Skip to contentSkip to conversation

net: phy: sfp: enable i2c-bus detection on ACPI based systems

PATCH In review Ruslan Babayev 6 participants 13 messages May 5, 2019 – May 28, 2019

Subsystems (8)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: phy: sfp: enable i2c-bus detection on ACPI based systems

---
 drivers/i2c/i2c-core-acpi.c |  3 ++-
 drivers/net/phy/sfp.c       | 33 +++++++++++++++++++++++++--------
 include/linux/i2c.h         |  6 ++++++
 3 files changed, 33 insertions(+), 9 deletions(-)
drivers/i2c/i2c-core-acpi.c +2 -1
index 272800692088..964687534754 100644
@@ -337,7 +337,7 @@ static int i2c_acpi_find_match_device(struct device *dev, void *data)
 	return ACPI_COMPANION(dev) == data;
 }
 
-static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 {
 	struct device *dev;
 
@@ -345,6 +345,7 @@ static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 			      i2c_acpi_find_match_adapter);
 	return dev ? i2c_verify_adapter(dev) : NULL;
 }
+EXPORT_SYMBOL_GPL(i2c_acpi_find_adapter_by_handle);
 
 static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
 {
drivers/net/phy/sfp.c +25 -8
index d4635c2178d1..7a6c8df8899b 100644
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/acpi.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/rtnetlink.h>
@@ -1783,6 +1784,7 @@ static int sfp_probe(struct platform_device *pdev)
 {
 	const struct sff_data *sff;
 	struct sfp *sfp;
+	struct i2c_adapter *i2c = NULL;
 	bool poll = false;
 	int irq, err, i;
 
@@ -1801,7 +1803,6 @@ static int sfp_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node) {
 		struct device_node *node = pdev->dev.of_node;
 		const struct of_device_id *id;
-		struct i2c_adapter *i2c;
 		struct device_node *np;
 
 		id = of_match_node(sfp_of_match, node);
@@ -1818,14 +1819,30 @@ static int sfp_probe(struct platform_device *pdev)
 
 		i2c = of_find_i2c_adapter_by_node(np);
 		of_node_put(np);
-		if (!i2c)
-			return -EPROBE_DEFER;
-
-		err = sfp_i2c_configure(sfp, i2c);
-		if (err < 0) {
-			i2c_put_adapter(i2c);
-			return err;
+	} else if (ACPI_COMPANION(&pdev->dev)) {
+		struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+		struct fwnode_handle *fw = acpi_fwnode_handle(adev);
+		struct fwnode_reference_args args;
+		struct acpi_handle *acpi_handle;
+		int ret;
+
+		ret = acpi_node_get_property_reference(fw, "i2c-bus", 0, &args);
+		if (ACPI_FAILURE(ret) || !is_acpi_device_node(args.fwnode)) {
+			dev_err(&pdev->dev, "missing 'i2c-bus' property\n");
+			return -ENODEV;
 		}
+
+		acpi_handle = ACPI_HANDLE_FWNODE(args.fwnode);
+		i2c = i2c_acpi_find_adapter_by_handle(acpi_handle);
+	}
+
+	if (!i2c)
+		return -EPROBE_DEFER;
+
+	err = sfp_i2c_configure(sfp, i2c);
+	if (err < 0) {
+		i2c_put_adapter(i2c);
+		return err;
 	}
 
 	for (i = 0; i < GPIO_MAX; i++)
include/linux/i2c.h +6 -0
index 383510b4f083..24859a26f167 100644
@@ -33,6 +33,7 @@
 #include <linux/rtmutex.h>
 #include <linux/irqdomain.h>		/* for Host Notify IRQ */
 #include <linux/of.h>		/* for struct device_node */
+#include <linux/acpi.h>		/* for acpi_handle */
 #include <linux/swab.h>		/* for swab16 */
 #include <uapi/linux/i2c.h>
 
@@ -977,6 +978,7 @@ bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 u32 i2c_acpi_find_bus_speed(struct device *dev);
 struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
 				       struct i2c_board_info *info);
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle);
 #else
 static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 					     struct acpi_resource_i2c_serialbus **i2c)
@@ -992,6 +994,10 @@ static inline struct i2c_client *i2c_acpi_new_device(struct device *dev,
 {
 	return NULL;
 }
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+	return NULL;
+}
 #endif /* CONFIG_ACPI */
 
 #endif /* _LINUX_I2C_H */
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 8 lines · Ruslan Babayev
---
 drivers/i2c/i2c-core-acpi.c |  3 ++-
 drivers/net/phy/sfp.c       | 33 +++++++++++++++++++++++++--------
 include/linux/i2c.h         |  6 ++++++
 3 files changed, 33 insertions(+), 9 deletions(-)

Regarding the formal part:
- It should be [PATCH net-next]
- Commit description is missing (scripts/checkpatch.pl should have complained)

And maybe it would be better to split exporting i2c_acpi_find_adapter_by_handle and extending sfp.c to two patches. If Wolfram acks the i2c patch, then I think the series could go through the netdev tree. Eventually up to David.

