Skip to contentSkip to conversation

dt-bindings: display: Document FriendlyELEC HD702E LCD panel

PATCH In review Jagan Teki 2 participants 5 messages May 7, 2019

Subsystems (5)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

PATCH v2 1/3 dt-bindings: display: Document FriendlyELEC HD702E LCD panel

HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM.

Add dt-bindings documentation for it.

Cc Thierry Reding <[email protected]>
Cc Sam Ravnborg <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>

---
Changes for v2:
- separate binding patch from driver
- Add simple-panel compatible as fallback
- Add text info about simple-panel bindings

 .../display/panel/friendlyarm,hd702e.txt      | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt
Documentation/devicetree/bindings/display/panel/friendlyarm,hd702e.txt new file +32 -0
new file mode 100644
index 000000000000..6c9156fc3478
@@ -0,0 +1,32 @@
+FriendlyELEC HD702E 800x1280 LCD panel
+
+HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280
+resolution. It has built in Goodix, GT9271 captive touchscreen
+with backlight adjustable via PWM.
+
+Required properties:
+- compatible: should be "friendlyarm,hd702e"
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LCD panel input.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Example:
+
+	panel {
+		compatible ="friendlyarm,hd702e", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&vcc3v3_sys>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
Signature · 6 lines
2.18.0.321.gffc6fa0e3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author
#1 lore raw

PATCH v2 2/3 drm/panel: simple: Add FriendlyELEC HD702E 800x1280 LCD panel

HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM.

Add support for it.

Cc Thierry Reding <[email protected]>
Cc Sam Ravnborg <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>

---
Changes for v2:
- separate it from binding patch
- sort the match id and compatible

 drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +26 -0
index 9e8218f6a3f2..93274e270663 100644
@@ -1184,6 +1184,29 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };
 
+static const struct drm_display_mode friendlyarm_hd702e_mode = {
+	.clock		= 67185,
+	.hdisplay	= 800,
+	.hsync_start	= 800 + 20,
+	.hsync_end	= 800 + 20 + 24,
+	.htotal		= 800 + 20 + 24 + 20,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 4,
+	.vsync_end	= 1280 + 4 + 8,
+	.vtotal		= 1280 + 4 + 8 + 4,
+	.vrefresh	= 60,
+	.flags		= DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc friendlyarm_hd702e = {
+	.modes = &friendlyarm_hd702e_mode,
+	.num_modes = 1,
+	.size = {
+		.width	= 94,
+		.height	= 151,
+	},
+};
+
 static const struct drm_display_mode giantplus_gpg482739qs5_mode = {
 	.clock = 9000,
 	.hdisplay = 480,
@@ -2637,6 +2660,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "foxlink,fl500wvr00-a0t",
 		.data = &foxlink_fl500wvr00_a0t,
+	}, {
+		.compatible = "friendlyarm,hd702e",
+		.data = &friendlyarm_hd702e,
 	}, {
 		.compatible = "giantplus,gpg482739qs5",
 		.data = &giantplus_gpg482739qs5
Signature · 1 line
2.18.0.321.gffc6fa0e3
#2 lore raw

Re: [PATCH v2 2/3] drm/panel: simple: Add FriendlyELEC HD702E 800x1280 LCD panel

Quoted 6 lines · Jagan Teki

HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM.

Add support for it.

Quoted 7 lines
Cc Thierry Reding <[email protected]>
Cc Sam Ravnborg <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>

Patch applied to drm-misc-next

Sam

author
#3 lore raw

PATCH v2 3/3 arm64: rockchip: rk3399: nanopc-t4: Enable FriendlyELEC HD702E eDP panel

In reply to Jagan Teki

FriendlyELEC HD702E is one of optional LCD panel for NanoPC T4 eDP interface.

It features 800x1280 resolutions, with built in GT9271 captive touchscreen and adjustable backlight via PWM.

eDP panel connections are:
- VCC3V3_SYS: 3.3V panel power supply
- GPIO4_C2: PWM0_BL pin
- GPIO4_D5_LCD_BL_EN: Backlight enable pin
- VCC12V0_SYS: 12V backlight power supply
- Touchscreen connected via I2C4
- GPIO1_C4_TP_INT: touchscreen interrupt pin
- GPIO1_B5_TP_RST: touchscreen reset pin

---
Changes for v2:
- use force-hpd and delete-property for edp
- use generic backlight brightness
- add simple-panel fallback compatible

 .../boot/dts/rockchip/rk3399-nanopc-t4.dts    | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +50 -0
index 931c3dbf1b7d..4cacd09658dc 100644
@@ -46,6 +46,14 @@
 		};
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;	/* GPIO4_D5_LCD_BL_EN */
+		pwms = <&pwm0 0 25000 0>;
+		power-supply = <&vcc12v0_sys>;
+		status = "okay";
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
@@ -64,6 +72,18 @@
 		fan-supply = <&vcc12v0_sys>;
 		pwms = <&pwm1 0 50000 0>;
 	};
+
+	panel {
+		compatible ="friendlyarm,hd702e", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&vcc3v3_sys>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
 };
 
 &cpu_thermal {
@@ -94,6 +114,25 @@
 	};
 };
 
+&edp {
+	status = "okay";
+	force-hpd;
+	/delete-property/ pinctrl-0;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
 &gpu_thermal {
 	trips {
 		gpu_warm: gpu_warm {
@@ -130,6 +169,17 @@
 	};
 };
 
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;	/* GPIO1_C4_TP_INT */
+		reset-gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;	/* GPIO1_B5_TP_RST */
+	};
+};
+
 &sdhci {
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
Signature · 6 lines
2.18.0.321.gffc6fa0e3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#4 lore raw
In reply to Jagan Teki
Quoted 4 lines · Jagan Teki

HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM.

Quoted 8 lines

Add dt-bindings documentation for it.

Cc Thierry Reding <[email protected]>
Cc Sam Ravnborg <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>

Patch applied to drm-misc-next

Sam