ASoC: ab8500: Mark expected switch fall-through
Subsystems (4)
Sasha Levin
maintainerPATCH 1/8 ASoC: ab8500: Mark expected switch fall-through
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 102cefc8e879b707be0024fdc7bce1deeb359a5f ]
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
In file included from sound/soc/codecs/ab8500-codec.c:24:sound/soc/codecs/ab8500-codec.c: In function ‘ab8500_codec_set_dai_fmt’:./include/linux/device.h:1485:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
_dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~sound/soc/codecs/ab8500-codec.c:2129:3: note: in expansion of macro ‘dev_err’
dev_err(dai->component->dev,
^~~~~~~sound/soc/codecs/ab8500-codec.c:2132:2: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
--- sound/soc/codecs/ab8500-codec.c | 1 + 1 file changed, 1 insertion(+)
sound/soc/codecs/ab8500-codec.c +1 -0
@@ -2131,6 +2131,7 @@ static int ab8500_codec_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)dev_err (dai->codec->dev,"%s: ERROR: The device is either a master or a slave.\n" , __func__); +/* fall through */ default : dev_err(dai->codec->dev, "%s: ERROR: Unsupporter master mask 0x%x\n",
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 2/8 ASoC:soc-pcm:fix a codec fixup issue in TDM case
From: Rander Wang <[email protected]>
[ Upstream commit 570f18b6a8d1f0e60e8caf30e66161b6438dcc91 ]
On HDaudio platforms, if playback is started when capture is working, there is no audible output.
This can be root-caused to the use of the rx|tx_mask to store an HDaudio stream tag.
If capture is stared before playback, rx_mask would be non-zero on HDaudio platform, then the channel number of playback, which is in the same codec dai with the capture, would be changed by soc_pcm_codec_params_fixup based on the tx_mask at first, then overwritten by this function based on rx_mask at last.
According to the author of tx|rx_mask, tx_mask is for playback and rx_mask is for capture. And stream direction is checked at all other references of tx|rx_mask in ASoC, so here should be an error. This patch checks stream direction for tx|rx_mask for fixup function.
This issue would affect not only HDaudio+ASoC, but also I2S codecs if the channel number based on rx_mask is not equal to the one for tx_mask. It could be rarely reproduecd because most drivers in kernel set the same channel number to tx|rx_mask or rx_mask is zero.
Tested on all platforms using stream_tag & HDaudio and intel I2S platforms.
--- sound/soc/soc-pcm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
sound/soc/soc-pcm.c +5 -2
@@ -847,10 +847,13 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, codec_params = *params;/* fixup params based on TDM slot masks */ -if (codec_dai->tx_mask) +if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK && + codec_dai->tx_mask)soc_pcm_codec_params_fixup (&codec_params, codec_dai->tx_mask); -if (codec_dai->rx_mask) + +if (substream->stream ==SNDRV_PCM_STREAM_CAPTURE && + codec_dai->rx_mask)soc_pcm_codec_params_fixup (&codec_params, codec_dai->rx_mask);
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 3/8 ASoC: cs4270: Set auto-increment bit for register writes
In reply to Sasha LevinFrom: Daniel Mack <[email protected]>
[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]
The CS4270 does not by default increment the register address on consecutive writes. During normal operation it doesn't matter as all register accesses are done individually. At resume time after suspend, however, the regcache code gathers the biggest possible block of registers to sync and sends them one on one go.
To fix this, set the INCR bit in all cases.
--- sound/soc/codecs/cs4270.c | 1 + 1 file changed, 1 insertion(+)
sound/soc/codecs/cs4270.c +1 -0
@@ -641,6 +641,7 @@ static const struct regmap_config cs4270_regmap = { .reg_defaults = cs4270_reg_defaults, .num_reg_defaults = ARRAY_SIZE(cs4270_reg_defaults), .cache_type = REGCACHE_RBTREE, + .write_flag_mask = CS4270_I2C_INCR, .readable_reg = cs4270_reg_is_readable, .volatile_reg = cs4270_reg_is_volatile,
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 4/8 ASoC: tlv320aic32x4: Fix Common Pins
In reply to Sasha LevinFrom: Annaliese McDermond <[email protected]>
[ Upstream commit c63adb28f6d913310430f14c69f0a2ea55eed0cc ]
The common pins were mistakenly not added to the DAPM graph. Adding these pins will allow valid graphs to be created.