#2 lore raw

PATCH 1/2 i2c: acpi: export i2c_acpi_find_adapter_by_handle

In reply to Ruslan Babayev

This allows drivers to lookup i2c adapters on ACPI based systems similar to of_get_i2c_adapter_by_node() with DT based systems.

---
 drivers/i2c/i2c-core-acpi.c | 3 ++-
 include/linux/i2c.h         | 6 ++++++
 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/i2c/i2c-core-acpi.c +2 -1
index 272800692088..964687534754 100644
@@ -337,7 +337,7 @@ static int i2c_acpi_find_match_device(struct device *dev, void *data)
 	return ACPI_COMPANION(dev) == data;
 }
 
-static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 {
 	struct device *dev;
 
@@ -345,6 +345,7 @@ static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 			      i2c_acpi_find_match_adapter);
 	return dev ? i2c_verify_adapter(dev) : NULL;
 }
+EXPORT_SYMBOL_GPL(i2c_acpi_find_adapter_by_handle);
 
 static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
 {
include/linux/i2c.h +6 -0
index 383510b4f083..24859a26f167 100644
@@ -33,6 +33,7 @@
 #include <linux/rtmutex.h>
 #include <linux/irqdomain.h>		/* for Host Notify IRQ */
 #include <linux/of.h>		/* for struct device_node */
+#include <linux/acpi.h>		/* for acpi_handle */
 #include <linux/swab.h>		/* for swab16 */
 #include <uapi/linux/i2c.h>
 
@@ -977,6 +978,7 @@ bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 u32 i2c_acpi_find_bus_speed(struct device *dev);
 struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
 				       struct i2c_board_info *info);
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle);
 #else
 static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 					     struct acpi_resource_i2c_serialbus **i2c)
@@ -992,6 +994,10 @@ static inline struct i2c_client *i2c_acpi_new_device(struct device *dev,
 {
 	return NULL;
 }
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+	return NULL;
+}
 #endif /* CONFIG_ACPI */
 
 #endif /* _LINUX_I2C_H */
Signature · 1 line
2.17.1
#3 lore raw

PATCH 2/2 net: phy: sfp: enable i2c-bus detection on ACPI based systems

In reply to Ruslan Babayev

Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT.

An example DSD describing an SFP on an ACPI based system:

Device (SFP0)

{
    Name (_HID, "PRP0001")
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "sff,sfp" },
            Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
        },
    })
}
---
 drivers/net/phy/sfp.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)
drivers/net/phy/sfp.c +25 -8
index d4635c2178d1..7a6c8df8899b 100644
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/acpi.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/rtnetlink.h>
@@ -1783,6 +1784,7 @@ static int sfp_probe(struct platform_device *pdev)
 {
 	const struct sff_data *sff;
 	struct sfp *sfp;
+	struct i2c_adapter *i2c = NULL;
 	bool poll = false;
 	int irq, err, i;
 
@@ -1801,7 +1803,6 @@ static int sfp_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node) {
 		struct device_node *node = pdev->dev.of_node;
 		const struct of_device_id *id;
-		struct i2c_adapter *i2c;
 		struct device_node *np;
 
 		id = of_match_node(sfp_of_match, node);
@@ -1818,14 +1819,30 @@ static int sfp_probe(struct platform_device *pdev)
 
 		i2c = of_find_i2c_adapter_by_node(np);
 		of_node_put(np);
-		if (!i2c)
-			return -EPROBE_DEFER;
-
-		err = sfp_i2c_configure(sfp, i2c);
-		if (err < 0) {
-			i2c_put_adapter(i2c);
-			return err;
+	} else if (ACPI_COMPANION(&pdev->dev)) {
+		struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+		struct fwnode_handle *fw = acpi_fwnode_handle(adev);
+		struct fwnode_reference_args args;
+		struct acpi_handle *acpi_handle;
+		int ret;
+
+		ret = acpi_node_get_property_reference(fw, "i2c-bus", 0, &args);
+		if (ACPI_FAILURE(ret) || !is_acpi_device_node(args.fwnode)) {
+			dev_err(&pdev->dev, "missing 'i2c-bus' property\n");
+			return -ENODEV;
 		}
+
+		acpi_handle = ACPI_HANDLE_FWNODE(args.fwnode);
+		i2c = i2c_acpi_find_adapter_by_handle(acpi_handle);
+	}
+
+	if (!i2c)
+		return -EPROBE_DEFER;
+
+	err = sfp_i2c_configure(sfp, i2c);
+	if (err < 0) {
+		i2c_put_adapter(i2c);
+		return err;
 	}
 
