Skip to contentSkip to conversation

tests/kms_chamelium: add hdmi-audio test

PATCH In review Simon Ser 3 participants 12 messages Apr 26, 2019 – May 10, 2019 Library code

lore
Share & tools
lore

Simon Ser

author
#0 lore raw

cover tests/kms_chamelium: add hdmi-audio test

This patch series adds a new hdmi-audio test to the Chamelium suite.

Generating our own EDID is necessary to get HDMI audio to work. Patches 1 and 2 add the necessary features to lib/igt_edid. Patch 3 uses this library to generate the appropriate EDID. Other patches are minor fixes and improvements.

Simon Ser (7):
lib/igt_edid: add support for Short Audio Descriptors lib/igt_edid: add support for Vendor Specific Data blocks tests/kms_chamelium: generate an EDID with audio support test/kms_chamelium: disable >48KHz audio tests tests/kms_chamelium: enable audio test on HDMI ports tests/kms_chamelium: don't abort audio test on first fail
HAX: add dp-audio test to fast-feedback

 lib/igt_chamelium.c                   |   9 +-
 lib/igt_edid.c                        | 113 +++++++++++++++--
 lib/igt_edid.h                        | 103 +++++++++++++++-
 tests/intel-ci/fast-feedback.testlist |   1 +
 tests/kms_chamelium.c                 | 171 ++++++++++++++++++--------
 5 files changed, 332 insertions(+), 65 deletions(-)
Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
author
#1 lore raw

PATCH 1/7 lib/igt_edid: add support for Short Audio Descriptors

Short Audio Descriptors (SADs) can be wrapped in an EDID extension to advertise audio support.

The EDID structure is as follows:
- The 128-byte EDID block contains a field with the number of 128-byte extension blocks that follow.
- Each extension block has a tag which specifies its type. The tag we're interested in is CEA-861.
- The CEA block has a few flags, including one that indicates whether basic audio is supported. The CEA block contains several sub-blocks of variable size. There are two types of CEA sub-blocks:
- Detailed Timing Descriptors (DTDs): additional video timings
- Data Block Collection: these can detail video, audio, speaker placement and other pieces of information about the display.
We're interested in audio blocks.
- Audio blocks contain one or more Short Audio Descriptors (SADs). A SAD is a 3-byte record describing a supported format.
- SADs can describe support for the PCM format, including sampling rate, sample size and channels.

The igt_edid library intentionally exposes all of this complexity because it would be nice to generate all kind of valid EDIDs and test the kernel handles them correctly (e.g. multiple SADs in different CEA blocks, or any EDID we find in the wild really).

---
 lib/igt_edid.c | 71 +++++++++++++++++++++++++++++++++++++-----
 lib/igt_edid.h | 84 ++++++++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 145 insertions(+), 10 deletions(-)
lib/igt_edid.c +63 -8
index 9d604b13..d01defb0 100644
@@ -252,19 +252,74 @@ void edid_init_with_mode(struct edid *edid, drmModeModeInfo *mode)
 				   EDID_DETAIL_MONITOR_NAME, "IGT");
 }
 
+static uint8_t compute_checksum(const uint8_t *buf, size_t size)
+{
+	size_t i;
+	uint8_t sum = 0;
+
+	assert(size > 0);
+	for (i = 0; i < size - 1; i++) {
+		sum += buf[i];
+	}
+
+	return 256 - sum;
+}
+
 /**
  * edid_update_checksum: compute and update the EDID checksum
  */
 void edid_update_checksum(struct edid *edid)
 {
-	size_t i;
-	const uint8_t *buf = (const uint8_t *) edid;
-	uint8_t sum = 0;
+	edid->checksum = compute_checksum((uint8_t *) edid,
+					  sizeof(struct edid));
+}
 
