ASoC: Intel: Add Cometlake PCI IDs
Subsystems (4)
v2 cover ASoC: Intel: Add Cometlake PCI IDs
This small series adds PCI IDs for Cometlake platforms, for a dazzling audio experience.
Changes in v2:
- Add CML-H ID 0x06c8 (Pierre-Louis)
- Add 0x06c8 for CML-H (Pierre-Louis)
Evan Green (2):
ASoC: SOF: Add Comet Lake PCI IDs
ASoC: Intel: Skylake: Add Cometlake PCI IDs
sound/soc/intel/Kconfig | 18 +++++++++++++++ sound/soc/intel/skylake/skl-messages.c | 16 +++++++++++++ sound/soc/intel/skylake/skl.c | 10 ++++++++ sound/soc/sof/intel/Kconfig | 32 ++++++++++++++++++++++++++ sound/soc/sof/sof-pci-dev.c | 8 +++++++ 5 files changed, 84 insertions(+)
Signature · 1 line
2.20.1
PATCH v2 1/2 ASoC: SOF: Add Comet Lake PCI IDs
Add support for Intel Comet Lake platforms by adding a new Kconfig for CometLake and the appropriate PCI IDs.
---
Changes in v2:
- Add CML-H ID 0x06c8 (Pierre-Louis)
sound/soc/sof/intel/Kconfig | 32 ++++++++++++++++++++++++++++++++ sound/soc/sof/sof-pci-dev.c | 8 ++++++++ 2 files changed, 40 insertions(+)
sound/soc/sof/intel/Kconfig +32 -0
@@ -24,6 +24,8 @@ config SND_SOC_SOF_INTEL_PCI select SND_SOC_SOF_CANNONLAKE if SND_SOC_SOF_CANNONLAKE_SUPPORT select SND_SOC_SOF_COFFEELAKE if SND_SOC_SOF_COFFEELAKE_SUPPORT select SND_SOC_SOF_ICELAKE if SND_SOC_SOF_ICELAKE_SUPPORT + select SND_SOC_SOF_COMETLAKE_LP if SND_SOC_SOF_COMETLAKE_LP_SUPPORT + select SND_SOC_SOF_COMETLAKE_H if SND_SOC_SOF_COMETLAKE_H_SUPPORT help This option is not user-selectable but automagically handled by 'select' statements at a higher level
@@ -179,6 +181,36 @@ config SND_SOC_SOF_ICELAKE This option is not user-selectable but automagically handled by 'select' statements at a higher level +config SND_SOC_SOF_COMETLAKE_LP + tristate + select SND_SOC_SOF_CANNONLAKE + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level + +config SND_SOC_SOF_COMETLAKE_LP_SUPPORT + bool "SOF support for CometLake-LP" + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Cometlake-LP processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_COMETLAKE_H + tristate + select SND_SOC_SOF_CANNONLAKE + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level + +config SND_SOC_SOF_COMETLAKE_H_SUPPORT + bool "SOF support for CometLake-H" + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Cometlake-H processors. + Say Y if you have such a device. + If unsure select "N". + config SND_SOC_SOF_HDA_COMMON tristate select SND_SOC_SOF_INTEL_COMMON
sound/soc/sof/sof-pci-dev.c +8 -0
@@ -353,6 +353,14 @@ static const struct pci_device_id sof_pci_ids[] = { #if IS_ENABLED(CONFIG_SND_SOC_SOF_ICELAKE) { PCI_DEVICE(0x8086, 0x34C8), .driver_data = (unsigned long)&icl_desc}, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP) + { PCI_DEVICE(0x8086, 0x02c8), + .driver_data = (unsigned long)&cnl_desc}, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H) + { PCI_DEVICE(0x8086, 0x06c8), + .driver_data = (unsigned long)&cnl_desc}, #endif { 0, } };
Signature · 1 line
2.20.1
Re: [PATCH v2 1/2] ASoC: SOF: Add Comet Lake PCI IDs
Minor nit-picks below. The Kconfig would work but select CANNONLAKE even if you don't want it.
