Skip to contentSkip to conversation

Build error: caused by CONFIG_SPL_LOG_CONSOLE

U-Boot U.Mutlu 2 participants 2 messages Apr 12, 2019 – Apr 24, 2019

lore
Share & tools
lore

U.Mutlu

author
#0 lore raw

If I activate "Enable logging support in SPL" (ie. CONFIG_SPL_LOG_CONSOLE), ie. the following window in make menuconfig:

Logging --->

[*] Enable logging support
[*] Enable logging support in SPL
[*] Enable logging support in TPL
(5) Maximum log level to record
(3) Maximum log level to record in SPL (NEW)
(3) Maximum log level to record in TPL
(6) Default logging level to display
[*] Allow log output to the console
[*] Allow log output to the console in SPL (NEW) [*] Allow log output to the console in SPL [ ] Provide a test for logging
[*] Log all functions which return an error

then the build fails as follows (paths sanitized):

arm-linux-gnueabihf-ld.bfd: common/built-in.o: in function `log_get_cat_name':
/.../u-boot/common/log.c:48: undefined reference to uclass_get_name' arm-linux-gnueabihf-ld.bfd: common/built-in.o: in function _log':
/.../u-boot/common/log.c:212: undefined reference to `vsnprintf' scripts/Makefile.spl:384: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 1
Makefile:1664: recipe for target 'spl/u-boot-spl' failed
make: *** [spl/u-boot-spl] Error 2

Deactivating "Enable logging support in SPL" builds ok.

Version:
U-Boot 2019.04-00077-g48ff1bc4f0
(using stock git source tree w/o any own modifications)

Platform:
CONFIG_ARM=y
CONFIG_SYS_ARCH="arm"
CONFIG_SYS_CPU="armv7"
CONFIG_SYS_SOC="sunxi"
CONFIG_SYS_BOARD="sunxi"
CONFIG_SYS_CONFIG_NAME="sun7i"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"

#1 lore raw
Quoted 30 lines · U.Mutlu

If I activate "Enable logging support in SPL" (ie. CONFIG_SPL_LOG_CONSOLE), ie. the following window in make menuconfig:

Logging --->

[*] Enable logging support
[*] Enable logging support in SPL
[*] Enable logging support in TPL
(5) Maximum log level to record
(3) Maximum log level to record in SPL (NEW)
(3) Maximum log level to record in TPL
(6) Default logging level to display
[*] Allow log output to the console
[*] Allow log output to the console in SPL (NEW) [*] Allow log output to the console in SPL [ ] Provide a test for logging
[*] Log all functions which return an error

then the build fails as follows (paths sanitized):

arm-linux-gnueabihf-ld.bfd: common/built-in.o: in function `log_get_cat_name':
/.../u-boot/common/log.c:48: undefined reference to uclass_get_name' arm-linux-gnueabihf-ld.bfd: common/built-in.o: in function _log':
/.../u-boot/common/log.c:212: undefined reference to `vsnprintf' scripts/Makefile.spl:384: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 1
Makefile:1664: recipe for target 'spl/u-boot-spl' failed
make: *** [spl/u-boot-spl] Error 2

Quoted 1 line

Deactivating "Enable logging support in SPL" builds ok.

Sounds like the Kconfig option is missing a depends on line.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/3b1c89a2/attachment.sig>