Skip to contentSkip to conversation

Add support for HiFive Unleashed board

PATCH New Mark Corbin 1 participant 4 messages Apr 28, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover Add support for HiFive Unleashed board

Hello

I've regenerated the patches to add support for the SiFive HiFive Unleashed board. I tried to add support for a 5.0 series kernel, but couldn't get the system to boot. This needs further investigation, so I've gone with my original plan to use the 4.20.17 kernel. I've created a new github repository for the patched kernel. This will eventually be deprecated in favour of a 5.0 or 5.1 series kernel.

Changes v1 -> v2:
- moved generation of bbl binary file in riscv-pk.mk from INSTALL_CMDS to BUILD_CMDS (Arnout)
- added new patch to modify riscv-pk build scripts to remove hardcoding of ABI.
- removed the large kernel patch and replaced it with a custom git repository (Arnout)
- reduced the kernel config fragment to a minimum (Arnout)
- use a separate root filesystem instead of a linked-in initramfs image (Arnout)
- changed naming convention from sifive-u540* to sifive_hifive* (Arnout)
- added post-image script to generate a complete SD card image file (Arnout)
- updated the default configuration to make use of compressed instructions and the lp64d ABI for builds.
- updated the DEVELOPERS file.

Regards

Mark

Mark Corbin (3):
boot/riscv-pk: add generation of binary bbl file boot/riscv-pk: remove hardcoding of the ABI board/sifive: add support for the HiFive Unleashed board

 DEVELOPERS                                    |  1 +
 .../hifive-unleashed/linux.config.fragment    | 14 ++++
 board/sifive/hifive-unleashed/post-image.sh   | 37 ++++++++++
 board/sifive/hifive-unleashed/readme.txt      | 65 +++++++++++++++++
 ...-specify-ABI-or-use-compiler-default.patch | 72 +++++++++++++++++++
 boot/riscv-pk/riscv-pk.mk                     |  7 +-
 configs/sifive_hifive_unleashed_defconfig     | 31 ++++++++
 7 files changed, 225 insertions(+), 2 deletions(-)
 create mode 100644 board/sifive/hifive-unleashed/linux.config.fragment
 create mode 100755 board/sifive/hifive-unleashed/post-image.sh
 create mode 100644 board/sifive/hifive-unleashed/readme.txt
 create mode 100644 boot/riscv-pk/0001-Add-ability-to-specify-ABI-or-use-compiler-default.patch
 create mode 100644 configs/sifive_hifive_unleashed_defconfig
Signature · 1 line
2.19.1
#1 lore raw

PATCH v2 1/3 boot/riscv-pk: add generation of binary bbl file

In order to support the SiFive HiFive Unleashed board we need to generate a binary bootloader file ready for writing to an SD card.

---
Changes v1 -> v2:
- moved generation of bbl binary file in riscv-pk.mk from INSTALL_CMDS to BUILD_CMDS (Arnout)

---
 boot/riscv-pk/riscv-pk.mk | 2 ++
 1 file changed, 2 insertions(+)
boot/riscv-pk/riscv-pk.mk +2 -0
index 0ab5879ee4..8386dfe168 100644
@@ -23,10 +23,12 @@ endef
 
 define RISCV_PK_BUILD_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/build bbl
+	$(TARGET_OBJCOPY) -S -O binary $(@D)/build/bbl $(@D)/build/bbl.bin
 endef
 
 define RISCV_PK_INSTALL_IMAGES_CMDS
 	$(INSTALL) -D -m 0755 $(@D)/build/bbl $(BINARIES_DIR)/bbl
+	$(INSTALL) -D -m 0755 $(@D)/build/bbl.bin $(BINARIES_DIR)/bbl.bin
 endef
 
 $(eval $(generic-package))
Signature · 1 line
2.19.1
#2 lore raw

PATCH v2 2/3 boot/riscv-pk: remove hardcoding of the ABI

In reply to Mark Corbin

The riscv-pk package is currently hardcoded to always use the softfloat ABI when compiling, i.e. ilp32 for 32-bit and lp64 for 64-bit. The SiFive HiFive Unleashed board has hardware floating point support, so we need to be able to build riscv-pk with both softfloat and hardfloat toolchains.

This patch adds the ability to specify the ABI via --with-abi when configuring riscv-pk. If this option is not provided then the compiler default ABI setting will be used instead.

