arm: mvebu: clearfog: Enable BLK and DM support
PATCH 1/3 arm: mvebu: clearfog: Enable BLK and DM support
This patch enables CONFIG_BLK and some DM enabled drivers on clearfog to remove these compile warnings:
===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ====================== This board does use CONFIG_LIBATA but has CONFIG_AHCI not enabled. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release.
Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
--- configs/clearfog_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
configs/clearfog_defconfig +3 -1
@@ -15,6 +15,7 @@ CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_DEBUG_UART=y +CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y
@@ -40,11 +41,12 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y CONFIG_DM_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y +CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y
Signature · 1 line
2.21.0
PATCH 1/3 arm: mvebu: clearfog: Enable BLK and DM support
Quoted 23 lines · Stefan Roese
This patch enables
CONFIG_BLKand some DM enabled drivers on clearfog to remove these compile warnings:===================== WARNING ====================== This board does not use
CONFIG_DM_MMC. Please update the board to useCONFIG_DM_MMCbefore the v2019.04 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does not useCONFIG_DM_USB. Please update the board to useCONFIG_DM_USBbefore the v2019.07 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does useCONFIG_LIBATAbut hasCONFIG_AHCInot enabled. Please update the storage controller driver to useCONFIG_AHCIbefore the v2019.07 release.
Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
Quoted 1 line
Signed-off-by Stefan Roese <[email protected]>
Applied to u-boot-marvell/master.
Thanks,
Stefan
PATCH 2/3 arm: mvebu: db-88f6720: Enable CONFIG_BLK
In reply to Stefan RoeseThis patch enables CONFIG_BLK to remove this compile warning:
===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
--- configs/db-88f6720_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/db-88f6720_defconfig +1 -0
@@ -44,6 +44,7 @@ CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y +CONFIG_BLK=y CONFIG_MISC=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y
Signature · 1 line
2.21.0
PATCH 2/3 arm: mvebu: db-88f6720: Enable CONFIG_BLK
Quoted 10 lines · Stefan Roese
This patch enables
CONFIG_BLKto remove this compile warning:===================== WARNING ====================== This board does not use
CONFIG_DM_USB. Please update the board to useCONFIG_DM_USBbefore the v2019.07 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================Signed-off-by Stefan Roese <[email protected]>
Applied to u-boot-marvell/master.
Thanks,
Stefan
PATCH 3/3 arm: mvebu: db-88f6820-gp: Enabel BLK and DM support
In reply to Stefan RoeseThis patch enables CONFIG_BLK and some DM enabled drivers on db-88f6820-gp to remove these compile warnings:
===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ====================== This board does use CONFIG_LIBATA but has CONFIG_AHCI not enabled. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release.
Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
--- configs/db-88f6820-gp_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
configs/db-88f6820-gp_defconfig +3 -1
@@ -13,6 +13,7 @@ CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEBUG_UART=y +CONFIG_AHCI=y CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set
@@ -47,7 +48,8 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y +CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y
Signature · 1 line
2.21.0
PATCH 3/3 arm: mvebu: db-88f6820-gp: Enabel BLK and DM support
Quoted 23 lines · Stefan Roese,
This patch enables
CONFIG_BLKand some DM enabled drivers on db-88f6820-gp to remove these compile warnings:===================== WARNING ====================== This board does not use
CONFIG_DM_MMC. Please update the board to useCONFIG_DM_MMCbefore the v2019.04 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does not useCONFIG_DM_USB. Please update the board to useCONFIG_DM_USBbefore the v2019.07 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does useCONFIG_LIBATAbut hasCONFIG_AHCInot enabled. Please update the storage controller driver to useCONFIG_AHCIbefore the v2019.07 release.
Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
Quoted 2 lines
Signed-off-by Stefan Roese <[email protected]>
Typo in subject line. Other than that
---
Quoted 34 lines
configs/db-88f6820-gp_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)configs/db-88f6820-gp_defconfig +3
-2@@ -13,6 +13,7 @@ CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEBUG_UART=y +CONFIG_AHCI=y CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set@@ -47,7 +48,8 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SCSI_AHCI=y +CONFIG_AHCI_MVEBU=y +CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y --2.21.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 3/3 arm: mvebu: db-88f6820-gp: Enabel BLK and DM support
In reply to Stefan RoeseQuoted 23 lines · Stefan Roese
This patch enables
CONFIG_BLKand some DM enabled drivers on db-88f6820-gp to remove these compile warnings:===================== WARNING ====================== This board does not use
CONFIG_DM_MMC. Please update the board to useCONFIG_DM_MMCbefore the v2019.04 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does not useCONFIG_DM_USB. Please update the board to useCONFIG_DM_USBbefore the v2019.07 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does useCONFIG_LIBATAbut hasCONFIG_AHCInot enabled. Please update the storage controller driver to useCONFIG_AHCIbefore the v2019.07 release.
Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
Quoted 1 line
Signed-off-by Stefan Roese <[email protected]>
Applied to u-boot-marvell/master. (after fixing the typo in the subject)
Thanks,
Stefan