIe capability). +*/ +pci_restore_ltr_state (dev); +pci_restore_pcie_state (dev);pci_restore_pasid_state (dev);pci_restore_pri_state (dev);
@@ -3020,6 +3064,11 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)if (error)pci_err (dev,"unable to preallocate PCI-X save buffer\n" ); + error =pci_add_ext_cap_save_buffer (dev,PCI_EXT_CAP_ID_LTR , +2 *sizeof (u16)); +if (error) +pci_err (dev,"unable to allocate suspend buffer for LTR\n" ); +pci_allocate_vc_save_buffers (dev); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 79/93 f2fs: sync filesystem after roll-forward recovery
In reply to Greg Kroah-Hartman[ Upstream commit 812a95977fd2f0d1f220c716a98a7f22e22f488d ]
Some works after roll-forward recovery can get an error which will release all the data structures. Let's flush them in order to make it clean.
One possible corruption came from:
[ 90.400500] list_del corruption. prev->next should be ffffffed1f566208, but was (null) [ 90.675349] Call trace: [ 90.677869] __list_del_entry_valid+0x94/0xb4 [ 90.682351] remove_dirty_inode+0xac/0x114 [ 90.686563] __f2fs_write_data_pages+0x6a8/0x6c8 [ 90.691302] f2fs_write_data_pages+0x40/0x4c [ 90.695695] do_writepages+0x80/0xf0 [ 90.699372] __writeback_single_inode+0xdc/0x4ac [ 90.704113] writeback_sb_inodes+0x280/0x440 [ 90.708501] wb_writeback+0x1b8/0x3d0 [ 90.712267] wb_workfn+0x1a8/0x4d4 [ 90.715765] process_one_work+0x1c0/0x3d4 [ 90.719883] worker_thread+0x224/0x344 [ 90.723739] kthread+0x120/0x130 [ 90.727055] ret_from_fork+0x10/0x18
--- fs/f2fs/checkpoint.c | 5 +++-- fs/f2fs/node.c | 4 +++- fs/f2fs/super.c | 44 +++++++++++++++++++++++++++++++++----------- 3 files changed, 39 insertions(+), 14 deletions(-)
fs/f2fs/checkpoint.c +3 -2
@@ -306,8 +306,9 @@ static int f2fs_write_meta_pages(struct address_space *mapping, goto skip_write;/* collect a number of dirty meta pages and write together */ -if (wbc->for_kupdate || -get_pages (sbi,F2FS_DIRTY_META ) <nr_pages_to_skip (sbi,META )) +if (wbc->sync_mode !=WB_SYNC_ALL && +get_pages (sbi,F2FS_DIRTY_META ) < +nr_pages_to_skip (sbi,META )) goto skip_write;/* if locked failed, cp will flush dirty pages instead */
fs/f2fs/node.c +3 -1
@@ -1920,7 +1920,9 @@ static int f2fs_write_node_pages(struct address_space *mapping,f2fs_balance_fs_bg (sbi);/* collect a number of dirty node pages and write together */ -if (get_pages (sbi,F2FS_DIRTY_NODES ) <nr_pages_to_skip (sbi,NODE )) +if (wbc->sync_mode !=WB_SYNC_ALL && +get_pages (sbi,F2FS_DIRTY_NODES ) < +nr_pages_to_skip (sbi,NODE )) goto skip_write;if (wbc->sync_mode ==WB_SYNC_ALL )
fs/f2fs/super.c +33 -11
93 lines not on this page · raw message
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 80/93 drm/nouveau/volt/gf117: fix speedo readout register
In reply to Greg Kroah-Hartman[ Upstream commit fc782242749fa4235592854fafe1a1297583c1fb ]
GF117 appears to use the same register as GK104 (but still with the general Fermi readout mechanism).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
--- .../drm/nouveau/include/nvkm/subdev/volt.h | 1 + .../gpu/drm/nouveau/nvkm/engine/device/base.c | 2 +- .../gpu/drm/nouveau/nvkm/subdev/volt/Kbuild | 1 + .../gpu/drm/nouveau/nvkm/subdev/volt/gf117.c | 60 +++++++++++++++++++ 4 files changed, 63 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/nouveau/nvkm/subdev/volt/gf117.c
drivers/gpu/drm/nouveau/include/nvkm/subdev/volt.h +1 -0
@@ -38,6 +38,7 @@ int nvkm_volt_set_id(struct nvkm_volt *, u8 id, u8 min_id, u8 temp,int nv40_volt_new (struct nvkm_device *,int ,struct nvkm_volt **);int gf100_volt_new (struct nvkm_device *,int ,struct nvkm_volt **); +int gf117_volt_new (struct nvkm_device *,int ,struct nvkm_volt **);int gk104_volt_new (struct nvkm_device *,int ,struct nvkm_volt **);int gk20a_volt_new (struct nvkm_device *,int ,struct nvkm_volt **);int gm20b_volt_new (struct nvkm_device *,int ,struct nvkm_volt **);
drivers/gpu/drm/nouveau/nvkm/engine/device/base.c +1 -1
@@ -1613,7 +1613,7 @@ nvd7_chipset = { .pci = gf106_pci_new, .therm = gf119_therm_new, .timer = nv41_timer_new, - .volt = gf100_volt_new, + .volt = gf117_volt_new, .ce[0] = gf100_ce_new, .disp = gf119_disp_new, .dma = gf119_dma_new,
drivers/gpu/drm/nouveau/nvkm/subdev/volt/Kbuild +1 -0
@@ -2,6 +2,7 @@ nvkm-y += nvkm/subdev/volt/base.o nvkm-y += nvkm/subdev/volt/gpio.o nvkm-y += nvkm/subdev/volt/nv40.o nvkm-y += nvkm/subdev/volt/gf100.o +nvkm-y += nvkm/subdev/volt/gf117.o nvkm-y += nvkm/subdev/volt/gk104.o nvkm-y += nvkm/subdev/volt/gk20a.o nvkm-y += nvkm/subdev/volt/gm20b.o
drivers/gpu/drm/nouveau/nvkm/subdev/volt/gf117.c new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 81/93 platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
In reply to Greg Kroah-Hartman[ Upstream commit 238f9c11351f8af8534ae0318b4d9acc77b09ee8 ]
On some platforms such as HP Elite-x2-1013-g3, the platform BIOS enforces XTAL to remain off before S0ix state can be achieved. This may not be optimum when we want to enable use cases like Low Power Audio, Wake on Voice etc which always need 24mhz clock.
