Skip to contentSkip to conversation

hw/net/ne2000: Extract the PCI device from the chipset common code

PATCH Applied Philippe Mathieu-Daudé 3 participants 4 messages May 4, 2019 – May 8, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hw/net/ne2000: Extract the PCI device from the chipset common code

The ne2000.c file contains functions common the the ISA and PCI devices. To allow to build with one or another, extract the PCI specific part into a new file.

This fix an issue where the NE2000_ISA Kconfig had to pull the full PCI core objects.

---
 hw/net/Kconfig       |   7 ++-
 hw/net/Makefile.objs |   3 +-
 hw/net/ne2000-pci.c  | 132 +++++++++++++++++++++++++++++++++++++++++++
 hw/net/ne2000.c      | 105 ----------------------------------
 4 files changed, 139 insertions(+), 108 deletions(-)
 create mode 100644 hw/net/ne2000-pci.c
hw/net/Kconfig +5 -2
index 7d7bbc5d7c9..4ef86dc3a53 100644
@@ -1,10 +1,14 @@
 config DP8393X
     bool
 
+config NE2000_COMMON
+    bool
+
 config NE2000_PCI
     bool
     default y if PCI_DEVICES
     depends on PCI
+    select NE2000_COMMON
 
 config EEPRO100_PCI
     bool
@@ -51,8 +55,7 @@ config NE2000_ISA
     bool
     default y
     depends on ISA_BUS
-    depends on PCI # for NE2000State
-    select NE2000_PCI
+    select NE2000_COMMON
 
 config OPENCORES_ETH
     bool
hw/net/Makefile.objs +2 -1
index ea637157802..9904273b060 100644
@@ -1,8 +1,9 @@
 common-obj-$(CONFIG_DP8393X) += dp8393x.o
 common-obj-$(CONFIG_XEN) += xen_nic.o
+common-obj-$(CONFIG_NE2000_COMMON) += ne2000.o
 
 # PCI network cards
-common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
+common-obj-$(CONFIG_NE2000_PCI) += ne2000-pci.o
 common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
 common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
 common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
hw/net/ne2000-pci.c new file +132 -0

132 lines not on this page · raw message

hw/net/ne2000.c +0 -105

126 lines not on this page · raw message

Signature · 1 line
2.20.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 21 lines · Philippe Mathieu-Daudé

The ne2000.c file contains functions common the the ISA and PCI devices. To allow to build with one or another, extract the PCI specific part into a new file.

This fix an issue where the NE2000_ISA Kconfig had to pull the full PCI core objects.

---
 hw/net/Kconfig       |   7 ++-
 hw/net/Makefile.objs |   3 +-
 hw/net/ne2000-pci.c  | 132 +++++++++++++++++++++++++++++++++++++++++++
 hw/net/ne2000.c      | 105 ----------------------------------
 4 files changed, 139 insertions(+), 108 deletions(-)
 create mode 100644 hw/net/ne2000-pci.c
hw/net/Kconfig +0 -0
index 7d7bbc5d7c9..4ef86dc3a53 100644

hw/net/Kconfig line 5

Quoted 5 lines
hw/net/Kconfig +2 -0
@@ -1,10 +1,14 @@
 config DP8393X
     bool
 
+config NE2000_COMMON
+    bool

I'd maybe rather simply name it "NE2000" instead of "NE2000_COMMON", but that's just a matter of taste.

#2 lore raw
Quoted 25 lines · Thomas Huth
Quoted 24 lines · Philippe Mathieu-Daudé

The ne2000.c file contains functions common the the ISA and PCI devices. To allow to build with one or another, extract the PCI specific part into a new file.

This fix an issue where the NE2000_ISA Kconfig had to pull the full PCI core objects.

