dt-bindings: qoriq-clock: add more PLL divider clocks support
Subsystems (2)
PATCH 1/2 dt-bindings: qoriq-clock: add more PLL divider clocks support
From: Yuantian Tang <[email protected]>
More PLL divider clocks are needed by clock consumer IP. So update the PLL divider description to make it more general.
--- .../devicetree/bindings/clock/qoriq-clock.txt | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/clock/qoriq-clock.txt +2 -2
@@ -83,8 +83,8 @@ second cell is the clock index for the specified type. 1 cmux index (n in CLKCnCSR) 2 hwaccel index (n in CLKCGnHWACSR) 3 fman 0 for fm1, 1 for fm2 - 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 - 4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8 + 4 platform pll n=pll/(n+1). For example, when n=1, + that means output_freq=PLL_freq/2. 5 coreclk must be 0 3. Example
Signature · 1 line
1.7.1
PATCH 2/2 clk: qoriq: add more PLL divider clocks support
From: Yuantian Tang <[email protected]>
More PLL divider clocks are needed by clock consumer IP. So enlarge the PLL divider array to accommodate more divider clocks.
--- drivers/clk/clk-qoriq.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/clk/clk-qoriq.c +3 -2
@@ -34,6 +34,7 @@#define CGA_PLL4 4/* only on clockgen-1.0, which lacks CGB */ #define CGB_PLL1 4#define CGB_PLL2 5 +#define MAX_PLL_DIV 16struct clockgen_pll_div {struct clk *clk;
@@ -41,7 +42,7 @@ struct clockgen_pll_div { };struct clockgen_pll { -struct clockgen_pll_div div[8 ]; +struct clockgen_pll_div div[MAX_PLL_DIV ]; };#define CLKSEL_VALID 1
@@ -1128,7 +1129,7 @@ static void __init create_one_pll(struct clockgen *cg, int idx)int ret;/* -* For platform PLL, there are 8 divider clocks. +* For platform PLL, there are MAX_PLL_DIV divider clocks. * For core PLL, there are 4 divider clocks at most. */ if (idx !=PLATFORM_PLL && i >=4 )
Signature · 1 line
1.7.1
Re: [PATCH 2/2] clk: qoriq: add more PLL divider clocks support
Quoting [email protected] (2019-04-22 02:15:09)
Quoted 7 lines
From: Yuantian Tang <[email protected]>
More PLL divider clocks are needed by clock consumer IP. So enlarge the PLL divider array to accommodate more divider clocks.
Signed-off-by Yuantian Tang <[email protected]>---
Applied to clk-next
Quoting [email protected] (2019-04-22 02:15:08)
Quoted 7 lines
From: Yuantian Tang <[email protected]>
More PLL divider clocks are needed by clock consumer IP. So update the PLL divider description to make it more general.
Signed-off-by Yuantian Tang <[email protected]>---
Applied to clk-next