Skip to contentSkip to conversation

clk: imx: keep uart clock on during system boot

PATCH Applied Jacky Bai 3 participants 4 messages Apr 25, 2019 – Apr 26, 2019

Subsystems (3)
lore
Share & tools
lore

Jacky Bai

author
#0 lore raw

PATCH 1/1 clk: imx: keep uart clock on during system boot

Keep uart clocks enabled when earlyprintk or
earlycon is active.

---
 drivers/clk/imx/clk-imx6sll.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/clk/imx/clk-imx6sll.c +16 -0
index 3bd2044cf25c..35217c2f9f62 100644
@@ -76,6 +76,20 @@ static u32 share_count_ssi1;
 static u32 share_count_ssi2;
 static u32 share_count_ssi3;
 
+static struct clk ** const uart_clks[] __initconst = {
+	&clks[IMX6SLL_CLK_UART1_IPG],
+	&clks[IMX6SLL_CLK_UART1_SERIAL],
+	&clks[IMX6SLL_CLK_UART2_IPG],
+	&clks[IMX6SLL_CLK_UART2_SERIAL],
+	&clks[IMX6SLL_CLK_UART3_IPG],
+	&clks[IMX6SLL_CLK_UART3_SERIAL],
+	&clks[IMX6SLL_CLK_UART4_IPG],
+	&clks[IMX6SLL_CLK_UART4_SERIAL],
+	&clks[IMX6SLL_CLK_UART5_IPG],
+	&clks[IMX6SLL_CLK_UART5_SERIAL],
+	NULL
+};
+
 static void __init imx6sll_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
@@ -334,6 +348,8 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
+	imx_register_uart_clocks(uart_clks);
+
 	/* Lower the AHB clock rate before changing the clock source. */
 	clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000);
 
Signature · 1 line
2.21.0
maintainer
#1 lore raw

Quoting Jacky Bai (2019-04-25 01:10:08)

Quoted 5 lines

Keep uart clocks enabled when earlyprintk or
earlycon is active.

---

Looks OK to me. Shawn, will you pick it up? Or should I apply directly?

#2 lore raw
Quoted 8 lines · Stephen Boyd

Quoting Jacky Bai (2019-04-25 01:10:08)

Quoted 5 lines

Keep uart clocks enabled when earlyprintk or
earlycon is active.

---

Looks OK to me. Shawn, will you pick it up? Or should I apply directly?

Stephen, please apply directly.

Shawn