---
 ...-specify-ABI-or-use-compiler-default.patch | 72 +++++++++++++++++++
 boot/riscv-pk/riscv-pk.mk                     |  5 +-
 2 files changed, 75 insertions(+), 2 deletions(-)
 create mode 100644 boot/riscv-pk/0001-Add-ability-to-specify-ABI-or-use-compiler-default.patch
boot/riscv-pk/0001-Add-ability-to-specify-ABI-or-use-compiler-default.patch new file +72 -0
new file mode 100644
index 0000000000..3cee9a4fd6
@@ -0,0 +1,72 @@
+From 0f7e2c2f61c6bb36a33733e89ec8d79f89d618ae Mon Sep 17 00:00:00 2001
+From: Mark Corbin <[email protected]>
+Date: Thu, 18 Apr 2019 12:07:02 +0100
+Subject: [PATCH] Add ability to specify ABI or use compiler default
+
+Allow the ABI to be defined using --with-abi. If this option is
+not provided then the compiler default ABI setting will be used.
+
+Signed-off-by: Mark Corbin <[email protected]>
+---
+ Makefile.in  | 15 +++++++++++----
+ configure.ac |  4 ++++
+ 2 files changed, 15 insertions(+), 4 deletions(-)
+
+diff --git a/Makefile.in b/Makefile.in
+index aeabdc2..d6b988f 100644
+--- a/Makefile.in
++++ b/Makefile.in
+@@ -51,8 +51,7 @@ else
+ endif
+ 
+ # If --with-arch is not specified, it defaults to whatever the compiler's
+-# default is. The -with-abi is not necessary for this project. Unconditionally
+-# compile it with a no-float ABI. i.e., ilp32 for 32-bit and lp64 for 64-bit.
++# default is.
+ 
+ ifeq (@WITH_ARCH@,)
+   march := -march=$(shell @CC@ -v 2>&1 | \
+@@ -60,8 +59,16 @@ ifeq (@WITH_ARCH@,)
+ else
+   march := -march=@WITH_ARCH@
+ endif
+-is_32bit := $(findstring 32,$(march))
+-mabi := -mabi=$(if $(is_32bit),ilp32,lp64)
++
++# If --with-abi is not specified, it defaults to whatever the compiler's
++# default is.
++
++ifeq (@WITH_ABI@,)
++  mabi := -mabi=$(shell @CC@ -v 2>&1 | \
++                    sed 's/ /\n/g' | grep with-abi | awk -F= '{print $$2}')
++else
++  mabi := -mabi=@WITH_ABI@
++endif
+ 
+ # Installation directories
+ 
+diff --git a/configure.ac b/configure.ac
+index 917179f..180a8db 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -83,6 +83,9 @@ AC_ARG_VAR(RISCV, [top-level RISC-V install directory])
+ AC_ARG_WITH([arch], AS_HELP_STRING([--with-arch], [Set the RISC-V architecture]),
+   [AC_SUBST([WITH_ARCH], $with_arch, [Specify architecture to build the project])])
+ 
++AC_ARG_WITH([abi], AS_HELP_STRING([--with-abi], [Set the RISC-V ABI]),
++  [AC_SUBST([WITH_ABI], $with_abi, [Specify ABI to build the project])])
++
+ AC_ARG_ENABLE([print-device-tree], AS_HELP_STRING([--enable-print-device-tree], [Print DTS when booting]))
+ AS_IF([test "x$enable_print_device_tree" == "xyes"], [
+   AC_DEFINE([PK_PRINT_DEVICE_TREE],,[Define if the DTS is to be displayed])
+@@ -95,6 +98,7 @@ AC_SUBST(CFLAGS)
+ AC_SUBST(LDFLAGS)
+ AC_SUBST([LIBS], ["-lgcc"])
+ AC_SUBST(WITH_ARCH)
++AC_SUBST(WITH_ABI)
+ AC_SUBST(host_alias)
+ 
+ #-------------------------------------------------------------------------
+-- 
+2.19.1
+
boot/riscv-pk/riscv-pk.mk +3 -2
index 8386dfe168..f82520d221 100644
@@ -9,8 +9,9 @@ RISCV_PK_SITE = git://github.com/riscv/riscv-pk.git
 RISCV_PK_LICENSE = BSD-3-Clause
 RISCV_PK_LICENSE_FILES = LICENSE
 RISCV_PK_DEPENDENCIES = linux
-RISCV_PK_SUBDIR = build
+RISCV_PK_INSTALL_TARGET = NO
 RISCV_PK_INSTALL_IMAGES = YES
+RISCV_PK_AUTORECONF = YES
 
 define RISCV_PK_CONFIGURE_CMDS
 	mkdir -p $(@D)/build
@@ -31,4 +32,4 @@ define RISCV_PK_INSTALL_IMAGES_CMDS
 	$(INSTALL) -D -m 0755 $(@D)/build/bbl.bin $(BINARIES_DIR)/bbl.bin
 endef
 
-$(eval $(generic-package))
+$(eval $(autotools-package))
Signature · 1 line
2.19.1
#3 lore raw

PATCH v2 3/3 board/sifive: add support for the HiFive Unleashed board

In reply to Mark Corbin

This patch adds basic support for the SiFive HiFive Unleashed board.

---
Changes v1 -> v2:
- removed the large kernel patch and replaced it with a custom git repository (Arnout)
- reduced the kernel config fragment to a minimum (Arnout)
- use a separate root filesystem instead of a linked-in initramfs image (Arnout)
- changed naming convention from sifive-u540* to sifive_hifive* (Arnout)
- added post-image script to generate a complete SD card image file (Arnout)
- updated the default configuration to make use of compressed instructions and the lp64d ABI for builds.
- updated the DEVELOPERS file.

