Skip to contentSkip to conversation

iio: adc: xilinx: fix potential use-after-free on remove

PATCH New Sasha Levin 1 participant 14 messages May 7, 2019

Subsystems (11)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/14 iio: adc: xilinx: fix potential use-after-free on remove

From: Sven Van Asbroeck <[email protected]>

[ Upstream commit 62039b6aef63380ba7a37c113bbaeee8a55c5342 ]

When cancel_delayed_work() returns, the delayed work may still be running. This means that the core could potentially free the private structure (struct xadc) while the delayed work is still using it. This is a potential use-after-free.

Fix by calling cancel_delayed_work_sync(), which waits for any residual work to finish before returning.

---
 drivers/iio/adc/xilinx-xadc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/xilinx-xadc-core.c +1 -1
index 475c5a74f2d1..6398e86a272b 100644
@@ -1299,7 +1299,7 @@ static int xadc_remove(struct platform_device *pdev)
 	}
 	free_irq(irq, indio_dev);
 	clk_disable_unprepare(xadc->clk);
-	cancel_delayed_work(&xadc->zynq_unmask_work);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 	kfree(xadc->data);
 	kfree(indio_dev->channels);
 
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/14 HID: input: add mapping for Expose/Overview key

From: Dmitry Torokhov <[email protected]>

[ Upstream commit 96dd86871e1fffbc39e4fa61c9c75ec54ee9af0f ]

According to HUTRR77 usage 0x29f from the consumer page is reserved for the Desktop application to present all running user’s application windows. Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's add the mapping.

---
 drivers/hid/hid-input.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/hid/hid-input.c +2 -0
index 8d74e691ac90..01b41ff43056 100644
@@ -913,6 +913,8 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x2cb: map_key_clear(KEY_KBDINPUTASSIST_ACCEPT);	break;
 		case 0x2cc: map_key_clear(KEY_KBDINPUTASSIST_CANCEL);	break;
 
+		case 0x29f: map_key_clear(KEY_SCALE);		break;
+
 		default: map_key_clear(KEY_UNKNOWN);
 		}
 		break;
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/14 HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys

In reply to Sasha Levin

From: Dmitry Torokhov <[email protected]>

[ Upstream commit 7975a1d6a7afeb3eb61c971a153d24dd8fa032f3 ]

According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page correspond to Brightness Up/Down/Toggle keys, so let's add the mappings.

---
 drivers/hid/hid-input.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/hid/hid-input.c +4 -0
index 01b41ff43056..ee3c66c02043 100644
@@ -783,6 +783,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x074: map_key_clear(KEY_BRIGHTNESS_MAX);		break;
 		case 0x075: map_key_clear(KEY_BRIGHTNESS_AUTO);		break;
 
+		case 0x079: map_key_clear(KEY_KBDILLUMUP);	break;
+		case 0x07a: map_key_clear(KEY_KBDILLUMDOWN);	break;
+		case 0x07c: map_key_clear(KEY_KBDILLUMTOGGLE);	break;
+
 		case 0x082: map_key_clear(KEY_VIDEO_NEXT);	break;
 		case 0x083: map_key_clear(KEY_LAST);		break;
 		case 0x084: map_key_clear(KEY_ENTER);		break;
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/14 libnvdimm/btt: Fix a kmemdup failure check

In reply to Sasha Levin

From: Aditya Pakki <[email protected]>

[ Upstream commit 486fa92df4707b5df58d6508728bdb9321a59766 ]

In case kmemdup fails, the fix releases resources and returns to avoid the NULL pointer dereference.