sound/soc/sof/intel/Kconfig config SND_SOC_SOF_ICELAKE · line 186
Quoted 4 lines
sound/soc/sof/intel/Kconfig +3
-0+config SND_SOC_SOF_COMETLAKE_LP + tristate + select SND_SOC_SOF_CANNONLAKE
This should be
select SND_SOF_SOF_HDA_COMMON
Quoted 5 lines
sound/soc/sof/intel/Kconfig +5
-0+ help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level + +config SND_SOC_SOF_COMETLAKE_LP_SUPPORT
sound/soc/sof/intel/Kconfig config SND_SOC_SOF_ICELAKE · line 201
Quoted 10 lines
sound/soc/sof/intel/Kconfig +10
-0+ bool "SOF support for CometLake-LP" + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Cometlake-LP processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_COMETLAKE_H + tristate + select SND_SOC_SOF_CANNONLAKE
This should be
select SND_SOF_SOF_HDA_COMMON
Quoted 11 lines
sound/soc/sof/intel/Kconfig +11
-0+ help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level + +config SND_SOC_SOF_COMETLAKE_H_SUPPORT + bool "SOF support for CometLake-H" + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Cometlake-H processors. + Say Y if you have such a device. + If unsure select "N".
Re: [PATCH v2 1/2] ASoC: SOF: Add Comet Lake PCI IDs
Quoted 11 lines · Pierre-Louis Bossart
Minor nit-picks below. The
Kconfigwould work but select CANNONLAKE even if you don't want it.sound/soc/sof/intel/Kconfig config SND_SOC_SOF_ICELAKE · line 186
Quoted 4 lines
sound/soc/sof/intel/Kconfig +3
-0+config SND_SOC_SOF_COMETLAKE_LP + tristate + select SND_SOC_SOF_CANNONLAKEThis should be
selectSND_SOF_SOF_HDA_COMMON
You mean SND_SOC_SOF_HDA_COMMON I assume.
Except that I also need &cnl_desc, so I need CANNONLAKE to be on as well. Should I select them both?
-Evan
Re: [PATCH v2 1/2] ASoC: SOF: Add Comet Lake PCI IDs
Quoted 11 lines · Evan Green
Quoted 9 lines · Pierre-Louis Bossart
Minor nit-picks below. The
Kconfigwould work but select CANNONLAKE even if you don't want it.Quoted 4 lines
sound/soc/sof/intel/Kconfig +3
-0+config SND_SOC_SOF_COMETLAKE_LP + tristate + select SND_SOC_SOF_CANNONLAKE
Quoted 6 lines
Quoted 2 lines
This should be
selectSND_SOF_SOF_HDA_COMMONYou mean
SND_SOC_SOF_HDA_COMMONI assume.
Except that I also need&cnl_desc, so I need CANNONLAKE to be on as well. Should I select them both?
Ah I see. I'd rather use a different descriptor then, and make the two platforms independent, as I did for CoffeeLake. You can use the same descriptor for the two -H and -LP skews though.
Re: [PATCH v2 1/2] ASoC: SOF: Add Comet Lake PCI IDs
Quoted 18 lines · Pierre-Louis Bossart
Quoted 14 lines · Evan Green
Quoted 11 lines · Pierre-Louis Bossart
Minor nit-picks below. The
Kconfigwould work but select CANNONLAKE even if you don't want it.sound/soc/sof/intel/Kconfig config SND_SOC_SOF_ICELAKE · line 186
Quoted 4 lines
sound/soc/sof/intel/Kconfig +3
-0+config SND_SOC_SOF_COMETLAKE_LP + tristate + select SND_SOC_SOF_CANNONLAKEThis should be
selectSND_SOF_SOF_HDA_COMMON
Quoted 7 lines
Quoted 3 lines
You mean
SND_SOC_SOF_HDA_COMMONI assume.
Except that I also need&cnl_desc, so I need CANNONLAKE to be on as well. Should I select them both?Ah I see. I'd rather use a different descriptor then, and make the two platforms independent, as I did for CoffeeLake. You can use the same descriptor for the two -H and -LP skews though.
Ok, I'll add a cml_desc and have it conditionally compiled in on either _LP or _H Kconfig.
