4.14.117-stable review
Subsystems (4)
Greg Kroah-Hartman
maintainercover 4.14.117-stable review
This is the start of the stable review cycle for the 4.14.117 release. There are 75 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed 08 May 2019 02:29:19 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.117-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.117-rc1
Jacopo Mondi <[email protected]>
media: v4l2: i2c: ov7670: Fix PLL bypass register values
Nicolas Le Bayon <[email protected]>
i2c: i2c-stm32f7: Fix SDADEL minimum formula
David Müller <[email protected]>
clk: x86: Add system specific quirk to mark clocks as critical
Tony Luck <[email protected]>
x86/mce: Improve error message when kernel cannot recover, p2
Aneesh Kumar K.V <[email protected]>
powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
Ondrej Mosnacek <[email protected]>
selinux: never allow relabeling on context mounts
Dmitry Torokhov <[email protected]>
Input: stmfts - acknowledge that setting brightness is a blocking call
Anson Huang <[email protected]>
Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ
Yuval Avnery <[email protected]>
IB/core: Destroy QP if XRC QP fails
Daniel Jurgens <[email protected]>
IB/core: Fix potential memory leak while creating MAD agents
Daniel Jurgens <[email protected]>
IB/core: Unregister notifier before freeing MAD security
Arnaud Pouliquen <[email protected]>
ASoC: stm32: fix sai driver name initialisation
Bart Van Assche <[email protected]>
scsi: RDMA/srpt: Fix a credit leak for aborted commands
Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix the dac write calculation
Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix the dac read calculation
Jeremy Fertic <[email protected]>
staging: iio: adt7316: allow adt751x to use internal vref for all dacs
Brian Norris <[email protected]>
Bluetooth: btusb: request wake pin with NOAUTOEN
Kim Phillips <[email protected]>
perf/x86/amd: Update generic hardware cache events for Family 17h
Arnd Bergmann <[email protected]>
ARM: iop: don't use using 64-bit DMA masks
Arnd Bergmann <[email protected]>
ARM: orion: don't use using 64-bit DMA masks
Guenter Roeck <[email protected]>
xsysace: Fix error handling in ace_setup
Randy Dunlap <[email protected]>
sh: fix multiple function definition build errors
Mike Kravetz <[email protected]>
hugetlbfs: fix memory leak for resv_map
Catalin Marinas <[email protected]>
kmemleak: powerpc: skip scanning holes in the .bss section
Yonglong Liu <[email protected]>
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
Yonglong Liu <[email protected]>
net: hns: fix ICMP6 neighbor solicitation messages discard problem
Yonglong Liu <[email protected]>
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
Yonglong Liu <[email protected]>
net: hns: Use NAPI_POLL_WEIGHT for hns driver
Liubin Shu <[email protected]>
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
Michael Kelley <[email protected]>
scsi: storvsc: Fix calculation of sub-channel count
Xose Vazquez Perez <[email protected]>
scsi: core: add new RDAC LENOVO/DE_Series device
Louis Taylor <[email protected]>
vfio/pci: use correct format characters
Dmitry Torokhov <[email protected]>
HID: input: add mapping for Assistant key
Alexandre Belloni <[email protected]>
rtc: da9063: set uie_unsupported when relevant
Al Viro <[email protected]>
debugfs: fix use-after-free on symlink traversal
Al Viro <[email protected]>
jffs2: fix use-after-free on symlink traversal
Aaro Koskinen <[email protected]>
net: stmmac: don't log oversized frames
Aaro Koskinen <[email protected]>
net: stmmac: fix dropping of multi-descriptor RX frames
Aaro Koskinen <[email protected]>
net: stmmac: don't overwrite discard_frame status
Aaro Koskinen <[email protected]>
net: stmmac: ratelimit RX error logs
Konstantin Khorenko <[email protected]>
bonding: show full hw address in sysfs for slave entries
Omri Kahalon <[email protected]>
net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands
Arvind Sankar <[email protected]>
igb: Fix WARN_ONCE on runtime suspend
Douglas Anderson <[email protected]>
ARM: dts: rockchip: Fix gpu opp node names for rk3288
Sven Eckelmann <[email protected]>
batman-adv: Reduce tt_global hash refcnt only for removed entry
Sven Eckelmann <[email protected]>
batman-adv: Reduce tt_local hash refcnt only for removed entry
Sven Eckelmann <[email protected]>
batman-adv: Reduce claim hash refcnt only for removed entry
Geert Uytterhoeven <[email protected]>
rtc: sh: Fix invalid alarm warning for non-enabled alarm
He, Bo <[email protected]>
HID: debug: fix race condition with between rdesc_show() and device removal
Kangjie Lu <[email protected]>
HID: logitech: check the return value of create_singlethread_workqueue
Yufen Yu <[email protected]>
nvme-loop: init nvmet_ctrl fatal_err_work when allocate
Minchan Kim <[email protected]>
mm: do not stall register_shrinker()
Alan Stern <[email protected]>
USB: core: Fix bug caused by duplicate interface PM usage counter
Alan Stern <[email protected]>
USB: core: Fix unterminated string returned by usb_string()
Malte Leip <[email protected]>
usb: usbip: fix isoc packet num validation in get_pipe
Alan Stern <[email protected]>
USB: w1 ds2490: Fix bug caused by improper use of altsetting array
Alan Stern <[email protected]>
USB: yurex: Fix protection fault after device removal
Kailang Yang <[email protected]>
ALSA: hda/realtek - Fixed Dell AIO speaker noise
Kailang Yang <[email protected]>
ALSA: hda/realtek - Add new Dell platform for headset mode
Arnd Bergmann <[email protected]>
caif: reduce stack size with KASAN
Mark Rutland <[email protected]>
arm64: only advance singlestep for user instruction traps
Julien Thierry <[email protected]>
arm64: Fix single stepping in kernel traps
Andrey Konovalov <[email protected]>
kasan: prevent compiler from optimizing away memset in tests
Colin Ian King <[email protected]>
kasan: remove redundant initialization of variable 'real_size'
Dan Carpenter <[email protected]>
net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc
Andrew Lunn <[email protected]>
net: phy: marvell: Fix buffer overrun with stats counters
David Howells <[email protected]>
rxrpc: Fix net namespace cleanup
Vasundhara Volam <[email protected]>
bnxt_en: Free short FW command HWRM memory in error path in bnxt_init_one()
Michael Chan <[email protected]>
bnxt_en: Improve multicast address setup logic.
Willem de Bruijn <[email protected]>
packet: validate msg_namelen in send directly
Xin Long <[email protected]>
sctp: avoid running the sctp state machine recursively
Willem de Bruijn <[email protected]>
ipv6: invert flowlabel sharing check in process and user mode
Eric Dumazet <[email protected]>
ipv6/flowlabel: wait rcu grace period before put_pid()
Shmulik Ladkani <[email protected]>
ipv4: ip_do_fragment: Preserve skb_iif during fragmentation
Greg Kroah-Hartman <[email protected]>
ALSA: line6: use dynamic buffers
-------------
Diffstat:
Documentation/driver-api/usb/power-management.rst | 14 ++- Makefile | 4 +- arch/arm/boot/dts/rk3288.dtsi | 12 +-- arch/arm/mach-iop13xx/setup.c | 8 +- arch/arm/mach-iop13xx/tpmi.c | 10 +- arch/arm/plat-iop/adma.c | 6 +- arch/arm/plat-orion/common.c | 4 +- arch/arm64/include/asm/traps.h | 6 ++ arch/arm64/kernel/armv8_deprecated.c | 8 +- arch/arm64/kernel/cpufeature.c | 2 +- arch/arm64/kernel/traps.c | 22 +++- arch/powerpc/kernel/kvm.c | 7 ++ arch/powerpc/mm/slice.c | 10 +- arch/sh/boards/of-generic.c | 4 +- arch/x86/events/amd/core.c | 111 ++++++++++++++++++++- arch/x86/kernel/cpu/mcheck/mce-severity.c | 5 + drivers/block/xsysace.c | 2 + drivers/bluetooth/btusb.c | 2 +- drivers/clk/x86/clk-pmc-atom.c | 14 ++- drivers/hid/hid-debug.c | 5 + drivers/hid/hid-input.c | 1 + drivers/hid/hid-logitech-hidpp.c | 8 +- drivers/i2c/busses/i2c-stm32f7.c | 2 +- drivers/infiniband/core/security.c | 11 +- drivers/infiniband/core/verbs.c | 41 ++++---- drivers/infiniband/ulp/srpt/ib_srpt.c | 11 ++ drivers/input/keyboard/snvs_pwrkey.c | 6 +- drivers/input/touchscreen/stmfts.c | 30 +++--- drivers/media/i2c/ov7670.c | 16 ++- drivers/net/bonding/bond_sysfs_slave.c | 4 +- drivers/net/dsa/bcm_sf2_cfp.c | 6 ++ drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +- drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 33 ++++-- .../net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 12 +-- drivers/net/ethernet/intel/igb/e1000_defines.h | 2 + drivers/net/ethernet/intel/igb/igb_main.c | 57 ++--------- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 +- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 12 ++- drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 +-- drivers/net/phy/marvell.c | 6 +- drivers/nvme/target/core.c | 20 ++-- drivers/platform/x86/pmc_atom.c | 21 ++++ drivers/rtc/rtc-da9063.c | 7 ++ drivers/rtc/rtc-sh.c | 2 +- drivers/scsi/scsi_devinfo.c | 1 + drivers/scsi/scsi_dh.c | 1 + drivers/scsi/storvsc_drv.c | 13 ++- drivers/staging/iio/addac/adt7316.c | 22 ++-- drivers/usb/core/driver.c | 13 --- drivers/usb/core/message.c | 4 +- drivers/usb/misc/yurex.c | 1 + drivers/usb/storage/realtek_cr.c | 13 +-- drivers/usb/usbip/stub_rx.c | 12 +-- drivers/usb/usbip/usbip_common.h | 7 ++ drivers/vfio/pci/vfio_pci.c | 4 +- drivers/w1/masters/ds2490.c | 6 +- fs/debugfs/inode.c | 13 ++- fs/hugetlbfs/inode.c | 20 ++-- fs/jffs2/readinode.c | 5 - fs/jffs2/super.c | 5 +- include/linux/platform_data/x86/clk-pmc-atom.h | 3 + include/linux/usb.h | 2 - include/net/caif/cfpkt.h | 27 +++++ include/net/sctp/command.h | 1 - lib/Makefile | 1 + lib/test_kasan.c | 2 +- mm/kmemleak.c | 16 ++- mm/vmscan.c | 9 ++ net/batman-adv/bridge_loop_avoidance.c | 16 ++- net/batman-adv/translation-table.c | 32 ++++-- net/caif/cfctrl.c | 50 ++++------ net/ipv4/ip_output.c | 1 + net/ipv6/ip6_flowlabel.c | 22 ++-- net/packet/af_packet.c | 24 +++-- net/rxrpc/call_object.c | 32 +++--- net/sctp/sm_sideeffect.c | 29 ------ net/sctp/sm_statefuns.c | 35 +++++-- security/selinux/hooks.c | 40 ++++++-- sound/pci/hda/patch_realtek.c | 9 ++ sound/soc/stm/stm32_sai_sub.c | 2 +- sound/usb/line6/driver.c | 60 ++++++----- sound/usb/line6/podhd.c | 21 ++-- sound/usb/line6/toneport.c | 24 +++-- 86 files changed, 778 insertions(+), 422 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/75 ALSA: line6: use dynamic buffers
From: Greg Kroah-Hartman <[email protected]>
commit e5c812e84f0dece3400d5caf42522287e6ef139f upstream.
The line6 driver uses a lot of USB buffers off of the stack, which is not allowed on many systems, causing the driver to crash on some of them. Fix this up by dynamically allocating the buffers with kmalloc() which allows for proper DMA-able memory.
--- sound/usb/line6/driver.c | 60 ++++++++++++++++++++++++++------------------- sound/usb/line6/podhd.c | 21 +++++++++------ sound/usb/line6/toneport.c | 24 +++++++++++++----- 3 files changed, 65 insertions(+), 40 deletions(-)
sound/usb/line6/driver.c +35 -25
@@ -344,12 +344,16 @@ int line6_read_data(struct usb_line6 *li {struct usb_device *usbdev = line6->usbdev;int ret; -unsigned char len; +unsigned char *len;unsigned count;if (address >0xffff || datalen >0xff )return -EINVAL ; + len =kmalloc (sizeof (*len),GFP_KERNEL ); +if (!len) +return -ENOMEM ; +/* query the serial number: */ ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
@@ -358,7 +362,7 @@ int line6_read_data(struct usb_line6 *liif (ret <0 ) {dev_err (line6->ifcdev,"read request failed (error %d)\n" , ret); -return ret; + goto exit; }/* Wait for data length. We'll get 0xff until length arrives. */
@@ -368,28 +372,29 @@ int line6_read_data(struct usb_line6 *li ret =usb_control_msg (usbdev,usb_rcvctrlpipe (usbdev,0 ),0x67 ,USB_TYPE_VENDOR |USB_RECIP_DEVICE |USB_DIR_IN , -0x0012 ,0x0000 , &len,1 , +0x0012 ,0x0000 , len,1 ,LINE6_TIMEOUT *HZ );if (ret <0 ) {dev_err (line6->ifcdev,"receive length failed (error %d)\n" , ret); -return ret; + goto exit; } -if (len !=0xff ) +if (*len !=0xff )break ; } -if (len ==0xff ) { + ret = -EIO ; +if (*len ==0xff ) {dev_err (line6->ifcdev,"read failed after %d retries\n" , count); -return -EIO ; - }else if (len != datalen) { + goto exit; + }else if (*len != datalen) {/* should be equal or something went wrong */ dev_err (line6->ifcdev,"length mismatch (expected %d, got %d)\n" , - (int )datalen, (int )len); -return -EIO ; + (int )datalen, (int )*len); + goto exit; }/* receive the result: */
@@ -398,12 +403,12 @@ int line6_read_data(struct usb_line6 *li0x0013 ,0x0000 , data, datalen, LINE6_TIMEOUT * HZ); -if (ret <0 ) { +if (ret <0 )dev_err (line6->ifcdev,"read failed (error %d)\n" , ret); -return ret; - } -return 0 ; +exit: +kfree (len); +return ret; }EXPORT_SYMBOL_GPL (line6_read_data);
@@ -415,12 +420,16 @@ int line6_write_data(struct usb_line6 *l {struct usb_device *usbdev = line6->usbdev;int ret; -unsigned char status; +unsigned char *status;int count;if (address >0xffff || datalen >0xffff )return -EINVAL ; + status =kmalloc (sizeof (*status),GFP_KERNEL ); +if (!status) +return -ENOMEM ; + ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, 0x0022, address, data, datalen,
@@ -429,7 +438,7 @@ int line6_write_data(struct usb_line6 *lif (ret <0 ) {dev_err (line6->ifcdev,"write request failed (error %d)\n" , ret); -return ret; + goto exit; }for (count =0 ; count <LINE6_READ_WRITE_MAX_RETRIES ; count++) {
@@ -440,28 +449,29 @@ int line6_write_data(struct usb_line6 *lUSB_TYPE_VENDOR |USB_RECIP_DEVICE |USB_DIR_IN ,0x0012 ,0x0000 , - &status, 1, LINE6_TIMEOUT * HZ); + status, 1, LINE6_TIMEOUT * HZ);if (ret <0 ) {dev_err (line6->ifcdev,"receiving status failed (error %d)\n" , ret); -return ret; + goto exit; } -if (status !=0xff ) +if (*status !=0xff )break ; } -if (status ==0xff ) { +if (*status ==0xff ) {dev_err (line6->ifcdev,"write failed after %d retries\n" , count); -return -EIO ; - }else if (status !=0 ) { + ret = -EIO ; + }else if (*status !=0 ) {dev_err (line6->ifcdev,"write failed (error %d)\n" , ret); -return -EIO ; + ret = -EIO ; } - -return 0 ; +exit: +kfree (status); +return ret; }EXPORT_SYMBOL_GPL (line6_write_data);
sound/usb/line6/podhd.c +12 -9
@@ -224,28 +224,32 @@ static void podhd_startup_start_workqueustatic int podhd_dev_start (struct usb_line6_podhd *pod) {int ret; -u8 init_bytes[8 ]; +u8 *init_bytes;int i;struct usb_device *usbdev = pod->line6.usbdev; + init_bytes =kmalloc (8 ,GFP_KERNEL ); +if (!init_bytes) +return -ENOMEM ; + ret =usb_control_msg (usbdev,usb_sndctrlpipe (usbdev,0 ),0x67 ,USB_TYPE_VENDOR |USB_RECIP_DEVICE |USB_DIR_OUT ,0x11 ,0 ,NULL ,0 ,LINE6_TIMEOUT *HZ );if (ret <0 ) {dev_err (pod->line6.ifcdev,"read request failed (error %d)\n" , ret); -return ret; + goto exit; }/* NOTE: looks like some kind of ping message */ ret =usb_control_msg (usbdev,usb_rcvctrlpipe (usbdev,0 ),0x67 ,USB_TYPE_VENDOR |USB_RECIP_DEVICE |USB_DIR_IN ,0x11 ,0x0 , - &init_bytes,3 ,LINE6_TIMEOUT *HZ ); + init_bytes,3 ,LINE6_TIMEOUT *HZ );if (ret <0 ) {dev_err (pod->line6.ifcdev,"receive length failed (error %d)\n" , ret); -return ret; + goto exit; } pod->firmware_version =
@@ -254,7 +258,7 @@ static int podhd_dev_start(struct usb_lifor (i =0 ; i <=16 ; i++) { ret =line6_read_data (&pod->line6,0xf000 +0x08 * i, init_bytes,8 );if (ret <0 ) -return ret; + goto exit; } ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
@@ -262,10 +266,9 @@ static int podhd_dev_start(struct usb_liUSB_TYPE_STANDARD |USB_RECIP_DEVICE |USB_DIR_OUT ,1 ,0 , NULL, 0, LINE6_TIMEOUT * HZ); -if (ret <0 ) -return ret; - -return 0 ; +exit: +kfree (init_bytes); +return ret; }static void podhd_startup_workqueue (struct work_struct *work)
sound/usb/line6/toneport.c +18 -6
@@ -365,15 +365,20 @@ static bool toneport_has_source_select(s/* Setup Toneport device. */ -static void toneport_setup (struct usb_line6_toneport *toneport) +static int toneport_setup (struct usb_line6_toneport *toneport) { -int ticks; +int *ticks;struct usb_line6 *line6 = &toneport->line6;struct usb_device *usbdev = line6->usbdev; + ticks =kmalloc (sizeof (*ticks),GFP_KERNEL ); +if (!ticks) +return -ENOMEM ; +/* sync time on device with host: */ - ticks = (int )get_seconds (); -line6_write_data (line6,0x80c6 , &ticks,4 ); + *ticks = (int )get_seconds (); +line6_write_data (line6,0x80c6 , ticks,4 ); +kfree (ticks);/* enable device: */ toneport_send_cmd (usbdev,0x0301 ,0x0000 );
@@ -388,6 +393,7 @@ static void toneport_setup(struct usb_litoneport_update_led (toneport);mod_timer (&toneport->timer, jiffies +TONEPORT_PCM_DELAY *HZ ); +return 0 ; }/*
@@ -451,7 +457,9 @@ static int toneport_init(struct usb_linereturn err; } -toneport_setup (toneport); + err =toneport_setup (toneport); +if (err) +return err;/* register audio system: */ return snd_card_register (line6->card);
@@ -463,7 +471,11 @@ static int toneport_init(struct usb_line*/ static int toneport_reset_resume (struct usb_interface *interface) { -toneport_setup (usb_get_intfdata (interface)); +int err; + + err =toneport_setup (usb_get_intfdata (interface)); +if (err) +return err;return line6_resume (interface); }#endif
Greg Kroah-Hartman
maintainerPATCH 2/75 ipv4: ip_do_fragment: Preserve skb_iif during fragmentation
In reply to Greg Kroah-HartmanFrom: Shmulik Ladkani <[email protected]>
[ Upstream commit d2f0c961148f65bc73eda72b9fa3a4e80973cb49 ]
Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb.