---
 drivers/nvdimm/btt_devs.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)
drivers/nvdimm/btt_devs.c +13 -5
index cb477518dd0e..4c129450495d 100644
@@ -170,14 +170,15 @@ static struct device *__nd_btt_create(struct nd_region *nd_region,
 		return NULL;
 
 	nd_btt->id = ida_simple_get(&nd_region->btt_ida, 0, 0, GFP_KERNEL);
-	if (nd_btt->id < 0) {
-		kfree(nd_btt);
-		return NULL;
-	}
+	if (nd_btt->id < 0)
+		goto out_nd_btt;
 
 	nd_btt->lbasize = lbasize;
-	if (uuid)
+	if (uuid) {
 		uuid = kmemdup(uuid, 16, GFP_KERNEL);
+		if (!uuid)
+			goto out_put_id;
+	}
 	nd_btt->uuid = uuid;
 	dev = &nd_btt->dev;
 	dev_set_name(dev, "btt%d.%d", nd_region->id, nd_btt->id);
@@ -192,6 +193,13 @@ static struct device *__nd_btt_create(struct nd_region *nd_region,
 		return NULL;
 	}
 	return dev;
+
+out_put_id:
+	ida_simple_remove(&nd_region->btt_ida, nd_btt->id);
+
+out_nd_btt:
+	kfree(nd_btt);
+	return NULL;
 }
 
 struct device *nd_btt_create(struct nd_region *nd_region)
Signature · 6 lines
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
author maintainer
#4 lore raw

PATCH 5/14 s390/dasd: Fix capacity calculation for large volumes

In reply to Sasha Levin

From: Peter Oberparleiter <[email protected]>

[ Upstream commit 2cc9637ce825f3a9f51f8f78af7474e9e85bfa5f ]

The DASD driver incorrectly limits the maximum number of blocks of ECKD DASD volumes to 32 bit numbers. Volumes with a capacity greater than 2^32-1 blocks are incorrectly recognized as smaller volumes.

This results in the following volume capacity limits depending on the formatted block size:

  BLKSIZE  MAX_GB   MAX_CYL
      512    2047   5843492
     1024    4095   8676701
     2048    8191  13634816
     4096   16383  23860929

The same problem occurs when a volume with more than 17895697 cylinders is accessed in raw-track-access mode.

Fix this problem by adding an explicit type cast when calculating the maximum number of blocks.

---
 drivers/s390/block/dasd_eckd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/s390/block/dasd_eckd.c +3 -3
index 80a43074c2f9..c530610f61ac 100644
@@ -2066,14 +2066,14 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
 
 raw:
-	block->blocks = (private->real_cyl *
+	block->blocks = ((unsigned long) private->real_cyl *
 			  private->rdc_data.trk_per_cyl *
 			  blk_per_trk);
 
 	dev_info(&device->cdev->dev,
-		 "DASD with %d KB/block, %d KB total size, %d KB/track, "
+		 "DASD with %u KB/block, %lu KB total size, %u KB/track, "
 		 "%s\n", (block->bp_block >> 10),
-		 ((private->real_cyl *
+		 (((unsigned long) private->real_cyl *
 		   private->rdc_data.trk_per_cyl *
 		   blk_per_trk * (block->bp_block >> 9)) >> 1),
 		 ((blk_per_trk * block->bp_block) >> 10),
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/14 Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ

In reply to Sasha Levin

From: Anson Huang <[email protected]>

[ Upstream commit bf2a7ca39fd3ab47ef71c621a7ee69d1813b1f97 ]

SNVS IRQ is requested before necessary driver data initialized, if there is a pending IRQ during driver probe phase, kernel NULL pointer panic will occur in IRQ handler. To avoid such scenario, just initialize necessary driver data before enabling IRQ. This patch is inspired by NXP's internal kernel tree.

Fixes d3dc6e232215 ("input: keyboard: imx: add snvs power key driver")
---
 drivers/input/keyboard/snvs_pwrkey.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/input/keyboard/snvs_pwrkey.c +3 -3
index 9adf13a5864a..57143365e945 100644
@@ -156,6 +156,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		return error;
 	}
 
+	pdata->input = input;
+	platform_set_drvdata(pdev, pdata);
+
 	error = devm_request_irq(&pdev->dev, pdata->irq,
 			       imx_snvs_pwrkey_interrupt,
 			       0, pdev->name, pdev);
@@ -172,9 +175,6 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		return error;
 	}
 
-	pdata->input = input;
-	platform_set_drvdata(pdev, pdata);
-
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/14 s390/3270: fix lockdep false positive on view->lock

In reply to Sasha Levin

From: Martin Schwidefsky <[email protected]>

[ Upstream commit 5712f3301a12c0c3de9cc423484496b0464f2faf ]

The spinlock in the raw3270_view structure is used by con3270, tty3270 and fs3270 in different ways. For con3270 the lock can be acquired in irq context, for tty3270 and fs3270 the highest context is bh.

