Skip to contentSkip to conversation

common: fdt_support: Check mtdparts cell size

PATCH New Stefan Mavrodiev 2 participants 3 messages Apr 24, 2019 – May 22, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 common: fdt_support: Check mtdparts cell size

When using fdt_fixup_mtdparts() offset and length cell sizes are limited to 4 bytes (1 cell). However if the mtd device is bigger then 4GiB, then #address-cells and #size-cells are 8 bytes (2 cells) [1].

This patch read #size-cells and uses either fdt32_t or fdt64_t cell size. The default is fdt32_t.

[1] Documentation/devicetree/bindings/mtd/partition.txt

---
Changes for v2:
- Use fdt_setprop_u64() and ..._u32() instead of fdt_setprop()
- Add size value using fdt_appendprop_u64() and ..._u32()

 common/fdt_support.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)
common/fdt_support.c +22 -9
index 42583e3ed8..1c1a954829 100644
@@ -724,11 +724,6 @@ int fdt_increase_size(void *fdt, int add_len)
 #include <jffs2/load_kernel.h>
 #include <mtd_node.h>
 
-struct reg_cell {
-	unsigned int r0;
-	unsigned int r1;
-};
-
 static int fdt_del_subnodes(const void *blob, int parent_offset)
 {
 	int off, ndepth;
@@ -787,15 +782,22 @@ int fdt_node_set_part_info(void *blob, int parent_offset,
 {
 	struct list_head *pentry;
 	struct part_info *part;
-	struct reg_cell cell;
 	int off, ndepth = 0;
 	int part_num, ret;
+	int sizecell;
 	char buf[64];
 
 	ret = fdt_del_partitions(blob, parent_offset);
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * Check if size/address is 1 or 2 cells.
+	 * We assume #address-cells and #size-cells have same value.
+	 */
+	sizecell = fdt_getprop_u32_default_node(blob, parent_offset,
+						0, "#size-cells", 1);
+
 	/*
 	 * Check if it is nand {}; subnode, adjust
 	 * the offset in this case
@@ -844,10 +846,21 @@ add_ro:
 				goto err_prop;
 		}
 
-		cell.r0 = cpu_to_fdt32(part->offset);
-		cell.r1 = cpu_to_fdt32(part->size);
 add_reg:
-		ret = fdt_setprop(blob, newoff, "reg", &cell, sizeof(cell));
+		if (sizecell == 2) {
+			ret = fdt_setprop_u64(blob, newoff,
+					      "reg", part->offset);
+			if (!ret)
+				ret = fdt_appendprop_u64(blob, newoff,
+							 "reg", part->size);
+		} else {
+			ret = fdt_setprop_u32(blob, newoff,
+					      "reg", part->offset);
+			if (!ret)
+				ret = fdt_appendprop_u32(blob, newoff,
+							 "reg", part->size);
+		}
+
 		if (ret == -FDT_ERR_NOSPACE) {
 			ret = fdt_increase_size(blob, 512);
 			if (!ret)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/1 common: fdt_support: Check mtdparts cell size

Quoted 11 lines · Stefan Mavrodiev

When using fdt_fixup_mtdparts() offset and length cell sizes are limited to 4 bytes (1 cell). However if the mtd device is bigger then 4GiB, then #address-cells and #size-cells are 8 bytes (2 cells) [1].

This patch read #size-cells and uses either fdt32_t or fdt64_t cell size. The default is fdt32_t.

[1] Documentation/devicetree/bindings/mtd/partition.txt

Quoted 9 lines

---
Changes for v2:
- Use fdt_setprop_u64() and ..._u32() instead of fdt_setprop()
- Add size value using fdt_appendprop_u64() and ..._u32()

 common/fdt_support.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)
#2 lore raw

PATCH v2 1/1 common: fdt_support: Check mtdparts cell size

Quoted 19 lines · Simon Glass
Quoted 17 lines · Stefan Mavrodiev

When using fdt_fixup_mtdparts() offset and length cell sizes are limited to 4 bytes (1 cell). However if the mtd device is bigger then 4GiB, then #address-cells and #size-cells are 8 bytes (2 cells) [1].

This patch read #size-cells and uses either fdt32_t or fdt64_t cell size. The default is fdt32_t.

[1] Documentation/devicetree/bindings/mtd/partition.txt

---
Changes for v2:
- Use fdt_setprop_u64() and ..._u32() instead of fdt_setprop()
- Add size value using fdt_appendprop_u64() and ..._u32()

Quoted 5 lines
Quoted 3 lines
 common/fdt_support.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

Applied to u-boot-dm, thanks!