As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior.
Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex:
- the correct iif is observed if forwarding path does not involve fragmentation/refragmentation
- a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom
Fix, by preserving skb_iif during 'ip_copy_metadata'.
--- net/ipv4/ip_output.c | 1 + 1 file changed, 1 insertion(+)
net/ipv4/ip_output.c +1 -0
@@ -518,6 +518,7 @@ static void ip_copy_metadata(struct sk_b to->pkt_type = from->pkt_type; to->priority = from->priority; to->protocol = from->protocol; + to->skb_iif = from->skb_iif;skb_dst_drop (to);skb_dst_copy (to, from); to->dev = from->dev;
Greg Kroah-Hartman
maintainerPATCH 3/75 ipv6/flowlabel: wait rcu grace period before put_pid()
In reply to Greg Kroah-HartmanFrom: Eric Dumazet <[email protected]>
[ Upstream commit 6c0afef5fb0c27758f4d52b2210c61b6bd8b4470 ]
syzbot was able to catch a use-after-free read in pid_nr_ns() [1]
ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started.
[1]
BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407
Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087
CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
pid_nr_ns+0x128/0x140 kernel/pid.c:407
ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794
seq_read+0xad3/0x1130 fs/seq_file.c:268
proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227
do_loop_readv_writev fs/read_write.c:701 [inline]
do_loop_readv_writev fs/read_write.c:688 [inline]
do_iter_read+0x4a9/0x660 fs/read_write.c:922
vfs_readv+0xf0/0x160 fs/read_write.c:984
kernel_readv fs/splice.c:358 [inline]
default_file_splice_read+0x475/0x890 fs/splice.c:413
do_splice_to+0x12a/0x190 fs/splice.c:876
splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953
do_splice_direct+0x1da/0x2a0 fs/splice.c:1062
do_sendfile+0x597/0xd00 fs/read_write.c:1443
__do_sys_sendfile64 fs/read_write.c:1498 [inline]
__se_sys_sendfile64 fs/read_write.c:1490 [inline]
__x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9
RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4
R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff
Allocated by task 17543:
save_stack+0x45/0xd0 mm/kasan/common.c:75
set_track mm/kasan/common.c:87 [inline]
__kasan_kmalloc mm/kasan/common.c:497 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
slab_post_alloc_hook mm/slab.h:437 [inline]
slab_alloc mm/slab.c:3393 [inline]
kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
alloc_pid+0x55/0x8f0 kernel/pid.c:168
copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932
copy_process kernel/fork.c:1709 [inline]
_do_fork+0x257/0xfd0 kernel/fork.c:2226
__do_sys_clone kernel/fork.c:2333 [inline]
__se_sys_clone kernel/fork.c:2327 [inline]
__x64_sys_clone+0xbf/0x150 kernel/fork.c:2327
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 7789:
save_stack+0x45/0xd0 mm/kasan/common.c:75
set_track mm/kasan/common.c:87 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
__cache_free mm/slab.c:3499 [inline]
kmem_cache_free+0x86/0x260 mm/slab.c:3765
put_pid.part.0+0x111/0x150 kernel/pid.c:111
put_pid+0x20/0x30 kernel/pid.c:105
fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102
ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:293
The buggy address belongs to the object at ffff888094012a00
which belongs to the cache pid_2 of size 88
The buggy address is located 4 bytes inside of
88-byte region [ffff888094012a00, ffff888094012a58)
The buggy address belongs to the page:
page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080
raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
>ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
^
ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc--- net/ipv6/ip6_flowlabel.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
net/ipv6/ip6_flowlabel.c +12 -6
@@ -94,15 +94,21 @@ static struct ip6_flowlabel *fl_lookup(sreturn fl; } +static void fl_free_rcu (struct rcu_head *head) +{ + struct ip6_flowlabel *fl = container_of(head, struct ip6_flowlabel, rcu); + +if (fl->share ==IPV6_FL_S_PROCESS ) +put_pid (fl->owner.pid); +kfree (fl->opt); +kfree (fl); +} +static void fl_free (struct ip6_flowlabel *fl) { -if (fl) { -if (fl->share ==IPV6_FL_S_PROCESS ) -put_pid (fl->owner.pid); -kfree (fl->opt); -kfree_rcu (fl, rcu); - } +if (fl) +call_rcu (&fl->rcu, fl_free_rcu); }static void fl_release (struct ip6_flowlabel *fl)
Greg Kroah-Hartman
maintainerPATCH 4/75 ipv6: invert flowlabel sharing check in process and user mode
In reply to Greg Kroah-HartmanFrom: Willem de Bruijn <[email protected]>
[ Upstream commit 95c169251bf734aa555a1e8043e4d88ec97a04ec ]
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test.
Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner
--- net/ipv6/ip6_flowlabel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv6/ip6_flowlabel.c +2 -2
@@ -640,9 +640,9 @@ recheck:if (fl1->share ==IPV6_FL_S_EXCL || fl1->share != fl->share || ((fl1->share ==IPV6_FL_S_PROCESS ) && - (fl1->owner.pid == fl->owner.pid)) || + (fl1->owner.pid != fl->owner.pid)) || ((fl1->share ==IPV6_FL_S_USER ) && -uid_eq (fl1->owner.uid, fl->owner.uid))) + !uid_eq (fl1->owner.uid, fl->owner.uid))) goto release; err = -ENOMEM ;
Greg Kroah-Hartman
maintainerPATCH 5/75 sctp: avoid running the sctp state machine recursively
In reply to Greg Kroah-HartmanFrom: Xin Long <[email protected]>
[ Upstream commit fbd019737d71e405f86549fd738f81e2ff3dd073 ]
Ying triggered a call trace when doing an asconf testing:
BUG: scheduling while atomic: swapper/12/0/0x10000100 Call Trace: <IRQ> [<ffffffffa4375904>] dump_stack+0x19/0x1b [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72 [<ffffffffa437b93a>] __schedule+0x9ba/0xa00 [<ffffffffa3cd5326>] __cond_resched+0x26/0x30 [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50 [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200 [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0 [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp] [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp] [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp] [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp] [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp] [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp] [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp]
As it shows, the first sctp_do_sm() running under atomic context (NET_RX softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later, and this flag is supposed to be used in non-atomic context only. Besides, sctp_do_sm() was called recursively, which is not expected.
Vlad tried to fix this recursive call in Commit c0786693404c ("sctp: Fix oops when sending queued ASCONF chunks") by introducing a new command SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will be called in this command again.
To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st sctp_do_sm() directly.
--- include/net/sctp/command.h | 1 - net/sctp/sm_sideeffect.c | 29 ----------------------------- net/sctp/sm_statefuns.c | 35 +++++++++++++++++++++++++++-------- 3 files changed, 27 insertions(+), 38 deletions(-)
include/net/sctp/command.h +0 -1
@@ -104,7 +104,6 @@ enum sctp_verb {SCTP_CMD_T1_RETRAN ,/* Mark for retransmission after T1 timeout */ SCTP_CMD_UPDATE_INITTAG ,/* Update peer inittag */ SCTP_CMD_SEND_MSG ,/* Send the whole use message */ -SCTP_CMD_SEND_NEXT_ASCONF ,/* Send the next ASCONF after ACK */ SCTP_CMD_PURGE_ASCONF_QUEUE ,/* Purge all asconf queues.*/ SCTP_CMD_SET_ASOC ,/* Restore association context */ SCTP_CMD_LAST
net/sctp/sm_sideeffect.c +0 -29
@@ -1092,32 +1092,6 @@ static void sctp_cmd_send_msg(struct sct } -/* Sent the next ASCONF packet currently stored in the association. -* This happens after the ASCONF_ACK was succeffully processed. -*/ -static void sctp_cmd_send_asconf (struct sctp_association *asoc) -{ -struct net *net =sock_net (asoc->base.sk); - -/* Send the next asconf chunk from the addip chunk -* queue. -*/ -if (!list_empty (&asoc->addip_chunk_list)) { -struct list_head *entry = asoc->addip_chunk_list.next; -struct sctp_chunk *asconf =list_entry (entry, - struct sctp_chunk, list); -list_del_init (entry); - -/* Hold the chunk until an ASCONF_ACK is received. */ -sctp_chunk_hold (asconf); -if (sctp_primitive_ASCONF (net, asoc, asconf)) -sctp_chunk_free (asconf); -else - asoc->addip_last_asconf = asconf; - } -} - -/* These three macros allow us to pull the debugging code out of the * main flow of sctp_do_sm() to keep attention focused on the real * functionality there.
@@ -1763,9 +1737,6 @@ static int sctp_cmd_interpreter(enum sct }sctp_cmd_send_msg (asoc, cmd->obj.msg, gfp);break ; -case SCTP_CMD_SEND_NEXT_ASCONF : -sctp_cmd_send_asconf (asoc); -break ;case SCTP_CMD_PURGE_ASCONF_QUEUE :sctp_asconf_queue_teardown (asoc);break ;
net/sctp/sm_statefuns.c +27 -8
@@ -3756,6 +3756,29 @@ enum sctp_disposition sctp_sf_do_asconf(return SCTP_DISPOSITION_CONSUME ; } +static enum sctp_disposition sctp_send_next_asconf ( +struct net *net, +const struct sctp_endpoint *ep, +struct sctp_association *asoc, +const union sctp_subtype type, +struct sctp_cmd_seq *commands) +{ +struct sctp_chunk *asconf; +struct list_head *entry; + +if (list_empty (&asoc->addip_chunk_list)) +return SCTP_DISPOSITION_CONSUME ; + + entry = asoc->addip_chunk_list.next; + asconf = list_entry(entry, struct sctp_chunk, list); + +list_del_init (entry); +sctp_chunk_hold (asconf); + asoc->addip_last_asconf = asconf; + +return sctp_sf_do_prm_asconf (net, ep, asoc, type, asconf, commands); +} +/* * ADDIP Section 4.3 General rules for address manipulation * When building TLV parameters for the ASCONF Chunk that will add or
@@ -3847,14 +3870,10 @@ enum sctp_disposition sctp_sf_do_asconf_ SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));if (!sctp_process_asconf_ack ((struct sctp_association *)asoc, - asconf_ack)) { -/* Successfully processed ASCONF_ACK. We can -* release the next asconf if we have one. -*/ -sctp_add_cmd_sf (commands,SCTP_CMD_SEND_NEXT_ASCONF , -SCTP_NULL ()); -return SCTP_DISPOSITION_CONSUME ; - } + asconf_ack)) +return sctp_send_next_asconf (net, ep, + (struct sctp_association *)asoc, + type, commands); abort =sctp_make_abort (asoc, asconf_ack,sizeof (struct sctp_errhdr ));
Greg Kroah-Hartman
maintainerPATCH 6/75 packet: validate msg_namelen in send directly
In reply to Greg Kroah-HartmanFrom: Willem de Bruijn <[email protected]>
[ Upstream commit 486efdc8f6ce802b27e15921d2353cc740c55451 ]
Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header.
Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len.
Change v1->v2: initialize addr in all paths
--- net/packet/af_packet.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-)
net/packet/af_packet.c +14 -10
@@ -2641,8 +2641,8 @@ static int tpacket_snd(struct packet_socvoid *ph; DECLARE_SOCKADDR(struct sockaddr_ll *, saddr, msg->msg_name);bool need_wait = !(msg->msg_flags &MSG_DONTWAIT ); +unsigned char *addr =NULL ;int tp_len, size_max; -unsigned char *addr;void *data;int len_sum =0 ;int status =TP_STATUS_AVAILABLE ;
@@ -2653,7 +2653,6 @@ static int tpacket_snd(struct packet_socif (likely (saddr ==NULL )) { dev =packet_cached_dev_get (po); proto = po->num; - addr =NULL ; }else { err = -EINVAL ;if (msg->msg_namelen <sizeof (struct sockaddr_ll ))
@@ -2663,10 +2662,13 @@ static int tpacket_snd(struct packet_soc sll_addr))) goto out; proto = saddr->sll_protocol; - addr = saddr->sll_halen ? saddr->sll_addr :NULL ; dev =dev_get_by_index (sock_net (&po->sk), saddr->sll_ifindex); -if (addr && dev && saddr->sll_halen < dev->addr_len) - goto out_put; +if (po->sk.sk_socket->type ==SOCK_DGRAM ) { +if (dev && msg->msg_namelen < dev->addr_len + + offsetof(struct sockaddr_ll , sll_addr)) + goto out_put; + addr = saddr->sll_addr; + } } err = -ENXIO ;
@@ -2838,7 +2840,7 @@ static int packet_snd(struct socket *socstruct sk_buff *skb;struct net_device *dev;__be16 proto; -unsigned char *addr; +unsigned char *addr =NULL ;int err, reserve =0 ;struct sockcm_cookie sockc;struct virtio_net_hdr vnet_hdr = {0 };
@@ -2855,7 +2857,6 @@ static int packet_snd(struct socket *socif (likely (saddr ==NULL )) { dev =packet_cached_dev_get (po); proto = po->num; - addr =NULL ; }else { err = -EINVAL ;if (msg->msg_namelen <sizeof (struct sockaddr_ll ))
@@ -2863,10 +2864,13 @@ static int packet_snd(struct socket *socif (msg->msg_namelen < (saddr->sll_halen + offsetof(struct sockaddr_ll , sll_addr))) goto out; proto = saddr->sll_protocol; - addr = saddr->sll_halen ? saddr->sll_addr :NULL ; dev =dev_get_by_index (sock_net (sk), saddr->sll_ifindex); -if (addr && dev && saddr->sll_halen < dev->addr_len) - goto out_unlock; +if (sock->type ==SOCK_DGRAM ) { +if (dev && msg->msg_namelen < dev->addr_len + + offsetof(struct sockaddr_ll , sll_addr)) + goto out_unlock; + addr = saddr->sll_addr; + } } err = -ENXIO ;
Greg Kroah-Hartman
maintainerPATCH 7/75 bnxt_en: Improve multicast address setup logic.
In reply to Greg Kroah-HartmanFrom: Michael Chan <[email protected]>
[ Upstream commit b4e30e8e7ea1d1e35ffd64ca46f7d9a7f227b4bf ]
The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +8 -1
@@ -6768,8 +6768,15 @@ static int bnxt_cfg_rx_mode(struct bnxt skip_uc: rc =bnxt_hwrm_cfa_l2_set_rx_mask (bp,0 ); +if (rc && vnic->mc_list_count) { +netdev_info (bp->dev,"Failed setting MC filters rc: %d, turning on ALL_MCAST mode\n" , + rc); + vnic->rx_mask |=CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST ; + vnic->mc_list_count =0 ; + rc =bnxt_hwrm_cfa_l2_set_rx_mask (bp,0 ); + }if (rc) -netdev_err (bp->dev,"HWRM cfa l2 rx mask failure rc: %x\n" , +netdev_err (bp->dev,"HWRM cfa l2 rx mask failure rc: %d\n" , rc);return rc;
Greg Kroah-Hartman
maintainerPATCH 8/75 bnxt_en: Free short FW command HWRM memory in error path in bnxt_init_one()
In reply to Greg Kroah-HartmanFrom: Vasundhara Volam <[email protected]>
[ Upstream commit f9099d611449836a51a65f40ea7dc9cb5f2f665e ]
In the bnxt_init_one() error path, short FW command request memory is not freed. This patch fixes it.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -0
@@ -8241,6 +8241,7 @@ init_err_cleanup_tc:bnxt_clear_int_mode (bp); init_err_pci_clean: +bnxt_free_hwrm_short_cmd_req (bp);bnxt_free_hwrm_resources (bp);bnxt_cleanup_pci (bp);
Greg Kroah-Hartman
maintainerPATCH 9/75 rxrpc: Fix net namespace cleanup
In reply to Greg Kroah-HartmanFrom: David Howells <[email protected]>
[ Upstream commit b13023421b5179413421333f602850914f6a7ad8 ]
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0).
To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0.
Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to:
Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk
Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab).
Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls.
--- net/rxrpc/call_object.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-)
net/rxrpc/call_object.c +19 -19
@@ -684,27 +684,27 @@ void rxrpc_destroy_all_calls(struct rxrp_enter ("" ); -if (list_empty (&rxnet->calls)) -return ; - -write_lock (&rxnet->call_lock); +if (!list_empty (&rxnet->calls)) { +write_lock (&rxnet->call_lock); -while (!list_empty (&rxnet->calls)) { - call = list_entry(rxnet->calls.next, struct rxrpc_call, link); -_debug ("Zapping call %p" , call); - -rxrpc_see_call (call); -list_del_init (&call->link); - -pr_err ("Call %p still in use (%d,%s,%lx,%lx)!\n" , - call,atomic_read (&call->usage), - rxrpc_call_states[call->state], - call->flags, call->events); +while (!list_empty (&rxnet->calls)) { + call =list_entry (rxnet->calls.next, + struct rxrpc_call, link); +_debug ("Zapping call %p" , call); + +rxrpc_see_call (call); +list_del_init (&call->link); + +pr_err ("Call %p still in use (%d,%s,%lx,%lx)!\n" , + call,atomic_read (&call->usage), + rxrpc_call_states[call->state], + call->flags, call->events); + +write_unlock (&rxnet->call_lock); +cond_resched (); +write_lock (&rxnet->call_lock); + }write_unlock (&rxnet->call_lock); -cond_resched (); -write_lock (&rxnet->call_lock); } - -write_unlock (&rxnet->call_lock); }
Greg Kroah-Hartman
maintainerPATCH 10/75 net: phy: marvell: Fix buffer overrun with stats counters
In reply to Greg Kroah-HartmanFrom: Andrew Lunn <[email protected]>
[ Upstream commit fdfdf86720a34527f777cbe0d8599bf0528fa146 ]
marvell_get_sset_count() returns how many statistics counters there are. If the PHY supports fibre, there are 3, otherwise two.
marvell_get_strings() does not make this distinction, and always returns 3 strings. This then often results in writing past the end of the buffer for the strings.
