Skip to contentSkip to conversation

Add runtime PM for SAI digital audio interface

PATCH In review Daniel Baluta 3 participants 8 messages Apr 20, 2019 – Apr 22, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover Add runtime PM for SAI digital audio interface

First patch uses system PM handlers to implement runtime PM. While the second patch moves clock handling from startup/shutdown to runtime PM handlers.

Daniel Baluta (1):
ASoC: fsl: sai: Add support for runtime pm

Shengjiu Wang (1):
ASoC: fsl: Move clock operation to PM runtime

 sound/soc/fsl/fsl_sai.c | 70 ++++++++++++++++++++++++++++++++---------
 1 file changed, 55 insertions(+), 15 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/2 ASoC: fsl: sai: Add support for runtime pm

Basically the same actions as for system PM, so make use of pm_runtime_force_suspend/pm_runtime_force_resume.

---
 sound/soc/fsl/fsl_sai.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
sound/soc/fsl/fsl_sai.c +11 -5
index b563004fb89f..aeeb07b74177 100644
@@ -9,6 +9,7 @@
 #include <linux/dmaengine.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/time.h>
@@ -898,6 +899,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sai);
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
 			&fsl_sai_dai, 1);
 	if (ret)
@@ -917,8 +920,8 @@ static const struct of_device_id fsl_sai_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, fsl_sai_ids);
 
-#ifdef CONFIG_PM_SLEEP
-static int fsl_sai_suspend(struct device *dev)
+#ifdef CONFIG_PM
+static int fsl_sai_runtime_suspend(struct device *dev)
 {
 	struct fsl_sai *sai = dev_get_drvdata(dev);
 
@@ -928,7 +931,7 @@ static int fsl_sai_suspend(struct device *dev)
 	return 0;
 }
 
-static int fsl_sai_resume(struct device *dev)
+static int fsl_sai_runtime_resume(struct device *dev)
 {
 	struct fsl_sai *sai = dev_get_drvdata(dev);
 
@@ -940,10 +943,13 @@ static int fsl_sai_resume(struct device *dev)
 	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
 	return regcache_sync(sai->regmap);
 }
-#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops fsl_sai_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fsl_sai_suspend, fsl_sai_resume)
+	SET_RUNTIME_PM_OPS(fsl_sai_runtime_suspend,
+			   fsl_sai_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
 };
 
 static struct platform_driver fsl_sai_driver = {
Signature · 1 line
2.17.1
reviewer
#2 lore raw

Re: [PATCH 1/2] ASoC: fsl: sai: Add support for runtime pm

sound/soc/fsl/fsl_sai.c static int fsl_sai_probe(struct platform_device *pdev) · line 902

Quoted 5 lines · Daniel Baluta
sound/soc/fsl/fsl_sai.c +1 -0
@@ -898,6 +899,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, sai);
 
+	pm_runtime_enable(&pdev->dev);

You will need pm_runtime_disable() somewhere, like remove().

Thanks

#3 lore raw

PATCH 2/2 ASoC: fsl: Move clock operation to PM runtime

In reply to Daniel Baluta

From: Shengjiu Wang <[email protected]>

Turn off/on clocks when device enters suspend/resume. This helps saving power.

---
 sound/soc/fsl/fsl_sai.c | 54 +++++++++++++++++++++++++++++++++--------
 1 file changed, 44 insertions(+), 10 deletions(-)
sound/soc/fsl/fsl_sai.c +44 -10
index aeeb07b74177..a224c07ce31f 100644
@@ -594,15 +594,8 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 {
 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
-	struct device *dev = &sai->pdev->dev;
 	int ret;
 
-	ret = clk_prepare_enable(sai->bus_clk);
-	if (ret) {
-		dev_err(dev, "failed to enable bus clock: %d\n", ret);
-		return ret;
-	}
-
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE,
 			   FSL_SAI_CR3_TRCE);
 
@@ -619,8 +612,6 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
-
-	clk_disable_unprepare(sai->bus_clk);
 }
 
 static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
@@ -925,6 +916,14 @@ static int fsl_sai_runtime_suspend(struct device *dev)
 {
 	struct fsl_sai *sai = dev_get_drvdata(dev);
 
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
+		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
+		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
+
+	clk_disable_unprepare(sai->bus_clk);
+
 	regcache_cache_only(sai->regmap, true);
 	regcache_mark_dirty(sai->regmap);
 
@@ -934,6 +933,25 @@ static int fsl_sai_runtime_suspend(struct device *dev)
 static int fsl_sai_runtime_resume(struct device *dev)
 {
 	struct fsl_sai *sai = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(sai->bus_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable bus clock: %d\n", ret);
+		return ret;
+	}
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
+		if (ret)
+			goto disable_bus_clk;
+	}
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
+		if (ret)
+			goto disable_tx_clk;
+	}
 
 	regcache_cache_only(sai->regmap, false);
 	regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
@@ -941,7 +959,23 @@ static int fsl_sai_runtime_resume(struct device *dev)
 	usleep_range(1000, 2000);
 	regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
 	regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
-	return regcache_sync(sai->regmap);
+
+	ret = regcache_sync(sai->regmap);
+	if (ret)
+		goto disable_rx_clk;
+
+	return 0;
+
+disable_rx_clk:
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
+		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
+disable_tx_clk:
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
+		clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
+disable_bus_clk:
+	clk_disable_unprepare(sai->bus_clk);
+
+	return ret;
 }
 #endif /* CONFIG_PM */
 