This introduces a new quirk to allow S0ix entry when all other conditions except for XTAL clock are good on a given platform. The extra power consumed by XTAL clock is about 2mw but it saves much more platform power compared to the system that remains in just PC10.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201579
--- drivers/platform/x86/intel_pmc_core.c | 34 +++++++++++++++++++++++++++ drivers/platform/x86/intel_pmc_core.h | 5 ++++ 2 files changed, 39 insertions(+)
drivers/platform/x86/intel_pmc_core.c +34 -0
@@ -15,6 +15,7 @@#include <linux/bitfield.h> #include <linux/debugfs.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/io.h> #include <linux/module.h> #include <linux/pci.h>
@@ -139,6 +140,7 @@ static const struct pmc_reg_map spt_reg_map = { .pm_cfg_offset = SPT_PMC_PM_CFG_OFFSET, .pm_read_disable_bit = SPT_PMC_READ_DISABLE_BIT, .ltr_ignore_max = SPT_NUM_IP_IGN_ALLOWED, + .pm_vric1_offset = SPT_PMC_VRIC1_OFFSET, };/* Cannonlake: PGD PFET Enable Ack Status Register(s) bitmap */
@@ -751,6 +753,37 @@ static const struct pci_device_id pmc_pci_ids[] = { { 0, }, }; +/* +* This quirk can be used on those platforms where +* the platform BIOS enforces 24Mhx Crystal to shutdown +* before PMC can assert SLP_S0#. +*/ +int quirk_xtal_ignore (const struct dmi_system_id *id) +{ +struct pmc_dev *pmcdev = &pmc; +u32 value; + + value =pmc_core_reg_read (pmcdev, pmcdev->map->pm_vric1_offset); +/* 24MHz Crystal Shutdown Qualification Disable */ + value |=SPT_PMC_VRIC1_XTALSDQDIS ; +/* Low Voltage Mode Enable */ + value &= ~SPT_PMC_VRIC1_SLPS0LVEN ; +pmc_core_reg_write (pmcdev, pmcdev->map->pm_vric1_offset, value); +return 0 ; +} + +static const struct dmi_system_id pmc_core_dmi_table[] = { + { + .callback = quirk_xtal_ignore, + .ident ="HP Elite x2 1013 G3" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"HP" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"HP Elite x2 1013 G3" ), + }, + }, + {} +}; +static int __init pmc_core_probe (void ) {struct pmc_dev *pmcdev = &pmc;
@@ -792,6 +825,7 @@ static int __init pmc_core_probe(void)return err; } +dmi_check_system (pmc_core_dmi_table);pr_info (" initialized\n" );return 0 ; }
drivers/platform/x86/intel_pmc_core.h +5 -0
@@ -25,6 +25,7 @@#define SPT_PMC_MTPMC_OFFSET 0x20#define SPT_PMC_MFPMC_OFFSET 0x38#define SPT_PMC_LTR_IGNORE_OFFSET 0x30C +#define SPT_PMC_VRIC1_OFFSET 0x31c#define SPT_PMC_MPHY_CORE_STS_0 0x1143#define SPT_PMC_MPHY_CORE_STS_1 0x1142#define SPT_PMC_MPHY_COM_STS_0 0x1155
@@ -135,6 +136,9 @@ enum ppfear_regs {#define SPT_PMC_BIT_MPHY_CMN_LANE2 BIT(2)#define SPT_PMC_BIT_MPHY_CMN_LANE3 BIT(3) +#define SPT_PMC_VRIC1_SLPS0LVEN BIT(13) +#define SPT_PMC_VRIC1_XTALSDQDIS BIT(22) +/* Cannonlake Power Management Controller register offsets */ #define CNP_PMC_SLPS0_DBG_OFFSET 0x10B4#define CNP_PMC_PM_CFG_OFFSET 0x1818
@@ -217,6 +221,7 @@ struct pmc_reg_map {const int pm_read_disable_bit;const u32 slps0_dbg_offset;const u32 ltr_ignore_max; +const u32 pm_vric1_offset; };/**
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 82/93 ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t
In reply to Greg Kroah-Hartman[ Upstream commit 143c2a89e0e5fda6c6fd08d7bc1126438c19ae90 ]
When running kprobe on -rt kernel, the below bug is caught:
|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931 |in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0 |Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140 |CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1 |Hardware name: Freescale LS1021A |[<8025a43c>] (___might_sleep) |[<80b5b324>] (rt_spin_lock) |[<80b5c31c>] (__patch_text_real) |[<80b5c3ac>] (patch_text_stop_machine) |[<802f2920>] (multi_cpu_stop)
Since patch_text_stop_machine() is called in stop_machine() which disables IRQ, sleepable lock should be not used in this atomic context,
so replace patch_lock to raw lock.
--- arch/arm/kernel/patch.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/kernel/patch.c +3 -3
@@ -16,7 +16,7 @@ struct patch {unsigned int insn; }; -static DEFINE_SPINLOCK (patch_lock); +static DEFINE_RAW_SPINLOCK (patch_lock);static void __kprobes *patch_map (void *addr,int fixmap,unsigned long *flags) __acquires(&patch_lock)
@@ -33,7 +33,7 @@ static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags)return addr;if (flags) -spin_lock_irqsave (&patch_lock, *flags); +raw_spin_lock_irqsave (&patch_lock, *flags);else __acquire (&patch_lock);
@@ -48,7 +48,7 @@ static void __kprobes patch_unmap(int fixmap, unsigned long *flags)clear_fixmap (fixmap);if (flags) -spin_unlock_irqrestore (&patch_lock, *flags); +raw_spin_unlock_irqrestore (&patch_lock, *flags);else __release (&patch_lock); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 83/93 drm/amdkfd: use init_mqd function to allocate object for hid_mqd (CI)
In reply to Greg Kroah-Hartman[ Upstream commit cac734c2dbd2514f14c8c6a17caba1990d83bf1d ]
if use the legacy method to allocate object, when mqd_hiq need to run uninit code, it will be cause WARNING call trace.
