vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach
Subsystems (3)
PATCH v3 1/1 vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach
When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev.
To reproduce:
* Gateway configuration:
ip link add dev vrf_258 type vrf table 258
ip link set dev enp0s9 master vrf_258
ip addr add 66:1/64 dev enp0s9
ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1
sysctl -w net.ipv6.conf.enp0s9.forwarding=1
* Sender configuration:
ip addr add 66::2/64 dev enp0s9
ip -6 route add default via 66::1
and ping 67::1 for example from the sender.
Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup.
v2: Fix typo of destination address in the repro steps.
v3: Simplify the loopback check (per David Ahern) and use reverse
Christmas tree format (per David Miller).
--- net/ipv6/route.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)
net/ipv6/route.c +17 -6
@@ -3668,23 +3668,34 @@ int ipv6_route_ioctl(struct net *net, unsigned int cmd, void __user *arg)static int ip6_pkt_drop (struct sk_buff *skb,u8 code,int ipstats_mib_noroutes) { -int type;struct dst_entry *dst =skb_dst (skb); +struct net *net =dev_net (dst->dev); +struct inet6_dev *idev; +int type; + +if (netif_is_l3_master (skb->dev) && + dst->dev == net->loopback_dev) + idev =__in6_dev_get_safely (dev_get_by_index_rcu (net,IP6CB (skb)->iif)); +else + idev =ip6_dst_idev (dst); +switch (ipstats_mib_noroutes) {case IPSTATS_MIB_INNOROUTES : type =ipv6_addr_type (&ipv6_hdr (skb)->daddr);if (type ==IPV6_ADDR_ANY ) { -IP6_INC_STATS (dev_net (dst->dev), -__in6_dev_get_safely (skb->dev), -IPSTATS_MIB_INADDRERRORS ); +IP6_INC_STATS (net, idev,IPSTATS_MIB_INADDRERRORS );break ; }/* FALLTHROUGH */ case IPSTATS_MIB_OUTNOROUTES : -IP6_INC_STATS (dev_net (dst->dev),ip6_dst_idev (dst), - ipstats_mib_noroutes); +IP6_INC_STATS (net, idev, ipstats_mib_noroutes);break ; } + +/* Start over by dropping the dst for l3mdev case */ +if (netif_is_l3_master (skb->dev)) +skb_dst_drop (skb); +icmpv6_send (skb,ICMPV6_DEST_UNREACH , code,0 );kfree_skb (skb);return 0 ;
Signature · 1 line
2.17.1
Quoted 27 lines · Stephen Suryaputra
When there is no route to an IPv6 dest addr,
skb_dst(skb)points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail onicmpv6_send()and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev.To reproduce:
* Gateway configuration:
ip link add devvrf_258type vrf table 258
ip link set dev enp0s9 mastervrf_258
ip addr add 66:1/64 dev enp0s9
ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1
sysctl -w net.ipv6.conf.enp0s9.forwarding=1
* Sender configuration:
ip addr add 66::2/64 dev enp0s9
ip -6 route add default via 66::1
and ping 67::1 for example from the sender.Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup.
v2: Fix typo of destination address in the repro steps.
v3: Simplify the loopback check (per David Ahern) and use reverse
Christmas tree format (per David Miller).
Quoted 7 lines
Signed-off-by Stephen Suryaputra <[email protected]>Reviewed-by David Ahern <[email protected]>Tested-by David Ahern <[email protected]>--- net/ipv6/route.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)
From: Stephen Suryaputra <[email protected]>
Date: Sat, 27 Apr 2019 09:14:33 -0400
Quoted 6 lines
When there is no route to an IPv6 dest addr,
skb_dst(skb)points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail onicmpv6_send()and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev.
...
Quoted 10 lines
Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup.
v2: Fix typo of destination address in the repro steps.
v3: Simplify the loopback check (per David Ahern) and use reverse
Christmas tree format (per David Miller).Signed-off-by Stephen Suryaputra <[email protected]>Reviewed-by David Ahern <[email protected]>Tested-by David Ahern <[email protected]>
Applied, thanks.