---
 hw/net/Kconfig       |   7 ++-
 hw/net/Makefile.objs |   3 +-
 hw/net/ne2000-pci.c  | 132 +++++++++++++++++++++++++++++++++++++++++++
 hw/net/ne2000.c      | 105 ----------------------------------
 4 files changed, 139 insertions(+), 108 deletions(-)
 create mode 100644 hw/net/ne2000-pci.c
hw/net/Kconfig +0 -0
index 7d7bbc5d7c9..4ef86dc3a53 100644
@@ -1,10 +1,14 @@
 config DP8393X
     bool
 
Quoted 5 lines

hw/net/Kconfig line 5

Quoted 2 lines
hw/net/Kconfig +2 -0
+config NE2000_COMMON
+    bool

I'd maybe rather simply name it "NE2000" instead of "NE2000_COMMON", but that's just a matter of taste.

I started using this name, but then realized it is confuse and someone could enable CONFIG_NE2000=y expecting a network device, but none would be linked.

Paolo, would it be useful to add some 'internal' Kconfig property (like "default")? So that config is not user-selectable, but only dependency-selectable. CONFIG_ARM_V7M might be a similar example (we don't want the user to unselect it).

Quoted 2 lines

Thanks!

#3 lore raw
In reply to Philippe Mathieu-Daudé
Quoted 323 lines · Philippe Mathieu-Daudé

The ne2000.c file contains functions common the the ISA and PCI devices. To allow to build with one or another, extract the PCI specific part into a new file.

This fix an issue where the NE2000_ISA Kconfig had to pull the full PCI core objects.

---
 hw/net/Kconfig       |   7 ++-
 hw/net/Makefile.objs |   3 +-
 hw/net/ne2000-pci.c  | 132 +++++++++++++++++++++++++++++++++++++++++++
 hw/net/ne2000.c      | 105 ----------------------------------
 4 files changed, 139 insertions(+), 108 deletions(-)
 create mode 100644 hw/net/ne2000-pci.c
hw/net/Kconfig +5 -2
index 7d7bbc5d7c9..4ef86dc3a53 100644
@@ -1,10 +1,14 @@
 config DP8393X
     bool
 
+config NE2000_COMMON
+    bool
+
 config NE2000_PCI
     bool
     default y if PCI_DEVICES
     depends on PCI
+    select NE2000_COMMON
 
 config EEPRO100_PCI
     bool
@@ -51,8 +55,7 @@ config NE2000_ISA
     bool
     default y
     depends on ISA_BUS
-    depends on PCI # for NE2000State
-    select NE2000_PCI
+    select NE2000_COMMON
 
 config OPENCORES_ETH
     bool
hw/net/Makefile.objs +2 -1
index ea637157802..9904273b060 100644
@@ -1,8 +1,9 @@
 common-obj-$(CONFIG_DP8393X) += dp8393x.o
 common-obj-$(CONFIG_XEN) += xen_nic.o
+common-obj-$(CONFIG_NE2000_COMMON) += ne2000.o
 