-	/* calculate checksum */
-	for (i = 0; i < sizeof(struct edid) - 1; i++) {
-		sum = sum + buf[i];
-	}
+/**
+ * cea_sad_init_pcm:
+ * @channels: the number of supported channels (max. 8)
+ * @sampling_rates: bitfield of enum cea_sad_sampling_rate
+ * @sample_sizes: bitfield of enum cea_sad_pcm_sample_size
+ *
+ * Initialize a Short Audio Descriptor to advertise PCM support.
+ */
+void cea_sad_init_pcm(struct cea_sad *sad, int channels,
+		      uint8_t sampling_rates, uint8_t sample_sizes)
+{
+	assert(channels <= 8);
+	sad->format_channels = CEA_SAD_FORMAT_PCM << 3 | (channels - 1);
+	sad->sampling_rates = sampling_rates;
+	sad->bitrate = sample_sizes;
+}
+
+/**
+ * edid_ext_set_cea_sad: set an extension block to be CEA SAD
+ */
+void edid_ext_set_cea_sad(struct edid_ext *ext, const struct cea_sad *sads,
+			  size_t sads_len)
+{
+	struct edid_cea *cea = &ext->data.cea;
+	struct edid_cea_data_block *data_block;
+	size_t sads_size, data_block_size;
 
-	edid->checksum = 256 - sum;
+	memset(ext, 0, sizeof(struct edid_ext));
+
+	sads_size = sizeof(struct cea_sad) * sads_len;
+	data_block_size = sizeof(struct edid_cea_data_block) + sads_size;
+
+	ext->tag = EDID_EXT_CEA;
+
+	cea->revision = 3;
+	cea->dtd_start = 4 + data_block_size;
+	cea->misc = 1 << 6; /* basic audio, no DTD */
+
+	assert(sads_size <= 0xFF);
+	data_block = (struct edid_cea_data_block *) cea->data;
+	data_block->type_len = EDID_CEA_DATA_AUDIO << 5 | sads_size;
+	memcpy(data_block->data.sads, sads, sads_size);
+}
+
+void edid_ext_update_cea_checksum(struct edid_ext *ext)
+{
+	ext->data.cea.checksum = compute_checksum((uint8_t *) ext,
+						  sizeof(struct edid_ext));
 }
lib/igt_edid.h +82 -2

101 lines not on this page · raw message

Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
author
#2 lore raw

PATCH 2/7 lib/igt_edid: add support for Vendor Specific Data blocks

In reply to Simon Ser

For some reason HDMI audio won't work unless you cast a magic IEEE Registration Identifier alongside with its appropriate Components of Source Physical Address. The easiest way to do this is to capture a wild HDMI EDID, study it, and blindly copy bytes because you don't understand anything about their possible meaning (if any).

This commit also changes the SAD API exposed by igt_edid, to allow for both a SAD block and a VSD block to be included in the same CEA block.

---
 lib/igt_edid.c | 72 +++++++++++++++++++++++++++++++++++++++-----------
 lib/igt_edid.h | 23 ++++++++++++++--
 2 files changed, 78 insertions(+), 17 deletions(-)
lib/igt_edid.c +57 -15
index d01defb0..fbdb0c06 100644
@@ -292,30 +292,72 @@ void cea_sad_init_pcm(struct cea_sad *sad, int channels,
 }
 
 /**
- * edid_ext_set_cea_sad: set an extension block to be CEA SAD
+ * cea_vsd_get_hdmi_default:
+ *
+ * Returns the default Vendor Specific Data block for HDMI.
  */
-void edid_ext_set_cea_sad(struct edid_ext *ext, const struct cea_sad *sads,
-			  size_t sads_len)
+const struct cea_vsd *cea_vsd_get_hdmi_default(size_t *size)
 {
-	struct edid_cea *cea = &ext->data.cea;
-	struct edid_cea_data_block *data_block;
-	size_t sads_size, data_block_size;
+	static char raw[sizeof(struct cea_vsd) + 4] = {0};
+	struct cea_vsd *vsd;
+
+	*size = sizeof(raw);
+
+	/* Magic incantation. Works better if you orient your screen in the
+	 * direction of the VESA headquarters. */
+	vsd = (struct cea_vsd *) raw;
+	vsd->ieee_oui[0] = 0x03;
+	vsd->ieee_oui[1] = 0x0C;
+	vsd->ieee_oui[2] = 0x00;
+	vsd->data[0] = 0x10;
+	vsd->data[1] = 0x00;
+	vsd->data[2] = 0x38;
+	vsd->data[3] = 0x2D;
+
+	return vsd;
+}
+
+static void edid_cea_data_block_init(struct edid_cea_data_block *block,
+				     enum edid_cea_data_type type, size_t size)
+{
+	assert(size <= 0xFF);
+	block->type_len = type << 5 | size;
+}
 
