regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
Subsystems (2)
PATCH 1/2 regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
Just use rdev->desc instead.
--- drivers/regulator/stm32-pwr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/regulator/stm32-pwr.c +3 -5
@@ -40,7 +40,6 @@ static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {struct stm32_pwr_reg {void __iomem *base; -const struct regulator_desc *desc;u32 ready_mask; };
@@ -61,7 +60,7 @@ static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev) val =readl_relaxed (priv->base +REG_PWR_CR3 ); -return (val & priv->desc->enable_mask); +return (val & rdev->desc->enable_mask); }static int stm32_pwr_reg_enable (struct regulator_dev *rdev)
@@ -71,7 +70,7 @@ static int stm32_pwr_reg_enable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val |= priv->desc->enable_mask; + val |= rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -90,7 +89,7 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val &= ~priv->desc->enable_mask; + val &= ~rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -153,7 +152,6 @@ static int stm32_pwr_regulator_probe(struct platform_device *pdev)if (!priv)return -ENOMEM ; priv->base = base; - priv->desc = &stm32_pwr_desc[i]; priv->ready_mask = ready_mask_table[i]; config.driver_data = priv;
Signature · 1 line
2.17.1
PATCH 2/2 regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
For fixed regulator, setting .n_voltages = 1 and .fixed_uV is enough, no need to set .min_uV and .list_volage.
--- drivers/regulator/stm32-pwr.c | 2 -- 1 file changed, 2 deletions(-)
drivers/regulator/stm32-pwr.c +0 -2
@@ -102,7 +102,6 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev) }static const struct regulator_ops stm32_pwr_reg_ops = { - .list_voltage = regulator_list_voltage_linear, .enable = stm32_pwr_reg_enable, .disable = stm32_pwr_reg_disable, .is_enabled = stm32_pwr_reg_is_enabled,
@@ -115,7 +114,6 @@ static const struct regulator_ops stm32_pwr_reg_ops = { .of_match = of_match_ptr(_name), \ .n_voltages = 1, \ .type = REGULATOR_VOLTAGE, \ - .min_uV = _volt, \ .fixed_uV = _volt, \ .ops = &stm32_pwr_reg_ops, \ .enable_mask = _en, \
Signature · 1 line
2.17.1
Mark Brown
maintainerApplied "regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage" to the regulator tree
The patch
regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 311a68a51a58bfdead971080d41a34ca565b47a0 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 30 Apr 2019 19:13:46 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded .min_uV and
.list_volage
For fixed regulator, setting .n_voltages = 1 and .fixed_uV is enough, no need to set .min_uV and .list_volage.
--- drivers/regulator/stm32-pwr.c | 2 -- 1 file changed, 2 deletions(-)
drivers/regulator/stm32-pwr.c +0 -2
@@ -102,7 +102,6 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev) }static const struct regulator_ops stm32_pwr_reg_ops = { - .list_voltage = regulator_list_voltage_linear, .enable = stm32_pwr_reg_enable, .disable = stm32_pwr_reg_disable, .is_enabled = stm32_pwr_reg_is_enabled,
@@ -115,7 +114,6 @@ static const struct regulator_ops stm32_pwr_reg_ops = { .of_match = of_match_ptr(_name), \ .n_voltages = 1, \ .type = REGULATOR_VOLTAGE, \ - .min_uV = _volt, \ .fixed_uV = _volt, \ .ops = &stm32_pwr_reg_ops, \ .enable_mask = _en, \
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage" to the regulator tree
In reply to Axel LinThe patch
regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 311a68a51a58bfdead971080d41a34ca565b47a0 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 30 Apr 2019 19:13:46 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded .min_uV and
.list_volage
For fixed regulator, setting .n_voltages = 1 and .fixed_uV is enough, no need to set .min_uV and .list_volage.
--- drivers/regulator/stm32-pwr.c | 2 -- 1 file changed, 2 deletions(-)
drivers/regulator/stm32-pwr.c +0 -2
@@ -102,7 +102,6 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev) }static const struct regulator_ops stm32_pwr_reg_ops = { - .list_voltage = regulator_list_voltage_linear, .enable = stm32_pwr_reg_enable, .disable = stm32_pwr_reg_disable, .is_enabled = stm32_pwr_reg_is_enabled,
@@ -115,7 +114,6 @@ static const struct regulator_ops stm32_pwr_reg_ops = { .of_match = of_match_ptr(_name), \ .n_voltages = 1, \ .type = REGULATOR_VOLTAGE, \ - .min_uV = _volt, \ .fixed_uV = _volt, \ .ops = &stm32_pwr_reg_ops, \ .enable_mask = _en, \
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage" to the regulator tree
In reply to Axel LinThe patch
regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 311a68a51a58bfdead971080d41a34ca565b47a0 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 30 Apr 2019 19:13:46 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded .min_uV and
.list_volage
For fixed regulator, setting .n_voltages = 1 and .fixed_uV is enough, no need to set .min_uV and .list_volage.