---
 DEVELOPERS                                    |  1 +
 .../hifive-unleashed/linux.config.fragment    | 14 ++++
 board/sifive/hifive-unleashed/post-image.sh   | 37 +++++++++++
 board/sifive/hifive-unleashed/readme.txt      | 65 +++++++++++++++++++
 configs/sifive_hifive_unleashed_defconfig     | 31 +++++++++
 5 files changed, 148 insertions(+)
 create mode 100644 board/sifive/hifive-unleashed/linux.config.fragment
 create mode 100755 board/sifive/hifive-unleashed/post-image.sh
 create mode 100644 board/sifive/hifive-unleashed/readme.txt
 create mode 100644 configs/sifive_hifive_unleashed_defconfig
DEVELOPERS +1 -0
index 56556413aa..5f76b6951d 100644
@@ -1417,6 +1417,7 @@ F:	arch/arch.mk.riscv
 F:	arch/Config.in.riscv
 F:	board/qemu/riscv32-virt/
 F:	board/qemu/riscv64-virt/
+F:	board/sifive/
 F:	boot/riscv-pk/
 F:	configs/qemu_riscv32_virt_defconfig
 F:	configs/qemu_riscv64_virt_defconfig
board/sifive/hifive-unleashed/linux.config.fragment new file +14 -0
new file mode 100644
index 0000000000..8957eb5d36
@@ -0,0 +1,14 @@
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlyprintk console=ttySIF0,115200 root=/dev/mmcblk0p2 rootwait"
+CONFIG_SERIAL_SIFIVE=y
+CONFIG_SERIAL_SIFIVE_CONSOLE=y
+# CONFIG_HVC_RISCV_SBI is not set
+CONFIG_SPI=y
+CONFIG_SPI_SIFIVE=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SIFIVE=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_CLK_U54_PRCI=y
+CONFIG_CLK_GEMGXL_MGMT=y
+CONFIG_SIFIVE_PLIC=y
board/sifive/hifive-unleashed/post-image.sh new file +37 -0
new file mode 100755
index 0000000000..ed2461995b
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+set -e
+
+cd ${BINARIES_DIR}
+
+# GPT partition codes
+KERNEL=2E54B353-1271-4842-806F-E436D6AF6985
+ROOTFS=0FC63DAF-8483-4772-8E79-3D69D8477DE4
+
+# Partition offsets and sizes
+KERNEL_PART_START=2048
+KERNEL_PART_SIZE=65536
+KERNEL_PART_END=$(( KERNEL_PART_START + KERNEL_PART_SIZE - 1 ))
+ROOTFS_PART_START=$(( KERNEL_PART_END + 1 )) 
+ROOTFS_PART_SIZE=$(( $(stat -c %s rootfs.ext2) / 512 ))
+ROOTFS_PART_END=$(( ROOTFS_PART_START + ROOTFS_PART_SIZE - 1 ))
+GPT_SIZE=34
+
+# Disk image size
+IMAGE_SIZE=$(( GPT_SIZE + ROOTFS_PART_END + 1 ))
+
+# Create an empty SD image
+dd if=/dev/zero of=sdcard.img bs=512 count=0 seek=$IMAGE_SIZE
+
+sgdisk --clear \
+        --new=1:${KERNEL_PART_START}:${KERNEL_PART_END} \
+        --change-name=1:kernel \
+        --typecode=1:${KERNEL} \
+        --new=2:${ROOTFS_PART_START}:${ROOTFS_PART_END} \
+        --change-name=2:rootfs \
+        --typecode=2:${ROOTFS} \
+        sdcard.img
+
+dd if=bbl.bin of=sdcard.img bs=512 count=$KERNEL_PART_SIZE seek=$KERNEL_PART_START conv=notrunc
+dd if=rootfs.ext2 of=sdcard.img bs=512 count=$ROOTFS_PART_SIZE seek=$ROOTFS_PART_START conv=notrunc
+
board/sifive/hifive-unleashed/readme.txt new file +65 -0

65 lines not on this page · raw message

configs/sifive_hifive_unleashed_defconfig new file +31 -0
new file mode 100644
index 0000000000..715402339f
@@ -0,0 +1,31 @@
+# Architecture
+BR2_riscv=y
+BR2_riscv_custom=y
+BR2_RISCV_ISA_CUSTOM_RVM=y
+BR2_RISCV_ISA_CUSTOM_RVF=y
+BR2_RISCV_ISA_CUSTOM_RVD=y
+BR2_RISCV_ISA_CUSTOM_RVC=y
+BR2_RISCV_64=y
+BR2_RISCV_ABI_LP64D=y
+
+# Linux headers same as kernel, a 4.20 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_20=y
+
+# System
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/sifive/hifive-unleashed/post-image.sh"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/markcorbinuk/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="hifive-4.20.17"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sifive/hifive-unleashed/linux.config.fragment"
+BR2_LINUX_KERNEL_VMLINUX=y
+
+# Bootloader
+BR2_TARGET_RISCV_PK=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
Signature · 1 line
2.19.1