Lockdep sees the view->lock as a single class and if the 3270 driver is used for the console the following message is generated:

WARNING: inconsistent lock state
5.1.0-rc3-05157-g5c168033979d #12 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
swapper/0/1 [HC0[0]:SC1[1]:HE1:SE0] takes:
(____ptrval____) (&(&view->lock)->rlock){?.-.}, at: tty3270_update+0x7c/0x330

Introduce a lockdep subclass for the view lock to distinguish bh from irq locks.

---
 drivers/s390/char/con3270.c | 2 +-
 drivers/s390/char/fs3270.c  | 3 ++-
 drivers/s390/char/raw3270.c | 3 ++-
 drivers/s390/char/raw3270.h | 4 +++-
 drivers/s390/char/tty3270.c | 3 ++-
 5 files changed, 10 insertions(+), 5 deletions(-)
drivers/s390/char/con3270.c +1 -1
index bae98521c808..3e5a7912044f 100644
@@ -627,7 +627,7 @@ con3270_init(void)
 		     (void (*)(unsigned long)) con3270_read_tasklet,
 		     (unsigned long) condev->read);
 
-	raw3270_add_view(&condev->view, &con3270_fn, 1);
+	raw3270_add_view(&condev->view, &con3270_fn, 1, RAW3270_VIEW_LOCK_IRQ);
 
 	INIT_LIST_HEAD(&condev->freemem);
 	for (i = 0; i < CON3270_STRING_PAGES; i++) {
drivers/s390/char/fs3270.c +2 -1
index 71e974738014..f0c86bcbe316 100644
@@ -463,7 +463,8 @@ fs3270_open(struct inode *inode, struct file *filp)
 
 	init_waitqueue_head(&fp->wait);
 	fp->fs_pid = get_pid(task_pid(current));
-	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor);
+	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor,
+			      RAW3270_VIEW_LOCK_BH);
 	if (rc) {
 		fs3270_free_view(&fp->view);
 		goto out;
drivers/s390/char/raw3270.c +2 -1
index 220acb4cbee5..9c350e6d75bf 100644
@@ -956,7 +956,7 @@ raw3270_deactivate_view(struct raw3270_view *view)
  * Add view to device with minor "minor".
  */
 int
-raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
+raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor, int subclass)
 {
 	unsigned long flags;
 	struct raw3270 *rp;
@@ -978,6 +978,7 @@ raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
 		view->cols = rp->cols;
 		view->ascebc = rp->ascebc;
 		spin_lock_init(&view->lock);
+		lockdep_set_subclass(&view->lock, subclass);
 		list_add(&view->list, &rp->view_list);
 		rc = 0;
 		spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
drivers/s390/char/raw3270.h +3 -1
index e1e41c2861fb..5ae54317857a 100644
@@ -155,6 +155,8 @@ struct raw3270_fn {
 struct raw3270_view {
 	struct list_head list;
 	spinlock_t lock;
+#define RAW3270_VIEW_LOCK_IRQ	0
+#define RAW3270_VIEW_LOCK_BH	1
 	atomic_t ref_count;
 	struct raw3270 *dev;
 	struct raw3270_fn *fn;
@@ -163,7 +165,7 @@ struct raw3270_view {
 	unsigned char *ascebc;		/* ascii -> ebcdic table */
 };
 
-int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int);
+int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int, int);
 int raw3270_activate_view(struct raw3270_view *);
 void raw3270_del_view(struct raw3270_view *);
 void raw3270_deactivate_view(struct raw3270_view *);
drivers/s390/char/tty3270.c +2 -1
index e96fc7fd9498..ab95d24b991b 100644
@@ -937,7 +937,8 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
 		return PTR_ERR(tp);
 
 	rc = raw3270_add_view(&tp->view, &tty3270_fn,
-			      tty->index + RAW3270_FIRSTMINOR);
+			      tty->index + RAW3270_FIRSTMINOR,
+			      RAW3270_VIEW_LOCK_BH);
 	if (rc) {
 		tty3270_free_view(tp);
 		return rc;
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/14 KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing

In reply to Sasha Levin

From: Vitaly Kuznetsov <[email protected]>

[ Upstream commit 7a223e06b1a411cef6c4cd7a9b9a33c8d225b10e ]

In __apic_accept_irq() interface trig_mode is int and actually on some code paths it is set above u8:

kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to (1 << 15) & e->msi.data

kvm_apic_local_deliver sets it to reg & (1 << 15).

Fix the immediate issue by making 'tm' into u16. We may also want to adjust __apic_accept_irq() interface and use proper sizes for vector, level, trig_mode but this is not urgent.

---
 arch/x86/kvm/trace.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kvm/trace.h +2 -2
index ab9ae67a80e4..0ec94c6b4757 100644
@@ -434,13 +434,13 @@ TRACE_EVENT(kvm_apic_ipi,
 );
 
 TRACE_EVENT(kvm_apic_accept_irq,
-	    TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec),
+	    TP_PROTO(__u32 apicid, __u16 dm, __u16 tm, __u8 vec),
 	    TP_ARGS(apicid, dm, tm, vec),
 
 	TP_STRUCT__entry(
 		__field(	__u32,		apicid		)
 		__field(	__u16,		dm		)
-		__field(	__u8,		tm		)
+		__field(	__u16,		tm		)
 		__field(	__u8,		vec		)
 	),
 
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/14 tools lib traceevent: Fix missing equality check for strcmp

In reply to Sasha Levin

From: Rikard Falkeborn <[email protected]>

[ Upstream commit f32c2877bcb068a718bb70094cd59ccc29d4d082 ]

There was a missing comparison with 0 when checking if type is "s64" or "u64". Therefore, the body of the if-statement was entered if "type" was "u64" or not "s64", which made the first strcmp() redundant since if type is "u64", it's not "s64".

If type is "s64", the body of the if-statement is not entered but since the remainder of the function consists of if-statements which will not be entered if type is "s64", we will just return "val", which is correct, albeit at the cost of a few more calls to strcmp(), i.e., it will behave just as if the if-statement was entered.

If type is neither "s64" or "u64", the body of the if-statement will be entered incorrectly and "val" returned. This means that any type that is checked after "s64" and "u64" is handled the same way as "s64" and "u64", i.e., the limiting of "val" to fit in for example "s8" is never reached.

This was introduced in the kernel tree when the sources were copied from trace-cmd in commit f7d82350e597 ("tools/events: Add files to create libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei ("Implement typecasting in parser") when the function was introduced, i.e., it has always behaved the wrong way.

Detected by cppcheck.

Cc Tzvetomir Stoyanov <[email protected]>
Fixes f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
---
 tools/lib/traceevent/event-parse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/traceevent/event-parse.c +1 -1
index 743746a3c50d..df3c73e9dea4 100644
@@ -2201,7 +2201,7 @@ eval_type_str(unsigned long long val, const char *type, int pointer)
 		return val & 0xffffffff;
 
 	if (strcmp(type, "u64") == 0 ||
-	    strcmp(type, "s64"))
+	    strcmp(type, "s64") == 0)
 		return val;
 
 	if (strcmp(type, "s8") == 0)
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/14 init: initialize jump labels before command line option parsing

In reply to Sasha Levin

From: Dan Williams <[email protected]>

[ Upstream commit 6041186a32585fc7a1d0f6cfe2f138b05fdc3c82 ]

When a module option, or core kernel argument, toggles a static-key it requires jump labels to be initialized early. While x86, PowerPC, and ARM64 arrange for jump_label_init() to be called before parse_args(), ARM does not.

Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303
  page_alloc_shuffle+0x12c/0x1ac
  static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used
  before call to jump_label_init()
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted
  5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1
  Hardware name: ARM Integrator/CP (Device Tree)
  [<c0011c68>] (unwind_backtrace) from [<c000ec48>] (show_stack+0x10/0x18)
  [<c000ec48>] (show_stack) from [<c07e9710>] (dump_stack+0x18/0x24)
  [<c07e9710>] (dump_stack) from [<c001bb1c>] (__warn+0xe0/0x108)
  [<c001bb1c>] (__warn) from [<c001bb88>] (warn_slowpath_fmt+0x44/0x6c)
  [<c001bb88>] (warn_slowpath_fmt) from [<c0b0c4a8>]
  (page_alloc_shuffle+0x12c/0x1ac)
  [<c0b0c4a8>] (page_alloc_shuffle) from [<c0b0c550>] (shuffle_store+0x28/0x48)
  [<c0b0c550>] (shuffle_store) from [<c003e6a0>] (parse_args+0x1f4/0x350)
  [<c003e6a0>] (parse_args) from [<c0ac3c00>] (start_kernel+0x1c0/0x488)

Move the fallback call to jump_label_init() to occur before parse_args().

The redundant calls to jump_label_init() in other archs are left intact in case they have static key toggling use cases that are even earlier than option parsing.

---
 init/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
init/main.c +2 -2
index 49926d95442f..e88c8cdef6a7 100644
@@ -538,6 +538,8 @@ asmlinkage __visible void __init start_kernel(void)
 	page_alloc_init();
 
 	pr_notice("Kernel command line: %s\n", boot_command_line);
+	/* parameters may set static keys */
+	jump_label_init();
 	parse_early_param();
 	after_dashes = parse_args("Booting kernel",
 				  static_command_line, __start___param,
@@ -547,8 +549,6 @@ asmlinkage __visible void __init start_kernel(void)
 		parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
 			   NULL, set_init_arg);
 
-	jump_label_init();
-
 	/*
 	 * These use large bootmem allocations and must precede
 	 * kmem_cache_init()
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 11/14 ipvs: do not schedule icmp errors from tunnels

In reply to Sasha Levin

From: Julian Anastasov <[email protected]>

[ Upstream commit 0261ea1bd1eb0da5c0792a9119b8655cf33c80a3 ]

We can receive ICMP errors from client or from
tunneling real server. While the former can be
scheduled to real server, the latter should
not be scheduled, they are decapsulated only when
existing connection is found.

Fixes 6044eeffafbe ("ipvs: attempt to schedule icmp packets")
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/ipvs/ip_vs_core.c +1 -1
index ac212542a217..c4509a10ce52 100644
@@ -1484,7 +1484,7 @@ ip_vs_in_icmp(struct netns_ipvs *ipvs, struct sk_buff *skb, int *related,
 	if (!cp) {
 		int v;
 
-		if (!sysctl_schedule_icmp(ipvs))
+		if (ipip || !sysctl_schedule_icmp(ipvs))
 			return NF_ACCEPT;
 
 		if (!ip_vs_try_to_schedule(ipvs, AF_INET, skb, pd, &v, &cp, &ciph))
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/14 s390: ctcm: fix ctcm_new_device error return code

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 27b141fc234a3670d21bd742c35d7205d03cbb3a ]

clang points out that the return code from this function is undefined for one of the error paths:

../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true

      [-Wsometimes-uninitialized]
                if (priv->channel[direction] == NULL) {
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here
        return result;
               ^~~~~~
../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false
                if (priv->channel[direction] == NULL) {
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning
        int result;
                  ^

Make it return -ENODEV here, as in the related failure cases. gcc has a known bug in underreporting some of these warnings when it has already eliminated the assignment of the return code based on some earlier optimization step.