eg: (s3 suspend test)
[ 34.918944] Call Trace: [ 34.918948] [<ffffffff92961dc1>] dump_stack+0x19/0x1b [ 34.918950] [<ffffffff92297648>] __warn+0xd8/0x100 [ 34.918951] [<ffffffff9229778d>] warn_slowpath_null+0x1d/0x20 [ 34.918991] [<ffffffffc03ce1fe>] uninit_mqd_hiq_sdma+0x4e/0x50 [amdgpu] [ 34.919028] [<ffffffffc03d0ef7>] uninitialize+0x37/0xe0 [amdgpu] [ 34.919064] [<ffffffffc03d15a6>] kernel_queue_uninit+0x16/0x30 [amdgpu] [ 34.919086] [<ffffffffc03d26c2>] pm_uninit+0x12/0x20 [amdgpu] [ 34.919107] [<ffffffffc03d4915>] stop_nocpsch+0x15/0x20 [amdgpu] [ 34.919129] [<ffffffffc03c1dce>] kgd2kfd_suspend.part.4+0x2e/0x50 [amdgpu] [ 34.919150] [<ffffffffc03c2667>] kgd2kfd_suspend+0x17/0x20 [amdgpu] [ 34.919171] [<ffffffffc03c103a>] amdgpu_amdkfd_suspend+0x1a/0x20 [amdgpu] [ 34.919187] [<ffffffffc02ec428>] amdgpu_device_suspend+0x88/0x3a0 [amdgpu] [ 34.919189] [<ffffffff922e22cf>] ? enqueue_entity+0x2ef/0xbe0 [ 34.919205] [<ffffffffc02e8220>] amdgpu_pmops_suspend+0x20/0x30 [amdgpu] [ 34.919207] [<ffffffff925c56ff>] pci_pm_suspend+0x6f/0x150 [ 34.919208] [<ffffffff925c5690>] ? pci_pm_freeze+0xf0/0xf0 [ 34.919210] [<ffffffff926b45c6>] dpm_run_callback+0x46/0x90 [ 34.919212] [<ffffffff926b49db>] __device_suspend+0xfb/0x2a0 [ 34.919213] [<ffffffff926b4b9f>] async_suspend+0x1f/0xa0 [ 34.919214] [<ffffffff922c918f>] async_run_entry_fn+0x3f/0x130 [ 34.919216] [<ffffffff922b9d4f>] process_one_work+0x17f/0x440 [ 34.919217] [<ffffffff922bade6>] worker_thread+0x126/0x3c0 [ 34.919218] [<ffffffff922bacc0>] ? manage_workers.isra.25+0x2a0/0x2a0 [ 34.919220] [<ffffffff922c1c31>] kthread+0xd1/0xe0 [ 34.919221] [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40 [ 34.919222] [<ffffffff92974c1d>] ret_from_fork_nospec_begin+0x7/0x21 [ 34.919224] [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40 [ 34.919224] ---[ end trace 38cd9f65c963adad ]---
--- .../gpu/drm/amd/amdkfd/kfd_mqd_manager_cik.c | 52 +------------------ 1 file changed, 1 insertion(+), 51 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_cik.c +1 -51
@@ -323,57 +323,7 @@ static int init_mqd_hiq(struct mqd_manager *mm, void **mqd, struct kfd_mem_obj **mqd_mem_obj, uint64_t *gart_addr, struct queue_properties *q) { - uint64_t addr; -struct cik_mqd *m; -int retval; - - retval =kfd_gtt_sa_allocate (mm->dev,sizeof (struct cik_mqd ), - mqd_mem_obj); - -if (retval !=0 ) -return -ENOMEM ; - - m = (struct cik_mqd *) (*mqd_mem_obj)->cpu_ptr; - addr = (*mqd_mem_obj)->gpu_addr; - -memset (m,0 ,ALIGN (sizeof (struct cik_mqd ),256 )); - - m->header =0xC0310800 ; - m->compute_pipelinestat_enable =1 ; - m->compute_static_thread_mgmt_se0 =0xFFFFFFFF ; - m->compute_static_thread_mgmt_se1 =0xFFFFFFFF ; - m->compute_static_thread_mgmt_se2 =0xFFFFFFFF ; - m->compute_static_thread_mgmt_se3 =0xFFFFFFFF ; - - m->cp_hqd_persistent_state =DEFAULT_CP_HQD_PERSISTENT_STATE | -PRELOAD_REQ ; - m->cp_hqd_quantum =QUANTUM_EN |QUANTUM_SCALE_1MS | -QUANTUM_DURATION (10 ); - - m->cp_mqd_control =MQD_CONTROL_PRIV_STATE_EN ; - m->cp_mqd_base_addr_lo =lower_32_bits (addr); - m->cp_mqd_base_addr_hi =upper_32_bits (addr); - - m->cp_hqd_ib_control =DEFAULT_MIN_IB_AVAIL_SIZE ; - -/* -* Pipe Priority -* Identifies the pipe relative priority when this queue is connected -* to the pipeline. The pipe priority is against the GFX pipe and HP3D. -* In KFD we are using a fixed pipe priority set to CS_MEDIUM. -* 0 = CS_LOW (typically below GFX) -* 1 = CS_MEDIUM (typically between HP3D and GFX -* 2 = CS_HIGH (typically above HP3D) -*/ - m->cp_hqd_pipe_priority =1 ; - m->cp_hqd_queue_priority =15 ; - - *mqd = m; -if (gart_addr) - *gart_addr = addr; - retval = mm->update_mqd (mm, m, q); - -return retval; + return init_mqd(mm, mqd, mqd_mem_obj, gart_addr, q); } static int update_mqd_hiq(struct mqd_manager *mm, void *mqd,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 84/93 appletalk: Fix use-after-free in atalk_proc_exit
In reply to Greg Kroah-Hartman[ Upstream commit 6377f787aeb945cae7abbb6474798de129e1f3ac ]
KASAN report this:
BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806
CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667
atalk_proc_exit+0x18/0x820 [appletalk]
atalk_exit+0xf/0x5a [appletalk]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Allocated by task 2806:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
slab_post_alloc_hook mm/slab.h:444 [inline]
slab_alloc_node mm/slub.c:2739 [inline]
slab_alloc mm/slub.c:2747 [inline]
kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752
kmem_cache_zalloc include/linux/slab.h:730 [inline]
__proc_create+0x30f/0xa20 fs/proc/generic.c:408
proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469
0xffffffffc10c01bb
0xffffffffc10c0166
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 2806:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook mm/slub.c:1436 [inline]
slab_free mm/slub.c:2986 [inline]
kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002
pde_put+0x6e/0x80 fs/proc/generic.c:647
remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684
0xffffffffc10c031c
0xffffffffc10c0166
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8881f41fe500
which belongs to the cache proc_dir_entry of size 256
The buggy address is located 176 bytes inside of
256-byte region [ffff8881f41fe500, ffff8881f41fe600)