-Evan
PATCH v2 2/2 ASoC: Intel: Skylake: Add Cometlake PCI IDs
In reply to Evan GreenAdd PCI IDs for Intel CometLake platforms, which from a software point of view are extremely similar to Cannonlake platforms.
---
Changes in v2:
- Add 0x06c8 for CML-H (Pierre-Louis)
sound/soc/intel/Kconfig | 18 ++++++++++++++++++ sound/soc/intel/skylake/skl-messages.c | 16 ++++++++++++++++ sound/soc/intel/skylake/skl.c | 10 ++++++++++ 3 files changed, 44 insertions(+)
sound/soc/intel/Kconfig +18 -0
@@ -110,6 +110,8 @@ config SND_SOC_INTEL_SKYLAKE select SND_SOC_INTEL_GLK select SND_SOC_INTEL_CNL select SND_SOC_INTEL_CFL + select SND_SOC_INTEL_CML_H + select SND_SOC_INTEL_CML_LP help This is a backwards-compatible option to select all devices supported by the Intel SST/Skylake driver. This option is no
@@ -165,6 +167,22 @@ config SND_SOC_INTEL_CFL If you have a Intel CoffeeLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. +config SND_SOC_INTEL_CML_H + tristate "CometLake-H Platforms" + depends on PCI && ACPI + select SND_SOC_INTEL_SKYLAKE_FAMILY + help + If you have a Intel CometLake-H platform with the DSP + enabled in the BIOS then enable this option by saying Y or m. + +config SND_SOC_INTEL_CML_LP + tristate "CometLake-LP Platforms" + depends on PCI && ACPI + select SND_SOC_INTEL_SKYLAKE_FAMILY + help + If you have a Intel CometLake-LP platform with the DSP + enabled in the BIOS then enable this option by saying Y or m. + config SND_SOC_INTEL_SKYLAKE_FAMILY tristate select SND_SOC_INTEL_SKYLAKE_COMMON
sound/soc/intel/skylake/skl-messages.c +16 -0
@@ -255,6 +255,22 @@ static const struct skl_dsp_ops dsp_ops[] = { .init_fw = cnl_sst_init_fw, .cleanup = cnl_sst_dsp_cleanup }, + { + .id = 0x02c8, + .num_cores = 4, + .loader_ops = bxt_get_loader_ops, + .init = cnl_sst_dsp_init, + .init_fw = cnl_sst_init_fw, + .cleanup = cnl_sst_dsp_cleanup + }, + { + .id = 0x06c8, + .num_cores = 4, + .loader_ops = bxt_get_loader_ops, + .init = cnl_sst_dsp_init, + .init_fw = cnl_sst_init_fw, + .cleanup = cnl_sst_dsp_cleanup + }, };const struct skl_dsp_ops *skl_get_dsp_ops (int pci_id)
sound/soc/intel/skylake/skl.c +10 -0
@@ -1166,6 +1166,16 @@ static const struct pci_device_id skl_ids[] = { /* CFL */ { PCI_DEVICE(0x8086, 0xa348), .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CML_LP) + /* CML-LP */ + { PCI_DEVICE(0x8086, 0x02c8), + .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CML_H) + /* CML-H */ + { PCI_DEVICE(0x8086, 0x06c8), + .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, #endif { 0, } };
Signature · 1 line
2.20.1
Re: [PATCH v2 2/2] ASoC: Intel: Skylake: Add Cometlake PCI IDs
Quoted 2 lines · Evan Green
Add PCI IDs for Intel CometLake platforms, which from a software point of view are extremely similar to Cannonlake platforms.
Humm, I have mixed feelings here.
Yes the hardware is nearly identical, with the exception of one detail that's not visible to the kernel, but there is no support for DMICs with the Skylake driver w/ HDaudio, and Chrome platforms are only going with SOF, so is it wise to add these two CometLake platforms to the default SND_SOC_INTEL_SKYLAKE selector, which is used by a number of distributions?
I don't mind if we add those PCI IDs and people use this driver if they wish to, but it may be time for an explicit opt-in? The SND_SOC_INTEL_SKYLAKE definition should even be pruned to mean SKL, APL, KBL and GLK, and we can add DMI-based quirks for e.g. the Up2 board and GLK Chromebooks which work with SOF.