--- drivers/net/phy/marvell.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/phy/marvell.c +4 -2
@@ -1497,9 +1497,10 @@ static int marvell_get_sset_count(structstatic void marvell_get_strings (struct phy_device *phydev,u8 *data) { +int count =marvell_get_sset_count (phydev);int i; -for (i =0 ; i <ARRAY_SIZE (marvell_hw_stats); i++) { +for (i =0 ; i < count; i++) {memcpy (data + i *ETH_GSTRING_LEN , marvell_hw_stats[i].string,ETH_GSTRING_LEN ); }
@@ -1536,9 +1537,10 @@ static u64 marvell_get_stat(struct phy_dstatic void marvell_get_stats (struct phy_device *phydev,struct ethtool_stats *stats,u64 *data) { +int count =marvell_get_sset_count (phydev);int i; -for (i =0 ; i <ARRAY_SIZE (marvell_hw_stats); i++) +for (i =0 ; i < count; i++) data[i] =marvell_get_stat (phydev, i); }
Greg Kroah-Hartman
maintainerPATCH 11/75 net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit f949a12fd697479f68d99dc65e9bbab68ee49043 ]
The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc(). We can't pass unclamped values to test_bit() or it results in an out of bounds access beyond the end of the bitmap.
--- drivers/net/dsa/bcm_sf2_cfp.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/dsa/bcm_sf2_cfp.c +6 -0
@@ -130,6 +130,9 @@ static int bcm_sf2_cfp_rule_set(struct d (fs->m_ext.vlan_etype || fs->m_ext.data[1]))return -EINVAL ; +if (fs->location !=RX_CLS_LOC_ANY && fs->location >=CFP_NUM_RULES ) +return -EINVAL ; +if (fs->location !=RX_CLS_LOC_ANY &&test_bit (fs->location, priv->cfp.used))return -EBUSY ;
@@ -330,6 +333,9 @@ static int bcm_sf2_cfp_rule_del(struct bint ret;u32 reg; +if (loc >=CFP_NUM_RULES ) +return -EINVAL ; +/* Refuse deletion of unused rules, and the default reserved rule */ if (!test_bit (loc, priv->cfp.used) || loc ==0 )return -EINVAL ;
Greg Kroah-Hartman
maintainerPATCH 12/75 kasan: remove redundant initialization of variable real_size
In reply to Greg Kroah-HartmanFrom: Colin Ian King <[email protected]>
commit 48c232395431c23d35cf3b4c5a090bd793316578 upstream.
Variable real_size is initialized with a value that is never read, it is re-assigned a new value later on, hence the initialization is redundant and can be removed.
Cleans up clang warning:
lib/test_kasan.c:422:21: warning: Value stored to 'real_size' during its initialization is never read
--- lib/test_kasan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/test_kasan.c +1 -1
@@ -389,7 +389,7 @@ static noinline void __init kasan_stack_ static noinline void __init ksize_unpoisons_memory(void) {char *ptr; -size_t size =123 , real_size = size; +size_t size =123 , real_size;pr_info ("ksize() unpoisons the whole allocated chunk\n" ); ptr =kmalloc (size,GFP_KERNEL );
Greg Kroah-Hartman
maintainerPATCH 13/75 kasan: prevent compiler from optimizing away memset in tests
In reply to Greg Kroah-HartmanFrom: Andrey Konovalov <[email protected]>
commit 69ca372c100fba99c78ef826a1795aa86e4f01a8 upstream.
A compiler can optimize away memset calls by replacing them with mov instructions. There are KASAN tests that specifically test that KASAN correctly handles memset calls so we don't want this optimization to happen.
The solution is to add -fno-builtin flag to test_kasan.ko
--- lib/Makefile | 1 + 1 file changed, 1 insertion(+)
lib/Makefile +1 -0
@@ -50,6 +50,7 @@ obj-$(CONFIG_TEST_FIRMWARE) += test_firm obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o obj-$(CONFIG_TEST_KASAN) += test_kasan.o +CFLAGS_test_kasan.o += -fno-builtin obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o obj-$(CONFIG_TEST_LKM) += test_module.o
Greg Kroah-Hartman
maintainerPATCH 14/75 arm64: Fix single stepping in kernel traps
In reply to Greg Kroah-HartmanFrom: Julien Thierry <[email protected]>
commit 6436beeee5721a8e906e9eabf866f12d04470437 upstream.
Software Step exception is missing after stepping a trapped instruction.
Ensure SPSR.SS gets set to 0 after emulating/skipping a trapped instruction before doing ERET.
--- arch/arm64/include/asm/traps.h | 6 ++++++ arch/arm64/kernel/armv8_deprecated.c | 8 ++++---- arch/arm64/kernel/cpufeature.c | 2 +- arch/arm64/kernel/traps.c | 21 ++++++++++++++++----- 4 files changed, 27 insertions(+), 10 deletions(-)
arch/arm64/include/asm/traps.h +6 -0
@@ -37,6 +37,12 @@ void unregister_undef_hook(struct undef_void arm64_notify_segfault (struct pt_regs *regs,unsigned long addr); +/* +* Move regs->pc to next instruction and do necessary setup before it +* is executed. +*/ +void arm64_skip_faulting_instruction (struct pt_regs *regs,unsigned long size); +static inline int __in_irqentry_text (unsigned long ptr) { return ptr >= (unsigned long)&__irqentry_text_start &&
arch/arm64/kernel/armv8_deprecated.c +4 -4
@@ -431,7 +431,7 @@ ret:pr_warn_ratelimited ("\"%s\" (%ld) uses obsolete SWP{B} instruction at 0x%llx\n" , current->comm, (unsigned long )current->pid, regs->pc); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,4 );return 0 ; fault:
@@ -512,7 +512,7 @@ ret:pr_warn_ratelimited ("\"%s\" (%ld) uses deprecated CP15 Barrier instruction at 0x%llx\n" , current->comm, (unsigned long )current->pid, regs->pc); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,4 );return 0 ; }
@@ -586,14 +586,14 @@ static int compat_setend_handler(structstatic int a32_setend_handler (struct pt_regs *regs,u32 instr) {int rc =compat_setend_handler (regs, (instr >>9 ) &1 ); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,4 );return rc; }static int t16_setend_handler (struct pt_regs *regs,u32 instr) {int rc =compat_setend_handler (regs, (instr >>3 ) &1 ); - regs->pc +=2 ; +arm64_skip_faulting_instruction (regs,2 );return rc; }
arch/arm64/kernel/cpufeature.c +1 -1
@@ -1398,7 +1398,7 @@ static int emulate_mrs(struct pt_regs *rif (!rc) { dst =aarch64_insn_decode_register (AARCH64_INSN_REGTYPE_RT , insn);pt_regs_write_reg (regs, dst, val); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,AARCH64_INSN_SIZE ); }return rc;
arch/arm64/kernel/traps.c +16 -5
@@ -296,6 +296,17 @@ void arm64_notify_die(const char *str, s } } +void arm64_skip_faulting_instruction (struct pt_regs *regs,unsigned long size) +{ + regs->pc += size; + +/* +* If we were single stepping, we want to get the step exception after +* we return from the trap. +*/ +user_fastforward_single_step (current); +} +static LIST_HEAD (undef_hook);static DEFINE_RAW_SPINLOCK (undef_lock);
@@ -483,7 +494,7 @@ static void user_cache_maint_handler(unsif (ret)arm64_notify_segfault (regs, address);else - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,AARCH64_INSN_SIZE ); }static void ctr_read_handler (unsigned int esr,struct pt_regs *regs)
@@ -493,7 +504,7 @@ static void ctr_read_handler(unsigned inpt_regs_write_reg (regs, rt, val); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,AARCH64_INSN_SIZE ); }static void cntvct_read_handler (unsigned int esr,struct pt_regs *regs)
@@ -501,7 +512,7 @@ static void cntvct_read_handler(unsignedint rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;pt_regs_write_reg (regs, rt,arch_counter_get_cntvct ()); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,AARCH64_INSN_SIZE ); }static void cntfrq_read_handler (unsigned int esr,struct pt_regs *regs)
@@ -509,7 +520,7 @@ static void cntfrq_read_handler(unsignedint rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;pt_regs_write_reg (regs, rt,arch_timer_get_rate ()); - regs->pc +=4 ; +arm64_skip_faulting_instruction (regs,AARCH64_INSN_SIZE ); }struct sys64_hook {
@@ -756,7 +767,7 @@ static int bug_handler(struct pt_regs *r }/* If thread survives, skip over the BUG instruction and continue: */ - regs->pc +=AARCH64_INSN_SIZE ;/* skip BRK and resume */ +arm64_skip_faulting_instruction (regs,AARCH64_INSN_SIZE );return DBG_HOOK_HANDLED ; }
Greg Kroah-Hartman
maintainerPATCH 15/75 arm64: only advance singlestep for user instruction traps
In reply to Greg Kroah-HartmanFrom: Mark Rutland <[email protected]>
commit 9478f1927e6ef9ef5e1ad761af1c98aa8e40b7f5 upstream.
Our arm64_skip_faulting_instruction() helper advances the userspace singlestep state machine, but this is also called by the kernel BRK handler, as used for WARN*().
Thus, if we happen to hit a WARN*() while the user singlestep state machine is in the active-no-pending state, we'll advance to the active-pending state without having executed a user instruction, and will take a step exception earlier than expected when we return to userspace.
Let's fix this by only advancing the state machine when skipping a user instruction.
--- arch/arm64/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/kernel/traps.c +2 -1
@@ -304,7 +304,8 @@ void arm64_skip_faulting_instruction(str* If we were single stepping, we want to get the step exception after * we return from the trap. */ -user_fastforward_single_step (current); +if (user_mode (regs)) +user_fastforward_single_step (current); }static LIST_HEAD (undef_hook);
Greg Kroah-Hartman
maintainerPATCH 16/75 caif: reduce stack size with KASAN
In reply to Greg Kroah-HartmanFrom: Arnd Bergmann <[email protected]>
commit ce6289661b14a8b391d90db918c91b6d6da6540a upstream.
When CONFIG_KASAN is set, we can use relatively large amounts of kernel stack space:
net/caif/cfctrl.c:555:1: warning: the frame size of 1600 bytes is larger than 1280 bytes [-Wframe-larger-than=]
This adds convenience wrappers around cfpkt_extr_head(), which is responsible for most of the stack growth. With those wrapper functions, gcc apparently starts reusing the stack slots for each instance, thus avoiding the problem.
--- include/net/caif/cfpkt.h | 27 +++++++++++++++++++++++++ net/caif/cfctrl.c | 50 ++++++++++++++++++++--------------------------- 2 files changed, 49 insertions(+), 28 deletions(-)
include/net/caif/cfpkt.h +27 -0
@@ -32,6 +32,33 @@ void cfpkt_destroy(struct cfpkt *pkt);*/ int cfpkt_extr_head (struct cfpkt *pkt,void *data,u16 len); +static inline u8 cfpkt_extr_head_u8 (struct cfpkt *pkt) +{ +u8 tmp; + +cfpkt_extr_head (pkt, &tmp,1 ); + +return tmp; +} + +static inline u16 cfpkt_extr_head_u16 (struct cfpkt *pkt) +{ +__le16 tmp; + +cfpkt_extr_head (pkt, &tmp,2 ); + +return le16_to_cpu (tmp); +} + +static inline u32 cfpkt_extr_head_u32 (struct cfpkt *pkt) +{ +__le32 tmp; + +cfpkt_extr_head (pkt, &tmp,4 ); + +return le32_to_cpu (tmp); +} +/* * Peek header from packet. * Reads data from packet without changing packet.
net/caif/cfctrl.c +22 -28
152 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 17/75 ALSA: hda/realtek - Add new Dell platform for headset mode
In reply to Greg Kroah-HartmanFrom: Kailang Yang <[email protected]>
commit 0a29c57b76624723b6b00c027e0e992d130ace49 upstream.
Add two Dell platform for headset mode.
[ Note: this is a further correction / addition of the previous
pin-based quirks for Dell machines; another entry for ALC236 with the d-mic pin 0x12 and an entry for ALC295 -- tiwai ]
--- sound/pci/hda/patch_realtek.c | 7 +++++++ 1 file changed, 7 insertions(+)
sound/pci/hda/patch_realtek.c +7 -0
@@ -6745,6 +6745,10 @@ static const struct snd_hda_pin_quirk al {0x21, 0x02211020}),SND_HDA_PIN_QUIRK (0x10ec0236 ,0x1028 ,"Dell" ,ALC255_FIXUP_DELL1_MIC_NO_PRESENCE , {0x21, 0x02211020}), +SND_HDA_PIN_QUIRK (0x10ec0236 ,0x1028 ,"Dell" ,ALC255_FIXUP_DELL1_MIC_NO_PRESENCE , + {0x12, 0x40000000}, + {0x14, 0x90170110}, + {0x21, 0x02211020}),SND_HDA_PIN_QUIRK (0x10ec0255 ,0x1028 ,"Dell" ,ALC255_FIXUP_DELL2_MIC_NO_PRESENCE , {0x14, 0x90170110}, {0x21, 0x02211020}),
@@ -6986,6 +6990,9 @@ static const struct snd_hda_pin_quirk alALC292_STANDARD_PINS , {0x13, 0x90a60140}),SND_HDA_PIN_QUIRK (0x10ec0295 ,0x1028 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE , + {0x14, 0x90170110}, + {0x21, 0x04211020}), +SND_HDA_PIN_QUIRK (0x10ec0295 ,0x1028 ,"Dell" ,ALC269_FIXUP_DELL1_MIC_NO_PRESENCE ,ALC295_STANDARD_PINS , {0x17, 0x21014020}, {0x18, 0x21a19030}),
Greg Kroah-Hartman
maintainerPATCH 18/75 ALSA: hda/realtek - Fixed Dell AIO speaker noise
In reply to Greg Kroah-HartmanFrom: Kailang Yang <[email protected]>
commit 0700d3d117a7f110ddddbd83873e13652f69c54b upstream.
Fixed Dell AIO speaker noise.spec->gen.auto_mute_via_amp = 1, this option was solved speaker white noise at boot.codec->power_save_node = 0, this option was solved speaker noise at resume back.
--- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+)
sound/pci/hda/patch_realtek.c +2 -0
@@ -5294,6 +5294,8 @@ static void alc274_fixup_bind_dacs(strucreturn ; spec->gen.preferred_dacs = preferred_pairs; + spec->gen.auto_mute_via_amp =1 ; + codec->power_save_node =0 ; } static void alc_fixup_disable_mic_vref(struct hda_codec *codec,
Greg Kroah-Hartman
maintainerPATCH 19/75 USB: yurex: Fix protection fault after device removal
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
commit ef61eb43ada6c1d6b94668f0f514e4c268093ff3 upstream.
The syzkaller USB fuzzer found a general-protection-fault bug in the yurex driver. The fault occurs when a device has been unplugged; the driver's interrupt-URB handler logs an error message referring to the device by name, after the device has been unregistered and its name deallocated.
This problem is caused by the fact that the interrupt URB isn't cancelled until the driver's private data structure is released, which can happen long after the device is gone. The cure is to make sure that the interrupt URB is killed before yurex_disconnect() returns; this is exactly the sort of thing that usb_poison_urb() was meant for.
--- drivers/usb/misc/yurex.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/misc/yurex.c +1 -0
@@ -318,6 +318,7 @@ static void yurex_disconnect(struct usb_usb_deregister_dev (interface, &yurex_class);/* prevent more I/O from starting */ +usb_poison_urb (dev->urb);mutex_lock (&dev->io_mutex); dev->interface =NULL ;mutex_unlock (&dev->io_mutex);
Greg Kroah-Hartman
maintainerPATCH 20/75 USB: w1 ds2490: Fix bug caused by improper use of altsetting array
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream.
The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings.
The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry.
--- drivers/w1/masters/ds2490.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/w1/masters/ds2490.c +3 -3
@@ -1018,15 +1018,15 @@ static int ds_probe(struct usb_interface/* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */ alt =3 ; err =usb_set_interface (dev->udev, - intf->altsetting[alt].desc.bInterfaceNumber, alt); + intf->cur_altsetting->desc.bInterfaceNumber, alt);if (err) {dev_err (&dev->udev->dev,"Failed to set alternative setting %d " "for %d interface: err=%d.\n" , alt, - intf->altsetting[alt].desc.bInterfaceNumber, err); + intf->cur_altsetting->desc.bInterfaceNumber, err); goto err_out_clear; } - iface_desc = &intf->altsetting[alt]; + iface_desc = intf->cur_altsetting;if (iface_desc->desc.bNumEndpoints !=NUM_EP -1 ) {pr_info ("Num endpoints=%d. It is not DS9490R.\n" , iface_desc->desc.bNumEndpoints);
Greg Kroah-Hartman
maintainerPATCH 21/75 usb: usbip: fix isoc packet num validation in get_pipe
In reply to Greg Kroah-HartmanFrom: Malte Leip <[email protected]>
commit c409ca3be3c6ff3a1eeb303b191184e80d412862 upstream.
Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c
Background/reason:
The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver.
--- drivers/usb/usbip/stub_rx.c | 12 +++--------- drivers/usb/usbip/usbip_common.h | 7 +++++++ 2 files changed, 10 insertions(+), 9 deletions(-)
drivers/usb/usbip/stub_rx.c +3 -9
@@ -383,16 +383,10 @@ static int get_pipe(struct stub_device * }if (usb_endpoint_xfer_isoc (epd)) { -/* validate packet size and number of packets */ -unsigned int maxp, packets, bytes; - - maxp =usb_endpoint_maxp (epd); - maxp *=usb_endpoint_maxp_mult (epd); - bytes = pdu->u.cmd_submit.transfer_buffer_length; - packets =DIV_ROUND_UP (bytes, maxp); - +/* validate number of packets */ if (pdu->u.cmd_submit.number_of_packets <0 || - pdu->u.cmd_submit.number_of_packets > packets) { + pdu->u.cmd_submit.number_of_packets > +USBIP_MAX_ISO_PACKETS ) {dev_err (&sdev->udev->dev,"CMD_SUBMIT: isoc invalid num packets %d\n" , pdu->u.cmd_submit.number_of_packets);
drivers/usb/usbip/usbip_common.h +7 -0
@@ -135,6 +135,13 @@ extern struct device_attribute dev_attr_#define USBIP_DIR_OUT 0x00#define USBIP_DIR_IN 0x01 +/* +* Arbitrary limit for the maximum number of isochronous packets in an URB, +* compare for example the uhci_submit_isochronous function in +* drivers/usb/host/uhci-q.c +*/ +#define USBIP_MAX_ISO_PACKETS 1024 +/** * struct usbip_header_basic - data pertinent to every request * @command: the usbip request type
Greg Kroah-Hartman
maintainerPATCH 22/75 USB: core: Fix unterminated string returned by usb_string()
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
commit c01c348ecdc66085e44912c97368809612231520 upstream.
Some drivers (such as the vub300 MMC driver) expect usb_string() to return a properly NUL-terminated string, even when an error occurs. (In fact, vub300's probe routine doesn't bother to check the return code from usb_string().) When the driver goes on to use an unterminated string, it leads to kernel errors such as stack-out-of-bounds, as found by the syzkaller USB fuzzer.