The buggy address belongs to the page:
page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fbIt should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init
--- include/linux/atalk.h | 2 +- net/appletalk/atalk_proc.c | 2 +- net/appletalk/ddp.c | 37 ++++++++++++++++++++++++++------ net/appletalk/sysctl_net_atalk.c | 5 ++++- 4 files changed, 37 insertions(+), 9 deletions(-)
include/linux/atalk.h +1 -1
@@ -158,7 +158,7 @@ extern int sysctl_aarp_retransmit_limit;extern int sysctl_aarp_resolve_time;#ifdef CONFIG_SYSCTL -extern void atalk_register_sysctl (void ); +extern int atalk_register_sysctl (void );extern void atalk_unregister_sysctl (void );#else static inline int atalk_register_sysctl (void )
net/appletalk/atalk_proc.c +1 -1
@@ -255,7 +255,7 @@ int __init atalk_proc_init(void) goto out; } -void __exit atalk_proc_exit(void) +void atalk_proc_exit (void ) {remove_proc_entry ("interface" , atalk_proc_dir);remove_proc_entry ("route" , atalk_proc_dir);
net/appletalk/ddp.c +31 -6
@@ -1910,12 +1910,16 @@ static const char atalk_err_snap[] __initconst =/* Called by proto.c on kernel start up */ static int __init atalk_init (void ) { -int rc =proto_register (&ddp_proto,0 ); +int rc; -if (rc !=0 ) + rc =proto_register (&ddp_proto,0 ); +if (rc) goto out; - (void )sock_register (&atalk_family_ops); + rc =sock_register (&atalk_family_ops); +if (rc) + goto out_proto; + ddp_dl =register_snap_client (ddp_snap_id, atalk_rcv);if (!ddp_dl)printk (atalk_err_snap);
@@ -1923,12 +1927,33 @@ static int __init atalk_init(void)dev_add_pack (<alk_packet_type);dev_add_pack (&ppptalk_packet_type); -register_netdevice_notifier (&ddp_notifier); + rc =register_netdevice_notifier (&ddp_notifier); +if (rc) + goto out_sock; +aarp_proto_init (); -atalk_proc_init (); -atalk_register_sysctl (); + rc =atalk_proc_init (); +if (rc) + goto out_aarp; + + rc =atalk_register_sysctl (); +if (rc) + goto out_proc; out:return rc; +out_proc: +atalk_proc_exit (); +out_aarp: +aarp_cleanup_module (); +unregister_netdevice_notifier (&ddp_notifier); +out_sock: +dev_remove_pack (&ppptalk_packet_type); +dev_remove_pack (<alk_packet_type); +unregister_snap_client (ddp_dl); +sock_unregister (PF_APPLETALK ); +out_proto: +proto_unregister (&ddp_proto); + goto out; }module_init (atalk_init);
net/appletalk/sysctl_net_atalk.c +4 -1
@@ -45,9 +45,12 @@ static struct ctl_table atalk_table[] = {static struct ctl_table_header *atalk_table_header; -void atalk_register_sysctl (void ) +int __init atalk_register_sysctl (void ) { atalk_table_header =register_net_sysctl (&init_net,"net/appletalk" , atalk_table); +if (!atalk_table_header) +return -ENOMEM ; +return 0 ; }void atalk_unregister_sysctl (void )
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 85/93 cifs: return -ENODATA when deleting an xattr that does not exist
In reply to Greg Kroah-Hartman[ Upstream commit 2109464184919f81efd593b4008291448c522815 ]
BUGZILLA: https://bugzilla.kernel.org/show_bug.cgi?id=202007
When deleting an xattr/EA:
SMB2/3 servers will return SUCCESS when clients delete non-existing EAs. This means that we need to first QUERY the server and check if the EA exists or not so that we can return -ENODATA correctly when this happens.
--- fs/cifs/smb2ops.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
fs/cifs/smb2ops.c +10 -0
@@ -949,6 +949,16 @@ smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, resp_buftype[0 ] = resp_buftype[1 ] = resp_buftype[2 ] =CIFS_NO_BUFFER ;memset (rsp_iov,0 ,sizeof (rsp_iov)); +if (ses->server->ops->query_all_EAs) { +if (!ea_value) { + rc = ses->server->ops->query_all_EAs (xid, tcon, path, + ea_name,NULL ,0 , + cifs_sb); +if (rc == -ENODATA ) + goto sea_exit; + } + } +/* Open */ memset (&open_iov,0 ,sizeof (open_iov)); rqst[0 ].rq_iov = open_iov;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 86/93 lib/div64.c: off by one in shift
In reply to Greg Kroah-Hartman[ Upstream commit cdc94a37493135e355dfc0b0e086d84e3eadb50d ]
fls counts bits starting from 1 to 32 (returns 0 for zero argument). If we add 1 we shift right one bit more and loose precision from divisor, what cause function incorect results with some numbers.
Corrected code was tested in user-space, see bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202391
--- lib/div64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
lib/div64.c +2 -2
@@ -109,7 +109,7 @@ u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) quot =div_u64_rem (dividend, divisor, &rem32); *remainder = rem32; }else { -int n =1 +fls (high); +int n =fls (high); quot =div_u64 (dividend >> n, divisor >> n);if (quot !=0 )
@@ -147,7 +147,7 @@ u64 div64_u64(u64 dividend, u64 divisor)if (high ==0 ) { quot =div_u64 (dividend, divisor); }else { -int n =1 +fls (high); +int n =fls (high); quot =div_u64 (dividend >> n, divisor >> n);if (quot !=0 )
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 87/93 rxrpc: Fix client call connect/disconnect race
In reply to Greg Kroah-Hartman[ Upstream commit 930c9f9125c85b5134b3e711bc252ecc094708e3 ]
rxrpc_disconnect_client_call() reads the call's connection ID protocol value (call->cid) as part of that function's variable declarations. This is bad because it's not inside the locked section and so may race with someone granting use of the channel to the call.