-	memset(ext, 0, sizeof(struct edid_ext));
+size_t edid_cea_data_block_set_sad(struct edid_cea_data_block *block,
+				   const struct cea_sad *sads, size_t sads_len)
+{
+	size_t sads_size;
 
 	sads_size = sizeof(struct cea_sad) * sads_len;
-	data_block_size = sizeof(struct edid_cea_data_block) + sads_size;
+	edid_cea_data_block_init(block, EDID_CEA_DATA_AUDIO, sads_size);
+
+	memcpy(block->data.sads, sads, sads_size);
+
+	return sizeof(struct edid_cea_data_block) + sads_size;
+}
+
+size_t edid_cea_data_block_set_vsd(struct edid_cea_data_block *block,
+				   const struct cea_vsd *vsd, size_t vsd_size)
+{
+	edid_cea_data_block_init(block, EDID_CEA_DATA_VENDOR_SPECIFIC,
+				 vsd_size);
+
+	memcpy(block->data.vsds, vsd, vsd_size);
+
+	return sizeof(struct edid_cea_data_block) + vsd_size;
+}
+
+void edid_ext_set_cea(struct edid_ext *ext, size_t data_blocks_size,
+		      uint8_t flags)
+{
+	struct edid_cea *cea = &ext->data.cea;
 
 	ext->tag = EDID_EXT_CEA;
 
 	cea->revision = 3;
-	cea->dtd_start = 4 + data_block_size;
-	cea->misc = 1 << 6; /* basic audio, no DTD */
-
-	assert(sads_size <= 0xFF);
-	data_block = (struct edid_cea_data_block *) cea->data;
-	data_block->type_len = EDID_CEA_DATA_AUDIO << 5 | sads_size;
-	memcpy(data_block->data.sads, sads, sads_size);
+	cea->dtd_start = 4 + data_blocks_size;
+	cea->misc = flags; /* just flags, no DTD */
 }
 
 void edid_ext_update_cea_checksum(struct edid_ext *ext)
lib/igt_edid.h +21 -2
index 860ed929..790d1984 100644
@@ -189,6 +189,12 @@ struct cea_sad {
 	uint8_t bitrate;
 } __attribute__((packed));
 
+/* Vendor Specific Data */
+struct cea_vsd {
+	uint8_t ieee_oui[3];
+	char data[];
+};
+
 enum edid_cea_data_type {
 	EDID_CEA_DATA_AUDIO = 1,
 	EDID_CEA_DATA_VIDEO = 2,
@@ -200,9 +206,17 @@ struct edid_cea_data_block {
 	uint8_t type_len; /* type is from enum edid_cea_data_type */
 	union {
 		struct cea_sad sads[0];
+		struct cea_vsd vsds[0];
 	} data;
 } __attribute__((packed));
 
+enum edid_cea_flag {
+	EDID_CEA_YCBCR422 = 1 << 4,
+	EDID_CEA_YCBCR444 = 1 << 5,
+	EDID_CEA_BASIC_AUDIO = 1 << 6,
+	EDID_CEA_UNDERSCAN = 1 << 7,
+};
+
 struct edid_cea {
 	uint8_t revision;
 	uint8_t dtd_start;
@@ -275,8 +289,13 @@ void detailed_timing_set_string(struct detailed_timing *dt,
 
 void cea_sad_init_pcm(struct cea_sad *sad, int channels,
 		      uint8_t sampling_rates, uint8_t sample_sizes);
-void edid_ext_set_cea_sad(struct edid_ext *ext, const struct cea_sad *sads,
-			  size_t sads_len);
 void edid_ext_update_cea_checksum(struct edid_ext *ext);
+const struct cea_vsd *cea_vsd_get_hdmi_default(size_t *size);
+size_t edid_cea_data_block_set_sad(struct edid_cea_data_block *block,
+				   const struct cea_sad *sads, size_t sads_len);
+size_t edid_cea_data_block_set_vsd(struct edid_cea_data_block *block,
+				   const struct cea_vsd *vsd, size_t vsd_size);
+void edid_ext_set_cea(struct edid_ext *ext, size_t data_blocks_size,
+		      uint8_t flags);
 