An out-of-range string index argument is not at all unlikely, given that some devices don't provide string descriptors and therefore list 0 as the value for their string indexes. This patch makes usb_string() return a properly terminated empty string along with the -EINVAL error code when an out-of-range index is encountered.
And since a USB string index is a single-byte value, indexes >= 256 are just as invalid as values of 0 or below.
--- drivers/usb/core/message.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/core/message.c +3 -1
@@ -818,9 +818,11 @@ int usb_string(struct usb_device *dev, iif (dev->state ==USB_STATE_SUSPENDED )return -EHOSTUNREACH ; -if (size <=0 || !buf || !index) +if (size <=0 || !buf)return -EINVAL ; buf[0 ] =0 ; +if (index <=0 || index >=256 ) +return -EINVAL ; tbuf =kmalloc (256 ,GFP_NOIO );if (!tbuf)return -ENOMEM ;
Greg Kroah-Hartman
maintainerPATCH 23/75 USB: core: Fix bug caused by duplicate interface PM usage counter
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
commit c2b71462d294cf517a0bc6e4fd6424d7cee5596f upstream.
The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active:
URB 0000000031fb463e submitted while active WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363
The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface.
Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound.
This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation!
As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative.
It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this.
--- Documentation/driver-api/usb/power-management.rst | 14 +++++++++----- drivers/usb/core/driver.c | 13 ------------- drivers/usb/storage/realtek_cr.c | 13 +++++-------- include/linux/usb.h | 2 -- 4 files changed, 14 insertions(+), 28 deletions(-)
Documentation/driver-api/usb/power-management.rst +9 -5
@@ -370,11 +370,15 @@ autosuspend the interface's device. Whe then the interface is considered to be idle, and the kernel may autosuspend the device. -Drivers need not be concerned about balancing changes to the usage -counter; the USB core will undo any remaining "get"s when a driver -is unbound from its interface. As a corollary, drivers must not call -any of the ``usb_autopm_*`` functions after their ``disconnect`` -routine has returned. +Drivers must be careful to balance their overall changes to the usage +counter. Unbalanced "get"s will remain in effect when a driver is +unbound from its interface, preventing the device from going into +runtime suspend should the interface be bound to a driver again. On +the other hand, drivers are allowed to achieve this balance by calling +the ``usb_autopm_*`` functions even after their ``disconnect`` routine +has returned -- say from within a work-queue routine -- provided they +retain an active reference to the interface (via ``usb_get_intf`` and +``usb_put_intf``). Drivers using the async routines are responsible for their own synchronization and mutual exclusion.
drivers/usb/core/driver.c +0 -13
@@ -473,11 +473,6 @@ static int usb_unbind_interface(struct dpm_runtime_disable (dev);pm_runtime_set_suspended (dev); -/* Undo any residual pm_autopm_get_interface_* calls */ -for (r =atomic_read (&intf->pm_usage_cnt); r >0 ; --r) -usb_autopm_put_interface_no_suspend (intf); -atomic_set (&intf->pm_usage_cnt,0 ); -if (!error)usb_autosuspend_device (udev);
@@ -1628,7 +1623,6 @@ void usb_autopm_put_interface(struct usbint status;usb_mark_last_busy (udev); -atomic_dec (&intf->pm_usage_cnt); status =pm_runtime_put_sync (&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count),
@@ -1657,7 +1651,6 @@ void usb_autopm_put_interface_async(struint status;usb_mark_last_busy (udev); -atomic_dec (&intf->pm_usage_cnt); status =pm_runtime_put (&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count),
@@ -1679,7 +1672,6 @@ void usb_autopm_put_interface_no_suspendstruct usb_device *udev =interface_to_usbdev (intf);usb_mark_last_busy (udev); -atomic_dec (&intf->pm_usage_cnt);pm_runtime_put_noidle (&intf->dev); }EXPORT_SYMBOL_GPL (usb_autopm_put_interface_no_suspend);
@@ -1710,8 +1702,6 @@ int usb_autopm_get_interface(struct usb_ status =pm_runtime_get_sync (&intf->dev);if (status <0 )pm_runtime_put_sync (&intf->dev); -else -atomic_inc (&intf->pm_usage_cnt);dev_vdbg (&intf->dev,"%s: cnt %d -> %d\n" , __func__,atomic_read (&intf->dev.power.usage_count), status);
@@ -1745,8 +1735,6 @@ int usb_autopm_get_interface_async(struc status =pm_runtime_get (&intf->dev);if (status <0 && status != -EINPROGRESS )pm_runtime_put_noidle (&intf->dev); -else -atomic_inc (&intf->pm_usage_cnt);dev_vdbg (&intf->dev,"%s: cnt %d -> %d\n" , __func__,atomic_read (&intf->dev.power.usage_count), status);
@@ -1770,7 +1758,6 @@ void usb_autopm_get_interface_no_resume(struct usb_device *udev =interface_to_usbdev (intf);usb_mark_last_busy (udev); -atomic_inc (&intf->pm_usage_cnt);pm_runtime_get_noresume (&intf->dev); }EXPORT_SYMBOL_GPL (usb_autopm_get_interface_no_resume);
drivers/usb/storage/realtek_cr.c +5 -8
@@ -775,18 +775,16 @@ static void rts51x_suspend_timer_fn(unsibreak ;case RTS51X_STAT_IDLE :case RTS51X_STAT_SS : -usb_stor_dbg (us,"RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n" , -atomic_read (&us->pusb_intf->pm_usage_cnt), +usb_stor_dbg (us,"RTS51X_STAT_SS, power.usage:%d\n" ,atomic_read (&us->pusb_intf->dev.power.usage_count)); -if (atomic_read (&us->pusb_intf->pm_usage_cnt) >0 ) { +if (atomic_read (&us->pusb_intf->dev.power.usage_count) >0 ) {usb_stor_dbg (us,"Ready to enter SS state\n" );rts51x_set_stat (chip,RTS51X_STAT_SS );/* ignore mass storage interface's children */ pm_suspend_ignore_children (&us->pusb_intf->dev, true);usb_autopm_put_interface_async (us->pusb_intf); -usb_stor_dbg (us,"RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n" , -atomic_read (&us->pusb_intf->pm_usage_cnt), +usb_stor_dbg (us,"RTS51X_STAT_SS 01, power.usage:%d\n" ,atomic_read (&us->pusb_intf->dev.power.usage_count)); }break ;
@@ -819,11 +817,10 @@ static void rts51x_invoke_transport(struint ret;if (working_scsi (srb)) { -usb_stor_dbg (us,"working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n" , -atomic_read (&us->pusb_intf->pm_usage_cnt), +usb_stor_dbg (us,"working scsi, power.usage:%d\n" ,atomic_read (&us->pusb_intf->dev.power.usage_count)); -if (atomic_read (&us->pusb_intf->pm_usage_cnt) <=0 ) { +if (atomic_read (&us->pusb_intf->dev.power.usage_count) <=0 ) { ret =usb_autopm_get_interface (us->pusb_intf);usb_stor_dbg (us,"working scsi, ret=%d\n" , ret); }
include/linux/usb.h +0 -2
@@ -200,7 +200,6 @@ usb_find_last_int_out_endpoint(struct us* @dev: driver model's view of this device * @usb_dev: if an interface is bound to the USB major, this will point * to the sysfs representation for that device. -* @pm_usage_cnt: PM usage counter for this interface * @reset_ws: Used for scheduling resets from atomic context. * @resetting_device: USB core reset the device, so use alt setting 0 as * current; needs bandwidth alloc after reset.
@@ -257,7 +256,6 @@ struct usb_interface {struct device dev;/* interface specific device info */ struct device *usb_dev; -atomic_t pm_usage_cnt;/* usage counter for autosuspend */ struct work_struct reset_ws;/* for resets in atomic context */ };#define to_usb_interface (d) container_of(d, struct usb_interface, dev)
Greg Kroah-Hartman
maintainerPATCH 24/75 mm: do not stall register_shrinker()
In reply to Greg Kroah-HartmanFrom: Minchan Kim <[email protected]>
commit e496612c5130567fc9d5f1969ca4b86665aa3cbb upstream.
Shakeel Butt reported he has observed in production systems that the job loader gets stuck for 10s of seconds while doing a mount operation. It turns out that it was stuck in register_shrinker() because some unrelated job was under memory pressure and was spending time in shrink_slab(). Machines have a lot of shrinkers registered and jobs under memory pressure have to traverse all of those memcg-aware shrinkers and affect unrelated jobs which want to register their own shrinkers.
To solve the issue, this patch simply bails out slab shrinking if it is found that someone wants to register a shrinker in parallel. A downside is it could cause unfair shrinking between shrinkers. However, it should be rare and we can add compilcated logic if we find it's not enough.
--- mm/vmscan.c | 9 +++++++++ 1 file changed, 9 insertions(+)
mm/vmscan.c +9 -0
@@ -502,6 +502,15 @@ static unsigned long shrink_slab(gfp_t g sc.nid =0 ; freed +=do_shrink_slab (&sc, shrinker, nr_scanned, nr_eligible); +/* +* Bail out if someone want to register a new shrinker to +* prevent the regsitration from being stalled for long periods +* by parallel ongoing shrinking. +*/ +if (rwsem_is_contended (&shrinker_rwsem)) { + freed = freed ? :1 ; +break ; + } }up_read (&shrinker_rwsem);
Greg Kroah-Hartman
maintainerPATCH 25/75 nvme-loop: init nvmet_ctrl fatal_err_work when allocate
In reply to Greg Kroah-Hartman[ Upstream commit d11de63f2b519f0a162b834013b6d3a46dbf3886 ]
After commit 4d43d395fe (workqueue: Try to catch flush_work() without INIT_WORK()), it can cause warning when delete nvme-loop device, trace like:
[ 76.601272] Call Trace: [ 76.601646] ? del_timer+0x72/0xa0 [ 76.602156] __cancel_work_timer+0x1ae/0x270 [ 76.602791] cancel_work_sync+0x14/0x20 [ 76.603407] nvmet_ctrl_free+0x1b7/0x2f0 [nvmet] [ 76.604091] ? free_percpu+0x168/0x300 [ 76.604652] nvmet_sq_destroy+0x106/0x240 [nvmet] [ 76.605346] nvme_loop_destroy_admin_queue+0x30/0x60 [nvme_loop] [ 76.606220] nvme_loop_shutdown_ctrl+0xc3/0xf0 [nvme_loop] [ 76.607026] nvme_loop_delete_ctrl_host+0x19/0x30 [nvme_loop] [ 76.607871] nvme_do_delete_ctrl+0x75/0xb0 [ 76.608477] nvme_sysfs_delete+0x7d/0xc0 [ 76.609057] dev_attr_store+0x24/0x40 [ 76.609603] sysfs_kf_write+0x4c/0x60 [ 76.610144] kernfs_fop_write+0x19a/0x260 [ 76.610742] __vfs_write+0x1c/0x60 [ 76.611246] vfs_write+0xfa/0x280 [ 76.611739] ksys_write+0x6e/0x120 [ 76.612238] __x64_sys_write+0x1e/0x30 [ 76.612787] do_syscall_64+0xbf/0x3a0 [ 76.613329] entry_SYSCALL_64_after_hwframe+0x44/0xa9
We fix it by moving fatal_err_work init to nvmet_alloc_ctrl(), which may more reasonable.
--- drivers/nvme/target/core.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/nvme/target/core.c +10 -10
@@ -746,6 +746,15 @@ bool nvmet_host_allowed(struct nvmet_req *req, struct nvmet_subsys *subsys,return __nvmet_host_allowed (subsys, hostnqn); } +static void nvmet_fatal_error_handler (struct work_struct *work) +{ +struct nvmet_ctrl *ctrl = + container_of(work, struct nvmet_ctrl, fatal_err_work); + +pr_err ("ctrl %d fatal error occurred!\n" , ctrl->cntlid); + ctrl->ops->delete_ctrl (ctrl); +} +u16 nvmet_alloc_ctrl (const char *subsysnqn,const char *hostnqn,struct nvmet_req *req,u32 kato,struct nvmet_ctrl **ctrlp) {
@@ -785,6 +794,7 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,INIT_WORK (&ctrl->async_event_work, nvmet_async_event_work);INIT_LIST_HEAD (&ctrl->async_events); +INIT_WORK (&ctrl->fatal_err_work, nvmet_fatal_error_handler);memcpy (ctrl->subsysnqn, subsysnqn,NVMF_NQN_SIZE );memcpy (ctrl->hostnqn, hostnqn,NVMF_NQN_SIZE );
@@ -887,21 +897,11 @@ void nvmet_ctrl_put(struct nvmet_ctrl *ctrl)kref_put (&ctrl->ref, nvmet_ctrl_free); } -static void nvmet_fatal_error_handler (struct work_struct *work) -{ -struct nvmet_ctrl *ctrl = - container_of(work, struct nvmet_ctrl, fatal_err_work); - -pr_err ("ctrl %d fatal error occurred!\n" , ctrl->cntlid); - ctrl->ops->delete_ctrl (ctrl); -} -void nvmet_ctrl_fatal_error (struct nvmet_ctrl *ctrl) {mutex_lock (&ctrl->lock);if (!(ctrl->csts &NVME_CSTS_CFS )) { ctrl->csts |=NVME_CSTS_CFS ; -INIT_WORK (&ctrl->fatal_err_work, nvmet_fatal_error_handler);schedule_work (&ctrl->fatal_err_work); }mutex_unlock (&ctrl->lock);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 26/75 HID: logitech: check the return value of create_singlethread_workqueue
In reply to Greg Kroah-Hartman[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]
create_singlethread_workqueue may fail and return NULL. The fix checks if it is NULL to avoid NULL pointer dereference. Also, the fix moves the call of create_singlethread_workqueue earlier to avoid resource-release issues.
--- drivers/hid/hid-logitech-hidpp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/hid/hid-logitech-hidpp.c +7 -1
@@ -1907,6 +1907,13 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)kfree (data);return -ENOMEM ; } + data->wq =create_singlethread_workqueue ("hidpp-ff-sendqueue" ); +if (!data->wq) { +kfree (data->effect_ids); +kfree (data); +return -ENOMEM ; + } + data->hidpp = hidpp; data->feature_index = feature_index; data->version = version;
@@ -1951,7 +1958,6 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)/* ignore boost value at response.fap.params[2] */ /* init the hardware command queue */ - data->wq =create_singlethread_workqueue ("hidpp-ff-sendqueue" );atomic_set (&data->workqueue_size,0 );/* initialize with zero autocenter to get wheel in usable state */
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 27/75 HID: debug: fix race condition with between rdesc_show() and device removal
In reply to Greg Kroah-Hartman[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]
There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference:
BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc.
--- drivers/hid/hid-debug.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/hid/hid-debug.c +5 -0
@@ -1060,10 +1060,15 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p)seq_printf (f,"\n\n" );/* dump parsed data and input mappings */ +if (down_interruptible (&hdev->driver_input_lock)) +return 0 ; +hid_dump_device (hdev, f);seq_printf (f,"\n" );hid_dump_input_mapping (hdev, f); +up (&hdev->driver_input_lock); +return 0 ; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 28/75 rtc: sh: Fix invalid alarm warning for non-enabled alarm
In reply to Greg Kroah-Hartman[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]
When no alarm has been programmed on RSK-RZA1, an error message is printed during boot:
rtc rtc0: invalid alarm value: 2019-03-14T255:255:255
sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields.
Fix this by returning -1 instead, as this value is handled fine for all fields.
--- drivers/rtc/rtc-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-sh.c +1 -1
@@ -462,7 +462,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)static inline int sh_rtc_read_alarm_value (struct sh_rtc *rtc,int reg_off) {unsigned int byte; -int value =0xff ;/* return 0xff for ignored values */ +int value =-1 ;/* return -1 for ignored values */ byte =readb (rtc->regbase + reg_off);if (byte &AR_ENB ) {
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 29/75 batman-adv: Reduce claim hash refcnt only for removed entry
In reply to Greg Kroah-Hartman[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle.
The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced.
Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as:
refcount_t: underflow; use-after-free.
--- net/batman-adv/bridge_loop_avoidance.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
net/batman-adv/bridge_loop_avoidance.c +13 -3
@@ -803,6 +803,8 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv, const u8 *mac, const unsigned short vid) {struct batadv_bla_claim search_claim, *claim; +struct batadv_bla_claim *claim_removed_entry; +struct hlist_node *claim_removed_node;ether_addr_copy (search_claim.addr, mac); search_claim.vid = vid;
@@ -813,10 +815,18 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,batadv_dbg (BATADV_DBG_BLA , bat_priv,"%s(): %pM, vid %d\n" , __func__, mac,batadv_print_vid (vid)); -batadv_hash_remove (bat_priv->bla.claim_hash, batadv_compare_claim, - batadv_choose_claim, claim); -batadv_claim_put (claim);/* reference from the hash is gone */ + claim_removed_node =batadv_hash_remove (bat_priv->bla.claim_hash, + batadv_compare_claim, + batadv_choose_claim, claim); +if (!claim_removed_node) + goto free_claim; +/* reference from the hash is gone */ + claim_removed_entry =hlist_entry (claim_removed_node, + struct batadv_bla_claim, hash_entry); +batadv_claim_put (claim_removed_entry); + +free_claim:/* don't need the reference from hash_find() anymore */ batadv_claim_put (claim); }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 30/75 batman-adv: Reduce tt_local hash refcnt only for removed entry
In reply to Greg Kroah-Hartman[ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ]
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle.
The batadv_tt_local_remove is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced.
Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as:
refcount_t: underflow; use-after-free.
--- net/batman-adv/translation-table.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
net/batman-adv/translation-table.c +9 -5
@@ -1313,9 +1313,10 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr, unsigned short vid, const char *message, bool roaming) { + struct batadv_tt_local_entry *tt_removed_entry;struct batadv_tt_local_entry *tt_local_entry;u16 flags, curr_flags =BATADV_NO_FLAGS ; -void *tt_entry_exists; +struct hlist_node *tt_removed_node; tt_local_entry =batadv_tt_local_hash_find (bat_priv, addr, vid);if (!tt_local_entry)
@@ -1344,15 +1345,18 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,*/ batadv_tt_local_event (bat_priv, tt_local_entry,BATADV_TT_CLIENT_DEL ); - tt_entry_exists =batadv_hash_remove (bat_priv->tt.local_hash, + tt_removed_node =batadv_hash_remove (bat_priv->tt.local_hash, batadv_compare_tt, batadv_choose_tt, &tt_local_entry->common); -if (!tt_entry_exists) +if (!tt_removed_node) goto out; -/* extra call to free the local tt entry */ -batadv_tt_local_entry_put (tt_local_entry); +/* drop reference of remove hash entry */ + tt_removed_entry =hlist_entry (tt_removed_node, + struct batadv_tt_local_entry, + common.hash_entry); +batadv_tt_local_entry_put (tt_removed_entry); out:if (tt_local_entry)
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 31/75 batman-adv: Reduce tt_global hash refcnt only for removed entry
In reply to Greg Kroah-Hartman[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle.