This manifests as an assertion failure (see below) where the call in the presumed channel (0 because call->cid wasn't set when we read it) doesn't match the call attached to the channel we were actually granted (if 1, 2 or 3).
Fix this by moving the read and dependent calculations inside of the channel_lock section. Also, only set the channel number and pointer variables if cid is not zero (ie. unset).
This problem can be induced by injecting an occasional error in rxrpc_wait_for_channel() before the call to schedule().
Make two further changes also:
(1) Add a trace for wait failure in rxrpc_connect_call().
(2) Drop channel_lock before BUG'ing in the case of the assertion failure.
The failure causes a trace akin to the following:
rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false
------------[ cut here ]------------ kernel BUG at net/rxrpc/conn_client.c:824! ... RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d ... Call Trace: rxrpc_connect_call+0x902/0x9b3 ? wake_up_q+0x54/0x54 rxrpc_new_client_call+0x3a0/0x751 ? rxrpc_kernel_begin_call+0x141/0x1bc ? afs_alloc_call+0x1b5/0x1b5 rxrpc_kernel_begin_call+0x141/0x1bc afs_make_call+0x20c/0x525 ? afs_alloc_call+0x1b5/0x1b5 ? __lock_is_held+0x40/0x71 ? lockdep_init_map+0xaf/0x193 ? lockdep_init_map+0xaf/0x193 ? __lock_is_held+0x40/0x71 ? yfs_fs_fetch_data+0x33b/0x34a yfs_fs_fetch_data+0x33b/0x34a afs_fetch_data+0xdc/0x3b7 afs_read_dir+0x52d/0x97f afs_dir_iterate+0xa0/0x661 ? iterate_dir+0x63/0x141 iterate_dir+0xa2/0x141 ksys_getdents64+0x9f/0x11b ? filldir+0x111/0x111 ? do_syscall_64+0x3e/0x1a0 __x64_sys_getdents64+0x16/0x19 do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe
--- include/trace/events/rxrpc.h | 2 ++ net/rxrpc/conn_client.c | 20 +++++++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-)
include/trace/events/rxrpc.h +2 -0
@@ -76,6 +76,7 @@ enum rxrpc_client_trace { rxrpc_client_chan_disconnect, rxrpc_client_chan_pass, rxrpc_client_chan_unstarted, + rxrpc_client_chan_wait_failed, rxrpc_client_cleanup, rxrpc_client_count, rxrpc_client_discard,
@@ -276,6 +277,7 @@ enum rxrpc_tx_point { EM(rxrpc_client_chan_disconnect, "ChDisc") \ EM(rxrpc_client_chan_pass, "ChPass") \ EM(rxrpc_client_chan_unstarted, "ChUnst") \ + EM(rxrpc_client_chan_wait_failed, "ChWtFl") \ EM(rxrpc_client_cleanup, "Clean ") \ EM(rxrpc_client_count, "Count ") \EM (rxrpc_client_discard,"Discar" ) \
net/rxrpc/conn_client.c +15 -5
@@ -704,6 +704,7 @@ int rxrpc_connect_call(struct rxrpc_sock *rx, ret =rxrpc_wait_for_channel (call, gfp);if (ret <0 ) { +trace_rxrpc_client (call->conn, ret, rxrpc_client_chan_wait_failed);rxrpc_disconnect_client_call (call); goto out; }
@@ -774,16 +775,22 @@ static void rxrpc_set_client_reap_timer(struct rxrpc_net *rxnet)*/ void rxrpc_disconnect_client_call (struct rxrpc_call *call) { -unsigned int channel = call->cid &RXRPC_CHANNELMASK ;struct rxrpc_connection *conn = call->conn; -struct rxrpc_channel *chan = &conn->channels[channel]; +struct rxrpc_channel *chan =NULL ;struct rxrpc_net *rxnet = conn->params.local->rxnet; +unsigned int channel =-1 ; +u32 cid; +spin_lock (&conn->channel_lock); + + cid = call->cid; +if (cid) { + channel = cid &RXRPC_CHANNELMASK ; + chan = &conn->channels[channel]; + }trace_rxrpc_client (conn, channel, rxrpc_client_chan_disconnect); call->conn =NULL ; -spin_lock (&conn->channel_lock); -/* Calls that have never actually been assigned a channel can simply be * discarded. If the conn didn't get used either, it will follow * immediately unless someone else grabs it in the meantime.
@@ -807,7 +814,10 @@ void rxrpc_disconnect_client_call(struct rxrpc_call *call) goto out; } - ASSERTCMP(rcu_access_pointer(chan->call), ==, call); +if (rcu_access_pointer (chan->call) != call) { +spin_unlock (&conn->channel_lock); +BUG (); + }/* If a client call was exposed to the world, we save the result for * retransmission.
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 88/93 f2fs: fix to dirty inode for i_mode recovery
In reply to Greg Kroah-Hartman[ Upstream commit ca597bddedd94906cd761d8be6a3ad21292725de ]
As Seulbae Kim reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202637
We didn't recover permission field correctly after sudden power-cut, the reason is in setattr we didn't add inode into global dirty list once i_mode is changed, so latter checkpoint triggered by fsync will not flush last i_mode into disk, result in this problem, fix it.