 #endif
Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
author
#3 lore raw

PATCH 3/7 tests/kms_chamelium: generate an EDID with audio support

In reply to Simon Ser

The default Chamelium EDID works great with DisplayPort but has issues with HDMI. The EDID advertises itself as a DisplayPort-only device, which causes issues with HDMI audio. Additionally, the EDID doesn't contain a magic incantation within a vendor-specific data block that is needed for audio to work.

This patch makes it so an EDID is generated and set by IGT. The EDID is the base IGT EDID patched to append a Short Audio Descriptor and Vendor Specific Data block extension.

This generated is suitable for HDMI audio. For DisplayPort audio, we keep using the Chamelium's default EDID.

The global variable holding the test frequencies has been renamed to prevent shadowing local variables.

---
 lib/igt_chamelium.c   |   9 +++-
 tests/kms_chamelium.c | 123 ++++++++++++++++++++++++++++++------------
 2 files changed, 95 insertions(+), 37 deletions(-)
lib/igt_chamelium.c +7 -2
index ffc68f35..44445444 100644
@@ -38,6 +38,7 @@
 #include "igt_chamelium.h"
 #include "igt_core.h"
 #include "igt_aux.h"
+#include "igt_edid.h"
 #include "igt_frame.h"
 #include "igt_list.h"
 #include "igt_kms.h"
@@ -499,14 +500,18 @@ void chamelium_schedule_hpd_toggle(struct chamelium *chamelium,
  *
  * Returns: The ID of the EDID uploaded to the chamelium.
  */
-int chamelium_new_edid(struct chamelium *chamelium, const unsigned char *edid)
+int chamelium_new_edid(struct chamelium *chamelium,
+		       const unsigned char *raw_edid)
 {
 	xmlrpc_value *res;
 	struct chamelium_edid *allocated_edid;
 	int edid_id;
+	struct edid *edid = (struct edid *) raw_edid;
+	size_t edid_size = sizeof(struct edid) +
+			   edid->extensions_len * sizeof(struct edid_ext);
 
 	res = chamelium_rpc(chamelium, NULL, "CreateEdid", "(6)",
-			    edid, EDID_LENGTH);
+			    raw_edid, edid_size);
 
 	xmlrpc_read_int(&chamelium->env, res, &edid_id);
 	xmlrpc_DECREF(res);
tests/kms_chamelium.c +88 -35

265 lines not on this page · raw message

Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#4 lore raw

Re: [igt-dev] [PATCH i-g-t 3/7] tests/kms_chamelium: generate an EDID with audio support

Quoted 11 lines · Simon Ser

The default Chamelium EDID works great with DisplayPort but has issues with HDMI. The EDID advertises itself as a DisplayPort-only device, which causes issues with HDMI audio. Additionally, the EDID doesn't contain a magic incantation within a vendor-specific data block that is needed for audio to work.

This patch makes it so an EDID is generated and set by IGT. The EDID is the base IGT EDID patched to append a Short Audio Descriptor and Vendor Specific Data block extension.

This generated is suitable for HDMI audio. For DisplayPort audio, we keep using

^ EDID/one

Quoted 4 lines

the Chamelium's default EDID.

The global variable holding the test frequencies has been renamed to prevent shadowing local variables.

