ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
PATCH 1/1 ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest dra76x data manual[1].
Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well.
[1] http://www.ti.com/lit/ds/symlink/dra76p.pdf
---
Tested on dra76x-evm and am574x-idk.
arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi | 40 +++++++++++------------ 1 file changed, 20 insertions(+), 20 deletions(-)
arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi +20 -20
@@ -22,7 +22,7 @@ * * Datamanual Revisions: * - * DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017 + * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018 * */
@@ -169,25 +169,25 @@ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf { pinctrl-pin-array = < - 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ - 0x194 A_DELAY_PS(0) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ - 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ - 0x1ac A_DELAY_PS(85) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ - 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ - 0x1b8 A_DELAY_PS(139) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ - 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ - 0x1c4 A_DELAY_PS(69) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ - 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ - 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ - 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ - 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ - 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ - 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ - 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ - 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ - 0x200 A_DELAY_PS(36) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ - 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ - 0x368 A_DELAY_PS(72) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(350) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(335) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(339) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(219) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(236) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(372) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ >; };
Signature · 1 line
2.19.2
Hi,
Quoted 5 lines · Faiz Abbas
Update the
MMC2_HS200_MANUAL1iodelay values to match with the latest dra76x data manual[1].Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well.
Is this needed as a fix or can this wait?
Regards,
Tony
Hi Tony,
Quoted 11 lines · Tony Lindgren
Hi,
Quoted 5 lines · Faiz Abbas
Update the
MMC2_HS200_MANUAL1iodelay values to match with the latest dra76x data manual[1].Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well.
Is this needed as a fix or can this wait?
This is a fix. The new iodelay values will have better marginality and should prevent issues in corner cases.
Thanks,
Faiz
Quoted 9 lines · Faiz Abbas
Hi Tony,
Quoted 6 lines · Tony Lindgren
Hi,
Quoted 3 lines · Faiz Abbas
Update the
MMC2_HS200_MANUAL1iodelay values to match with the latest dra76x data manual[1].
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well.
Is this needed as a fix or can this wait?
This is a fix. The new iodelay values will have better marginality and should prevent issues in corner cases.
OK thanks tagging this one with cc stable as well.
Regards,
Tony