--- fs/f2fs/file.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
fs/f2fs/file.c +1 -4
@@ -768,7 +768,6 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr) {struct inode *inode =d_inode (dentry);int err; -bool size_changed = false;if (unlikely (f2fs_cp_error (F2FS_I_SB (inode))))return -EIO ;
@@ -843,8 +842,6 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr)down_write (&F2FS_I (inode)->i_sem);F2FS_I (inode)->last_disk_size =i_size_read (inode);up_write (&F2FS_I (inode)->i_sem); - - size_changed = true; }__setattr_copy (inode, attr);
@@ -858,7 +855,7 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr) }/* file size may changed here */ -f2fs_mark_inode_dirty_sync (inode, size_changed); +f2fs_mark_inode_dirty_sync (inode, true);/* inode change will produce dirty node pages flushed by checkpoint */ f2fs_balance_fs (F2FS_I_SB (inode), true);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 89/93 f2fs: fix to use kvfree instead of kzfree
In reply to Greg Kroah-Hartman[ Upstream commit 2a6a7e722e7a78d774ce02b847c5b183a3ff2672 ]
As Jiqun Li reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202747
System can panic due to using wrong allocate/free function pair in xattr interface:
- use kvmalloc to allocate memory
- use kzfree to free memory
Let's fix to use kvfree instead of kzfree, BTW, we are safe to get rid of kzfree, since there is no such confidential data stored as xattr, we don't need to zero it before free memory.
--- fs/f2fs/xattr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
fs/f2fs/xattr.c +5 -5
@@ -347,7 +347,7 @@ static int lookup_all_xattrs(struct inode *inode, struct page *ipage, *base_addr = txattr_addr;return 0 ; out: -kzfree (txattr_addr); +kvfree (txattr_addr);return err; }
@@ -390,7 +390,7 @@ static int read_all_xattrs(struct inode *inode, struct page *ipage, *base_addr = txattr_addr;return 0 ; fail: -kzfree (txattr_addr); +kvfree (txattr_addr);return err; }
@@ -517,7 +517,7 @@ int f2fs_getxattr(struct inode *inode, int index, const char *name, } error = size; out: -kzfree (base_addr); +kvfree (base_addr);return error; }
@@ -563,7 +563,7 @@ ssize_t f2fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size) } error = buffer_size - rest; cleanup: -kzfree (base_addr); +kvfree (base_addr);return error; }
@@ -694,7 +694,7 @@ static int __f2fs_setxattr(struct inode *inode, int index,if (!error &&S_ISDIR (inode->i_mode))set_sbi_flag (F2FS_I_SB (inode),SBI_NEED_CP ); exit: -kzfree (base_addr); +kvfree (base_addr);return error; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 90/93 f2fs: fix to add refcount once page is tagged PG_private
In reply to Greg Kroah-Hartman[ Upstream commit 240a59156d9bcfabceddb66be449e7b32fb5dc4a ]
As Gao Xiang reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202749
f2fs may skip pageout() due to incorrect page reference count.
The problem here is that MM defined the rule [1] very clearly that once page was set with PG_private flag, we should increment the refcount in that page, also main flows like pageout(), migrate_page() will assume there is one additional page reference count if page_has_private() returns true.
But currently, f2fs won't add/del refcount when changing PG_private flag. Anyway, f2fs should follow MM's rule to make MM's related flows running as expected.
[1] https://lore.kernel.org/lkml/[email protected]/
--- fs/f2fs/checkpoint.c | 4 ++-- fs/f2fs/data.c | 21 ++++++++------------- fs/f2fs/dir.c | 2 +- fs/f2fs/f2fs.h | 21 +++++++++++++++++++++ fs/f2fs/node.c | 2 +- fs/f2fs/segment.c | 9 +++------ 6 files changed, 36 insertions(+), 23 deletions(-)
fs/f2fs/checkpoint.c +2 -2
@@ -406,7 +406,7 @@ static int f2fs_set_meta_page_dirty(struct page *page)if (!PageDirty (page)) {__set_page_dirty_nobuffers (page);inc_page_count (F2FS_P_SB (page),F2FS_DIRTY_META ); -SetPagePrivate (page); +f2fs_set_page_private (page,0 );f2fs_trace_pid (page);return 1 ; }
@@ -957,7 +957,7 @@ void f2fs_update_dirty_page(struct inode *inode, struct page *page)inode_inc_dirty_pages (inode);spin_unlock (&sbi->inode_lock[type]); -SetPagePrivate (page); +f2fs_set_page_private (page,0 );f2fs_trace_pid (page); }
fs/f2fs/data.c +8 -13
@@ -2711,8 +2711,7 @@ void f2fs_invalidate_page(struct page *page, unsigned int offset,if (IS_ATOMIC_WRITTEN_PAGE (page))return f2fs_drop_inmem_page (inode, page); -set_page_private (page,0 ); -ClearPagePrivate (page); +f2fs_clear_page_private (page); }int f2fs_release_page (struct page *page,gfp_t wait)
@@ -2726,8 +2725,7 @@ int f2fs_release_page(struct page *page, gfp_t wait)return 0 ;clear_cold_data (page); -set_page_private (page,0 ); -ClearPagePrivate (page); +f2fs_clear_page_private (page);return 1 ; }
@@ -2795,12 +2793,8 @@ int f2fs_migrate_page(struct address_space *mapping,return -EAGAIN ; } -/* -* A reference is expected if PagePrivate set when move mapping, -* however F2FS breaks this for maintaining dirty page counts when -* truncating pages. So here adjusting the 'extra_count' make it work. -*/ - extra_count = (atomic_written ?1 :0 ) -page_has_private (page); +/* one extra reference was held for atomic_write page */ + extra_count = atomic_written ?1 :0 ; rc =migrate_page_move_mapping (mapping, newpage, page, mode, extra_count);if (rc !=MIGRATEPAGE_SUCCESS ) {
@@ -2821,9 +2815,10 @@ int f2fs_migrate_page(struct address_space *mapping,get_page (newpage); } -if (PagePrivate (page)) -SetPagePrivate (newpage); -set_page_private (newpage,page_private (page)); +if (PagePrivate (page)) { +f2fs_set_page_private (newpage,page_private (page)); +f2fs_clear_page_private (page); + }if (mode !=MIGRATE_SYNC_NO_COPY )migrate_page_copy (newpage, page);
fs/f2fs/dir.c +1 -1
@@ -728,7 +728,7 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page, !f2fs_truncate_hole(dir, page->index, page->index + 1)) {f2fs_clear_page_cache_dirty_tag (page);clear_page_dirty_for_io (page); -ClearPagePrivate (page); +f2fs_clear_page_private (page);ClearPageUptodate (page);clear_cold_data (page);inode_dec_dirty_pages (dir);
