ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
Subsystems (2)
PATCH RESEND 1/1 ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
From: Philippe Schenker <[email protected]>
Add the stmpe-adc DT node as found on Toradex T30 modules
Signed-off-by Philippe Schenker <[email protected]>
---
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++-------- arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++-------- 3 files changed, 42 insertions(+), 24 deletions(-)
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +14 -8
@@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*
arch/arm/boot/dts/tegra30-apalis.dtsi +14 -8
@@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /*
arch/arm/boot/dts/tegra30-colibri.dtsi +14 -8
@@ -845,11 +845,18 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* forbid to use ADC channels 3-0 (touch) */ stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */
@@ -859,17 +866,16 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; }; /*
Signature · 1 line
2.21.0