nvme-fc: use separate work queue to avoid warning
Subsystems (2)
PATCH 1/1 nvme-fc: use separate work queue to avoid warning
When tearing down a controller the following warning is issued:
WARNING: CPU: 0 PID: 30681 at ../kernel/workqueue.c:2418 check_flush_dependency
This happens as the err_work workqueue item is scheduled on the system workqueue (which has WQ_MEM_RECLAIM not set), but is flushed from a workqueue which has WQ_MEM_RECLAIM set.
Fix this by providing an FC-NVMe specific workqueue.
--- drivers/nvme/host/fc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/nvme/host/fc.c +11 -3
@@ -204,7 +204,7 @@ static LIST_HEAD(nvme_fc_lport_list);static DEFINE_IDA (nvme_fc_local_port_cnt);static DEFINE_IDA (nvme_fc_ctrl_cnt); - +static struct workqueue_struct *nvme_fc_wq;/* * These items are short-term. They will eventually be moved into
@@ -2060,7 +2060,7 @@ nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg)*/ if (ctrl->ctrl.state ==NVME_CTRL_CONNECTING ) { active =atomic_xchg (&ctrl->err_work_active,1 ); -if (!active && !schedule_work (&ctrl->err_work)) { +if (!active && !queue_work (nvme_fc_wq, &ctrl->err_work)) {atomic_set (&ctrl->err_work_active,0 );WARN_ON (1 ); }
@@ -3406,6 +3406,10 @@ static int __init nvme_fc_init_module(void) {int ret; + nvme_fc_wq =alloc_workqueue ("nvme_fc_wq" ,WQ_MEM_RECLAIM ,0 ); +if (!nvme_fc_wq) +return -ENOMEM ; +/* * NOTE: * It is expected that in the future the kernel will combine
@@ -3423,7 +3427,7 @@ static int __init nvme_fc_init_module(void) ret =class_register (&fc_class);if (ret) {pr_err ("couldn't register class fc\n" ); -return ret; + goto out_destroy_wq; }/*
@@ -3447,6 +3451,9 @@ static int __init nvme_fc_init_module(void)device_destroy (&fc_class,MKDEV (0 ,0 )); out_destroy_class:class_unregister (&fc_class); +out_destroy_wq: +destroy_workqueue (nvme_fc_wq); +return ret; }
@@ -3463,6 +3470,7 @@ static void __exit nvme_fc_exit_module(void)device_destroy (&fc_class,MKDEV (0 ,0 ));class_unregister (&fc_class); +destroy_workqueue (nvme_fc_wq); }module_init (nvme_fc_init_module);
Signature · 1 line
2.16.4
PATCH 1/1 nvme-fc: use separate work queue to avoid warning
Quoted 70 lines · Hannes Reinecke
When tearing down a controller the following warning is issued:
WARNING: CPU: 0 PID: 30681 at ../kernel/workqueue.c:2418 check_flush_dependencyThis happens as the
err_workworkqueue item is scheduled on the system workqueue (which hasWQ_MEM_RECLAIMnot set), but is flushed from a workqueue which hasWQ_MEM_RECLAIMset.Fix this by providing an FC-NVMe specific workqueue.
Fixes 4cff280a5fcc ("nvme-fc: resolve io failures during connect")Cc James Smart <james.smart at broadcom.com>Signed-off-by Hannes Reinecke <hare at suse.com>--- drivers/nvme/host/fc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)drivers/nvme/host/fc.c +10
-3@@ -204,7 +204,7 @@ static LIST_HEAD(nvme_fc_lport_list);static DEFINE_IDA (nvme_fc_local_port_cnt);static DEFINE_IDA (nvme_fc_ctrl_cnt); - +static struct workqueue_struct *nvme_fc_wq;/* * These items are short-term. They will eventually be moved into @@ -2060,7 +2060,7 @@ nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg)*/ if (ctrl->ctrl.state ==NVME_CTRL_CONNECTING ) { active =atomic_xchg (&ctrl->err_work_active,1 ); -if (!active && !schedule_work (&ctrl->err_work)) { +if (!active && !queue_work (nvme_fc_wq, &ctrl->err_work)) {atomic_set (&ctrl->err_work_active,0 );WARN_ON (1 ); }@@ -3406,6 +3406,10 @@ static int __init nvme_fc_init_module(void) {int ret; + nvme_fc_wq =alloc_workqueue ("nvme_fc_wq" ,WQ_MEM_RECLAIM ,0 ); +if (!nvme_fc_wq) +return -ENOMEM ; +/* * NOTE: * It is expected that in the future the kernel will combine @@ -3423,7 +3427,7 @@ static int __init nvme_fc_init_module(void) ret =class_register (&fc_class);if (ret) {pr_err ("couldn't register class fc\n" ); -return ret; + goto out_destroy_wq; }/* @@ -3447,6 +3451,9 @@ static int __init nvme_fc_init_module(void)device_destroy (&fc_class,MKDEV (0 ,0 )); out_destroy_class:class_unregister (&fc_class); +out_destroy_wq: +destroy_workqueue (nvme_fc_wq); +return ret; }
drivers/nvme/host/fc.c static void __exit nvme_fc_exit_module(void) · line 3476
Quoted 7 lines
drivers/nvme/host/fc.c +1
-0@@ -3463,6 +3470,7 @@ static void __exit nvme_fc_exit_module(void)device_destroy (&fc_class,MKDEV (0 ,0 ));class_unregister (&fc_class); +destroy_workqueue (nvme_fc_wq); }module_init (nvme_fc_init_module);
Looks fine to me.? And we're back to were we were in the beginning. And it also says the other transports are likely to be in the same boat as the effort to move everything over to the system workqueue was a commonization cleanup made to all transports.
-- james
PATCH 1/1 nvme-fc: use separate work queue to avoid warning
In reply to Hannes ReineckeThanks,
applied to nvme-5.2.