fs/f2fs/f2fs.h +21 -0
@@ -2825,6 +2825,27 @@ static inline bool is_valid_data_blkaddr(struct f2fs_sb_info *sbi,return true; } +static inline void f2fs_set_page_private (struct page *page, +unsigned long data) +{ +if (PagePrivate (page)) +return ; + +get_page (page); +SetPagePrivate (page); +set_page_private (page, data); +} + +static inline void f2fs_clear_page_private (struct page *page) +{ +if (!PagePrivate (page)) +return ; + +set_page_private (page,0 ); +ClearPagePrivate (page); +f2fs_put_page (page,0 ); +} +/* * file.c */
fs/f2fs/node.c +1 -1
@@ -1961,7 +1961,7 @@ static int f2fs_set_node_page_dirty(struct page *page)if (!PageDirty (page)) {__set_page_dirty_nobuffers (page);inc_page_count (F2FS_P_SB (page),F2FS_DIRTY_NODES ); -SetPagePrivate (page); +f2fs_set_page_private (page,0 );f2fs_trace_pid (page);return 1 ; }
fs/f2fs/segment.c +3 -6
@@ -191,8 +191,7 @@ void f2fs_register_inmem_page(struct inode *inode, struct page *page)f2fs_trace_pid (page); -set_page_private (page, (unsigned long )ATOMIC_WRITTEN_PAGE ); -SetPagePrivate (page); +f2fs_set_page_private (page, (unsigned long )ATOMIC_WRITTEN_PAGE ); new =f2fs_kmem_cache_alloc (inmem_entry_slab,GFP_NOFS );
@@ -280,8 +279,7 @@ static int __revoke_inmem_pages(struct inode *inode,ClearPageUptodate (page);clear_cold_data (page); } -set_page_private (page,0 ); -ClearPagePrivate (page); +f2fs_clear_page_private (page);f2fs_put_page (page,1 );list_del (&cur->list);
@@ -370,8 +368,7 @@ void f2fs_drop_inmem_page(struct inode *inode, struct page *page)kmem_cache_free (inmem_entry_slab, cur);ClearPageUptodate (page); -set_page_private (page,0 ); -ClearPagePrivate (page); +f2fs_clear_page_private (page);f2fs_put_page (page,0 );trace_f2fs_commit_inmem_page (page,INMEM_INVALIDATE );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 91/93 include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
In reply to Greg Kroah-Hartman[ Upstream commit a4046c06be50a4f01d435aa7fe57514818e6cc82 ]
Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang:
UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18
--- include/linux/swap.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/swap.h +2 -2
@@ -157,9 +157,9 @@ struct swap_extent {/* * Max bad pages in the new format.. */ -#define __swapoffset (x) ((unsigned long)&((union swap_header *)0)->x)#define MAX_SWAP_BADPAGES \ - ((__swapoffset(magic.magic) - __swapoffset(info.badpages)) / sizeof(int)) + ((offsetof(union swap_header, magic.magic) - \ + offsetof(union swap_header, info.badpages)) / sizeof(int))enum {SWP_USED = (1 <<0 ),/* is slot in swap_info[] used? */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 92/93 bpf: fix use after free in bpf_evict_inode
In reply to Greg Kroah-Hartman[ Upstream commit 1da6c4d9140cb7c13e87667dc4e1488d6c8fc10f ]
syzkaller was able to generate the following UAF in bpf:
BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline]
BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423
CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+
#110
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
lookup_last fs/namei.c:2269 [inline]
path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
filename_lookup+0x26a/0x520 fs/namei.c:2348
user_path_at_empty+0x40/0x50 fs/namei.c:2608
user_path include/linux/namei.h:62 [inline]
do_mount+0x180/0x1ff0 fs/namespace.c:2980
ksys_mount+0x12d/0x140 fs/namespace.c:3258
__do_sys_mount fs/namespace.c:3272 [inline]
__se_sys_mount fs/namespace.c:3269 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3269
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457569
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569
RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000
RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000
R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4
R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff
Allocated by task 9424:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc mm/slab.c:3722 [inline]
__kmalloc_track_caller+0x157/0x760 mm/slab.c:3737
kstrdup+0x39/0x70 mm/util.c:49
bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356
vfs_symlink+0x37a/0x5d0 fs/namei.c:4127
do_symlinkat+0x242/0x2d0 fs/namei.c:4154
__do_sys_symlink fs/namei.c:4173 [inline]
__se_sys_symlink fs/namei.c:4171 [inline]
__x64_sys_symlink+0x59/0x80 fs/namei.c:4171
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9425:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3817
bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565
evict+0x4b9/0x980 fs/inode.c:558
iput_final fs/inode.c:1550 [inline]
iput+0x674/0xa90 fs/inode.c:1576
do_unlinkat+0x733/0xa30 fs/namei.c:4069
__do_sys_unlink fs/namei.c:4110 [inline]
__se_sys_unlink fs/namei.c:4108 [inline]
__x64_sys_unlink+0x42/0x50 fs/namei.c:4108
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbeIn this scenario path lookup under RCU is racing with the final unlink in case of symlinks. As Linus puts it in his analysis:
[...] We actually RCU-delay the inode freeing itself, but when we do the final iput(), the "evict()" function is called synchronously. Now, the simple fix would seem to just RCU-delay the kfree() of the symlink data in bpf_evict_inode(). Maybe that's the right thing to do. [...]
Al suggested to piggy-back on the ->destroy_inode() callback in order to implement RCU deferral there which can then kfree() the inode->i_link eventually right before putting inode back into inode cache. By reusing free_inode_nonrcu() from there we can avoid the need for our own inode cache and just reuse generic one as we currently do.
And in-fact on top of all this we should just get rid of the bpf_evict_inode() entirely. This means truncate_inode_pages_final() and clear_inode() will then simply be called by the fs core via evict(). Dropping the reference should really only be done when inode is unhashed and nothing reachable anymore, so it's better also moved into the final ->destroy_inode() callback.
