ARM: da850evm: Remove legacy MMC code
PATCH 1/1 ARM: da850evm: Remove legacy MMC code
With the migration to DM in SPL and the DT support, the old legacy code is no longer neaded, so this patch removes it
Signed-off-by Adam Ford <[email protected]>
board/davinci/da8xxevm/da850evm.c +0 -19
@@ -204,25 +204,6 @@ int misc_init_r(void)return 0 ; } -#ifndef CONFIG_DM_MMC -#ifdef CONFIG_MMC_DAVINCI -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE , - .host_caps =MMC_MODE_4BIT ,/* DA850 supports only 4-bit SD/MMC */ - .voltages =MMC_VDD_32_33 |MMC_VDD_33_34 , - .version =MMC_CTLR_VERSION_2 , -}; - -int board_mmc_init (bd_t *bis) -{ - mmc_sd0.input_clk =clk_get (DAVINCI_MMCSD_CLKID ); - -/* Add slot-0 to mmc subsystem */ -return davinci_mmc_init (bis, &mmc_sd0); -} -#endif -#endif -static const struct pinmux_config gpio_pins[] = { #ifdef CONFIG_USE_NOR /* GP0[11] is required for NOR to work on Rev 3 EVMs */
Signature · 1 line
2.17.1
board/davinci/da8xxevm/da850evm.c
Quoted 7 lines · Adam Ford
With the migration to DM in SPL and the DT support, the old legacy code is no longer neaded, so this patch removes it
Signed-off-by Adam Ford <[email protected]>board/davinci/da8xxevm/da850evm.c +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190424/580120c8/attachment.sig>