Signature · 1 line
2.17.1
reviewer
#4 lore raw

Re: [PATCH 2/2] ASoC: fsl: Move clock operation to PM runtime

Quoted 16 lines · Daniel Baluta

Turn off/on clocks when device enters suspend/resume. This helps saving power.

sound/soc/fsl/fsl_sai.c +9 -0
@@ -934,6 +933,25 @@ static int fsl_sai_runtime_suspend(struct device *dev)
 static int fsl_sai_runtime_resume(struct device *dev)
 {
 	struct fsl_sai *sai = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(sai->bus_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable bus clock: %d\n", ret);
+		return ret;
+	}
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {

sound/soc/fsl/fsl_sai.c static int fsl_sai_runtime_suspend(struct device *dev) · line 954

Quoted 10 lines
sound/soc/fsl/fsl_sai.c +10 -0
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
+		if (ret)
+			goto disable_bus_clk;
+	}
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
+		if (ret)
+			goto disable_tx_clk;
+	}

The driver only enables mclk_clks for I2S master mode. But this change enables them for I2S slave mode also. It doesn't sound a right thing to me since we are supposed to save power?

#5 lore raw

Re: [PATCH 2/2] ASoC: fsl: Move clock operation to PM runtime

Hi Nicolin,

Quoted 23 lines · Nicolin Chen
Quoted 22 lines · Daniel Baluta

Turn off/on clocks when device enters suspend/resume. This helps saving power.

sound/soc/fsl/fsl_sai.c +14 -0
@@ -934,6 +933,25 @@ static int fsl_sai_runtime_suspend(struct device *dev)
  static int fsl_sai_runtime_resume(struct device *dev)
  {
  	struct fsl_sai *sai = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(sai->bus_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable bus clock: %d\n", ret);
+		return ret;
+	}
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
+		if (ret)
+			goto disable_bus_clk;
+	}
+
Quoted 8 lines

sound/soc/fsl/fsl_sai.c static int fsl_sai_runtime_suspend(struct device *dev) · line 954

Quoted 5 lines
sound/soc/fsl/fsl_sai.c +5 -0
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
+		if (ret)
+			goto disable_tx_clk;
+	}

The driver only enables mclk_clks for I2S master mode. But this change enables them for I2S slave mode also. It doesn't sound a right thing to me since we are supposed to save power?

This change does not enable them for I2S slave mode, please check "fsl_sai_hw_params" and "fsl_sai_hw_free" functions: the field "sai->mclk_streams" is modified only for the case when "if (!sai->is_slave_mode)";

Regards,
Viorel

reviewer
#6 lore raw

Re: [PATCH 2/2] ASoC: fsl: Move clock operation to PM runtime

Quoted 35 lines · Viorel Suman

Hi Nicolin,

Quoted 23 lines · Nicolin Chen
Quoted 22 lines · Daniel Baluta

Turn off/on clocks when device enters suspend/resume. This helps saving power.

sound/soc/fsl/fsl_sai.c +14 -0
@@ -934,6 +933,25 @@ static int fsl_sai_runtime_suspend(struct device *dev)
  static int fsl_sai_runtime_resume(struct device *dev)
  {
  	struct fsl_sai *sai = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(sai->bus_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable bus clock: %d\n", ret);
+		return ret;
+	}
+
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
+		if (ret)
+			goto disable_bus_clk;
+	}
+
Quoted 8 lines

sound/soc/fsl/fsl_sai.c static int fsl_sai_runtime_suspend(struct device *dev) · line 954

Quoted 5 lines
sound/soc/fsl/fsl_sai.c +5 -0
+	if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
+		ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
+		if (ret)
+			goto disable_tx_clk;
+	}

The driver only enables mclk_clks for I2S master mode. But this change enables them for I2S slave mode also. It doesn't sound a right thing to me since we are supposed to save power?

Quoted 3 lines

This change does not enable them for I2S slave mode, please check "fsl_sai_hw_params" and "fsl_sai_hw_free" functions: the field "sai->mclk_streams" is modified only for the case when "if (!sai->is_slave_mode)";

Thanks for the input. This should be fine then.

Nicolin

reviewer
#7 lore raw
In reply to Daniel Baluta
Quoted 6 lines · Daniel Baluta

First patch uses system PM handlers to implement runtime PM. While the second patch moves clock handling from startup/shutdown to runtime PM handlers.

ASoC: fsl: sai: Add support for runtime pm
ASoC: fsl: Move clock operation to PM runtime

Both patches should use the prefix:
ASoC: fsl_sai: Xxxxx yyyy

Thanks