Skip to contentSkip to conversation

spec, Makefile: add /etc/nvme files to package files

PATCH New Sagi Grimberg 3 participants 4 messages Apr 24, 2019 – Apr 25, 2019

Subsystems (2)
lore
Share & tools
lore

Sagi Grimberg

author maintainer
#0 lore raw

PATCH 1/2 spec, Makefile: add /etc/nvme files to package files

This way it can automatically be removed upon uninstallation and we don't need %preun target. Also, this will also allow to get these files on manual installation from sources.

Also, don't settle on the "file exists" check, use the '-s' to check that it is not empty as well.

Lastly, in order to have hostnqn and hostid updated upon pkg install, we have install-spec target that would omit hostnqn and hostid files, and let the rpm %post do it (otherwise we use the normal install target).

Signed-off-by Sagi Grimberg <sagi at grimberg.me>
---
 Makefile     | 16 +++++++++++++++-
 nvme.spec.in | 25 +++++++++----------------
 2 files changed, 24 insertions(+), 17 deletions(-)
Makefile +15 -1
index 25c65ab09d67..02299c45734f 100644
@@ -90,7 +90,21 @@ install-zsh-completion:
 	$(INSTALL) -d $(DESTDIR)$(PREFIX)/share/zsh/site-functions
 	$(INSTALL) -m 644 -T ./completions/_nvme $(DESTDIR)$(PREFIX)/share/zsh/site-functions/_nvme
 
-install: install-bin install-man install-bash-completion install-zsh-completion
+install-hostparams:
+	if [ ! -s $(DESTDIR)$(SYSCONFDIR)/nvme/hostnqn ]; then \
+		echo `$(DESTDIR)$(SBINDIR)/nvme gen-hostnqn` > $(DESTDIR)$(SYSCONFDIR)/nvme/hostnqn; \
+	fi
+	if [ ! -s $(DESTDIR)$(SYSCONFDIR)/nvme/hostid ]; then \
+		uuidgen > $(DESTDIR)$(SYSCONFDIR)/nvme/hostid; \
+	fi
+
+install-etc:
+	$(INSTALL) -d $(DESTDIR)$(SYSCONFDIR)/nvme
+	touch $(DESTDIR)$(SYSCONFDIR)/nvme/hostnqn
+	touch $(DESTDIR)$(SYSCONFDIR)/nvme/hostid
+
+install-spec: install-bin install-man install-bash-completion install-zsh-completion install-etc
+install: install-spec install-hostparams
 
 nvme.spec: nvme.spec.in NVME-VERSION-FILE
 	sed -e 's/@@VERSION@@/$(NVME_VERSION)/g' < $< > $@+
nvme.spec.in +9 -16
index c16d0ec0645b..147b64a530f8 100644
@@ -22,7 +22,7 @@ make
 
 %install
 rm -rf $RPM_BUILD_ROOT
-make install DESTDIR=%{buildroot} PREFIX=/usr
+make install-spec DESTDIR=%{buildroot} PREFIX=/usr
 
 %files
 %defattr(-,root,root)
@@ -31,30 +31,23 @@ make install DESTDIR=%{buildroot} PREFIX=/usr
 %{_mandir}/man1/nvme*.1*
 %{_datadir}/bash-completion/completions/nvme
 %{_datadir}/zsh/site-functions/_nvme
+%dir %{_sysconfdir}/nvme
+%{_sysconfdir}/nvme/hostnqn
+%{_sysconfdir}/nvme/hostid
 
 %clean
 rm -rf $RPM_BUILD_ROOT
 
 %post
-if [ $1 = 1 ]; then # 1 : This package is being installed for the first time
-	if [ ! -f /etc/nvme/hostnqn ]; then
-		install -D /dev/null /etc/nvme/hostnqn
-		echo $(nvme gen-hostnqn) > /etc/nvme/hostnqn
+if [ $1 -eq 1 ]; then # 1 : This package is being installed for the first time
+	if [ ! -s %{_sysconfdir}/nvme/hostnqn ]; then
+		echo $(nvme gen-hostnqn) > %{_sysconfdir}/nvme/hostnqn
         fi
-        if [ ! -f /etc/nvme/hostid ]; then
-                uuidgen > /etc/nvme/hostid
+        if [ ! -s %{_sysconfdir}/nvme/hostid ]; then
+                uuidgen > %{_sysconfdir}/nvme/hostid
         fi
 fi
 
-%preun
-if [ "$1" = "remove" ]; then
-	if [ -d /etc/nvme ]; then
-		rm -f /etc/nvme/hostnqn
-		if [ ! -n "`ls -A /etc/nvme`" ]; then
-			rm -rf /etc/nvme
-		fi
-	fi
-fi
 %changelog
 * Mon Oct 15 2018 Eyal Ben-David <eyalbe at il.ibm.com> - 1.6.81.g899a-2
 - bash-completion check
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH 2/2 spec, make: Add discovery.conf to the package files list

Lets add it as part of the package with a little documentation.

Signed-off-by Sagi Grimberg <sagi at grimberg.me>
---
 Makefile              | 3 +++
 etc/discovery.conf.in | 4 ++++
 nvme.spec.in          | 1 +
 3 files changed, 8 insertions(+)
 create mode 100644 etc/discovery.conf.in
Makefile +3 -0
index 02299c45734f..4bfbebbd156a 100644
@@ -102,6 +102,9 @@ install-etc:
 	$(INSTALL) -d $(DESTDIR)$(SYSCONFDIR)/nvme
 	touch $(DESTDIR)$(SYSCONFDIR)/nvme/hostnqn
 	touch $(DESTDIR)$(SYSCONFDIR)/nvme/hostid
+	if [ ! -f $(DESTDIR)$(SBINDIR)/nvme/discovery.conf ]; then \
+		$(INSTALL) -m 644 -T ./etc/discovery.conf.in $(DESTDIR)$(SYSCONFDIR)/nvme/discovery.conf; \
+	fi
 
 install-spec: install-bin install-man install-bash-completion install-zsh-completion install-etc
 install: install-spec install-hostparams
etc/discovery.conf.in new file +4 -0
new file mode 100644
index 000000000000..14e0d9c3dcbf
@@ -0,0 +1,4 @@
+# Used for extracting default parameters for discovery
+#
+# Example:
+# --transport=<trtype> --traddr=<traddr> --trsvcid=<trsvcid> --host-traddr=<host-traddr>
nvme.spec.in +1 -0
index 147b64a530f8..6934f8fd605b 100644
@@ -34,6 +34,7 @@ make install-spec DESTDIR=%{buildroot} PREFIX=/usr
 %dir %{_sysconfdir}/nvme
 %{_sysconfdir}/nvme/hostnqn
 %{_sysconfdir}/nvme/hostid
+%{_sysconfdir}/nvme/discovery.conf
 
 %clean
 rm -rf $RPM_BUILD_ROOT
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/2 spec, make: Add discovery.conf to the package files list

Looks good to me.

Reviewed-by Minwoo Im <minwoo.im.dev at gmail.com>
#3 lore raw

PATCH 1/2 spec, Makefile: add /etc/nvme files to package files

In reply to Sagi Grimberg
Quoted 11 lines · Sagi Grimberg

This way it can automatically be removed upon uninstallation and we don't need %preun target. Also, this will also allow to get these files on manual installation from sources.

Also, don't settle on the "file exists" check, use the '-s' to check that it is not empty as well.

Lastly, in order to have hostnqn and hostid updated upon pkg install, we have install-spec target that would omit hostnqn and hostid files, and let the rpm %post do it (otherwise we use the normal install target).

Sounds good, applied both patches.