 	for (i = 0; i < GPIO_MAX; i++)
Signature · 1 line
2.17.1
maintainer
#4 lore raw
Quoted 18 lines · Ruslan Babayev

Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT.

An example DSD describing an SFP on an ACPI based system:

Device (SFP0)

{
    Name (_HID, "PRP0001")
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "sff,sfp" },
            Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
        },
    })
}
Quoted 6 lines
---
 drivers/net/phy/sfp.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

If we have a patch series touching more than one sub-system a typical approach is:
- Send series to all persons / lists being responsible for the affected subsystems
- Maintainers will agree through which tree the series will go
- Maintainers of the other subsystems will ACK their respective patches of the series

I just received patch 2/2. The complete series (cover letter + two patches) should have gone to i2c and phylib maintainers + lists.

As an additional hint regarding the commit message:
I suppose you added this code to support a specific device. Wouldn't hurt if you mention which device it is.

#5 lore raw

PATCH v2 1/2 i2c: acpi: export i2c_acpi_find_adapter_by_handle

In reply to Ruslan Babayev

This allows drivers to lookup i2c adapters on ACPI based systems similar to of_get_i2c_adapter_by_node() with DT based systems.

---
 drivers/i2c/i2c-core-acpi.c | 3 ++-
 include/linux/i2c.h         | 6 ++++++
 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/i2c/i2c-core-acpi.c +2 -1
index 272800692088..964687534754 100644
@@ -337,7 +337,7 @@ static int i2c_acpi_find_match_device(struct device *dev, void *data)
 	return ACPI_COMPANION(dev) == data;
 }
 
-static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 {
 	struct device *dev;
 
@@ -345,6 +345,7 @@ static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 			      i2c_acpi_find_match_adapter);
 	return dev ? i2c_verify_adapter(dev) : NULL;
 }
+EXPORT_SYMBOL_GPL(i2c_acpi_find_adapter_by_handle);
 
 static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
 {
include/linux/i2c.h +6 -0
index 1308126fc384..78f7d39ea5bc 100644
@@ -21,6 +21,7 @@
 #include <linux/rtmutex.h>
 #include <linux/irqdomain.h>		/* for Host Notify IRQ */
 #include <linux/of.h>		/* for struct device_node */
+#include <linux/acpi.h>		/* for acpi_handle */
 #include <linux/swab.h>		/* for swab16 */
 #include <uapi/linux/i2c.h>
 
@@ -981,6 +982,7 @@ bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 u32 i2c_acpi_find_bus_speed(struct device *dev);
 struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
 				       struct i2c_board_info *info);
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle);
 #else
 static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 					     struct acpi_resource_i2c_serialbus **i2c)
@@ -996,6 +998,10 @@ static inline struct i2c_client *i2c_acpi_new_device(struct device *dev,
 {
 	return NULL;
 }
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+	return NULL;
+}
 #endif /* CONFIG_ACPI */
 
 #endif /* _LINUX_I2C_H */
Signature · 1 line
2.17.1
#6 lore raw

Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle

include/linux/i2c.h static inline struct i2c_client *i2c_acpi_new_device(struct device *dev, · line 1001

Quoted 9 lines · Ruslan Babayev
include/linux/i2c.h +2 -0
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle);
 #else
 static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 					     struct acpi_resource_i2c_serialbus **i2c)
@@ -996,6 +998,10 @@ static inline struct i2c_client *i2c_acpi_new_device(struct device *dev,
 {
 	return NULL;
 }
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)

This should be static inline, I think.

Quoted 8 lines
include/linux/i2c.h +3 -0
+{
+	return NULL;
+}
 #endif /* CONFIG_ACPI */
 
 #endif /* _LINUX_I2C_H */
Signature · 1 line
2.17.1
#7 lore raw

Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle

Quoted 13 lines · Mika Westerberg

include/linux/i2c.h static inline struct i2c_client *i2c_acpi_new_device(struct device *dev, · line 1001

Quoted 9 lines · Ruslan Babayev
include/linux/i2c.h +2 -0
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle);
 #else
 static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
 					     struct acpi_resource_i2c_serialbus **i2c)
@@ -996,6 +998,10 @@ static inline struct i2c_client *i2c_acpi_new_device(struct device *dev,
 {
 	return NULL;
 }
+struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)

This should be static inline, I think.

