Skip to contentSkip to conversation

arm: dts: add missing vexpress device trees

PATCH New Heinrich Schuchardt 2 participants 2 messages Apr 21, 2019 – Apr 27, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: dts: add missing vexpress device trees

Add the device trees for

* vexpress_ca5x2_defconfig
* vexpress_ca9x4_defconfig
* vexpress_ca15_tc2_defconfig

as available in Linux 5.1 rc5.

We are using the vexpress_ca15_tc2_defconfig and vexpress_ca9x4_defconfig for Travis testing via QEMU.

The UEFI base Embedded Base Boot Requirements Specification (EBBR) requires that an embedded board either provides a device tree or an ACPI table.

All block devices are meant to be moved to the driver model. On ARM this requires a device tree.

---
 arch/arm/dts/Makefile                 |   4 +
 arch/arm/dts/vexpress-v2m-rs1.dtsi    | 437 +++++++++++++++++
 arch/arm/dts/vexpress-v2m.dtsi        | 451 +++++++++++++++++
 arch/arm/dts/vexpress-v2p-ca15_a7.dts | 682 ++++++++++++++++++++++++++
 arch/arm/dts/vexpress-v2p-ca5s.dts    | 280 +++++++++++
 arch/arm/dts/vexpress-v2p-ca9.dts     | 368 ++++++++++++++
 6 files changed, 2222 insertions(+)
 create mode 100644 arch/arm/dts/vexpress-v2m-rs1.dtsi
 create mode 100644 arch/arm/dts/vexpress-v2m.dtsi
 create mode 100644 arch/arm/dts/vexpress-v2p-ca15_a7.dts
 create mode 100644 arch/arm/dts/vexpress-v2p-ca5s.dts
 create mode 100644 arch/arm/dts/vexpress-v2p-ca9.dts
arch/arm/dts/Makefile +4 -0
index 0aee8dfde0..23a19f90b2 100644
@@ -712,6 +712,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_TARGET_GE_BX50V3) += imx6q-bx50v3.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
 
+dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
+
 targets += $(dtb-y)
 
 # Add any required device tree compiler flags here
arch/arm/dts/vexpress-v2m-rs1.dtsi new file +437 -0

437 lines not on this page · raw message

arch/arm/dts/vexpress-v2m.dtsi new file +451 -0

452 lines not on this page · raw message

arch/arm/dts/vexpress-v2p-ca15_a7.dts new file +682 -0

682 lines not on this page · raw message

arch/arm/dts/vexpress-v2p-ca5s.dts new file +280 -0

280 lines not on this page · raw message

arch/arm/dts/vexpress-v2p-ca9.dts new file +368 -0

368 lines not on this page · raw message

--
2.20.1

#1 lore raw

PATCH 1/1 arm: dts: add missing vexpress device trees

Quoted 11 lines · Heinrich Schuchardt

Add the device trees for

* vexpress_ca5x2_defconfig
* vexpress_ca9x4_defconfig
* vexpress_ca15_tc2_defconfig

as available in Linux 5.1 rc5.

We are using the vexpress_ca15_tc2_defconfig and vexpress_ca9x4_defconfig for Travis testing via QEMU.

Quoted 7 lines

The UEFI base Embedded Base Boot Requirements Specification (EBBR) requires that an embedded board either provides a device tree or an ACPI table.

All block devices are meant to be moved to the driver model. On ARM this requires a device tree.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190427/6fbda37c/attachment.sig>