The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced.
Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as:
refcount_t: underflow; use-after-free.
--- net/batman-adv/translation-table.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
net/batman-adv/translation-table.c +15 -3
@@ -614,14 +614,26 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv,struct batadv_tt_global_entry *tt_global, const char *message) { + struct batadv_tt_global_entry *tt_removed_entry; +struct hlist_node *tt_removed_node; +batadv_dbg (BATADV_DBG_TT , bat_priv,"Deleting global tt entry %pM (vid: %d): %s\n" , tt_global->common.addr,batadv_print_vid (tt_global->common.vid), message); -batadv_hash_remove (bat_priv->tt.global_hash, batadv_compare_tt, - batadv_choose_tt, &tt_global->common); -batadv_tt_global_entry_put (tt_global); + tt_removed_node =batadv_hash_remove (bat_priv->tt.global_hash, + batadv_compare_tt, + batadv_choose_tt, + &tt_global->common); +if (!tt_removed_node) +return ; + +/* drop reference of remove hash entry */ + tt_removed_entry =hlist_entry (tt_removed_node, + struct batadv_tt_global_entry, + common.hash_entry); +batadv_tt_global_entry_put (tt_removed_entry); }/**
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 32/75 ARM: dts: rockchip: Fix gpu opp node names for rk3288
In reply to Greg Kroah-Hartman[ Upstream commit d040e4e8deeaa8257d6aa260e29ad69832b5d630 ]
The device tree compiler yells like this:
Warning (unit_address_vs_reg):
/gpu-opp-table/opp@100000000:
node has a unit name, but no reg property
Let's match the cpu opp node names and use a dash.
--- arch/arm/boot/dts/rk3288.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/rk3288.dtsi +6 -6
@@ -1181,27 +1181,27 @@ gpu_opp_table: gpu-opp-table { compatible = "operating-points-v2"; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <950000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; };
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 33/75 igb: Fix WARN_ONCE on runtime suspend
In reply to Greg Kroah-Hartman[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]
The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.
Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well.
Also move a couple of defines into the appropriate header file instead of inline in the .c file.
--- .../net/ethernet/intel/igb/e1000_defines.h | 2 + drivers/net/ethernet/intel/igb/igb_main.c | 57 +++---------------- 2 files changed, 10 insertions(+), 49 deletions(-)
drivers/net/ethernet/intel/igb/e1000_defines.h +2 -0
@@ -214,6 +214,8 @@/* enable link status from external LINK_0 and LINK_1 pins */ #define E1000_CTRL_SWDPIN0 0x00040000/* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000/* SWDPIN 1 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000/* D3 WUC */ +#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000/* PHY PM enable */ #define E1000_CTRL_SDP0_DIR 0x00400000/* SDP0 Data direction */ #define E1000_CTRL_SDP1_DIR 0x00800000/* SDP1 Data direction */ #define E1000_CTRL_RST 0x04000000/* Global reset */
drivers/net/ethernet/intel/igb/igb_main.c +8 -49
97 lines not on this page · raw message
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 34/75 net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands
In reply to Greg Kroah-Hartman[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]
Traditionally, the PF (Physical Function) which resides on vport 0 was the E-switch manager. Since the ECPF (Embedded CPU Physical Function), which resides on vport 0xfffe, was introduced as the E-Switch manager, the assumption that the E-switch manager is on vport 0 is incorrect.
Since the eswitch code already uses the actual vport value, all we need is to always set other_vport=1.
--- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +2 -4
@@ -79,8 +79,7 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport, opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);MLX5_SET (modify_nic_vport_context_in, in, field_select.change_event,1 );MLX5_SET (modify_nic_vport_context_in, in, vport_number, vport); -if (vport) -MLX5_SET (modify_nic_vport_context_in, in, other_vport,1 ); +MLX5_SET (modify_nic_vport_context_in, in, other_vport,1 ); nic_vport_ctx =MLX5_ADDR_OF (modify_nic_vport_context_in, in, nic_vport_context);
@@ -108,8 +107,7 @@ static int modify_esw_vport_context_cmd(struct mlx5_core_dev *dev, u16 vport,MLX5_SET (modify_esw_vport_context_in, in, opcode,MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT );MLX5_SET (modify_esw_vport_context_in, in, vport_number, vport); -if (vport) -MLX5_SET (modify_esw_vport_context_in, in, other_vport,1 ); +MLX5_SET (modify_esw_vport_context_in, in, other_vport,1 );return mlx5_cmd_exec (dev, in, inlen, out,sizeof (out)); }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 35/75 bonding: show full hw address in sysfs for slave entries
In reply to Greg Kroah-Hartman[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]
Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example.
# cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1
# cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80
So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.
--- drivers/net/bonding/bond_sysfs_slave.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_sysfs_slave.c +3 -1
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);static ssize_t perm_hwaddr_show (struct slave *slave,char *buf) { -return sprintf (buf,"%pM\n" , slave->perm_hwaddr); +return sprintf (buf,"%*phC\n" , + slave->dev->addr_len, + slave->perm_hwaddr); }static SLAVE_ATTR_RO (perm_hwaddr);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 36/75 net: stmmac: ratelimit RX error logs
In reply to Greg Kroah-Hartman[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ]
Ratelimit RX error logs.
--- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +8 -6
@@ -3413,9 +3413,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)* ignored */ if (frame_len > priv->dma_buf_sz) { -netdev_err (priv->dev, -"len %d larger than size (%d)\n" , - frame_len, priv->dma_buf_sz); +if (net_ratelimit ()) +netdev_err (priv->dev, +"len %d larger than size (%d)\n" , + frame_len, priv->dma_buf_sz); priv->dev->stats.rx_length_errors++;break ; }
@@ -3473,9 +3474,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) }else { skb = rx_q->rx_skbuff[entry];if (unlikely (!skb)) { -netdev_err (priv->dev, -"%s: Inconsistent Rx chain\n" , - priv->dev->name); +if (net_ratelimit ()) +netdev_err (priv->dev, +"%s: Inconsistent Rx chain\n" , + priv->dev->name); priv->dev->stats.rx_dropped++;break ; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 37/75 net: stmmac: dont overwrite discard_frame status
In reply to Greg Kroah-Hartman[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ]
If we have error bits set, the discard_frame status will get overwritten by checksum bit checks, which might set the status back to good one. Fix by checking the COE status only if the frame is good.
--- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/net/ethernet/stmicro/stmmac/enh_desc.c +4 -3
@@ -231,9 +231,10 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,* It doesn't match with the information reported into the databook. * At any rate, we need to understand if the CSUM hw computation is ok * and report this info to the upper layers. */ - ret =enh_desc_coe_rdes0 (!!(rdes0 &RDES0_IPC_CSUM_ERROR ), - !!(rdes0 &RDES0_FRAME_TYPE ), - !!(rdes0 &ERDES0_RX_MAC_ADDR )); +if (likely (ret == good_frame)) + ret =enh_desc_coe_rdes0 (!!(rdes0 &RDES0_IPC_CSUM_ERROR ), + !!(rdes0 &RDES0_FRAME_TYPE ), + !!(rdes0 &ERDES0_RX_MAC_ADDR ));if (unlikely (rdes0 &RDES0_DRIBBLING )) x->dribbling_bit++;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 38/75 net: stmmac: fix dropping of multi-descriptor RX frames
In reply to Greg Kroah-Hartman[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]
Packets without the last descriptor set should be dropped early. If we receive a frame larger than the DMA buffer, the HW will continue using the next descriptor. Driver mistakes these as individual frames, and sometimes a truncated frame (without the LD set) may look like a valid packet.
This fixes a strange issue where the system replies to 4098-byte ping although the MTU/DMA buffer size is set to 4096, and yet at the same time it's logging an oversized packet.
--- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/ethernet/stmicro/stmmac/enh_desc.c +5 -0
@@ -201,6 +201,11 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,if (unlikely (rdes0 &RDES0_OWN ))return dma_own; +if (unlikely (!(rdes0 &RDES0_LAST_DESCRIPTOR ))) { + stats->rx_length_errors++; +return discard_frame; + } +if (unlikely (rdes0 &RDES0_ERROR_SUMMARY )) {if (unlikely (rdes0 &RDES0_DESCRIPTOR_ERROR )) { x->rx_desc++;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 39/75 net: stmmac: dont log oversized frames
In reply to Greg Kroah-Hartman[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ]
This is log is harmful as it can trigger multiple times per packet. Delete it.
--- drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 -- 1 file changed, 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/norm_desc.c +0 -2
@@ -91,8 +91,6 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,return dma_own;if (unlikely (!(rdes0 &RDES0_LAST_DESCRIPTOR ))) { -pr_warn ("%s: Oversized frame spanned multiple buffers\n" , - __func__); stats->rx_length_errors++;return discard_frame; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 40/75 jffs2: fix use-after-free on symlink traversal
In reply to Greg Kroah-Hartman[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory.
--- fs/jffs2/readinode.c | 5 ----- fs/jffs2/super.c | 5 ++++- 2 files changed, 4 insertions(+), 6 deletions(-)
fs/jffs2/readinode.c +0 -5
@@ -1414,11 +1414,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)jffs2_kill_fragtree (&f->fragtree, deleted?c:NULL ); -if (f->target) { -kfree (f->target); - f->target =NULL ; - } - fds = f->dents;while (fds) { fd = fds;
fs/jffs2/super.c +4 -1
@@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)static void jffs2_i_callback (struct rcu_head *head) { struct inode *inode = container_of(head, struct inode, i_rcu); -kmem_cache_free (jffs2_inode_cachep,JFFS2_INODE_INFO (inode)); +struct jffs2_inode_info *f =JFFS2_INODE_INFO (inode); + +kfree (f->target); +kmem_cache_free (jffs2_inode_cachep, f); }static void jffs2_destroy_inode (struct inode *inode)
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 41/75 debugfs: fix use-after-free on symlink traversal
In reply to Greg Kroah-Hartman[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ]
symlink body shouldn't be freed without an RCU delay. Switch debugfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Similar to solution for bpf, only here it's even more obvious that ->evict_inode() can be dropped.
--- fs/debugfs/inode.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
fs/debugfs/inode.c +9 -4
@@ -170,19 +170,24 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)return 0 ; } -static void debugfs_evict_inode (struct inode *inode) +static void debugfs_i_callback (struct rcu_head *head) { -truncate_inode_pages_final (&inode->i_data); -clear_inode (inode); + struct inode *inode = container_of(head, struct inode, i_rcu);if (S_ISLNK (inode->i_mode))kfree (inode->i_link); +free_inode_nonrcu (inode); +} + +static void debugfs_destroy_inode (struct inode *inode) +{ +call_rcu (&inode->i_rcu, debugfs_i_callback); }static const struct super_operations debugfs_super_operations = { .statfs = simple_statfs, .remount_fs = debugfs_remount, .show_options = debugfs_show_options, - .evict_inode = debugfs_evict_inode, + .destroy_inode = debugfs_destroy_inode, };static struct vfsmount *debugfs_automount (struct path *path)
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 42/75 rtc: da9063: set uie_unsupported when relevant
In reply to Greg Kroah-Hartman[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]
The DA9063AD doesn't support alarms on any seconds and its granularity is the minute. Set uie_unsupported in that case.
--- drivers/rtc/rtc-da9063.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/rtc/rtc-da9063.c +7 -0
@@ -480,6 +480,13 @@ static int da9063_rtc_probe(struct platform_device *pdev)da9063_data_to_tm (data, &rtc->alarm_time, rtc); rtc->rtc_sync = false; +/* +* TODO: some models have alarms on a minute boundary but still support +* real hardware interrupts. Add this once the core supports it. +*/ +if (config->rtc_data_start !=RTC_SEC ) + rtc->rtc_dev->uie_unsupported =1 ; + irq_alarm =platform_get_irq_byname (pdev,"ALARM" ); ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL, da9063_alarm_event,
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 43/75 HID: input: add mapping for Assistant key
In reply to Greg Kroah-Hartman[ Upstream commit ce856634af8cda3490947df8ac1ef5843e6356af ]
According to HUTRR89 usage 0x1cb from the consumer page was assigned to allow launching desktop-aware assistant application, so let's add the mapping.
--- drivers/hid/hid-input.c | 1 + 1 file changed, 1 insertion(+)
drivers/hid/hid-input.c +1 -0
@@ -973,6 +973,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fielcase 0x1b8 :map_key_clear (KEY_VIDEO );break ;case 0x1bc :map_key_clear (KEY_MESSENGER );break ;case 0x1bd :map_key_clear (KEY_INFO );break ; +case 0x1cb :map_key_clear (KEY_ASSISTANT );break ;case 0x201 :map_key_clear (KEY_NEW );break ;case 0x202 :map_key_clear (KEY_OPEN );break ;case 0x203 :map_key_clear (KEY_CLOSE );break ;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 44/75 vfio/pci: use correct format characters
In reply to Greg Kroah-Hartman[ Upstream commit 426b046b748d1f47e096e05bdcc6fb4172791307 ]
When compiling with -Wformat, clang emits the following warnings:
drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice, ^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice, ^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints.
--- drivers/vfio/pci/vfio_pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/vfio/pci/vfio_pci.c +2 -2
@@ -1443,11 +1443,11 @@ static void __init vfio_pci_fill_ids(void) rc =pci_add_dynid (&vfio_pci_driver, vendor, device, subvendor, subdevice, class, class_mask,0 );if (rc) -pr_warn ("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n" , +pr_warn ("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n" , vendor, device, subvendor, subdevice, class, class_mask, rc);else -pr_info ("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n" , +pr_info ("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n" , vendor, device, subvendor, subdevice, class, class_mask); }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 45/75 scsi: core: add new RDAC LENOVO/DE_Series device
In reply to Greg Kroah-Hartman[ Upstream commit 1cb1d2c64e812928fe0a40b8f7e74523d0283dbe ]
Blacklist "Universal Xport" LUN. It's used for in-band storage array management. Also add model to the rdac dh family.
--- drivers/scsi/scsi_devinfo.c | 1 + drivers/scsi/scsi_dh.c | 1 + 2 files changed, 2 insertions(+)
drivers/scsi/scsi_devinfo.c +1 -0
@@ -248,6 +248,7 @@ static struct { {"NETAPP", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36}, {"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN}, {"SONY", "TSL", NULL, BLIST_FORCELUN}, /* DDS3 & DDS4 autoloaders */
drivers/scsi/scsi_dh.c +1 -0
@@ -75,6 +75,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = { {"NETAPP", "INF-01-00", "rdac", }, {"LSI", "INF-01-00", "rdac", }, {"ENGENIO", "INF-01-00", "rdac", }, + {"LENOVO", "DE_Series", "rdac", }, {NULL, NULL, NULL }, };
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 46/75 scsi: storvsc: Fix calculation of sub-channel count
In reply to Greg Kroah-Hartman[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]
When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many.
This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs).
--- drivers/scsi/storvsc_drv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/scsi/storvsc_drv.c +11 -2
@@ -658,13 +658,22 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)static void handle_multichannel_storage (struct hv_device *device,int max_chns) {struct storvsc_device *stor_device; -int num_cpus =num_online_cpus ();int num_sc;struct storvsc_cmd_request *request;struct vstor_packet *vstor_packet;int ret, t; - num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns); +/* +* If the number of CPUs is artificially restricted, such as +* with maxcpus=1 on the kernel boot line, Hyper-V could offer +* sub-channels >= the number of CPUs. These sub-channels +* should not be created. The primary channel is already created +* and assigned to one CPU, so check against # CPUs - 1. +*/ + num_sc =min ((int )(num_online_cpus () -1 ), max_chns); +if (!num_sc) +return ; + stor_device =get_out_stor_device (device);if (!stor_device)return ;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 47/75 net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
In reply to Greg Kroah-Hartman[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be interrupted by interruptions, and than call hns_nic_tx_poll_one() to handle the new packets, and free the skb. So, when turn back to hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to fix the bug.
--- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/ethernet/hisilicon/hns/hns_enet.c +3 -2
@@ -376,8 +376,6 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,wmb ();/* commit all data before submit */ assert (skb->queue_mapping < priv->ae_handle->q_num);hnae_queue_xmit (priv->ae_handle->qs[skb->queue_mapping], buf_num); - ring->stats.tx_pkts++; - ring->stats.tx_bytes += skb->len;return NETDEV_TX_OK ;
@@ -1099,6 +1097,9 @@ static int hns_nic_tx_poll_one(struct hns_nic_ring_data *ring_data,/* issue prefetch for next Tx descriptor */ prefetch (&ring->desc_cb[ring->next_to_clean]); } +/* update tx ring statistics. */ + ring->stats.tx_pkts += pkts; + ring->stats.tx_bytes += bytes;NETIF_TX_UNLOCK (ring);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 48/75 net: hns: Use NAPI_POLL_WEIGHT for hns driver
In reply to Greg Kroah-Hartman[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
--- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/net/ethernet/hisilicon/hns/hns_enet.c +2 -5
@@ -29,9 +29,6 @@#define SERVICE_TIMER_HZ (1 * HZ) -#define NIC_TX_CLEAN_MAX_NUM 256 -#define NIC_RX_CLEAN_MAX_NUM 64 -#define RCB_IRQ_NOT_INITED 0#define RCB_IRQ_INITED 1#define HNS_BUFFER_SIZE_2048 2048
@@ -2270,7 +2267,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv) hns_nic_tx_fini_pro_v2;netif_napi_add (priv->netdev, &rd->napi, - hns_nic_common_poll,NIC_TX_CLEAN_MAX_NUM ); + hns_nic_common_poll,NAPI_POLL_WEIGHT ); rd->ring->irq_init_flag =RCB_IRQ_NOT_INITED ; }for (i = h->q_num; i < h->q_num *2 ; i++) {
@@ -2283,7 +2280,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv) hns_nic_rx_fini_pro_v2;netif_napi_add (priv->netdev, &rd->napi, - hns_nic_common_poll,NIC_RX_CLEAN_MAX_NUM ); + hns_nic_common_poll,NAPI_POLL_WEIGHT ); rd->ring->irq_init_flag =RCB_IRQ_NOT_INITED ; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 49/75 net: hns: Fix probabilistic memory overwrite when HNS driver initialized
In reply to Greg Kroah-Hartman[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ]
When reboot the system again and again, may cause a memory overwrite.