Quoted 8 lines
Quoted 8 lines
include/linux/i2c.h +3 -0
+{
+	return NULL;
+}
 #endif /* CONFIG_ACPI */
 
 #endif /* _LINUX_I2C_H */
Signature · 1 line
2.17.1

Thanks Mika, will make the change and repost the patches.

#8 lore raw

Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle

In reply to Ruslan Babayev
Quoted 5 lines · Ruslan Babayev

This allows drivers to lookup i2c adapters on ACPI based systems similar to of_get_i2c_adapter_by_node() with DT based systems.

Please have a look how your patches look in my inbox:

May 05 Ruslan Babayev  ( 129) [PATCH] net: phy: sfp: enable i2c-bus detection on ACPI based systems
May 05 Ruslan Babayev  (  65) ├─>[PATCH 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 24 Ruslan Babayev  (  65) └─>[PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 05 Ruslan Babayev  (  65) [PATCH net-next 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 06 Ruslan Babayev  (   3) ├─>[PATCH RFC v2 net-next] Enable SFP support on ACPI
May 06 Ruslan Babayev  (  65) ├─>[PATCH RFC v2 net-next 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 06 Ruslan Babayev  ( 120) └─>[PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
May 07 Ruslan Babayev  ( 154)   └─&─>
May 07 Ruslan Babayev  (  10)     └─>
May 22 Ruslan Babayev  (  29)       └─>
May 05 Ruslan Babayev  (  93) [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
May 06 Ruslan Babayev  (  25) ├─&─>
May 06 Ruslan Babayev  (  99) └─&─>

This is highly confusing, and super hard to find out which patches belong together. v2 2/2 seems even missing. Please resend this as a new series without any in-reply-to, and a fresh cover-letter, so I know which one to apply to my tree.

Thanks,

Wolfram

#9 lore raw

Re: [PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle

Quoted 23 lines · Wolfram Sang
Quoted 5 lines · Ruslan Babayev

This allows drivers to lookup i2c adapters on ACPI based systems similar to of_get_i2c_adapter_by_node() with DT based systems.

Please have a look how your patches look in my inbox:

May 05 Ruslan Babayev  ( 129) [PATCH] net: phy: sfp: enable i2c-bus detection on ACPI based systems
May 05 Ruslan Babayev  (  65) ├─>[PATCH 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 24 Ruslan Babayev  (  65) └─>[PATCH net-next v2 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 05 Ruslan Babayev  (  65) [PATCH net-next 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 06 Ruslan Babayev  (   3) ├─>[PATCH RFC v2 net-next] Enable SFP support on ACPI
May 06 Ruslan Babayev  (  65) ├─>[PATCH RFC v2 net-next 1/2] i2c: acpi: export i2c_acpi_find_adapter_by_handle
May 06 Ruslan Babayev  ( 120) └─>[PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
May 07 Ruslan Babayev  ( 154)   └─&─>
May 07 Ruslan Babayev  (  10)     └─>
May 22 Ruslan Babayev  (  29)       └─>
May 05 Ruslan Babayev  (  93) [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems
May 06 Ruslan Babayev  (  25) ├─&─>
May 06 Ruslan Babayev  (  99) └─&─>
Quoted 8 lines

This is highly confusing, and super hard to find out which patches belong together. v2 2/2 seems even missing. Please resend this as a new series without any in-reply-to, and a fresh cover-letter, so I know which one to apply to my tree.

Thanks,

Wolfram

Will do, sorry about that.

#10 lore raw

PATCH v2 2/2 net: phy: sfp: enable i2c-bus detection on ACPI based systems

In reply to Ruslan Babayev

Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT.