--- kernel/bpf/inode.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-)
kernel/bpf/inode.c +18 -14
@@ -554,19 +554,6 @@ struct bpf_prog *bpf_prog_get_type_path( }EXPORT_SYMBOL (bpf_prog_get_type_path); -static void bpf_evict_inode (struct inode *inode) -{ -enum bpf_type type; - -truncate_inode_pages_final (&inode->i_data); -clear_inode (inode); - -if (S_ISLNK (inode->i_mode)) -kfree (inode->i_link); -if (!bpf_inode_type (inode, &type)) -bpf_any_put (inode->i_private, type); -} -/* * Display the mount options in /proc/mounts. */
@@ -579,11 +566,28 @@ static int bpf_show_options(struct seq_freturn 0 ; } +static void bpf_destroy_inode_deferred (struct rcu_head *head) +{ + struct inode *inode = container_of(head, struct inode, i_rcu); +enum bpf_type type; + +if (S_ISLNK (inode->i_mode)) +kfree (inode->i_link); +if (!bpf_inode_type (inode, &type)) +bpf_any_put (inode->i_private, type); +free_inode_nonrcu (inode); +} + +static void bpf_destroy_inode (struct inode *inode) +{ +call_rcu (&inode->i_rcu, bpf_destroy_inode_deferred); +} +static const struct super_operations bpf_super_ops = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, .show_options = bpf_show_options, - .evict_inode = bpf_evict_inode, + .destroy_inode = bpf_destroy_inode, };enum {
Greg Kroah-Hartman
maintainerPATCH 93/93 IB/hfi1: Failed to drain send queue when QP is put into error state
In reply to Greg Kroah-HartmanFrom: Kaike Wan <[email protected]>
commit 662d66466637862ef955f7f6e78a286d8cf0ebef upstream.
When a QP is put into error state, all pending requests in the send work queue should be drained. The following sequence of events could lead to a failure, causing a request to hang:
(1) The QP builds a packet and tries to send through SDMA engine. However, PIO engine is still busy. Consequently, this packet is put on the QP's tx list and the QP is put on the PIO waiting list. The field qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN;
(2) The QP is put into error state by the user application and notify_error_qp() is called, which removes the QP from the PIO waiting list and the packet from the QP's tx list. In addition, qp->s_flags is cleared of RVT_S_ANY_WAIT_IO bits, which does not include HFI1_S_WAIT_PIO_DRAIN bit;
(3) The hfi1_schdule_send() function is called to drain the QP's send queue. Subsequently, hfi1_do_send() is called. Since the flag bit HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails. As a result, hfi1_do_send() bails out without draining any request from the send queue;
(4) The PIO engine completes the sending and tries to wake up any QP on its waiting list. But the QP has been removed from the PIO waiting list and therefore is kept in sleep forever.
The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2). HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN.
--- drivers/infiniband/hw/hfi1/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/hfi1/qp.c +1 -1
@@ -833,7 +833,7 @@ void notify_error_qp(struct rvt_qp *qp)write_seqlock (lock);if (!list_empty (&priv->s_iowait.list) && !(qp->s_flags &RVT_S_BUSY )) { - qp->s_flags &= ~RVT_S_ANY_WAIT_IO ; + qp->s_flags &= ~HFI1_S_ANY_WAIT_IO ;list_del_init (&priv->s_iowait.list); priv->s_iowait.lock =NULL ;rvt_put_qp (qp);
Jon Hunter
maintainerQuoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.0.y
and the diffstat can be found below.thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.0:
11 builds: 11 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 failLinux version: 5.0.9-rc1-g68497c6
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04Cheers
Jon
Signature · 1 line
nvpublic
Greg Kroah-Hartman
maintainerQuoted 23 lines · Jon Hunter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.0.y
and the diffstat can be found below.thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.0:
Quoted 8 lines
11 builds: 11 pass, 0 fail 22 boots: 22 pass, 0 fail 32 tests: 32 pass, 0 failLinux version: 5.0.9-rc1-g68497c6 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra20-ventana, tegra210-p2371-2180, tegra30-cardhu-a04
Thanks for testing all of these and letting me know.
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.0.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Greg Kroah-Hartman
maintainerQuoted 15 lines · shuah
Quoted 14 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.0.y
and the diffstat can be found below.
Quoted 6 lines
Quoted 4 lines
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
Build results:
total: 159 pass: 157 fail: 2 Failed builds: i386:tools/perf x86_64:tools/perf Qemu test results: total: 349 pass: 349 fail: 0
Guenter
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
Quoted 8 lines
Build results:
total: 159 pass: 157 fail: 2 Failed builds: i386:tools/perf x86_64:tools/perf Qemu test results: total: 349 pass: 349 fail: 0
Update: The build failure has been fixed with v5.0.8-94-ga6b9c7d1cb06.
Guenter
Greg Kroah-Hartman
maintainerQuoted 20 lines · Guenter Roeck
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
Quoted 8 lines
Build results:
total: 159 pass: 157 fail: 2 Failed builds: i386:tools/perf x86_64:tools/perf Qemu test results: total: 349 pass: 349 fail: 0
Quoted 1 line
Update: The build failure has been fixed with v5.0.8-94-ga6b9c7d1cb06.
Wonderful. Sorry about the problems this round, thanks for the testing and letting us know.
greg k-h
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.0.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.0.9-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.0.y
git commit: a6b9c7d1cb06316cd1cea76371029603b6459de8
git describe: v5.0.8-94-ga6b9c7d1cb06
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.0-oe/build/v5.0.8-94-ga6b9c7d1cb06
No regressions (compared to build v5.0.7-118-ge6fdfdbfcc6a)
No fixes (compared to build v5.0.7-118-ge6fdfdbfcc6a)
Ran 23788 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
Test Suites
-----------
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* kvm-unit-tests
* ltp-fs-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
Signature · 2 lines
Linaro LKFT https://lkft.linaro.org
Greg Kroah-Hartman
maintainerQuoted 17 lines · Naresh Kamboju
Quoted 15 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.0.9 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Apr 20 16:03:33 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.9-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-5.0.y
and the diffstat can be found below.
Quoted 7 lines
Quoted 4 lines
thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm,x86_64, and i386.
Thanks for testing these and letting me know.
greg k-h
Built and booted on my x86 machine.
Observed no dmesg regressions.
Greg Kroah-Hartman
maintainerQuoted 2 lines · Bharath Vedartham
Built and booted on my x86 machine.
Observed no dmesg regressions.
Thanks for testing two of these and letting me know.
greg k-h