[ 15.638922] systemd[1]: Reached target Swap. [ 15.667561] tun: Universal TUN/TAP device driver, 1.6 [ 15.676756] Bridge firewalling registered [ 17.344135] Unable to handle kernel paging request at virtual address 0000000200000040 [ 17.352179] Mem abort info: [ 17.355007] ESR = 0x96000004 [ 17.358105] Exception class = DABT (current EL), IL = 32 bits [ 17.364112] SET = 0, FnV = 0 [ 17.367209] EA = 0, S1PTW = 0 [ 17.370393] Data abort info: [ 17.373315] ISV = 0, ISS = 0x00000004 [ 17.377206] CM = 0, WnR = 0 [ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 17.386926] [0000000200000040] pgd=0000000000000000 [ 17.391878] Internal error: Oops: 96000004 [#1] SMP [ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1 [ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018 [ 17.425615] Workqueue: events_unbound async_run_entry_fn [ 17.435151] pstate: 00000005 (nzcv daif -PAN -UAO) [ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540 [ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540 [ 17.461701] sp : ffff000100d9bb60 [ 17.469146] x29: ffff000100d9bb60 x28: 0000000000000000 [ 17.478547] x27: 0000000000000000 x26: ffff802fb8945000 [ 17.488063] x25: 0000000000000000 x24: ffff802fa32081a8 [ 17.497381] x23: 0000000000000002 x22: ffff801fa2b15220 [ 17.506701] x21: ffff000009809000 x20: ffff802fa23a0888 [ 17.515980] x19: ffff801fa2b15220 x18: 0000000000000000 [ 17.525272] x17: 0000000200000000 x16: 0000000200000000 [ 17.534511] x15: 0000000000000000 x14: 0000000000000000 [ 17.543652] x13: ffff000008d95db8 x12: 000000000000000d [ 17.552780] x11: ffff000008d95d90 x10: 0000000000000b00 [ 17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560 [ 17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05 [ 17.579839] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000 [ 17.597734] x1 : 0000000200000000 x0 : 0000000200000000 [ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____)) [ 17.617438] Call trace: [ 17.623349] __mutex_lock.isra.1+0x74/0x540 [ 17.630927] __mutex_lock_slowpath+0x24/0x30 [ 17.638602] mutex_lock+0x50/0x60 [ 17.645295] drain_workqueue+0x34/0x198 [ 17.652623] __sas_drain_work+0x7c/0x168 [ 17.659903] sas_drain_work+0x60/0x68 [ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main] [ 17.676129] do_scsi_scan_host+0x70/0xb0 [ 17.683534] do_scan_async+0x20/0x228 [ 17.690586] async_run_entry_fn+0x4c/0x1d0 [ 17.697997] process_one_work+0x1b4/0x3f8 [ 17.705296] worker_thread+0x54/0x470
Every time the call trace is not the same, but the overwrite address is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040
The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG, didn't use the io_base offset.
--- drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c +1 -1
@@ -129,7 +129,7 @@ static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv)dsaf_set_bit (val,XGMAC_UNIDIR_EN_B ,0 );dsaf_set_bit (val,XGMAC_RF_TX_EN_B ,1 );dsaf_set_field (val,XGMAC_LF_RF_INSERT_M ,XGMAC_LF_RF_INSERT_S ,0 ); -dsaf_write_reg (mac_drv,XGMAC_MAC_TX_LF_RF_CONTROL_REG , val); +dsaf_write_dev (mac_drv,XGMAC_MAC_TX_LF_RF_CONTROL_REG , val); }/**
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 50/75 net: hns: fix ICMP6 neighbor solicitation messages discard problem
In reply to Greg Kroah-Hartman[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]
ICMP6 neighbor solicitation messages will be discard by the Hip06 chips, because of not setting forwarding pool. Enable promisc mode has the same problem.
This patch fix the wrong forwarding table configs for the multicast vague matching when enable promisc mode, and add forwarding pool for the forwarding table.
--- .../ethernet/hisilicon/hns/hns_dsaf_main.c | 33 +++++++++++++++---- 1 file changed, 27 insertions(+), 6 deletions(-)
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +27 -6
@@ -2743,6 +2743,17 @@ int hns_dsaf_get_regs_count(void)return DSAF_DUMP_REGS_NUM ; } +static int hns_dsaf_get_port_id (u8 port) +{ +if (port <DSAF_SERVICE_NW_NUM ) +return port; + +if (port >=DSAF_BASE_INNER_PORT_NUM ) +return port -DSAF_BASE_INNER_PORT_NUM +DSAF_SERVICE_NW_NUM ; + +return -EINVAL ; +} +static void set_promisc_tcam_enable (struct dsaf_device *dsaf_dev,u32 port) {struct dsaf_tbl_tcam_ucast_cfg tbl_tcam_ucast = {0 ,1 ,0 ,0 ,0x80 };
@@ -2808,23 +2819,33 @@ static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)memset (&temp_key,0x0 ,sizeof (temp_key)); mask_entry.addr[0 ] =0x01 ;hns_dsaf_set_mac_key (dsaf_dev, &mask_key, mask_entry.in_vlan_id, - port, mask_entry.addr); +0xf , mask_entry.addr); tbl_tcam_mcast.tbl_mcast_item_vld =1 ; tbl_tcam_mcast.tbl_mcast_old_en =0 ; -if (port <DSAF_SERVICE_NW_NUM ) { - mskid = port; - }else if (port >=DSAF_BASE_INNER_PORT_NUM ) { - mskid = port -DSAF_BASE_INNER_PORT_NUM +DSAF_SERVICE_NW_NUM ; - }else { +/* set MAC port to handle multicast */ + mskid =hns_dsaf_get_port_id (port); +if (mskid == -EINVAL ) {dev_err (dsaf_dev->dev,"%s,pnum(%d)error,key(%#x:%#x)\n" , dsaf_dev->ae_dev.name, port, mask_key.high.val, mask_key.low.val);return ; } +dsaf_set_bit (tbl_tcam_mcast.tbl_mcast_port_msk[mskid /32 ], + mskid %32 ,1 ); +/* set pool bit map to handle multicast */ + mskid =hns_dsaf_get_port_id (port_num); +if (mskid == -EINVAL ) { +dev_err (dsaf_dev->dev, +"%s, pool bit map pnum(%d)error,key(%#x:%#x)\n" , + dsaf_dev->ae_dev.name, port_num, + mask_key.high.val, mask_key.low.val); +return ; + }dsaf_set_bit (tbl_tcam_mcast.tbl_mcast_port_msk[mskid /32 ], mskid %32 ,1 ); +memcpy (&temp_key, &mask_key,sizeof (mask_key)); hns_dsaf_tcam_mc_cfg_vague(dsaf_dev, entry_index, &tbl_tcam_data_mc, (struct dsaf_tbl_tcam_data *)(&mask_key),
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 51/75 net: hns: Fix WARNING when remove HNS driver with SMMU enabled
In reply to Greg Kroah-Hartman[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]
When enable SMMU, remove HNS driver will cause a WARNING:
[ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8 [ 141.954673] Modules linked in: hns_enet_drv(-) [ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32 [ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017 [ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO) [ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8 [ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8 [ 142.027066] sp : ffff000013533b90 [ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600 [ 142.044420] x27: 0000000000000000 x26: 0000000000000000 [ 142.055113] x25: 0000000056000000 x24: 0000000000000015 [ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68 [ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000 [ 142.087192] x19: 0000000000001000 x18: 0000000000000007 [ 142.097885] x17: 000000000000000e x16: 0000000000000001 [ 142.108578] x15: 0000000000000019 x14: 363139343a70616d [ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000 [ 142.129963] x11: 00000000ffffffff x10: 0000000000000006 [ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0 [ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8 [ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000 [ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500 [ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035 [ 142.194120] Call trace: [ 142.199030] __iommu_dma_unmap+0xc0/0xc8 [ 142.206920] iommu_dma_unmap_page+0x20/0x28 [ 142.215335] __iommu_unmap_page+0x40/0x60 [ 142.223399] hnae_unmap_buffer+0x110/0x134 [ 142.231639] hnae_free_desc+0x6c/0x10c [ 142.239177] hnae_fini_ring+0x14/0x34 [ 142.246540] hnae_fini_queue+0x2c/0x40 [ 142.254080] hnae_put_handle+0x38/0xcc [ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv] [ 142.272312] platform_drv_remove+0x24/0x64 [ 142.280552] device_release_driver_internal+0x17c/0x20c [ 142.291070] driver_detach+0x4c/0x90 [ 142.298259] bus_remove_driver+0x5c/0xd8 [ 142.306148] driver_unregister+0x2c/0x54 [ 142.314037] platform_driver_unregister+0x10/0x18 [ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv] [ 142.335248] __arm64_sys_delete_module+0x214/0x25c [ 142.344891] el0_svc_common+0xb0/0x10c [ 142.352430] el0_svc_handler+0x24/0x80 [ 142.359968] el0_svc+0x8/0x7c0 [ 142.366104] ---[ end trace 60ad1cd58e63c407 ]---
The tx ring buffer map when xmit and unmap when xmit done. So in hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring() have a unmap operation for tx ring buffer, which is already unmapped when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(), so the hnae_free_buffers() should be in hnae_fini_ring(), not in hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring(). When the ring buffer is tx ring, adds a piece of code to ensure that the tx ring is unmap.
--- drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/hisilicon/hns/hnae.c +3 -1
@@ -150,7 +150,6 @@ static int hnae_alloc_buffers(struct hnae_ring *ring)/* free desc along with its attached buffer */ static void hnae_free_desc (struct hnae_ring *ring) { -hnae_free_buffers (ring);dma_unmap_single (ring_to_dev (ring), ring->desc_dma_addr, ring->desc_num *sizeof (ring->desc[0 ]),ring_to_dma_dir (ring));
@@ -183,6 +182,9 @@ static int hnae_alloc_desc(struct hnae_ring *ring)/* fini ring, also free the buffer for the ring */ static void hnae_fini_ring (struct hnae_ring *ring) { +if (is_rx_ring (ring)) +hnae_free_buffers (ring); +hnae_free_desc (ring);kfree (ring->desc_cb); ring->desc_cb =NULL ;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 52/75 kmemleak: powerpc: skip scanning holes in the .bss section
In reply to Greg Kroah-Hartman[ Upstream commit 298a32b132087550d3fa80641ca58323c5dfd4d9 ]
Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds kvm_tmp[] into the .bss section and then free the rest of unused spaces back to the page allocator.
kernel_init
kvm_guest_init
kvm_free_tmp
free_reserved_area
free_unref_page
free_unref_page_prepare
With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the result, kmemleak scan will trigger a panic when it scans the .bss section with unmapped pages.
This patch creates dedicated kmemleak objects for the .data, .bss and potentially .data..ro_after_init sections to allow partial freeing via the kmemleak_free_part() in the powerpc kvm_free_tmp() function.
--- arch/powerpc/kernel/kvm.c | 7 +++++++ mm/kmemleak.c | 16 +++++++++++----- 2 files changed, 18 insertions(+), 5 deletions(-)
arch/powerpc/kernel/kvm.c +7 -0
@@ -22,6 +22,7 @@#include <linux/kvm_host.h> #include <linux/init.h> #include <linux/export.h> +#include <linux/kmemleak.h> #include <linux/kvm_para.h> #include <linux/slab.h> #include <linux/of.h>
@@ -712,6 +713,12 @@ static void kvm_use_magic_page(void)static __init void kvm_free_tmp (void ) { +/* +* Inform kmemleak about the hole in the .bss section since the +* corresponding pages will be unmapped with DEBUG_PAGEALLOC=y. +*/ +kmemleak_free_part (&kvm_tmp[kvm_tmp_index], +ARRAY_SIZE (kvm_tmp) - kvm_tmp_index);free_reserved_area (&kvm_tmp[kvm_tmp_index], &kvm_tmp[ARRAY_SIZE (kvm_tmp)],-1 ,NULL ); }
mm/kmemleak.c +11 -5
@@ -1492,11 +1492,6 @@ static void kmemleak_scan(void) }rcu_read_unlock (); -/* data/bss scanning */ -scan_large_block (_sdata, _edata); -scan_large_block (__bss_start, __bss_stop); -scan_large_block (__start_ro_after_init, __end_ro_after_init); -#ifdef CONFIG_SMP /* per-cpu sections scanning */ for_each_possible_cpu (i)
@@ -2027,6 +2022,17 @@ void __init kmemleak_init(void) }local_irq_restore (flags); +/* register the data/bss sections */ +create_object ((unsigned long )_sdata, _edata - _sdata, +KMEMLEAK_GREY ,GFP_ATOMIC ); +create_object ((unsigned long )__bss_start, __bss_stop - __bss_start, +KMEMLEAK_GREY ,GFP_ATOMIC ); +/* only register .data..ro_after_init if not within .data */ +if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata) +create_object ((unsigned long )__start_ro_after_init, + __end_ro_after_init - __start_ro_after_init, +KMEMLEAK_GREY ,GFP_ATOMIC ); +/* * This is the point where tracking allocations is safe. Automatic * scanning is started during the late initcall. Add the early logged
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 53/75 hugetlbfs: fix memory leak for resv_map
In reply to Greg Kroah-Hartman[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ]
When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked.
Programs to reproduce:
mount -t hugetlbfs nodev hugetlbfs
mknod hugetlbfs/dev b 0 0
exec 30<> hugetlbfs/dev
umount hugetlbfs/
resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations.
--- fs/hugetlbfs/inode.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
fs/hugetlbfs/inode.c +14 -6
@@ -730,11 +730,17 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb, umode_t mode, dev_t dev) {struct inode *inode; -struct resv_map *resv_map; +struct resv_map *resv_map =NULL ; - resv_map =resv_map_alloc (); -if (!resv_map) -return NULL ; +/* +* Reserve maps are only needed for inodes that can have associated +* page allocations. +*/ +if (S_ISREG (mode) ||S_ISLNK (mode)) { + resv_map =resv_map_alloc (); +if (!resv_map) +return NULL ; + } inode =new_inode (sb);if (inode) {
@@ -766,8 +772,10 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,break ; }lockdep_annotate_inode_mutex_key (inode); - }else -kref_put (&resv_map->refs, resv_map_release); + }else { +if (resv_map) +kref_put (&resv_map->refs, resv_map_release); + }return inode; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 54/75 sh: fix multiple function definition build errors
In reply to Greg Kroah-Hartman[ Upstream commit acaf892ecbf5be7710ae05a61fd43c668f68ad95 ]
Many of the sh CPU-types have their own plat_irq_setup() and arch_init_clk_ops() functions, so these same (empty) functions in arch/sh/boards/of-generic.c are not needed and cause build errors.
If there is some case where these empty functions are needed, they can be retained by marking them as "__weak" while at the same time making builds that do not need them succeed.
Fixes these build errors:
arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of plat_irq_setup' arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here arch/sh/boards/of-generic.o: In function arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops' arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here
--- arch/sh/boards/of-generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/sh/boards/of-generic.c +2 -2
@@ -180,10 +180,10 @@ static struct sh_machine_vector __initmv sh_of_generic_mv = {struct sh_clk_ops ; -void __init arch_init_clk_ops (struct sh_clk_ops **ops,int idx) +void __init __weak arch_init_clk_ops (struct sh_clk_ops **ops,int idx) { } -void __init plat_irq_setup (void ) +void __init __weak plat_irq_setup (void ) { }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 55/75 xsysace: Fix error handling in ace_setup
In reply to Greg Kroah-Hartman[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]
If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following.
[ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040 [ 10.681826] Faulting instruction address: 0xc0431480 [ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1] [ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440 [ 10.682387] Modules linked in: [ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2 [ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8 [ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+) [ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000 [ 10.683236] DEAR: 00000040 ESR: 00000000 [ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000 [ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000 [ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000 [ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800 [ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114 [ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114 [ 10.684602] Call Trace: [ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable) [ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c [ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68 [ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c [ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508 [ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8 [ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c [ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464 [ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4 [ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc [ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0 [ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234 [ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c [ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac [ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330 [ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478 [ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114 [ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c [ 10.687349] Instruction dump: [ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008 [ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008 [ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]---
Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels.
--- drivers/block/xsysace.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/block/xsysace.c +2 -0
@@ -1063,6 +1063,8 @@ static int ace_setup(struct ace_device *ace)return 0 ; err_read: +/* prevent double queue cleanup */ + ace->gd->queue =NULL ;put_disk (ace->gd); err_alloc_disk:blk_cleanup_queue (ace->queue);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 56/75 ARM: orion: dont use using 64-bit DMA masks
In reply to Greg Kroah-Hartman[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ]
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:
arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
.coherent_dma_mask = DMA_BIT_MASK(64),
^~~~~~~~~~~~~~~~include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.
--- arch/arm/plat-orion/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/plat-orion/common.c +2 -2
@@ -622,7 +622,7 @@ static struct platform_device orion_xor0_shared = { .resource = orion_xor0_shared_resources, .dev = { .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &orion_xor0_pdata, }, };
@@ -683,7 +683,7 @@ static struct platform_device orion_xor1_shared = { .resource = orion_xor1_shared_resources, .dev = { .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &orion_xor1_pdata, }, };
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 57/75 ARM: iop: dont use using 64-bit DMA masks
In reply to Greg Kroah-Hartman[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]
clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:
arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
^ ~~~The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.
--- arch/arm/mach-iop13xx/setup.c | 8 ++++---- arch/arm/mach-iop13xx/tpmi.c | 10 +++++----- arch/arm/plat-iop/adma.c | 6 +++--- 3 files changed, 12 insertions(+), 12 deletions(-)
arch/arm/mach-iop13xx/setup.c +4 -4
@@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = { } }; -static u64 iop13xx_adma_dmamask =DMA_BIT_MASK (64 ); +static u64 iop13xx_adma_dmamask =DMA_BIT_MASK (32 );static struct iop_adma_platform_data iop13xx_adma_0_data = { .hw_id =0 , .pool_size =PAGE_SIZE ,
@@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = { .resource = iop13xx_adma_0_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_0_data, }, };
@@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = { .resource = iop13xx_adma_1_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_1_data, }, };
@@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = { .resource = iop13xx_adma_2_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_2_data, }, };
arch/arm/mach-iop13xx/tpmi.c +5 -5
@@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = { } }; -u64 iop13xx_tpmi_mask =DMA_BIT_MASK (64 ); +u64 iop13xx_tpmi_mask =DMA_BIT_MASK (32 );static struct platform_device iop13xx_tpmi_0_device = { .name ="iop-tpmi" , .id =0 ,
@@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = { .resource = iop13xx_tpmi_0_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = { .resource = iop13xx_tpmi_1_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = { .resource = iop13xx_tpmi_2_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = { .resource = iop13xx_tpmi_3_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, };
arch/arm/plat-iop/adma.c +3 -3
@@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = { .resource = iop3xx_dma_0_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_0_data, }, };
@@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = { .resource = iop3xx_dma_1_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_1_data, }, };
@@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = { .resource = iop3xx_aau_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_aau_data, }, };
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 58/75 perf/x86/amd: Update generic hardware cache events for Family 17h
In reply to Greg Kroah-HartmanFrom: Kim Phillips <[email protected]>
commit 0e3b74e26280f2cf8753717a950b97d424da6046 upstream.
Add a new amd_hw_cache_event_ids_f17h assignment structure set for AMD families 17h and above, since a lot has changed. Specifically:
L1 Data Cache
The data cache access counter remains the same on Family 17h.
For DC misses, PMCx041's definition changes with Family 17h, so instead we use the L2 cache accesses from L1 data cache misses counter (PMCx060,umask=0xc8).
For DC hardware prefetch events, Family 17h breaks compatibility for PMCx067 "Data Prefetcher", so instead, we use PMCx05a "Hardware Prefetch DC Fills."
L1 Instruction Cache
PMCs 0x80 and 0x81 (32-byte IC fetches and misses) are backward compatible on Family 17h.