 # PCI network cards
-common-obj-$(CONFIG_NE2000_PCI) += ne2000.o
+common-obj-$(CONFIG_NE2000_PCI) += ne2000-pci.o
 common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
 common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
 common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
hw/net/ne2000-pci.c new file +132 -0
new file mode 100644
index 00000000000..cb05744f3c3
@@ -0,0 +1,132 @@
+/*
+ * QEMU NE2000 emulation (PCI bus)
+ *
+ * Copyright (c) 2003-2004 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "qemu/osdep.h"
+#include "hw/pci/pci.h"
+#include "ne2000.h"
+#include "sysemu/sysemu.h"
+
+typedef struct PCINE2000State {
+    PCIDevice dev;
+    NE2000State ne2000;
+} PCINE2000State;
+
+static const VMStateDescription vmstate_pci_ne2000 = {
+    .name = "ne2000",
+    .version_id = 3,
+    .minimum_version_id = 3,
+    .fields = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(dev, PCINE2000State),
+        VMSTATE_STRUCT(ne2000, PCINE2000State, 0, vmstate_ne2000, NE2000State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static NetClientInfo net_ne2000_info = {
+    .type = NET_CLIENT_DRIVER_NIC,
+    .size = sizeof(NICState),
+    .receive = ne2000_receive,
+};
+
+static void pci_ne2000_realize(PCIDevice *pci_dev, Error **errp)
+{
+    PCINE2000State *d = DO_UPCAST(PCINE2000State, dev, pci_dev);
+    NE2000State *s;
+    uint8_t *pci_conf;
+
+    pci_conf = d->dev.config;
+    pci_conf[PCI_INTERRUPT_PIN] = 1; /* interrupt pin A */
+
+    s = &d->ne2000;
+    ne2000_setup_io(s, DEVICE(pci_dev), 0x100);
+    pci_register_bar(&d->dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
+    s->irq = pci_allocate_irq(&d->dev);
+
+    qemu_macaddr_default_if_unset(&s->c.macaddr);
+    ne2000_reset(s);
+
+    s->nic = qemu_new_nic(&net_ne2000_info, &s->c,
+                          object_get_typename(OBJECT(pci_dev)),
+                          pci_dev->qdev.id, s);
+    qemu_format_nic_info_str(qemu_get_queue(s->nic), s->c.macaddr.a);
+}
+
+static void pci_ne2000_exit(PCIDevice *pci_dev)
+{
+    PCINE2000State *d = DO_UPCAST(PCINE2000State, dev, pci_dev);
+    NE2000State *s = &d->ne2000;
+
+    qemu_del_nic(s->nic);
+    qemu_free_irq(s->irq);
+}
+
+static void ne2000_instance_init(Object *obj)
+{
+    PCIDevice *pci_dev = PCI_DEVICE(obj);
+    PCINE2000State *d = DO_UPCAST(PCINE2000State, dev, pci_dev);
+    NE2000State *s = &d->ne2000;
+
+    device_add_bootindex_property(obj, &s->c.bootindex,
+                                  "bootindex", "/ethernet-phy@0",
+                                  &pci_dev->qdev, NULL);
+}
+
+static Property ne2000_properties[] = {
+    DEFINE_NIC_PROPERTIES(PCINE2000State, ne2000.c),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ne2000_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->realize = pci_ne2000_realize;
+    k->exit = pci_ne2000_exit;
+    k->romfile = "efi-ne2k_pci.rom",
+    k->vendor_id = PCI_VENDOR_ID_REALTEK;
+    k->device_id = PCI_DEVICE_ID_REALTEK_8029;
+    k->class_id = PCI_CLASS_NETWORK_ETHERNET;
+    dc->vmsd = &vmstate_pci_ne2000;
+    dc->props = ne2000_properties;
+    set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
+}
+
+static const TypeInfo ne2000_info = {
+    .name          = "ne2k_pci",
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(PCINE2000State),
+    .class_init    = ne2000_class_init,
+    .instance_init = ne2000_instance_init,
+    .interfaces = (InterfaceInfo[]) {
+        { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+        { },
+    },
+};
+
+static void ne2000_register_types(void)
+{
+    type_register_static(&ne2000_info);
+}
+
+type_init(ne2000_register_types)
hw/net/ne2000.c +0 -95
index 037afc8052a..ca792d96f1b 100644
@@ -22,7 +22,6 @@
  * THE SOFTWARE.
  */
 #include "qemu/osdep.h"
-#include "hw/pci/pci.h"
 #include "net/eth.h"
 #include "ne2000.h"
 #include "sysemu/sysemu.h"
@@ -118,11 +117,6 @@
 #define ENTSR_CDH 0x40	/* The collision detect "heartbeat" signal was lost. */
 #define ENTSR_OWC 0x80  /* There was an out-of-window collision. */
 
-typedef struct PCINE2000State {
-    PCIDevice dev;
-    NE2000State ne2000;
-} PCINE2000State;
-
 void ne2000_reset(NE2000State *s)
 {
     int i;
@@ -644,17 +638,6 @@ const VMStateDescription vmstate_ne2000 = {
     }
 };
 
