ath9k: Don't trust TX status TID number when reporting airtime
PATCH 1/1 ath9k: Don't trust TX status TID number when reporting airtime
As already noted a comment in ath_tx_complete_aggr(), the hardware will occasionally send a TX status with the wrong tid number. If we trust the value, airtime usage will be reported to the wrong AC, which can cause the deficit on that AC to become very low, blocking subsequent attempts to transmit.
To fix this, account airtime usage to the TID number from the original skb, instead of the one in the hardware TX status report.
---
I haven't been able to confirm that this also affects the old in-driver airtime scheduler, but I suspect it does, so I'll send a follow-up patch to stable once this has been merged.
drivers/net/wireless/ath/ath9k/xmit.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath9k/xmit.c +4 -3
@@ -668,7 +668,8 @@ static bool bf_is_ampdu_not_probing(struct ath_buf *bf)static void ath_tx_count_airtime (struct ath_softc *sc,struct ieee80211_sta *sta,struct ath_buf *bf, -struct ath_tx_status *ts) +struct ath_tx_status *ts, +u8 tid) {u32 airtime =0 ;int i;
@@ -679,7 +680,7 @@ static void ath_tx_count_airtime(struct ath_softc *sc, airtime += rate_dur * bf->rates[i].count; } -ieee80211_sta_register_airtime (sta, ts->tid, airtime,0 ); +ieee80211_sta_register_airtime (sta, tid, airtime,0 ); } static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
@@ -709,7 +710,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,if (sta) {struct ath_node *an = (struct ath_node *)sta->drv_priv; tid =ath_get_skb_tid (sc, an, bf->bf_mpdu); -ath_tx_count_airtime (sc, sta, bf, ts); +ath_tx_count_airtime (sc, sta, bf, ts, tid->tidno);if (ts->ts_status & (ATH9K_TXERR_FILT |ATH9K_TXERR_XRETRY )) tid->clear_ps_filter = true; }
Signature · 1 line
2.21.0
Quoted 6 lines · Toke Høiland-Jørgensen
As already noted a comment in
ath_tx_complete_aggr(), the hardware will occasionally send a TX status with the wrong tid number. If we trust the value, airtime usage will be reported to the wrong AC, which can cause the deficit on that AC to become very low, blocking subsequent attempts to transmit.
Quoted 6 lines
To fix this, account airtime usage to the TID number from the original skb, instead of the one in the hardware TX status report.
Reported-by Miguel Catalan Cid <[email protected]>Signed-off-by Toke Høiland-Jørgensen <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
389b72e58259 ath9k: Don't trust TX status TID number when reporting airtime
Signature · 3 lines
https://patchwork.kernel.org/patch/10843731/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches