Skip to contentSkip to conversation

regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc

PATCH In review Axel Lin 2 participants 8 messages May 2, 2019 – May 3, 2019 Voltage and current regulator framework

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/2 regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc

These regulator_ops variables and ab3100_regulator_desc array never need to be modified, make them const so compiler can put them to .rodata.

---
 drivers/regulator/ab3100.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/regulator/ab3100.c +7 -7
index c92966a79a7e..edde907a7062 100644
@@ -353,14 +353,14 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 		return 0;
 }
 
-static struct regulator_ops regulator_ops_fixed = {
+static const struct regulator_ops regulator_ops_fixed = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 };
 
-static struct regulator_ops regulator_ops_variable = {
+static const struct regulator_ops regulator_ops_variable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -369,7 +369,7 @@ static struct regulator_ops regulator_ops_variable = {
 	.list_voltage = regulator_list_voltage_table,
 };
 
-static struct regulator_ops regulator_ops_variable_sleepable = {
+static const struct regulator_ops regulator_ops_variable_sleepable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -385,14 +385,14 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
  * is an on/off switch plain an simple. The external
  * voltage is defined in the board set-up if any.
  */
-static struct regulator_ops regulator_ops_external = {
+static const struct regulator_ops regulator_ops_external = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator_external,
 };
 
-static struct regulator_desc
+static const struct regulator_desc
 ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 	{
 		.name = "LDO_A",
@@ -499,7 +499,7 @@ static int ab3100_regulator_register(struct platform_device *pdev,
 				     struct device_node *np,
 				     unsigned long id)
 {
-	struct regulator_desc *desc;
+	const struct regulator_desc *desc;
 	struct ab3100_regulator *reg;
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
@@ -688,7 +688,7 @@ static int ab3100_regulators_probe(struct platform_device *pdev)
 
 	/* Register the regulators */
 	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		struct regulator_desc *desc = &ab3100_regulator_desc[i];
+		const struct regulator_desc *desc = &ab3100_regulator_desc[i];
 
 		err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
 						desc->id);
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH 2/2 regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators

Slightly better readability by setting fixed_uV instead of min_uV.

---
 drivers/regulator/ab3100.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/regulator/ab3100.c +3 -4
index edde907a7062..438509f55f05 100644
@@ -354,7 +354,6 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 }
 
 static const struct regulator_ops regulator_ops_fixed = {
-	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -401,7 +400,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_A_VOLTAGE,
+		.fixed_uV = LDO_A_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -411,7 +410,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_C_VOLTAGE,
+		.fixed_uV = LDO_C_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -421,7 +420,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_D_VOLTAGE,
+		.fixed_uV = LDO_D_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
Signature · 1 line
2.20.1
maintainer
#2 lore raw

Applied "regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators" to the regulator tree

The patch

regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From e219c2b3dc773a5a78f88ada9e07e281a9dad06b Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Thu, 2 May 2019 22:22:33 +0800
Subject: [PATCH] regulator: ab3100: Set fixed_uV instead of min_uV for fixed
regulators

Slightly better readability by setting fixed_uV instead of min_uV.

---
 drivers/regulator/ab3100.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/regulator/ab3100.c +3 -4
index edde907a7062..438509f55f05 100644
@@ -354,7 +354,6 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 }
 
 static const struct regulator_ops regulator_ops_fixed = {
-	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -401,7 +400,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_A_VOLTAGE,
+		.fixed_uV = LDO_A_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -411,7 +410,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_C_VOLTAGE,
+		.fixed_uV = LDO_C_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -421,7 +420,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_D_VOLTAGE,
+		.fixed_uV = LDO_D_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
Signature · 1 line
2.20.1
maintainer
#3 lore raw

Applied "regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators" to the regulator tree

In reply to Axel Lin

The patch

regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From e219c2b3dc773a5a78f88ada9e07e281a9dad06b Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Thu, 2 May 2019 22:22:33 +0800
Subject: [PATCH] regulator: ab3100: Set fixed_uV instead of min_uV for fixed
regulators

Slightly better readability by setting fixed_uV instead of min_uV.

---
 drivers/regulator/ab3100.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/regulator/ab3100.c +3 -4
index edde907a7062..438509f55f05 100644
@@ -354,7 +354,6 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 }
 
 static const struct regulator_ops regulator_ops_fixed = {
-	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -401,7 +400,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_A_VOLTAGE,
+		.fixed_uV = LDO_A_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -411,7 +410,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_C_VOLTAGE,
+		.fixed_uV = LDO_C_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -421,7 +420,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_D_VOLTAGE,
+		.fixed_uV = LDO_D_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
Signature · 1 line
2.20.1
maintainer
#4 lore raw

Applied "regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators" to the regulator tree

In reply to Axel Lin

The patch

regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From e219c2b3dc773a5a78f88ada9e07e281a9dad06b Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Thu, 2 May 2019 22:22:33 +0800
Subject: [PATCH] regulator: ab3100: Set fixed_uV instead of min_uV for fixed
regulators

Slightly better readability by setting fixed_uV instead of min_uV.

---
 drivers/regulator/ab3100.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/regulator/ab3100.c +3 -4
index edde907a7062..438509f55f05 100644
@@ -354,7 +354,6 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 }
 
 static const struct regulator_ops regulator_ops_fixed = {
-	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -401,7 +400,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_A_VOLTAGE,
+		.fixed_uV = LDO_A_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -411,7 +410,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_C_VOLTAGE,
+		.fixed_uV = LDO_C_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
@@ -421,7 +420,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 		.n_voltages = 1,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
-		.min_uV = LDO_D_VOLTAGE,
+		.fixed_uV = LDO_D_VOLTAGE,
 		.enable_time = 200,
 	},
 	{
Signature · 1 line
2.20.1
maintainer
#5 lore raw

Applied "regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc" to the regulator tree

In reply to Axel Lin

The patch

regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 95602d7d77f502d656e648ab38f8e0586364e7dc Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Thu, 2 May 2019 22:22:32 +0800
Subject: [PATCH] regulator: ab3100: Constify regulator_ops and
ab3100_regulator_desc

These regulator_ops variables and ab3100_regulator_desc array never need to be modified, make them const so compiler can put them to .rodata.

---
 drivers/regulator/ab3100.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/regulator/ab3100.c +7 -7
index c92966a79a7e..edde907a7062 100644
@@ -353,14 +353,14 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 		return 0;
 }
 
-static struct regulator_ops regulator_ops_fixed = {
+static const struct regulator_ops regulator_ops_fixed = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 };
 
-static struct regulator_ops regulator_ops_variable = {
+static const struct regulator_ops regulator_ops_variable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -369,7 +369,7 @@ static struct regulator_ops regulator_ops_variable = {
 	.list_voltage = regulator_list_voltage_table,
 };
 
-static struct regulator_ops regulator_ops_variable_sleepable = {
+static const struct regulator_ops regulator_ops_variable_sleepable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -385,14 +385,14 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
  * is an on/off switch plain an simple. The external
  * voltage is defined in the board set-up if any.
  */
-static struct regulator_ops regulator_ops_external = {
+static const struct regulator_ops regulator_ops_external = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator_external,
 };
 
-static struct regulator_desc
+static const struct regulator_desc
 ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 	{
 		.name = "LDO_A",
@@ -499,7 +499,7 @@ static int ab3100_regulator_register(struct platform_device *pdev,
 				     struct device_node *np,
 				     unsigned long id)
 {
-	struct regulator_desc *desc;
+	const struct regulator_desc *desc;
 	struct ab3100_regulator *reg;
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
@@ -688,7 +688,7 @@ static int ab3100_regulators_probe(struct platform_device *pdev)
 
 	/* Register the regulators */
 	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		struct regulator_desc *desc = &ab3100_regulator_desc[i];
+		const struct regulator_desc *desc = &ab3100_regulator_desc[i];
 
 		err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
 						desc->id);
Signature · 1 line
2.20.1
maintainer
#6 lore raw

Applied "regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc" to the regulator tree

In reply to Axel Lin

The patch

regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 95602d7d77f502d656e648ab38f8e0586364e7dc Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Thu, 2 May 2019 22:22:32 +0800
Subject: [PATCH] regulator: ab3100: Constify regulator_ops and
ab3100_regulator_desc

These regulator_ops variables and ab3100_regulator_desc array never need to be modified, make them const so compiler can put them to .rodata.

---
 drivers/regulator/ab3100.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/regulator/ab3100.c +7 -7
index c92966a79a7e..edde907a7062 100644
@@ -353,14 +353,14 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 		return 0;
 }
 
-static struct regulator_ops regulator_ops_fixed = {
+static const struct regulator_ops regulator_ops_fixed = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 };
 
-static struct regulator_ops regulator_ops_variable = {
+static const struct regulator_ops regulator_ops_variable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -369,7 +369,7 @@ static struct regulator_ops regulator_ops_variable = {
 	.list_voltage = regulator_list_voltage_table,
 };
 
-static struct regulator_ops regulator_ops_variable_sleepable = {
+static const struct regulator_ops regulator_ops_variable_sleepable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -385,14 +385,14 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
  * is an on/off switch plain an simple. The external
  * voltage is defined in the board set-up if any.
  */
-static struct regulator_ops regulator_ops_external = {
+static const struct regulator_ops regulator_ops_external = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator_external,
 };
 
-static struct regulator_desc
+static const struct regulator_desc
 ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 	{
 		.name = "LDO_A",
@@ -499,7 +499,7 @@ static int ab3100_regulator_register(struct platform_device *pdev,
 				     struct device_node *np,
 				     unsigned long id)
 {
-	struct regulator_desc *desc;
+	const struct regulator_desc *desc;
 	struct ab3100_regulator *reg;
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
@@ -688,7 +688,7 @@ static int ab3100_regulators_probe(struct platform_device *pdev)
 
 	/* Register the regulators */
 	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		struct regulator_desc *desc = &ab3100_regulator_desc[i];
+		const struct regulator_desc *desc = &ab3100_regulator_desc[i];
 
 		err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
 						desc->id);
Signature · 1 line
2.20.1
maintainer
#7 lore raw

Applied "regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc" to the regulator tree

In reply to Axel Lin

The patch

regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 95602d7d77f502d656e648ab38f8e0586364e7dc Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Thu, 2 May 2019 22:22:32 +0800
Subject: [PATCH] regulator: ab3100: Constify regulator_ops and
ab3100_regulator_desc

These regulator_ops variables and ab3100_regulator_desc array never need to be modified, make them const so compiler can put them to .rodata.

---
 drivers/regulator/ab3100.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/regulator/ab3100.c +7 -7
index c92966a79a7e..edde907a7062 100644
@@ -353,14 +353,14 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
 		return 0;
 }
 
-static struct regulator_ops regulator_ops_fixed = {
+static const struct regulator_ops regulator_ops_fixed = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 };
 
-static struct regulator_ops regulator_ops_variable = {
+static const struct regulator_ops regulator_ops_variable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -369,7 +369,7 @@ static struct regulator_ops regulator_ops_variable = {
 	.list_voltage = regulator_list_voltage_table,
 };
 
-static struct regulator_ops regulator_ops_variable_sleepable = {
+static const struct regulator_ops regulator_ops_variable_sleepable = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
@@ -385,14 +385,14 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
  * is an on/off switch plain an simple. The external
  * voltage is defined in the board set-up if any.
  */
-static struct regulator_ops regulator_ops_external = {
+static const struct regulator_ops regulator_ops_external = {
 	.enable      = ab3100_enable_regulator,
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator_external,
 };
 
-static struct regulator_desc
+static const struct regulator_desc
 ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 	{
 		.name = "LDO_A",
@@ -499,7 +499,7 @@ static int ab3100_regulator_register(struct platform_device *pdev,
 				     struct device_node *np,
 				     unsigned long id)
 {
-	struct regulator_desc *desc;
+	const struct regulator_desc *desc;
 	struct ab3100_regulator *reg;
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
@@ -688,7 +688,7 @@ static int ab3100_regulators_probe(struct platform_device *pdev)
 
 	/* Register the regulators */
 	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		struct regulator_desc *desc = &ab3100_regulator_desc[i];
+		const struct regulator_desc *desc = &ab3100_regulator_desc[i];
 
 		err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
 						desc->id);
Signature · 1 line
2.20.1