--- sound/soc/codecs/tlv320aic32x4.c | 2 ++ 1 file changed, 2 insertions(+)
sound/soc/codecs/tlv320aic32x4.c +2 -0
@@ -234,6 +234,8 @@ static const struct snd_soc_dapm_widget aic32x4_dapm_widgets[] = {SND_SOC_DAPM_INPUT ("IN2_R" ),SND_SOC_DAPM_INPUT ("IN3_L" ),SND_SOC_DAPM_INPUT ("IN3_R" ), +SND_SOC_DAPM_INPUT ("CM_L" ), + SND_SOC_DAPM_INPUT("CM_R"), }; static const struct snd_soc_dapm_route aic32x4_dapm_routes[] = {
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 5/8 xtensa: fix initialization of pt_regs::syscall in start_thread
In reply to Sasha LevinFrom: Max Filippov <[email protected]>
[ Upstream commit 2663147dc7465cb29040a05cc4286fdd839978b5 ]
New pt_regs should indicate that there's no syscall, not that there's syscall #0. While at it wrap macro body in do/while and parenthesize macro arguments.
--- arch/xtensa/include/asm/processor.h | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
arch/xtensa/include/asm/processor.h +12 -9
@@ -152,15 +152,18 @@ struct thread_struct {/* Clearing a0 terminates the backtrace. */ #define start_thread (regs, new_pc, new_sp) \ - memset(regs, 0, sizeof(*regs)); \ - regs->pc = new_pc; \ - regs->ps = USER_PS_VALUE; \ - regs->areg[1] = new_sp; \ - regs->areg[0] = 0; \ - regs->wmask = 1; \ - regs->depc = 0; \ - regs->windowbase = 0; \ - regs->windowstart = 1; + do { \ + memset((regs), 0, sizeof(*(regs))); \ + (regs)->pc = (new_pc); \ + (regs)->ps = USER_PS_VALUE; \ + (regs)->areg[1] = (new_sp); \ + (regs)->areg[0] = 0; \ + (regs)->wmask = 1; \ + (regs)->depc = 0; \ + (regs)->windowbase = 0; \ + (regs)->windowstart = 1; \ + (regs)->syscall = NO_SYSCALL; \ + } while (0)/* Forward declaration */ struct task_struct ;
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 6/8 scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
In reply to Sasha LevinFrom: Varun Prakash <[email protected]>
[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]
If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done().
--- drivers/scsi/csiostor/csio_scsi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/csiostor/csio_scsi.c +4 -1
@@ -1737,8 +1737,11 @@ csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req) } out: -if (req->nsge >0 ) +if (req->nsge >0 ) {scsi_dma_unmap (cmnd); +if (req->dcopy && (host_status ==DID_OK )) + host_status =csio_scsi_copy_to_sgl (hw, req); + } cmnd->result = (((host_status) <<16 ) | scsi_status); cmnd->scsi_done (cmnd);
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 7/8 NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
In reply to Sasha LevinFrom: Tetsuo Handa <[email protected]>
[ Upstream commit 7c2bd9a39845bfb6d72ddb55ce737650271f6f96 ]
syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family (which is embedded into user-visible "struct nfs_mount_data" structure) despite nfs23_validate_mount_data() cannot pass sizeof(struct sockaddr_in6) bytes of AF_INET6 address to rpc_sockaddr2uaddr().
Since "struct nfs_mount_data" structure is user-visible, we can't change "struct nfs_mount_data" to use "struct sockaddr_storage". Therefore, assuming that everybody is using AF_INET family when passing address via "struct nfs_mount_data"->addr, reject if its sin_family is not AF_INET.
[1] https://syzkaller.appspot.com/bug?id=599993614e7cbbf66bc2656a919ab2a95fb5d75c
--- fs/nfs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/nfs/super.c +2 -1
@@ -2019,7 +2019,8 @@ static int nfs23_validate_mount_data(void *options,memcpy (sap, &data->addr,sizeof (data->addr)); args->nfs_server.addrlen =sizeof (data->addr); args->nfs_server.port =ntohs (data->addr.sin_port); -if (!nfs_verify_server_address (sap)) +if (sap->sa_family !=AF_INET || + !nfs_verify_server_address (sap)) goto out_no_address;if (!(data->flags &NFS_MOUNT_TCP ))
Signature · 1 line
2.19.1
Sasha Levin
maintainerPATCH 8/8 iommu/amd: Set exclusion range correctly
In reply to Sasha LevinFrom: Joerg Roedel <[email protected]>
[ Upstream commit 3c677d206210f53a4be972211066c0f1cd47fe12 ]
The exlcusion range limit register needs to contain the base-address of the last page that is part of the range, as bits 0-11 of this register are treated as 0xfff by the hardware for comparisons.
So correctly set the exclusion range in the hardware to the last page which is _in_ the range.
--- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/amd_iommu_init.c +1 -1
@@ -294,7 +294,7 @@ static void iommu_write_l2(struct amd_iommu *iommu, u8 address, u32 val)static void iommu_set_exclusion_range (struct amd_iommu *iommu) {u64 start = iommu->exclusion_start &PAGE_MASK ; -u64 limit = (start + iommu->exclusion_length) &PAGE_MASK ; +u64 limit = (start + iommu->exclusion_length -1 ) &PAGE_MASK ;u64 entry;if (!iommu->exclusion_start)
Signature · 1 line
2.19.1