Quoted 97 lines
Signed-off-by Evan Green <[email protected]>---
Changes in v2:
- Add0x06c8for CML-H (Pierre-Louis)sound/soc/intel/Kconfig | 18 ++++++++++++++++++ sound/soc/intel/skylake/skl-messages.c | 16 ++++++++++++++++ sound/soc/intel/skylake/skl.c | 10 ++++++++++ 3 files changed, 44 insertions(+)sound/soc/intel/Kconfig +18
-0@@ -110,6 +110,8 @@ config SND_SOC_INTEL_SKYLAKE select SND_SOC_INTEL_GLK select SND_SOC_INTEL_CNL select SND_SOC_INTEL_CFL + select SND_SOC_INTEL_CML_H + select SND_SOC_INTEL_CML_LP help This is a backwards-compatible option to select all devices supported by the Intel SST/Skylake driver. This option is no@@ -165,6 +167,22 @@ config SND_SOC_INTEL_CFL If you have a Intel CoffeeLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. +config SND_SOC_INTEL_CML_H + tristate "CometLake-H Platforms" + depends on PCI && ACPI + select SND_SOC_INTEL_SKYLAKE_FAMILY + help + If you have a Intel CometLake-H platform with the DSP + enabled in the BIOS then enable this option by saying Y or m. + +config SND_SOC_INTEL_CML_LP + tristate "CometLake-LP Platforms" + depends on PCI && ACPI + select SND_SOC_INTEL_SKYLAKE_FAMILY + help + If you have a Intel CometLake-LP platform with the DSP + enabled in the BIOS then enable this option by saying Y or m. + config SND_SOC_INTEL_SKYLAKE_FAMILY tristate select SND_SOC_INTEL_SKYLAKE_COMMONsound/soc/intel/skylake/skl-messages.c +16
-0@@ -255,6 +255,22 @@ static const struct skl_dsp_ops dsp_ops[] = { .init_fw = cnl_sst_init_fw, .cleanup = cnl_sst_dsp_cleanup }, + { + .id = 0x02c8, + .num_cores = 4, + .loader_ops = bxt_get_loader_ops, + .init = cnl_sst_dsp_init, + .init_fw = cnl_sst_init_fw, + .cleanup = cnl_sst_dsp_cleanup + }, + { + .id = 0x06c8, + .num_cores = 4, + .loader_ops = bxt_get_loader_ops, + .init = cnl_sst_dsp_init, + .init_fw = cnl_sst_init_fw, + .cleanup = cnl_sst_dsp_cleanup + }, };const struct skl_dsp_ops *skl_get_dsp_ops (int pci_id)sound/soc/intel/skylake/skl.c +10
-0@@ -1166,6 +1166,16 @@ static const struct pci_device_id skl_ids[] = { /* CFL */ { PCI_DEVICE(0x8086, 0xa348), .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CML_LP) + /* CML-LP */ + { PCI_DEVICE(0x8086, 0x02c8), + .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CML_H) + /* CML-H */ + { PCI_DEVICE(0x8086, 0x06c8), + .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, #endif { 0, } };
Re: [PATCH v2 2/2] ASoC: Intel: Skylake: Add Cometlake PCI IDs
Quoted 13 lines · Pierre-Louis Bossart
Quoted 2 lines · Evan Green
Add PCI IDs for Intel CometLake platforms, which from a software point of view are extremely similar to Cannonlake platforms.
Humm, I have mixed feelings here.
Yes the hardware is nearly identical, with the exception of one detail that's not visible to the kernel, but there is no support for DMICs with the Skylake driver w/ HDaudio, and Chrome platforms are only going with SOF, so is it wise to add these two CometLake platforms to the default
SND_SOC_INTEL_SKYLAKEselector, which is used by a number of distributions?
Quoted 5 lines
I don't mind if we add those PCI IDs and people use this driver if they wish to, but it may be time for an explicit opt-in? The
SND_SOC_INTEL_SKYLAKEdefinition should even be pruned to mean SKL, APL, KBL and GLK, and we can add DMI-based quirks for e.g. the Up2 board and GLK Chromebooks which work with SOF.