^ by

Quoted 29 lines
---
 lib/igt_chamelium.c   |   9 +++-
 tests/kms_chamelium.c | 123 ++++++++++++++++++++++++++++++------------
 2 files changed, 95 insertions(+), 37 deletions(-)
tests/kms_chamelium.c +4 -2
index 714e5e06..126af226 100644
@@ -1626,13 +1673,15 @@ igt_main
 			test_suspend_resume_edid_change(&data, port,
 							SUSPEND_STATE_MEM,
 							SUSPEND_TEST_NONE,
-							edid_id, alt_edid_id);
+							data.edid_id,
+							data.alt_edid_id);
 
 		connector_subtest("dp-edid-change-during-hibernate", DisplayPort)
 			test_suspend_resume_edid_change(&data, port,
 							SUSPEND_STATE_DISK,
 							SUSPEND_TEST_DEVICES,
-							edid_id, alt_edid_id);
+							data.edid_id,
+							data.alt_edid_id);
 
 		connector_subtest("dp-crc-single", DisplayPort)
 			test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,

tests/kms_chamelium.c igt_main · line 1704

Quoted 8 lines
tests/kms_chamelium.c +3 -1
@@ -1649,8 +1698,10 @@ igt_main
 		connector_subtest("dp-frame-dump", DisplayPort)
 			test_display_frame_dump(&data, port);
 
+		/* The EDID we generate advertises HDMI audio, not DP audio.
+		 * Use the Chamelium's default EDID for DP audio. */
 		connector_subtest("dp-audio", DisplayPort)
-			test_display_audio(&data, port, "HDMI");
+			test_display_audio(&data, port, "HDMI", 0);

#define CHAMELIUM_DEFAULT_EDID 0

or so

tests/kms_chamelium.c igt_main · line 1707

Quoted 3 lines
tests/kms_chamelium.c +0 -0
 	}
 
 	igt_subtest_group {

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#5 lore raw

PATCH 4/7 test/kms_chamelium: disable >48KHz audio tests

In reply to Simon Ser

These weren't tested on DisplayPort (because the Chamelium's default EDID doesn't advertise them) so this doesn't remove some test cases.

On HDMI they don't work reliably: sometimes no audio data is captured by the Chamelium. This needs to be investigated, but for now let's just disable them.

---
 tests/kms_chamelium.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
tests/kms_chamelium.c +5 -4
index 126af226..718e4aad 100644
@@ -725,14 +725,15 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
 /* A streak of 3 gives confidence that the signal is good. */
 #define MIN_STREAK 3
 
+/* TODO: enable >48KHz rates, these are not reliable */
 static int test_sampling_rates[] = {
 	32000,
 	44100,
 	48000,
-	88200,
-	96000,
-	176400,
-	192000,
+	/* 88200, */
+	/* 96000, */
+	/* 176400, */
+	/* 192000, */
 };
 
 static int test_sampling_rates_count = sizeof(test_sampling_rates) / sizeof(int);
Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
author
#6 lore raw

PATCH 5/7 tests/kms_chamelium: enable audio test on HDMI ports

In reply to Simon Ser

Now that we have all the required EDID bits in place, we can add a new hdmi-audio test.

---
 tests/kms_chamelium.c | 3 +++
 1 file changed, 3 insertions(+)
tests/kms_chamelium.c +3 -0
index 718e4aad..7e84cd1c 100644
@@ -1852,6 +1852,9 @@ igt_main
 
 		connector_subtest("hdmi-frame-dump", HDMIA)
 			test_display_frame_dump(&data, port);
+
+		connector_subtest("hdmi-audio", HDMIA)
+			test_display_audio(&data, port, "HDMI", data.edid_id);
 	}
 
 	igt_subtest_group {
Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#7 lore raw

Re: [igt-dev] [PATCH i-g-t 5/7] tests/kms_chamelium: enable audio test on HDMI ports

Quoted 13 lines · Simon Ser

Now that we have all the required EDID bits in place, we can add a new hdmi-audio test.

