Convert WaRP7 to DM_USB and DM_SERIAL
Subsystems (2)
v2 cover Convert WaRP7 to DM_USB and DM_SERIAL
This series convert the WaRP7 to the following DM:
-CONFIG_DM_USB
-CONFIG_DM_SERIAL
Change in v2:
- Now split in two distinct patches (DM_USB & DM_SERIAL)
Pierre-Jean Texier (2):
warp7: Switch to DM Serial
warp7: Switch to DM USB
arch/arm/dts/imx7s-warp.dts | 5 +++++ board/warp7/warp7.c | 6 ------ configs/warp7_bl33_defconfig | 3 +++ configs/warp7_defconfig | 3 +++ include/configs/warp7.h | 2 -- 5 files changed, 11 insertions(+), 8 deletions(-)
Signature · 1 line
2.7.4
PATCH v2 1/2 warp7: Switch to DM Serial
This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs.
---
Changes in v2:
- Split patch
- Removed CONFIG_MXC_UART_BASE from config file
arch/arm/dts/imx7s-warp.dts | 4 ++++ configs/warp7_bl33_defconfig | 2 ++ configs/warp7_defconfig | 2 ++ include/configs/warp7.h | 2 -- 4 files changed, 8 insertions(+), 2 deletions(-)
arch/arm/dts/imx7s-warp.dts +4 -0
@@ -21,6 +21,10 @@ mmc0 = &usdhc3; }; + chosen { + stdout-path = &uart1; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&pinctrl_gpio>;
configs/warp7_bl33_defconfig +2 -0
@@ -38,6 +38,8 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y
configs/warp7_defconfig +2 -0
@@ -47,6 +47,8 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y CONFIG_OPTEE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y
include/configs/warp7.h +0 -2
@@ -24,8 +24,6 @@#endif #endif -#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR -/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
Signature · 1 line
2.7.4
Fabio Estevam
reviewerPATCH v2 1/2 warp7: Switch to DM Serial
Quoted 5 lines · Pierre-Jean Texier
This commit switches to DM SERIAL for warp7 and
warp7_bl33defconfigs.Signed-off-by Pierre-Jean Texier <[email protected]>Signed-off-by Joris Offouga <[email protected]>
PATCH v2 1/2 warp7: Switch to DM Serial
In reply to Pierre-Jean TexierQuoted 4 lines
This commit switches to DM SERIAL for warp7 and
warp7_bl33defconfigs.Signed-off-by Pierre-Jean Texier <[email protected]>Signed-off-by Joris Offouga <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 2/2 warp7: Switch to DM USB
In reply to Pierre-Jean TexierThis commit switches to DM USB for warp7 and warp7_bl33 defconfigs.
---
Changes in v2:
- Split patch
- Removed unused header file <usb.h>
arch/arm/dts/imx7s-warp.dts | 1 + board/warp7/warp7.c | 6 ------ configs/warp7_bl33_defconfig | 1 + configs/warp7_defconfig | 1 + 4 files changed, 3 insertions(+), 6 deletions(-)
arch/arm/dts/imx7s-warp.dts +1 -0
@@ -19,6 +19,7 @@ aliases { mmc0 = &usdhc3; + usb0 = &usbotg1; }; chosen {
board/warp7/warp7.c +0 -6
@@ -14,7 +14,6 @@#include <asm/io.h> #include <common.h> #include <asm/arch/crm_regs.h> -#include <usb.h> #include <netdev.h> #include <power/pmic.h> #include <power/pfuze3000_pmic.h>
@@ -128,11 +127,6 @@ int checkboard(void)return 0 ; } -int board_usb_phy_mode (int port) -{ -return USB_INIT_DEVICE ; -} -int board_late_init (void ) {struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR ;
configs/warp7_bl33_defconfig +1 -0
@@ -41,6 +41,7 @@ CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y CONFIG_USB_GADGET=y
configs/warp7_defconfig +1 -0
@@ -51,6 +51,7 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_OPTEE=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y CONFIG_USB_GADGET=y
Signature · 1 line
2.7.4
Fabio Estevam
reviewerPATCH v2 2/2 warp7: Switch to DM USB
Quoted 5 lines · Pierre-Jean Texier
This commit switches to DM USB for warp7 and
warp7_bl33defconfigs.Signed-off-by Pierre-Jean Texier <[email protected]>Signed-off-by Joris Offouga <[email protected]>
PATCH v2 2/2 warp7: Switch to DM USB
In reply to Pierre-Jean TexierQuoted 4 lines
This commit switches to DM USB for warp7 and
warp7_bl33defconfigs.Signed-off-by Pierre-Jean Texier <[email protected]>Signed-off-by Joris Offouga <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================