--- drivers/regulator/stm32-pwr.c | 2 -- 1 file changed, 2 deletions(-)
drivers/regulator/stm32-pwr.c +0 -2
@@ -102,7 +102,6 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev) }static const struct regulator_ops stm32_pwr_reg_ops = { - .list_voltage = regulator_list_voltage_linear, .enable = stm32_pwr_reg_enable, .disable = stm32_pwr_reg_disable, .is_enabled = stm32_pwr_reg_is_enabled,
@@ -115,7 +114,6 @@ static const struct regulator_ops stm32_pwr_reg_ops = { .of_match = of_match_ptr(_name), \ .n_voltages = 1, \ .type = REGULATOR_VOLTAGE, \ - .min_uV = _volt, \ .fixed_uV = _volt, \ .ops = &stm32_pwr_reg_ops, \ .enable_mask = _en, \
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg" to the regulator tree
In reply to Axel LinThe patch
regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 7bcbdbe01fa82712f8fece2a07ea30758b76403d Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 30 Apr 2019 19:13:45 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded *desc from struct
stm32_pwr_reg
Just use rdev->desc instead.
--- drivers/regulator/stm32-pwr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/regulator/stm32-pwr.c +3 -5
@@ -40,7 +40,6 @@ static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {struct stm32_pwr_reg {void __iomem *base; -const struct regulator_desc *desc;u32 ready_mask; };
@@ -61,7 +60,7 @@ static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev) val =readl_relaxed (priv->base +REG_PWR_CR3 ); -return (val & priv->desc->enable_mask); +return (val & rdev->desc->enable_mask); }static int stm32_pwr_reg_enable (struct regulator_dev *rdev)
@@ -71,7 +70,7 @@ static int stm32_pwr_reg_enable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val |= priv->desc->enable_mask; + val |= rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -90,7 +89,7 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val &= ~priv->desc->enable_mask; + val &= ~rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -153,7 +152,6 @@ static int stm32_pwr_regulator_probe(struct platform_device *pdev)if (!priv)return -ENOMEM ; priv->base = base; - priv->desc = &stm32_pwr_desc[i]; priv->ready_mask = ready_mask_table[i]; config.driver_data = priv;
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg" to the regulator tree
In reply to Axel LinThe patch
regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 7bcbdbe01fa82712f8fece2a07ea30758b76403d Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 30 Apr 2019 19:13:45 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded *desc from struct
stm32_pwr_reg
Just use rdev->desc instead.
--- drivers/regulator/stm32-pwr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/regulator/stm32-pwr.c +3 -5
@@ -40,7 +40,6 @@ static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {struct stm32_pwr_reg {void __iomem *base; -const struct regulator_desc *desc;u32 ready_mask; };
@@ -61,7 +60,7 @@ static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev) val =readl_relaxed (priv->base +REG_PWR_CR3 ); -return (val & priv->desc->enable_mask); +return (val & rdev->desc->enable_mask); }static int stm32_pwr_reg_enable (struct regulator_dev *rdev)
@@ -71,7 +70,7 @@ static int stm32_pwr_reg_enable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val |= priv->desc->enable_mask; + val |= rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -90,7 +89,7 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val &= ~priv->desc->enable_mask; + val &= ~rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -153,7 +152,6 @@ static int stm32_pwr_regulator_probe(struct platform_device *pdev)if (!priv)return -ENOMEM ; priv->base = base; - priv->desc = &stm32_pwr_desc[i]; priv->ready_mask = ready_mask_table[i]; config.driver_data = priv;
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg" to the regulator tree
In reply to Axel LinThe patch
regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 7bcbdbe01fa82712f8fece2a07ea30758b76403d Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 30 Apr 2019 19:13:45 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded *desc from struct
stm32_pwr_reg
Just use rdev->desc instead.
--- drivers/regulator/stm32-pwr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/regulator/stm32-pwr.c +3 -5
@@ -40,7 +40,6 @@ static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {struct stm32_pwr_reg {void __iomem *base; -const struct regulator_desc *desc;u32 ready_mask; };
@@ -61,7 +60,7 @@ static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev) val =readl_relaxed (priv->base +REG_PWR_CR3 ); -return (val & priv->desc->enable_mask); +return (val & rdev->desc->enable_mask); }static int stm32_pwr_reg_enable (struct regulator_dev *rdev)
@@ -71,7 +70,7 @@ static int stm32_pwr_reg_enable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val |= priv->desc->enable_mask; + val |= rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -90,7 +89,7 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev)u32 val; val =readl_relaxed (priv->base +REG_PWR_CR3 ); - val &= ~priv->desc->enable_mask; + val &= ~rdev->desc->enable_mask;writel_relaxed (val, priv->base +REG_PWR_CR3 );/* use an arbitrary timeout of 20ms */
@@ -153,7 +152,6 @@ static int stm32_pwr_regulator_probe(struct platform_device *pdev)if (!priv)return -ENOMEM ; priv->base = base; - priv->desc = &stm32_pwr_desc[i]; priv->ready_mask = ready_mask_table[i]; config.driver_data = priv;
Signature · 1 line
2.20.1