An example DSD describing an SFP on an ACPI based system:

Device (SFP0)

{
    Name (_HID, "PRP0001")
    Name (_CRS, ResourceTemplate()
    {
        GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone,
               "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer)
            { 0, 1, 2, 3, 4 }
    })
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "sff,sfp" },
            Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
            Package () { "maximum-power-milliwatt", 1000 },
            Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} },
            Package () { "reset-gpio",       Package () { ^SFP0, 0, 1, 1} },
            Package () { "mod-def0-gpios",   Package () { ^SFP0, 0, 2, 1} },
            Package () { "tx-fault-gpios",   Package () { ^SFP0, 0, 3, 0} },
            Package () { "los-gpios",        Package () { ^SFP0, 0, 4, 1} },
        },
    })
}

Device (PHY0)

{
    Name (_HID, "PRP0001")
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "ethernet-phy-ieee802.3-c45" },
            Package () { "sfp", \_SB.PCI0.RP01.SFP0 },
            Package () { "managed", "in-band-status" },
            Package () { "phy-mode", "sgmii" },
        },
    })
}
---
 drivers/net/phy/sfp.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)
drivers/net/phy/sfp.c +25 -8
index d4635c2178d1..7a6c8df8899b 100644
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/acpi.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/rtnetlink.h>
@@ -1783,6 +1784,7 @@ static int sfp_probe(struct platform_device *pdev)
 {
 	const struct sff_data *sff;
 	struct sfp *sfp;
+	struct i2c_adapter *i2c = NULL;
 	bool poll = false;
 	int irq, err, i;
 
@@ -1801,7 +1803,6 @@ static int sfp_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node) {
 		struct device_node *node = pdev->dev.of_node;
 		const struct of_device_id *id;
-		struct i2c_adapter *i2c;
 		struct device_node *np;
 
 		id = of_match_node(sfp_of_match, node);
@@ -1818,14 +1819,30 @@ static int sfp_probe(struct platform_device *pdev)
 
 		i2c = of_find_i2c_adapter_by_node(np);
 		of_node_put(np);
-		if (!i2c)
-			return -EPROBE_DEFER;
-
-		err = sfp_i2c_configure(sfp, i2c);
-		if (err < 0) {
-			i2c_put_adapter(i2c);
-			return err;
+	} else if (ACPI_COMPANION(&pdev->dev)) {
+		struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+		struct fwnode_handle *fw = acpi_fwnode_handle(adev);
+		struct fwnode_reference_args args;
+		struct acpi_handle *acpi_handle;
+		int ret;
+
+		ret = acpi_node_get_property_reference(fw, "i2c-bus", 0, &args);
+		if (ACPI_FAILURE(ret) || !is_acpi_device_node(args.fwnode)) {
+			dev_err(&pdev->dev, "missing 'i2c-bus' property\n");
+			return -ENODEV;
 		}
+
+		acpi_handle = ACPI_HANDLE_FWNODE(args.fwnode);
+		i2c = i2c_acpi_find_adapter_by_handle(acpi_handle);
+	}
+
+	if (!i2c)
+		return -EPROBE_DEFER;
+
+	err = sfp_i2c_configure(sfp, i2c);
+	if (err < 0) {
+		i2c_put_adapter(i2c);
+		return err;
 	}
 
 	for (i = 0; i < GPIO_MAX; i++)
Signature · 1 line
2.17.1
maintainer Reviewed-by on v2 2/2
#11 lore raw
Quoted 45 lines · Ruslan Babayev

Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT.

An example DSD describing an SFP on an ACPI based system:

Device (SFP0)

{
    Name (_HID, "PRP0001")
    Name (_CRS, ResourceTemplate()
    {
        GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone,
               "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer)
            { 0, 1, 2, 3, 4 }
    })
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "sff,sfp" },
            Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
            Package () { "maximum-power-milliwatt", 1000 },
            Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} },
            Package () { "reset-gpio",       Package () { ^SFP0, 0, 1, 1} },
            Package () { "mod-def0-gpios",   Package () { ^SFP0, 0, 2, 1} },
            Package () { "tx-fault-gpios",   Package () { ^SFP0, 0, 3, 0} },
            Package () { "los-gpios",        Package () { ^SFP0, 0, 4, 1} },
        },
    })
}

Device (PHY0)

{
    Name (_HID, "PRP0001")
    Name (_DSD, Package ()
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package () {
            Package () { "compatible", "ethernet-phy-ieee802.3-c45" },
            Package () { "sfp", \_SB.PCI0.RP01.SFP0 },
            Package () { "managed", "in-band-status" },
            Package () { "phy-mode", "sgmii" },
        },
    })
}
Quoted 2 lines

Andrew

maintainer
#12 lore raw
In reply to Ruslan Babayev

From: Ruslan Babayev <[email protected]>
Date: Fri, 24 May 2019 17:53:02 -0700

Quoted 4 lines

Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT.

An example DSD describing an SFP on an ACPI based system:

I don't see patch #1.

Please repost with both patches and your cover letter CC:'d to netdev.