usb: typec: Add driver for NVIDIA Alt Modes
Subsystems (3)
Heikki Krogerus
maintainerPATCH v4 7/7 usb: typec: Add driver for NVIDIA Alt Modes
From: Ajay Gupta <[email protected]>
Latest NVIDIA GPUs support VirtualLink device. Since USBIF has not assigned a Standard ID (SID) for VirtualLink so using NVIDA VID 0x955 as SVID.
Signed-off-by Ajay Gupta <[email protected]>
Signed-off-by Heikki Krogerus <[email protected]>
--- drivers/usb/typec/altmodes/Kconfig | 10 +++++++ drivers/usb/typec/altmodes/Makefile | 2 ++ drivers/usb/typec/altmodes/nvidia.c | 44 +++++++++++++++++++++++++++++ drivers/usb/typec/ucsi/ucsi.c | 4 ++- include/linux/usb/typec_dp.h | 5 ++++ 5 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/typec/altmodes/nvidia.c
drivers/usb/typec/altmodes/Kconfig +10 -0
@@ -12,4 +12,14 @@ config TYPEC_DP_ALTMODE To compile this driver as a module, choose M here: the module will be called typec_displayport. +config TYPEC_NVIDIA_ALTMODE + tristate "NVIDIA Alternate Mode driver" + depends on TYPEC_DP_ALTMODE + help + Latest NVIDIA GPUs support VirtualLink devices. Select this + to enable support for VirtualLink devices with NVIDIA GPUs. + + To compile this driver as a module, choose M here: the + module will be called typec_displayport. + endmenu
drivers/usb/typec/altmodes/Makefile +2 -0
@@ -2,3 +2,5 @@ obj-$(CONFIG_TYPEC_DP_ALTMODE) += typec_displayport.o typec_displayport-y := displayport.o +obj-$(CONFIG_TYPEC_NVIDIA_ALTMODE) += typec_nvidia.o +typec_nvidia-y := nvidia.o
drivers/usb/typec/altmodes/nvidia.c new file +44 -0
44 lines not on this page · raw message
drivers/usb/typec/ucsi/ucsi.c +3 -1
@@ -283,6 +283,7 @@ static int ucsi_register_altmode(struct ucsi_connector *con,switch (desc->svid) {case USB_TYPEC_DP_SID : +case USB_TYPEC_NVIDIA_VLINK_SID : alt =ucsi_register_displayport (con, override, i, desc);break ;default :
@@ -404,7 +405,8 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)while (adev[i]) {if (recipient ==UCSI_RECIPIENT_SOP && - adev[i]->svid ==USB_TYPEC_DP_SID ) { + (adev[i]->svid ==USB_TYPEC_DP_SID || + adev[i]->svid ==USB_TYPEC_NVIDIA_VLINK_SID )) { pdev =typec_altmode_get_partner (adev[i]);ucsi_displayport_remove_partner ((void *)pdev); }
include/linux/usb/typec_dp.h +5 -0
@@ -5,6 +5,11 @@#include <linux/usb/typec_altmode.h> #define USB_TYPEC_DP_SID 0xff01 +/* USB IF has not assigned a Standard ID (SID) for VirtualLink, +* so the manufacturers of VirtualLink adapters use their Vendor +* IDs as the SVID. +*/ +#define USB_TYPEC_NVIDIA_VLINK_SID 0x955/* NVIDIA VirtualLink */ #define USB_TYPEC_DP_MODE 1/*