For prefetches, we remove the erroneous PMCx04B assignment which counts how many software data cache prefetch load instructions were dispatched.
LL - Last Level Cache
Removing PMCs 7D, 7E, and 7F assignments, as they do not exist on Family 17h, where the last level cache is L3. L3 counters can be accessed using the existing AMD Uncore driver.
Data TLB
On Intel machines, data TLB accesses ("dTLB-loads") are assigned to counters that count load/store instructions retired. This is inconsistent with instruction TLB accesses, where Intel implementations report iTLB misses that hit in the STLB.
Ideally, dTLB-loads would count higher level dTLB misses that hit in lower level TLBs, and dTLB-load-misses would report those that also missed in those lower-level TLBs, therefore causing a page table walk. That would be consistent with instruction TLB operation, remove the redundancy between dTLB-loads and L1-dcache-loads, and prevent perf from producing artificially low percentage ratios, i.e. the "0.01%" below:
42,550,869 L1-dcache-loads
41,591,860 dTLB-loads
4,802 dTLB-load-misses # 0.01% of all dTLB cache hits
7,283,682 L1-dcache-stores
7,912,392 dTLB-stores
310 dTLB-store-missesOn AMD Families prior to 17h, the "Data Cache Accesses" counter is used, which is slightly better than load/store instructions retired, but still counts in terms of individual load/store operations instead of TLB operations.
So, for AMD Families 17h and higher, this patch assigns "dTLB-loads" to a counter for L1 dTLB misses that hit in the L2 dTLB, and "dTLB-load-misses" to a counter for L1 DTLB misses that caused L2 DTLB misses and therefore also caused page table walks. This results in a much more accurate view of data TLB performance:
60,961,781 L1-dcache-loads
4,601 dTLB-loads
963 dTLB-load-misses # 20.93% of all dTLB cache hitsNote that for all AMD families, data loads and stores are combined in a single accesses counter, so no 'L1-dcache-stores' are reported separately, and stores are counted with loads in 'L1-dcache-loads'.
Also note that the "% of all dTLB cache hits" string is misleading because (a) "dTLB cache": although TLBs can be considered caches for page tables, in this context, it can be misinterpreted as data cache hits because the figures are similar (at least on Intel), and (b) not all those loads (technically accesses) technically "hit" at that hardware level. "% of all dTLB accesses" would be more clear/accurate.
Instruction TLB
On Intel machines, 'iTLB-loads' measure iTLB misses that hit in the STLB, and 'iTLB-load-misses' measure iTLB misses that also missed in the STLB and completed a page table walk.
For AMD Family 17h and above, for 'iTLB-loads' we replace the erroneous instruction cache fetches counter with PMCx084 "L1 ITLB Miss, L2 ITLB Hit".
For 'iTLB-load-misses' we still use PMCx085 "L1 ITLB Miss, L2 ITLB Miss", but set a 0xff umask because without it the event does not get counted.
Branch Predictor (BPU)
PMCs 0xc2 and 0xc3 continue to be valid across all AMD Families.
Node Level Events
Family 17h does not have a PMCx0e9 counter, and corresponding counters have not been made available publicly, so for now, we mark them as unsupported for Families 17h and above.
Reference:
"Open-Source Register Reference For AMD Family 17h Processors Models 00h-2Fh" Released 7/17/2018, Publication #56255, Revision 3.03:
https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
--- arch/x86/events/amd/core.c | 111 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 108 insertions(+), 3 deletions(-)
arch/x86/events/amd/core.c +108 -3
@@ -116,6 +116,110 @@ static __initconst const u64 amd_hw_cach }, }; +static __initconst const u64 amd_hw_cache_event_ids_f17h + [PERF_COUNT_HW_CACHE_MAX ] + [PERF_COUNT_HW_CACHE_OP_MAX ] + [PERF_COUNT_HW_CACHE_RESULT_MAX ] = { +[C (L1D )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0x0040 ,/* Data Cache Accesses */ + [C (RESULT_MISS )] =0xc860 ,/* L2$ access from DC Miss */ + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =0xff5a ,/* h/w prefetch DC Fills */ + [C (RESULT_MISS )] =0 , + }, +}, +[C (L1I )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0x0080 ,/* Instruction cache fetches */ + [C (RESULT_MISS )] =0x0081 ,/* Instruction cache misses */ + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, +}, +[C (LL )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, +}, +[C (DTLB )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0xff45 ,/* All L2 DTLB accesses */ + [C (RESULT_MISS )] =0xf045 ,/* L2 DTLB misses (PT walks) */ + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, +}, +[C (ITLB )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0x0084 ,/* L1 ITLB misses, L2 ITLB hits */ + [C (RESULT_MISS )] =0xff85 ,/* L1 ITLB misses, L2 misses */ + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, +}, +[C (BPU )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0x00c2 ,/* Retired Branch Instr. */ + [C (RESULT_MISS )] =0x00c3 ,/* Retired Mispredicted BI */ + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, +}, +[C (NODE )] = { + [C (OP_READ )] = { + [C (RESULT_ACCESS )] =0 , + [C (RESULT_MISS )] =0 , + }, + [C (OP_WRITE )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, + [C (OP_PREFETCH )] = { + [C (RESULT_ACCESS )] =-1 , + [C (RESULT_MISS )] =-1 , + }, +}, +}; +/* * AMD Performance Monitor K7 and later, up to and including Family 16h: */
@@ -861,9 +965,10 @@ __init int amd_pmu_init(void) x86_pmu.amd_nb_constraints =0 ; } -/* Events are common for all AMDs */ -memcpy (hw_cache_event_ids, amd_hw_cache_event_ids, -sizeof (hw_cache_event_ids)); +if (boot_cpu_data.x86 >=0x17 ) +memcpy (hw_cache_event_ids, amd_hw_cache_event_ids_f17h,sizeof (hw_cache_event_ids)); +else +memcpy (hw_cache_event_ids, amd_hw_cache_event_ids,sizeof (hw_cache_event_ids));return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 59/75 Bluetooth: btusb: request wake pin with NOAUTOEN
In reply to Greg Kroah-HartmanFrom: Brian Norris <[email protected]>
commit 771acc7e4a6e5dba779cb1a7fd851a164bc81033 upstream.
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq().
We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it.
--- drivers/bluetooth/btusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/btusb.c +1 -1
@@ -2893,6 +2893,7 @@ static int btusb_config_oob_wake(structreturn 0 ; } +irq_set_status_flags (irq,IRQ_NOAUTOEN ); ret =devm_request_irq (&hdev->dev, irq, btusb_oob_wake_handler,0 ,"OOB Wake-on-BT" , data);if (ret) {
@@ -2907,7 +2908,6 @@ static int btusb_config_oob_wake(struct } data->oob_wake_irq = irq; -disable_irq (irq);bt_dev_info (hdev,"OOB Wake-on-BT configured at IRQ %u" , irq);return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 60/75 staging: iio: adt7316: allow adt751x to use internal vref for all dacs
In reply to Greg Kroah-HartmanFrom: Jeremy Fertic <[email protected]>
commit 10bfe7cc1739c22f0aa296b39e53f61e9e3f4d99 upstream.
With adt7516/7/9, internal vref is available for dacs a and b, dacs c and d, or all dacs. The driver doesn't currently support internal vref for all dacs. Change the else if to an if so both bits are checked rather than just one or the other.
--- drivers/staging/iio/addac/adt7316.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/iio/addac/adt7316.c +1 -1
@@ -1086,7 +1086,7 @@ static ssize_t adt7316_store_DAC_interna ldac_config = chip->ldac_config & (~ADT7516_DAC_IN_VREF_MASK );if (data &0x1 ) ldac_config |=ADT7516_DAC_AB_IN_VREF ; -else if (data &0x2 ) +if (data &0x2 ) ldac_config |=ADT7516_DAC_CD_IN_VREF ; }else { ret =kstrtou8 (buf,16 , &data);
Greg Kroah-Hartman
maintainerPATCH 61/75 staging: iio: adt7316: fix the dac read calculation
In reply to Greg Kroah-HartmanFrom: Jeremy Fertic <[email protected]>
commit 45130fb030aec26ac28b4bb23344901df3ec3b7f upstream.
The calculation of the current dac value is using the wrong bits of the dac lsb register. Create two macros to shift the lsb register value into lsb position, depending on whether the dac is 10 or 12 bit. Initialize data to 0 so, with an 8 bit dac, the msb register value can be bitwise ORed with data.
--- drivers/staging/iio/addac/adt7316.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/staging/iio/addac/adt7316.c +8 -2
@@ -47,6 +47,8 @@#define ADT7516_MSB_AIN3 0xA#define ADT7516_MSB_AIN4 0xB#define ADT7316_DA_DATA_BASE 0x10 +#define ADT7316_DA_10_BIT_LSB_SHIFT 6 +#define ADT7316_DA_12_BIT_LSB_SHIFT 4#define ADT7316_DA_MSB_DATA_REGS 4#define ADT7316_LSB_DAC_A 0x10#define ADT7316_MSB_DAC_A 0x11
@@ -1408,7 +1410,7 @@ static IIO_DEVICE_ATTR(ex_analog_temp_ofstatic ssize_t adt7316_show_DAC (struct adt7316_chip_info *chip,int channel,char *buf) { -u16 data; +u16 data =0 ;u8 msb, lsb, offset;int ret;
@@ -1433,7 +1435,11 @@ static ssize_t adt7316_show_DAC(struct aif (ret)return -EIO ; - data = (msb << offset) + (lsb & ((1 << offset) -1 )); +if (chip->dac_bits ==12 ) + data = lsb >>ADT7316_DA_12_BIT_LSB_SHIFT ; +else if (chip->dac_bits ==10 ) + data = lsb >>ADT7316_DA_10_BIT_LSB_SHIFT ; + data |= msb << offset;return sprintf (buf,"%d\n" , data); }
Greg Kroah-Hartman
maintainerPATCH 62/75 staging: iio: adt7316: fix the dac write calculation
In reply to Greg Kroah-HartmanFrom: Jeremy Fertic <[email protected]>
commit 78accaea117c1ae878774974fab91ac4a0b0e2b0 upstream.
The lsb calculation is not masking the correct bits from the user input. Subtract 1 from (1 << offset) to correctly set up the mask to be applied to user input.
The lsb register stores its value starting at the bit 7 position. adt7316_store_DAC() currently assumes the value is at the other end of the register. Shift the lsb value before storing it in a new variable lsb_reg, and write this variable to the lsb register.
--- drivers/staging/iio/addac/adt7316.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/staging/iio/addac/adt7316.c +7 -3
@@ -1447,7 +1447,7 @@ static ssize_t adt7316_show_DAC(struct astatic ssize_t adt7316_store_DAC (struct adt7316_chip_info *chip,int channel,const char *buf,size_t len) { -u8 msb, lsb, offset; +u8 msb, lsb, lsb_reg, offset;u16 data;int ret;
@@ -1465,9 +1465,13 @@ static ssize_t adt7316_store_DAC(structreturn -EINVAL ;if (chip->dac_bits >8 ) { - lsb = data & (1 << offset); + lsb = data & ((1 << offset) -1 ); +if (chip->dac_bits ==12 ) + lsb_reg = lsb <<ADT7316_DA_12_BIT_LSB_SHIFT ; +else + lsb_reg = lsb <<ADT7316_DA_10_BIT_LSB_SHIFT ; ret = chip->bus.write (chip->bus.client, -ADT7316_DA_DATA_BASE + channel *2 , lsb); +ADT7316_DA_DATA_BASE + channel *2 , lsb_reg);if (ret)return -EIO ; }
Greg Kroah-Hartman
maintainerPATCH 63/75 scsi: RDMA/srpt: Fix a credit leak for aborted commands
In reply to Greg Kroah-HartmanFrom: Bart Van Assche <[email protected]>
commit 40ca8757291ca7a8775498112d320205b2a2e571 upstream.
Make sure that the next time a response is sent to the initiator that the credit it had allocated for the aborted request gets freed.
--- drivers/infiniband/ulp/srpt/ib_srpt.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/infiniband/ulp/srpt/ib_srpt.c +11 -0
@@ -2381,8 +2381,19 @@ static void srpt_queue_tm_rsp(struct se_srpt_queue_response (cmd); } +/* +* This function is called for aborted commands if no response is sent to the +* initiator. Make sure that the credits freed by aborting a command are +* returned to the initiator the next time a response is sent by incrementing +* ch->req_lim_delta. +*/ static void srpt_aborted_task (struct se_cmd *cmd) { +struct srpt_send_ioctx *ioctx =container_of (cmd, + struct srpt_send_ioctx, cmd); +struct srpt_rdma_ch *ch = ioctx->ch; + +atomic_inc (&ch->req_lim_delta); }static int srpt_queue_status (struct se_cmd *cmd)
Greg Kroah-Hartman
maintainerPATCH 64/75 ASoC: stm32: fix sai driver name initialisation
In reply to Greg Kroah-HartmanFrom: Arnaud Pouliquen <[email protected]>
commit 17d3069ccf06970e2db3f7cbf4335f207524279e upstream.
This patch fixes the sai driver structure overwriting which results in a cpu dai name equal NULL.
--- sound/soc/stm/stm32_sai_sub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/stm/stm32_sai_sub.c +1 -1
@@ -873,7 +873,6 @@ static int stm32_sai_sub_dais_init(strucif (!sai->cpu_dai_drv)return -ENOMEM ; - sai->cpu_dai_drv->name =dev_name (&pdev->dev);if (STM_SAI_IS_PLAYBACK (sai)) {memcpy (sai->cpu_dai_drv, &stm32_sai_playback_dai,sizeof (stm32_sai_playback_dai));
@@ -883,6 +882,7 @@ static int stm32_sai_sub_dais_init(struc sizeof(stm32_sai_capture_dai)); sai->cpu_dai_drv->capture.stream_name = sai->cpu_dai_drv->name; } + sai->cpu_dai_drv->name =dev_name (&pdev->dev);return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 65/75 IB/core: Unregister notifier before freeing MAD security
In reply to Greg Kroah-HartmanFrom: Daniel Jurgens <[email protected]>
commit d60667fc398ed34b3c7456b020481c55c760e503 upstream.
If the notifier runs after the security context is freed an access of freed memory can occur.
--- drivers/infiniband/core/security.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/core/security.c +2 -1
@@ -732,9 +732,10 @@ void ib_mad_agent_security_cleanup(strucif (!rdma_protocol_ib (agent->device, agent->port_num))return ; -security_ib_free_security (agent->security);if (agent->lsm_nb_reg)unregister_lsm_notifier (&agent->lsm_nb); + +security_ib_free_security (agent->security); }int ib_mad_enforce_security (struct ib_mad_agent_private *map,u16 pkey_index)
Greg Kroah-Hartman
maintainerPATCH 66/75 IB/core: Fix potential memory leak while creating MAD agents
In reply to Greg Kroah-HartmanFrom: Daniel Jurgens <[email protected]>
commit 6e88e672b69f0e627acdae74a527b730ea224b6b upstream.
If the MAD agents isn't allowed to manage the subnet, or fails to register for the LSM notifier, the security context is leaked. Free the context in these cases.
--- drivers/infiniband/core/security.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/infiniband/core/security.c +6 -2
@@ -715,16 +715,20 @@ int ib_mad_agent_security_setup(struct i agent->device->name, agent->port_num);if (ret) -return ret; + goto free_security; agent->lsm_nb.notifier_call = ib_mad_agent_security_change; ret =register_lsm_notifier (&agent->lsm_nb);if (ret) -return ret; + goto free_security; agent->smp_allowed = true; agent->lsm_nb_reg = true;return 0 ; + +free_security: +security_ib_free_security (agent->security); +return ret; }void ib_mad_agent_security_cleanup (struct ib_mad_agent *agent)
Greg Kroah-Hartman
maintainerPATCH 67/75 IB/core: Destroy QP if XRC QP fails
In reply to Greg Kroah-HartmanFrom: Yuval Avnery <[email protected]>
commit 535005ca8e5e71918d64074032f4b9d4fef8981e upstream.
The open-coded variant missed destroy of SELinux created QP, reuse already existing ib_detroy_qp() call and use this opportunity to clean ib_create_qp() from double prints and unclear exit paths.
--- drivers/infiniband/core/verbs.c | 41 +++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-)
drivers/infiniband/core/verbs.c +24 -17
@@ -766,8 +766,8 @@ struct ib_qp *ib_open_qp(struct ib_xrcd }EXPORT_SYMBOL (ib_open_qp); -static struct ib_qp *ib_create_xrc_qp (struct ib_qp *qp, -struct ib_qp_init_attr *qp_init_attr) +static struct ib_qp *create_xrc_qp (struct ib_qp *qp, +struct ib_qp_init_attr *qp_init_attr) {struct ib_qp *real_qp = qp;
@@ -782,10 +782,10 @@ static struct ib_qp *ib_create_xrc_qp(st qp =__ib_open_qp (real_qp, qp_init_attr->event_handler, qp_init_attr->qp_context); -if (!IS_ERR (qp)) -__ib_insert_xrcd_qp (qp_init_attr->xrcd, real_qp); -else - real_qp->device->destroy_qp (real_qp); +if (IS_ERR (qp)) +return qp; + +__ib_insert_xrcd_qp (qp_init_attr->xrcd, real_qp);return qp; }
@@ -816,10 +816,8 @@ struct ib_qp *ib_create_qp(struct ib_pdreturn qp; ret =ib_create_qp_security (qp, device); -if (ret) { -ib_destroy_qp (qp); -return ERR_PTR (ret); - } +if (ret) + goto err; qp->device = device; qp->real_qp = qp;
@@ -834,8 +832,15 @@ struct ib_qp *ib_create_qp(struct ib_pdINIT_LIST_HEAD (&qp->sig_mrs); qp->port =0 ; -if (qp_init_attr->qp_type ==IB_QPT_XRC_TGT ) -return ib_create_xrc_qp (qp, qp_init_attr); +if (qp_init_attr->qp_type ==IB_QPT_XRC_TGT ) { +struct ib_qp *xrc_qp =create_xrc_qp (qp, qp_init_attr); + +if (IS_ERR (xrc_qp)) { + ret =PTR_ERR (xrc_qp); + goto err; + } +return xrc_qp; + } qp->event_handler = qp_init_attr->event_handler; qp->qp_context = qp_init_attr->qp_context;
@@ -863,11 +868,8 @@ struct ib_qp *ib_create_qp(struct ib_pdif (qp_init_attr->cap.max_rdma_ctxs) { ret =rdma_rw_init_mrs (qp, qp_init_attr); -if (ret) { -pr_err ("failed to init MR pool ret= %d\n" , ret); -ib_destroy_qp (qp); -return ERR_PTR (ret); - } +if (ret) + goto err; }/*
@@ -880,6 +882,11 @@ struct ib_qp *ib_create_qp(struct ib_pd device->attrs.max_sge_rd);return qp; + +err: +ib_destroy_qp (qp); +return ERR_PTR (ret); + }EXPORT_SYMBOL (ib_create_qp);
Greg Kroah-Hartman
maintainerPATCH 68/75 Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ
In reply to Greg Kroah-HartmanFrom: Anson Huang <[email protected]>
commit bf2a7ca39fd3ab47ef71c621a7ee69d1813b1f97 upstream.