---
 drivers/s390/net/ctcm_main.c | 1 +
 1 file changed, 1 insertion(+)
drivers/s390/net/ctcm_main.c +1 -0
index 05c37d6d4afe..a31821d94677 100644
@@ -1595,6 +1595,7 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
 		if (priv->channel[direction] == NULL) {
 			if (direction == CTCM_WRITE)
 				channel_free(priv->channel[CTCM_READ]);
+			result = -ENODEV;
 			goto out_dev;
 		}
 		priv->channel[direction]->netdev = dev;
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/14 selftests/net: correct the return value for run_netsocktests

In reply to Sasha Levin

From: Po-Hsu Lin <[email protected]>

[ Upstream commit 30c04d796b693e22405c38e9b78e9a364e4c77e6 ]

The run_netsocktests will be marked as passed regardless the actual test result from the ./socket:

    selftests: net: run_netsocktests
    ========================================
    --------------------
    running socket test
    --------------------
    [FAIL]
    ok 1..6 selftests: net: run_netsocktests [PASS]

This is because the test script itself has been successfully executed. Fix this by exit 1 when the test failed.

Signed-off-by Po-Hsu Lin <po-hsu.lin at canonical.com>
Signed-off-by David S. Miller <davem at davemloft.net>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/net/run_netsocktests | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/net/run_netsocktests +1 -1
index 16058bbea7a8..c195b4478662 100755
@@ -6,7 +6,7 @@ echo "--------------------"
 ./socket
 if [ $? -ne 0 ]; then
 	echo "[FAIL]"
+	exit 1
 else
 	echo "[PASS]"
 fi
-
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 14/14 gpu: ipu-v3: dp: fix CSC handling

In reply to Sasha Levin

From: Lucas Stach <[email protected]>

[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ]

Initialize the flow input colorspaces to unknown and reset to that value when the channel gets disabled. This avoids the state getting mixed up with a previous mode.

Also keep the CSC settings for the background flow intact when disabling the foreground flow.

---
 drivers/gpu/ipu-v3/ipu-dp.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/ipu-v3/ipu-dp.c +9 -3
index 98686edbcdbb..33de3a1bac49 100644
@@ -195,7 +195,8 @@ int ipu_dp_setup_channel(struct ipu_dp *dp,
 		ipu_dp_csc_init(flow, flow->foreground.in_cs, flow->out_cs,
 				DP_COM_CONF_CSC_DEF_BOTH);
 	} else {
-		if (flow->foreground.in_cs == flow->out_cs)
+		if (flow->foreground.in_cs == IPUV3_COLORSPACE_UNKNOWN ||
+		    flow->foreground.in_cs == flow->out_cs)
 			/*
 			 * foreground identical to output, apply color
 			 * conversion on background
@@ -261,6 +262,8 @@ void ipu_dp_disable_channel(struct ipu_dp *dp)
 	struct ipu_dp_priv *priv = flow->priv;
 	u32 reg, csc;
 
+	dp->in_cs = IPUV3_COLORSPACE_UNKNOWN;
+
 	if (!dp->foreground)
 		return;
 
@@ -268,8 +271,9 @@ void ipu_dp_disable_channel(struct ipu_dp *dp)
 
 	reg = readl(flow->base + DP_COM_CONF);
 	csc = reg & DP_COM_CONF_CSC_DEF_MASK;
-	if (csc == DP_COM_CONF_CSC_DEF_FG)
-		reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+	reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+	if (csc == DP_COM_CONF_CSC_DEF_BOTH || csc == DP_COM_CONF_CSC_DEF_BG)
+		reg |= DP_COM_CONF_CSC_DEF_BG;
 
 	reg &= ~DP_COM_CONF_FG_EN;
 	writel(reg, flow->base + DP_COM_CONF);
@@ -350,6 +354,8 @@ int ipu_dp_init(struct ipu_soc *ipu, struct device *dev, unsigned long base)
 	mutex_init(&priv->mutex);
 
 	for (i = 0; i < IPUV3_NUM_FLOWS; i++) {
+		priv->flow[i].background.in_cs = IPUV3_COLORSPACE_UNKNOWN;
+		priv->flow[i].foreground.in_cs = IPUV3_COLORSPACE_UNKNOWN;
 		priv->flow[i].foreground.foreground = true;
 		priv->flow[i].base = priv->base + ipu_dp_flow_base[i];
 		priv->flow[i].priv = priv;
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel