commit: Make base read-only if there is an early failure
v3 cover commit: Make base read-only if there is an early failure
Hi,
Here's v3 of this series, the only changes are the corrections in the iotest suggested by Max.
Regards,
Berto
v3:
- Patch 2: Use $() instead of backquotes, remove 'here' variable and don't use 'sleep' when waiting for block-commit to finish [Max]
v2: https://lists.gnu.org/archive/html/qemu-block/2019-04/msg00334.html
- Patch 2: Added test case
v1: https://lists.gnu.org/archive/html/qemu-block/2019-04/msg00281.html
Output of backport-diff against v2:
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively
Alberto Garcia (2):
commit: Make base read-only if there is an early failure
iotests: Check that images are in read-only mode after block-commit
block/commit.c | 3 ++ tests/qemu-iotests/249 | 115 +++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/249.out | 35 ++++++++++++++ tests/qemu-iotests/group | 1 + 4 files changed, 154 insertions(+) create mode 100755 tests/qemu-iotests/249 create mode 100644 tests/qemu-iotests/249.out
Signature · 1 line
2.11.0
PATCH v3 1/2 commit: Make base read-only if there is an early failure
You can reproduce this by passing an invalid filter-node-name (like "1234") to block-commit. In this case the base image is put in read-write mode but is never reset back to read-only.
--- block/commit.c | 3 +++ 1 file changed, 3 insertions(+)
block/commit.c +3 -0
@@ -384,6 +384,9 @@ fail:if (s->top) {blk_unref (s->top); } +if (s->base_read_only) { +bdrv_reopen_set_read_only (base, true,NULL ); + }job_early_fail (&s->common.job);/* commit_top_bs has to be replaced after deleting the block job, * otherwise this would fail because of lack of permissions. */
Signature · 1 line
2.11.0
PATCH v3 2/2 iotests: Check that images are in read-only mode after block-commit
In reply to Alberto GarciaThis tests the fix from the previous patch.
--- tests/qemu-iotests/249 | 115 +++++++++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/249.out | 35 ++++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 151 insertions(+) create mode 100755 tests/qemu-iotests/249 create mode 100644 tests/qemu-iotests/249.out
tests/qemu-iotests/249 new file +115 -0
@@ -0,0 +1,115 @@ +#!/usr/bin/env bash +# +# Test that a backing image is put back in read-only mode after +# block-commit (both when it fails and when it succeeds). +# +# Copyright (C) 2019 Igalia, S.L. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# creator [email protected] + +seq="$(basename $0)" +echo "QA output created by $seq" + +status=1 # failure is the default! + +_cleanup() +{ + _cleanup_test_img + rm -f "$TEST_IMG.base" + rm -f "$TEST_IMG.int" +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common.rc +. ./common.filter +. ./common.qemu + +# Any format implementing BlockDriver.bdrv_change_backing_file +_supported_fmt qcow2 qed +_supported_proto file +_supported_os Linux + +IMG_SIZE=1M + +# Create the images: base <- int <- active +TEST_IMG="$TEST_IMG.base" _make_test_img $IMG_SIZE | _filter_imgfmt +TEST_IMG="$TEST_IMG.int" _make_test_img -b "$TEST_IMG.base" | _filter_imgfmt +_make_test_img -b "$TEST_IMG.int" | _filter_imgfmt + +# Launch QEMU with these two drives: +# none0: base (read-only) +# none1: base <- int <- active +_launch_qemu -drive if=none,file="${TEST_IMG}.base",node-name=base,read-only=on \ + -drive if=none,file="${TEST_IMG}",backing.node-name=int,backing.backing=base + +_send_qemu_cmd $QEMU_HANDLE \ + "{ 'execute': 'qmp_capabilities' }" \ + 'return' + +echo +echo '=== Send a write command to a drive opened in read-only mode (1)' +echo +_send_qemu_cmd $QEMU_HANDLE \ + "{ 'execute': 'human-monitor-command', + 'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \ + 'return' + +echo +echo '=== Run block-commit on base using an invalid filter node name' +echo +_send_qemu_cmd $QEMU_HANDLE \ + "{ 'execute': 'block-commit', + 'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int', + 'filter-node-name': '1234'}}" \ + 'error' + +echo +echo '=== Send a write command to a drive opened in read-only mode (2)' +echo +_send_qemu_cmd $QEMU_HANDLE \ + "{ 'execute': 'human-monitor-command', + 'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \ + 'return' + +echo +echo '=== Run block-commit on base using the default filter node name' +echo +_send_qemu_cmd $QEMU_HANDLE \ + "{ 'execute': 'block-commit', + 'arguments': {'job-id': 'job0', 'device': 'none1', 'top-node': 'int'}}" \ + 'return' + +# Wait for block-commit to finish +_send_qemu_cmd $QEMU_HANDLE '' \ + '"status": "null"' + +echo +echo '=== Send a write command to a drive opened in read-only mode (3)' +echo +_send_qemu_cmd $QEMU_HANDLE \ + "{ 'execute': 'human-monitor-command', + 'arguments': {'command-line': 'qemu-io none0 \"aio_write 0 2k\"'}}" \ + 'return' + +_cleanup_qemu + +# success, all done +echo "*** done" +rm -f $seq.full +status=0
tests/qemu-iotests/249.out new file +35 -0
@@ -0,0 +1,35 @@ +QA output created by 249 +Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=1048576 +Formatting 'TEST_DIR/t.IMGFMT.int', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.base +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 backing_file=TEST_DIR/t.IMGFMT.int +{"return": {}} + +=== Send a write command to a drive opened in read-only mode (1) + +{"return": "Block node is read-onlyrn"} + +=== Run block-commit on base using an invalid filter node name + +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}} +{"error": {"class": "GenericError", "desc": "Invalid node name"}} + +=== Send a write command to a drive opened in read-only mode (2) + +{"return": "Block node is read-onlyrn"} + +=== Run block-commit on base using the default filter node name + +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "job0"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "job0"}} +{"return": {}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "waiting", "id": "job0"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "pending", "id": "job0"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "job0", "len": 1048576, "offset": 1048576, "speed": 0, "type": "commit"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "concluded", "id": "job0"}} +{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "null", "id": "job0"}} + +=== Send a write command to a drive opened in read-only mode (3) + +{"return": "Block node is read-onlyrn"} +*** done
tests/qemu-iotests/group +1 -0
@@ -248,3 +248,4 @@ 246 rw auto quick 247 rw auto quick 248 rw auto quick +249 rw auto quick
Signature · 1 line
2.11.0
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14 NETWORK=1 === TEST SCRIPT END ===
The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===
The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Kevin Wolf
AppliedAm 29.04.2019 um 15:51 hat Alberto Garcia geschrieben:
Quoted 4 lines
Hi,
Here's v3 of this series, the only changes are the corrections in the iotest suggested by Max.
Thanks, applied to the block branch.
Kevin