SNVS IRQ is requested before necessary driver data initialized, if there is a pending IRQ during driver probe phase, kernel NULL pointer panic will occur in IRQ handler. To avoid such scenario, just initialize necessary driver data before enabling IRQ. This patch is inspired by NXP's internal kernel tree.
--- drivers/input/keyboard/snvs_pwrkey.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/input/keyboard/snvs_pwrkey.c +3 -3
@@ -156,6 +156,9 @@ static int imx_snvs_pwrkey_probe(structreturn error; } + pdata->input = input; +platform_set_drvdata (pdev, pdata); + error =devm_request_irq (&pdev->dev, pdata->irq, imx_snvs_pwrkey_interrupt,0 , pdev->name, pdev);
@@ -171,9 +174,6 @@ static int imx_snvs_pwrkey_probe(structreturn error; } - pdata->input = input; -platform_set_drvdata (pdev, pdata); -device_init_wakeup (&pdev->dev, pdata->wakeup);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 69/75 Input: stmfts - acknowledge that setting brightness is a blocking call
In reply to Greg Kroah-HartmanFrom: Dmitry Torokhov <[email protected]>
commit 937c4e552fd1174784045684740edfcea536159d upstream.
We need to turn regulators on and off when switching brightness, and that may block, therefore we have to set stmfts_brightness_set() as LED's brightness_set_blocking() method.
--- drivers/input/touchscreen/stmfts.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)
drivers/input/touchscreen/stmfts.c +16 -14
@@ -111,27 +111,29 @@ struct stmfts_data {bool running; }; -static void stmfts_brightness_set (struct led_classdev *led_cdev, +static int stmfts_brightness_set (struct led_classdev *led_cdev,enum led_brightness value) {struct stmfts_data *sdata =container_of (led_cdev, struct stmfts_data, led_cdev);int err; -if (value == sdata->led_status || !sdata->ledvdd) -return ; - -if (!value) { -regulator_disable (sdata->ledvdd); - }else { - err =regulator_enable (sdata->ledvdd); -if (err) -dev_warn (&sdata->client->dev, -"failed to disable ledvdd regulator: %d\n" , - err); +if (value != sdata->led_status && sdata->ledvdd) { +if (!value) { +regulator_disable (sdata->ledvdd); + }else { + err =regulator_enable (sdata->ledvdd); +if (err) { +dev_warn (&sdata->client->dev, +"failed to disable ledvdd regulator: %d\n" , + err); +return err; + } + } + sdata->led_status = value; } - sdata->led_status = value; +return 0 ; }static enum led_brightness stmfts_brightness_get (struct led_classdev *led_cdev)
@@ -613,7 +615,7 @@ static int stmfts_enable_led(struct stmf sdata->led_cdev.name =STMFTS_DEV_NAME ; sdata->led_cdev.max_brightness =LED_ON ; sdata->led_cdev.brightness =LED_OFF ; - sdata->led_cdev.brightness_set = stmfts_brightness_set; + sdata->led_cdev.brightness_set_blocking = stmfts_brightness_set; sdata->led_cdev.brightness_get = stmfts_brightness_get; err =devm_led_classdev_register (&sdata->client->dev, &sdata->led_cdev);
Greg Kroah-Hartman
maintainerPATCH 70/75 selinux: never allow relabeling on context mounts
In reply to Greg Kroah-HartmanFrom: Ondrej Mosnacek <[email protected]>
commit a83d6ddaebe541570291205cb538e35ad4ff94f9 upstream.
In the SECURITY_FS_USE_MNTPOINT case we never want to allow relabeling files/directories, so we should never set the SBLABEL_MNT flag. The 'special handling' in selinux_is_sblabel_mnt() is only intended for when the behavior is set to SECURITY_FS_USE_GENFS.
While there, make the logic in selinux_is_sblabel_mnt() more explicit and add a BUILD_BUG_ON() to make sure that introducing a new SECURITY_FS_USE_* forces a review of the logic.
--- security/selinux/hooks.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-)
security/selinux/hooks.c +31 -9
@@ -471,16 +471,10 @@ static int may_context_mount_inode_relabreturn rc; } -static int selinux_is_sblabel_mnt (struct super_block *sb) +static int selinux_is_genfs_special_handling (struct super_block *sb) { -struct superblock_security_struct *sbsec = sb->s_security; - -return sbsec->behavior ==SECURITY_FS_USE_XATTR || - sbsec->behavior ==SECURITY_FS_USE_TRANS || - sbsec->behavior ==SECURITY_FS_USE_TASK || - sbsec->behavior ==SECURITY_FS_USE_NATIVE || -/* Special handling. Genfs but also in-core setxattr handler */ - !strcmp (sb->s_type->name,"sysfs" ) || +/* Special handling. Genfs but also in-core setxattr handler */ +return !strcmp (sb->s_type->name,"sysfs" ) || !strcmp (sb->s_type->name,"pstore" ) || !strcmp (sb->s_type->name,"debugfs" ) || !strcmp(sb->s_type->name, "tracefs") ||
@@ -490,6 +484,34 @@ static int selinux_is_sblabel_mnt(struct !strcmp(sb->s_type->name, "cgroup2"))); } +static int selinux_is_sblabel_mnt (struct super_block *sb) +{ +struct superblock_security_struct *sbsec = sb->s_security; + +/* +* IMPORTANT: Double-check logic in this function when adding a new +* SECURITY_FS_USE_* definition! +*/ +BUILD_BUG_ON (SECURITY_FS_USE_MAX !=7 ); + +switch (sbsec->behavior) { +case SECURITY_FS_USE_XATTR : +case SECURITY_FS_USE_TRANS : +case SECURITY_FS_USE_TASK : +case SECURITY_FS_USE_NATIVE : +return 1 ; + +case SECURITY_FS_USE_GENFS : +return selinux_is_genfs_special_handling (sb); + +/* Never allow relabeling on context mounts */ +case SECURITY_FS_USE_MNTPOINT : +case SECURITY_FS_USE_NONE : +default : +return 0 ; + } +} +static int sb_finish_set_opts (struct super_block *sb) {struct superblock_security_struct *sbsec = sb->s_security;
Greg Kroah-Hartman
maintainerPATCH 71/75 powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
In reply to Greg Kroah-HartmanFrom: Aneesh Kumar K.V <[email protected]>
commit 3b4d07d2674f6b4a9281031f99d1f7efd325b16d upstream.
When doing top-down search the low_limit is not PAGE_SIZE but rather max(PAGE_SIZE, mmap_min_addr). This handle cases in which mmap_min_addr > PAGE_SIZE.
--- arch/powerpc/mm/slice.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
arch/powerpc/mm/slice.c +6 -4
@@ -31,6 +31,7 @@#include <linux/spinlock.h> #include <linux/export.h> #include <linux/hugetlb.h> +#include <linux/security.h> #include <asm/mman.h> #include <asm/mmu.h> #include <asm/copro.h>
@@ -328,6 +329,7 @@ static unsigned long slice_find_area_topint pshift =max_t (int, mmu_psize_defs[psize].shift,PAGE_SHIFT );unsigned long addr, found, prev;struct vm_unmapped_area_info info; +unsigned long min_addr =max (PAGE_SIZE , mmap_min_addr); info.flags =VM_UNMAPPED_AREA_TOPDOWN ; info.length = len;
@@ -344,7 +346,7 @@ static unsigned long slice_find_area_topif (high_limit >DEFAULT_MAP_WINDOW ) addr += mm->context.addr_limit -DEFAULT_MAP_WINDOW ; -while (addr >PAGE_SIZE ) { +while (addr > min_addr) { info.high_limit = addr;if (!slice_scan_available (addr -1 , available,0 , &addr))continue ;
@@ -356,8 +358,8 @@ static unsigned long slice_find_area_top* Check if we need to reduce the range, or if we can * extend it to cover the previous available slice. */ -if (addr <PAGE_SIZE ) - addr =PAGE_SIZE ; +if (addr < min_addr) + addr = min_addr;else if (slice_scan_available (addr -1 , available,0 , &prev)) { addr = prev; goto prev_slice;
@@ -479,7 +481,7 @@ unsigned long slice_get_unmapped_area(un addr =_ALIGN_UP (addr, page_size);slice_dbg (" aligned addr=%lx\n" , addr);/* Ignore hint if it's too large or overlaps a VMA */ -if (addr > high_limit - len || +if (addr > high_limit - len || addr < mmap_min_addr || !slice_area_is_free (mm, addr, len)) addr =0 ; }
Greg Kroah-Hartman
maintainerPATCH 72/75 x86/mce: Improve error message when kernel cannot recover, p2
In reply to Greg Kroah-HartmanFrom: Tony Luck <[email protected]>
commit 41f035a86b5b72a4f947c38e94239d20d595352a upstream.
In
c7d606f560e4 ("x86/mce: Improve error message when kernel cannot recover")
a case was added for a machine check caused by a DATA access to poison memory from the kernel. A case should have been added also for an uncorrectable error during an instruction fetch in the kernel.
Add that extra case so the error message now reads:
mce: [Hardware Error]: Machine check: Instruction fetch error in kernel
--- arch/x86/kernel/cpu/mcheck/mce-severity.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/x86/kernel/cpu/mcheck/mce-severity.c +5 -0
@@ -148,6 +148,11 @@ static struct severity { SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA), KERNEL ), + MCESEV( + PANIC, "Instruction fetch error in kernel", + SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR), + KERNEL + ),#endif MCESEV( PANIC, "Action required: unknown MCACOD",
Greg Kroah-Hartman
maintainerPATCH 73/75 clk: x86: Add system specific quirk to mark clocks as critical
In reply to Greg Kroah-HartmanFrom: David Müller <[email protected]>
commit 7c2e07130090ae001a97a6b65597830d6815e93e upstream.
Since commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are unconditionally gated off. Unfortunately this will break systems where these clocks are used for external purposes beyond the kernel's knowledge. Fix it by implementing a system specific quirk to mark the necessary pmc_plt_clks as critical.
--- drivers/clk/x86/clk-pmc-atom.c | 14 +++++++++++--- drivers/platform/x86/pmc_atom.c | 21 +++++++++++++++++++++ include/linux/platform_data/x86/clk-pmc-atom.h | 3 +++ 3 files changed, 35 insertions(+), 3 deletions(-)
drivers/clk/x86/clk-pmc-atom.c +11 -3
@@ -165,7 +165,7 @@ static const struct clk_ops plt_clk_ops };static struct clk_plt *plt_clk_register (struct platform_device *pdev,int id, -void __iomem *base, +const struct pmc_clk_data *pmc_data,const char **parent_names,int num_parents) {
@@ -184,9 +184,17 @@ static struct clk_plt *plt_clk_register( init.num_parents = num_parents; pclk->hw.init = &init; - pclk->reg = base +PMC_CLK_CTL_OFFSET + id *PMC_CLK_CTL_SIZE ; + pclk->reg = pmc_data->base +PMC_CLK_CTL_OFFSET + id *PMC_CLK_CTL_SIZE ;spin_lock_init (&pclk->lock); +/* +* On some systems, the pmc_plt_clocks already enabled by the +* firmware are being marked as critical to avoid them being +* gated by the clock framework. +*/ +if (pmc_data->critical &&plt_clk_is_enabled (&pclk->hw)) + init.flags |=CLK_IS_CRITICAL ; + ret =devm_clk_hw_register (&pdev->dev, &pclk->hw);if (ret) { pclk =ERR_PTR (ret);
@@ -332,7 +340,7 @@ static int plt_clk_probe(struct platformreturn PTR_ERR (parent_names);for (i =0 ; i <PMC_CLK_NUM ; i++) { - data->clks[i] =plt_clk_register (pdev, i, pmc_data->base, + data->clks[i] =plt_clk_register (pdev, i, pmc_data, parent_names, data->nparents);if (IS_ERR (data->clks[i])) { err =PTR_ERR (data->clks[i]);
drivers/platform/x86/pmc_atom.c +21 -0
@@ -17,6 +17,7 @@#include <linux/debugfs.h> #include <linux/device.h> +#include <linux/dmi.h> #include <linux/init.h> #include <linux/io.h> #include <linux/platform_data/x86/clk-pmc-atom.h>
@@ -421,11 +422,27 @@ static int pmc_dbgfs_register(struct pmc }#endif /* CONFIG_DEBUG_FS */ +/* +* Some systems need one or more of their pmc_plt_clks to be +* marked as critical. +*/ +static const struct dmi_system_id critclk_systems[]__initconst = { + { + .ident ="MPL CEC1x" , + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"MPL AG" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"CEC10 Family" ), + }, + }, + {/*sentinel*/ } +}; +static int pmc_setup_clks (struct pci_dev *pdev,void __iomem *pmc_regmap,const struct pmc_data *pmc_data) {struct platform_device *clkdev;struct pmc_clk_data *clk_data; +const struct dmi_system_id *d =dmi_first_match (critclk_systems); clk_data =kzalloc (sizeof (*clk_data),GFP_KERNEL );if (!clk_data)
@@ -433,6 +450,10 @@ static int pmc_setup_clks(struct pci_dev clk_data->base = pmc_regmap;/* offset is added by client */ clk_data->clks = pmc_data->clks; +if (d) { + clk_data->critical = true; +pr_info ("%s critclks quirk enabled\n" , d->ident); + } clkdev = platform_device_register_data(&pdev->dev, "clk-pmc-atom", PLATFORM_DEVID_NONE,
include/linux/platform_data/x86/clk-pmc-atom.h +3 -0
@@ -35,10 +35,13 @@ struct pmc_clk {* * @base: PMC clock register base offset * @clks: pointer to set of registered clocks, typically 0..5 +* @critical: flag to indicate if firmware enabled pmc_plt_clks +* should be marked as critial or not */ struct pmc_clk_data {void __iomem *base;const struct pmc_clk *clks; +bool critical; };#endif /* __PLATFORM_DATA_X86_CLK_PMC_ATOM_H */
Greg Kroah-Hartman
maintainerPATCH 74/75 i2c: i2c-stm32f7: Fix SDADEL minimum formula
In reply to Greg Kroah-HartmanFrom: Nicolas Le Bayon <[email protected]>
commit c86da50cfd840edf223a242580913692acddbcf6 upstream.
It conforms with Reference Manual I2C timing section.
--- drivers/i2c/busses/i2c-stm32f7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-stm32f7.c +1 -1
@@ -340,7 +340,7 @@ static int stm32f7_i2c_compute_timing(st STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0); dnf_delay = setup->dnf * i2cclk; - sdadel_min = setup->fall_time - i2c_specs[setup->speed].hddat_min - + sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time - af_delay_min - (setup->dnf +3 ) * i2cclk; sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -
Greg Kroah-Hartman
maintainerPATCH 75/75 media: v4l2: i2c: ov7670: Fix PLL bypass register values
In reply to Greg Kroah-HartmanFrom: Jacopo Mondi <[email protected]>
commit 61da76beef1e4f0b6ba7be4f8d0cf0dac7ce1f55 upstream.
The following commits:
commit f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675") commit 04ee6d92047e ("[media] media: ov7670: add possibility to bypass pll for ov7675") introduced the ability to bypass PLL multiplier and use input clock (xvclk) as pixel clock output frequency for ov7675 sensor.
PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675 sensor manuals. Macros used to set DBLV register seem wrong in the driver, as their values do not match what reported in the datasheet.
Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to default 0x0a reserved value (according to datasheets).
While at there, remove a write to DBLV register in "ov7675_set_framerate()" that over-writes the previous one to the same register that takes "info->pll_bypass" flag into account instead of setting PLL multiplier to 4x unconditionally.
And, while at there, since "info->pll_bypass" is only used in set/get_framerate() functions used by ov7675 only, it is not necessary to check for the device id at probe time to make sure that when using ov7670 "info->pll_bypass" is set to false.
--- drivers/media/i2c/ov7670.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)
drivers/media/i2c/ov7670.c +6 -10
@@ -158,10 +158,10 @@ MODULE_PARM_DESC(debug, "Debug level (0-#define REG_GFIX 0x69/* Fix gain control */ #define REG_DBLV 0x6b/* PLL control an debugging */ -#define DBLV_BYPASS 0x00/* Bypass PLL */ -#define DBLV_X4 0x01/* clock x4 */ -#define DBLV_X6 0x10/* clock x6 */ -#define DBLV_X8 0x11/* clock x8 */ +#define DBLV_BYPASS 0x0a/* Bypass PLL */ +#define DBLV_X4 0x4a/* clock x4 */ +#define DBLV_X6 0x8a/* clock x6 */ +#define DBLV_X8 0xca/* clock x8 */ #define REG_REG76 0x76/* OV's name */ #define R76_BLKPCOR 0x80/* Black pixel correction enable */
@@ -837,7 +837,7 @@ static int ov7675_set_framerate(struct vif (ret <0 )return ret; -return ov7670_write (sd,REG_DBLV ,DBLV_X4 ); +return 0 ; } static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
@@ -1601,11 +1601,7 @@ static int ov7670_probe(struct i2c_clienif (config->clock_speed) info->clock_speed = config->clock_speed; -/* -* It should be allowed for ov7670 too when it is migrated to -* the new frame rate formula. -*/ -if (config->pll_bypass && id->driver_data !=MODEL_OV7670 ) +if (config->pll_bypass) info->pll_bypass = true;if (config->pclk_hb_disable)
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.117 release. There are 75 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed 08 May 2019 02:29:19 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.117-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.14.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.14.117-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 2e004f6acb8062e310cf8e50c91d562d91dcdb73
git describe: v4.14.116-76-g2e004f6acb80
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.116-76-g2e004f6acb80
No regressions (compared to build v4.14.116)
No fixes (compared to build v4.14.116)
Ran 22369 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* kvm-unit-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite
Signature · 2 lines
Linaro LKFT https://lkft.linaro.org
Jon Hunter
maintainerQuoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.117 release. There are 75 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed 08 May 2019 02:29:19 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.117-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.14.y
and the diffstat can be found below.thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 failLinux version: 4.14.117-rc1-g2e004f6
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
Signature · 1 line
nvpublic
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.117 release. There are 75 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed 08 May 2019 02:29:19 PM UTC. Anything received after that time might be too late.
Build results:
total: 172 pass: 172 fail: 0 Qemu test results: total: 333 pass: 333 fail: 0
Guenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.117 release. There are 75 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed 08 May 2019 02:29:19 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.117-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.14.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
stable-rc/linux-4.14.y boot: 64 boots: 0 failed, 64 passed (v4.14.116-76-g2e004f6acb80)
stable-rc/linux-4.14.y boot: 64 boots: 0 failed, 64 passed (v4.14.116-76-g2e004f6acb80)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.116-76-g2e004f6acb80/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.116-76-g2e004f6acb80/
Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.116-76-g2e004f6acb80
Git Commit: 2e004f6acb8062e310cf8e50c91d562d91dcdb73
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 31 unique boards, 15 SoC families, 10 builds out of 201
---
For more info write to <[email protected]>