-static const VMStateDescription vmstate_pci_ne2000 = {
-    .name = "ne2000",
-    .version_id = 3,
-    .minimum_version_id = 3,
-    .fields = (VMStateField[]) {
-        VMSTATE_PCI_DEVICE(dev, PCINE2000State),
-        VMSTATE_STRUCT(ne2000, PCINE2000State, 0, vmstate_ne2000, NE2000State),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
 static uint64_t ne2000_read(void *opaque, hwaddr addr,
                             unsigned size)
 {
@@ -711,91 +694,3 @@ void ne2000_setup_io(NE2000State *s, DeviceState *dev, unsigned size)
 {
     memory_region_init_io(&s->io, OBJECT(dev), &ne2000_ops, s, "ne2000", size);
 }
-
-static NetClientInfo net_ne2000_info = {
-    .type = NET_CLIENT_DRIVER_NIC,
-    .size = sizeof(NICState),
-    .receive = ne2000_receive,
-};
-
-static void pci_ne2000_realize(PCIDevice *pci_dev, Error **errp)
-{
-    PCINE2000State *d = DO_UPCAST(PCINE2000State, dev, pci_dev);
-    NE2000State *s;
-    uint8_t *pci_conf;
-
-    pci_conf = d->dev.config;
-    pci_conf[PCI_INTERRUPT_PIN] = 1; /* interrupt pin A */
-
-    s = &d->ne2000;
-    ne2000_setup_io(s, DEVICE(pci_dev), 0x100);
-    pci_register_bar(&d->dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
-    s->irq = pci_allocate_irq(&d->dev);
-
-    qemu_macaddr_default_if_unset(&s->c.macaddr);
-    ne2000_reset(s);
-
-    s->nic = qemu_new_nic(&net_ne2000_info, &s->c,
-                          object_get_typename(OBJECT(pci_dev)), pci_dev->qdev.id, s);
-    qemu_format_nic_info_str(qemu_get_queue(s->nic), s->c.macaddr.a);
-}
-
-static void pci_ne2000_exit(PCIDevice *pci_dev)
-{
-    PCINE2000State *d = DO_UPCAST(PCINE2000State, dev, pci_dev);
-    NE2000State *s = &d->ne2000;
-
-    qemu_del_nic(s->nic);
-    qemu_free_irq(s->irq);
-}
-
-static void ne2000_instance_init(Object *obj)
-{
-    PCIDevice *pci_dev = PCI_DEVICE(obj);
-    PCINE2000State *d = DO_UPCAST(PCINE2000State, dev, pci_dev);
-    NE2000State *s = &d->ne2000;
-
-    device_add_bootindex_property(obj, &s->c.bootindex,
-                                  "bootindex", "/ethernet-phy@0",
-                                  &pci_dev->qdev, NULL);
-}
-
-static Property ne2000_properties[] = {
-    DEFINE_NIC_PROPERTIES(PCINE2000State, ne2000.c),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void ne2000_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
-
-    k->realize = pci_ne2000_realize;
-    k->exit = pci_ne2000_exit;
-    k->romfile = "efi-ne2k_pci.rom",
-    k->vendor_id = PCI_VENDOR_ID_REALTEK;
-    k->device_id = PCI_DEVICE_ID_REALTEK_8029;
-    k->class_id = PCI_CLASS_NETWORK_ETHERNET;
-    dc->vmsd = &vmstate_pci_ne2000;
-    dc->props = ne2000_properties;
-    set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
-}
-
-static const TypeInfo ne2000_info = {
-    .name          = "ne2k_pci",
-    .parent        = TYPE_PCI_DEVICE,
-    .instance_size = sizeof(PCINE2000State),
-    .class_init    = ne2000_class_init,
-    .instance_init = ne2000_instance_init,
-    .interfaces = (InterfaceInfo[]) {
-        { INTERFACE_CONVENTIONAL_PCI_DEVICE },

hw/net/ne2000.c void ne2000_setup_io(NE2000State *s, DeviceState *dev, unsigned size) · line 801

Quoted 10 lines
hw/net/ne2000.c +0 -10
-        { },
-    },
-};
-
-static void ne2000_register_types(void)
-{
-    type_register_static(&ne2000_info);
-}
-
-type_init(ne2000_register_types)

Queued, thanks.

Paolo