---
 tests/kms_chamelium.c | 3 +++
 1 file changed, 3 insertions(+)
tests/kms_chamelium.c +0 -0
index 718e4aad..7e84cd1c 100644

tests/kms_chamelium.c igt_main · line 1857

Quoted 6 lines
tests/kms_chamelium.c +3 -0
@@ -1852,6 +1852,9 @@ igt_main
 
 		connector_subtest("hdmi-frame-dump", HDMIA)
 			test_display_frame_dump(&data, port);
+
+		connector_subtest("hdmi-audio", HDMIA)
+			test_display_audio(&data, port, "HDMI", data.edid_id);

edid_hdmi_with_audio_id?

we will quite likely start having more of those anyway

Quoted 6 lines
tests/kms_chamelium.c +0 -0
 	}
 
 	igt_subtest_group {
Signature · 1 line
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#8 lore raw

PATCH 6/7 tests/kms_chamelium: don't abort audio test on first fail

In reply to Simon Ser

The audio test is repeated with a few different frequencies. When the test fails for one frequency, continue testing other frequencies so that we get a better understanding of the situation: is only one frequency failing, or are all of them failing?

---
 tests/kms_chamelium.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)
tests/kms_chamelium.c +23 -15
index 7e84cd1c..5efbee92 100644
@@ -794,15 +794,6 @@ do_test_display_audio(data_t *data, struct chamelium_port *port,
 	struct audio_state state = {};
 	int channel_mapping[8], capture_chan;
 
-	if (!alsa_test_output_configuration(alsa, playback_channels,
-					    playback_rate)) {
-		igt_debug("Skipping test with sample rate %d Hz and %d channels "
-			  "because at least one of the selected output devices "
-			  "doesn't support this configuration\n",
-			  playback_rate, playback_channels);
-		return false;
-	}
-
 	igt_debug("Testing with playback sampling rate %d Hz and %d channels\n",
 		  playback_rate, playback_channels);
 	alsa_configure_output(alsa, playback_channels, playback_rate);
@@ -981,15 +972,14 @@ do_test_display_audio(data_t *data, struct chamelium_port *port,
 	audio_signal_fini(signal);
 	chamelium_stream_deinit(stream);
 
-	igt_assert(success);
-	return true;
+	return success;
 }
 
 static void
 test_display_audio(data_t *data, struct chamelium_port *port,
 		   const char *audio_device, int edid_id)
 {
-	bool run = false;
+	bool run, success;
 	struct alsa *alsa;
 	int ret;
 	igt_output_t *output;
@@ -998,6 +988,7 @@ test_display_audio(data_t *data, struct chamelium_port *port,
 	drmModeModeInfo *mode;
 	drmModeConnector *connector;
 	int fb_id, i;
+	int channels, sampling_rate;
 
 	igt_require(alsa_has_exclusive_access());
 
@@ -1025,20 +1016,37 @@ test_display_audio(data_t *data, struct chamelium_port *port,
 
 	enable_output(data, port, output, mode, &fb);
 
+	run = false;
+	success = true;
 	for (i = 0; i < test_sampling_rates_count; i++) {
 		ret = alsa_open_output(alsa, audio_device);
 		igt_assert(ret >= 0);
 
 		/* TODO: playback on all 8 available channels */
-		run |= do_test_display_audio(data, port, alsa,
-					     PLAYBACK_CHANNELS,
-					     test_sampling_rates[i]);
+		channels = PLAYBACK_CHANNELS;
+		sampling_rate = test_sampling_rates[i];
+
+		if (!alsa_test_output_configuration(alsa, channels,
+						    sampling_rate)) {
+			igt_debug("Skipping test with sample rate %d Hz and %d channels "
+				  "because at least one of the selected output devices "
+				  "doesn't support this configuration\n",
+				  channels, sampling_rate);
+			continue;
+		}
+
+		run = true;
+
+		success &= do_test_display_audio(data, port, alsa, channels,
+						 sampling_rate);
 
 		alsa_close_output(alsa);
 	}
 
 	/* Make sure we tested at least one frequency. */
 	igt_assert(run);
+	/* Make sure all runs were successful. */
+	igt_assert(success);
 
 	igt_remove_fb(data->drm_fd, &fb);
 
Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
author
#9 lore raw

PATCH 7/7 HAX: add dp-audio test to fast-feedback

In reply to Simon Ser

Waiting for the whole series to be complete to decide whether or not we want this test in fast-feedback.