I don't have the context here, so feel free to ignore me. But it seems like such a tiny amount of extra bits to add to make Cometlake work, and then there's no hassle for the distributions when Cometlake devices start showing up in the wild. So while things are more or less the same, why not continue piggypacking off the default?
Or are you saying that the lack of DMIC support means the default should be to use a different driver?
-Evan
Re: [PATCH v2 2/2] ASoC: Intel: Skylake: Add Cometlake PCI IDs
Quoted 21 lines · Evan Green
Quoted 13 lines · Pierre-Louis Bossart
Quoted 2 lines · Evan Green
Add PCI IDs for Intel CometLake platforms, which from a software point of view are extremely similar to Cannonlake platforms.
Humm, I have mixed feelings here.
Yes the hardware is nearly identical, with the exception of one detail that's not visible to the kernel, but there is no support for DMICs with the Skylake driver w/ HDaudio, and Chrome platforms are only going with SOF, so is it wise to add these two CometLake platforms to the default
SND_SOC_INTEL_SKYLAKEselector, which is used by a number of distributions?Quoted 5 lines
I don't mind if we add those PCI IDs and people use this driver if they wish to, but it may be time for an explicit opt-in? The
SND_SOC_INTEL_SKYLAKEdefinition should even be pruned to mean SKL, APL, KBL and GLK, and we can add DMI-based quirks for e.g. the Up2 board and GLK Chromebooks which work with SOF.
Quoted 7 lines
I don't have the context here, so feel free to ignore me. But it seems like such a tiny amount of extra bits to add to make Cometlake work, and then there's no hassle for the distributions when Cometlake devices start showing up in the wild. So while things are more or less the same, why not continue piggypacking off the default?
Or are you saying that the lack of DMIC support means the default should be to use a different driver?
Yes, it's the latter case, SOF will be the only driver supporting DMICs on CometLake, so it'd be better to avoid creating a conflict with SOF or enabling a configuration by default which is known to have restrictions. It's fine to add the CML IDs, but better avoid adding CML under the SKYLAKE all-you-can-eat selector.
Re: [PATCH v2 2/2] ASoC: Intel: Skylake: Add Cometlake PCI IDs
Quoted 33 lines · Pierre-Louis Bossart
Quoted 21 lines · Evan Green
Quoted 13 lines · Pierre-Louis Bossart
Quoted 2 lines · Evan Green
Add PCI IDs for Intel CometLake platforms, which from a software point of view are extremely similar to Cannonlake platforms.
Humm, I have mixed feelings here.
Yes the hardware is nearly identical, with the exception of one detail that's not visible to the kernel, but there is no support for DMICs with the Skylake driver w/ HDaudio, and Chrome platforms are only going with SOF, so is it wise to add these two CometLake platforms to the default
SND_SOC_INTEL_SKYLAKEselector, which is used by a number of distributions?Quoted 5 lines
I don't mind if we add those PCI IDs and people use this driver if they wish to, but it may be time for an explicit opt-in? The
SND_SOC_INTEL_SKYLAKEdefinition should even be pruned to mean SKL, APL, KBL and GLK, and we can add DMI-based quirks for e.g. the Up2 board and GLK Chromebooks which work with SOF.Quoted 7 lines
I don't have the context here, so feel free to ignore me. But it seems like such a tiny amount of extra bits to add to make Cometlake work, and then there's no hassle for the distributions when Cometlake devices start showing up in the wild. So while things are more or less the same, why not continue piggypacking off the default?
Or are you saying that the lack of DMIC support means the default should be to use a different driver?
Quoted 5 lines
Yes, it's the latter case, SOF will be the only driver supporting DMICs on CometLake, so it'd be better to avoid creating a conflict with SOF or enabling a configuration by default which is known to have restrictions. It's fine to add the CML IDs, but better avoid adding CML under the SKYLAKE all-you-can-eat selector.
Ok, I'll plan to remove the new selects from under SND_SOC_INTEL_SKYLAKE.