---
 tests/intel-ci/fast-feedback.testlist | 1 +
 1 file changed, 1 insertion(+)
tests/intel-ci/fast-feedback.testlist +1 -0
index 40475b1a..28f5fa55 100644
@@ -175,6 +175,7 @@ igt@kms_addfb_basic@unused-pitches
 igt@kms_busy@basic-flip-a
 igt@kms_busy@basic-flip-b
 igt@kms_busy@basic-flip-c
+igt@kms_chamelium@dp-audio
 igt@kms_chamelium@dp-hpd-fast
 igt@kms_chamelium@dp-edid-read
 igt@kms_chamelium@dp-crc-fast
Signature · 6 lines
2.21.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#10 lore raw

[igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_chamelium: add hdmi-audio test

In reply to Simon Ser
== Series Details ==

== Series Details ==

Series: tests/kms_chamelium: add hdmi-audio test
URL : https://patchwork.freedesktop.org/series/60003/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_6006 -> IGTPW_2929
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2929 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2929, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/60003/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2929:

### IGT changes ###

#### Possible regressions ####

* igt@kms_chamelium@hdmi-edid-read:
- fi-kbl-7567u: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6006/fi-kbl-7567u/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/fi-kbl-7567u/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_2929 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@i915_selftest@live_contexts:
- fi-bdw-gvtdvm: [PASS][3] -> [DMESG-FAIL][4] ([fdo#110235 ])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6006/fi-bdw-gvtdvm/igt@i915_selftest@live_contexts.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/fi-bdw-gvtdvm/igt@i915_selftest@live_contexts.html

* igt@i915_selftest@live_hangcheck:
- fi-icl-y: [PASS][5] -> [INCOMPLETE][6] ([fdo#107713] / [fdo#108569])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6006/fi-icl-y/igt@i915_selftest@live_hangcheck.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/fi-icl-y/igt@i915_selftest@live_hangcheck.html

* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: [PASS][7] -> [FAIL][8] ([fdo#103167])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6006/fi-byt-clapper/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/fi-byt-clapper/igt@[email protected]

[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235

Participating hosts (25 -> 24)
------------------------------

Additional (9): fi-hsw-peppy fi-skl-6770hq fi-skl-6260u fi-ilk-650 fi-hsw-4770 fi-bxt-j4205 fi-ivb-3770 fi-icl-dsi fi-skl-6600u
Missing (10): fi-kbl-soraka fi-ilk-m540 fi-skl-guc fi-byt-squawks fi-apl-guc fi-kbl-guc fi-kbl-8809g fi-bsw-kefka fi-byt-n2820 fi-skl-6700k2

Build changes
-------------

* IGT: IGT_4968 -> IGTPW_2929

CI_DRM_6006: f2b80d9616c3ced3d5e04bba276c4e57265faabb @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2929: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/
IGT_4968: caed251990f35bfe45368f803980071a73e36315 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Testlist changes ==

+igt@kms_chamelium@hdmi-audio

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#11 lore raw

Re: [igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_chamelium: add hdmi-audio test

Quoted 30 lines · Patchwork

== Series Details ==

Series: tests/kms_chamelium: add hdmi-audio test
URL : https://patchwork.freedesktop.org/series/60003/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_6006 -> IGTPW_2929
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2929 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2929, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/60003/revisions/1/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2929:

Quoted 8 lines

### IGT changes ###

#### Possible regressions ####

* igt@kms_chamelium@hdmi-edid-read:
- fi-kbl-7567u: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6006/fi-kbl-7567u/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2929/fi-kbl-7567u/igt@[email protected]

This is a real regression:

tests/kms_chamelium.c:1763
----------------------------------------------

connector_subtest("hdmi-edid-read", HDMIA) {
	test_edid_read(&data, port, data.edid_id,
		       igt_kms_get_base_edid());
	test_edid_read(&data, port, data.alt_edid_id,
		       igt_kms_get_alt_edid());
}

----------------------------------------------

data.edid_id is this new edid for HDMI, yet the blob we provide for comparison is the "base igt edid".

Having to pass both representations is rather error-prone.

I think we should just use IDs and when we are registering new EDID, we should store it in a map id -> EDID. Then such tests would take edid_id only, and retrieve the blob from the map.

Signature · 6 lines
Cheers,
Arek
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev