ASoC: max98357a: release GPIO when component removing
PATCH 1/1 ASoC: max98357a: release GPIO when component removing
Component's probe() gets GPIO for "sdmode-gpios" via devm_gpiod_get_optional(). The GPIO binds to the device.
When the component get removed but the device does not, the GPIO still binds to the device. Then, when the component be probed again, devm_gpiod_get_optional() returns EBUSY.
Release the GPIO proactively when component is removing.
--- sound/soc/codecs/max98357a.c | 42 ++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 9 deletions(-)
sound/soc/codecs/max98357a.c +33 -9
@@ -27,24 +27,28 @@#include <sound/soc-dai.h> #include <sound/soc-dapm.h> +struct max98357a_priv { +struct gpio_desc *sdmode; +}; +static int max98357a_daiops_trigger (struct snd_pcm_substream *substream,int cmd,struct snd_soc_dai *dai) { -struct gpio_desc *sdmode =snd_soc_dai_get_drvdata (dai); +struct max98357a_priv *max98357a =snd_soc_dai_get_drvdata (dai); -if (!sdmode) +if (!max98357a->sdmode)return 0 ;switch (cmd) {case SNDRV_PCM_TRIGGER_START :case SNDRV_PCM_TRIGGER_RESUME :case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : -gpiod_set_value (sdmode,1 ); +gpiod_set_value (max98357a->sdmode,1 );break ;case SNDRV_PCM_TRIGGER_STOP :case SNDRV_PCM_TRIGGER_SUSPEND :case SNDRV_PCM_TRIGGER_PAUSE_PUSH : -gpiod_set_value (sdmode,0 ); +gpiod_set_value (max98357a->sdmode,0 );break ; }
@@ -61,19 +65,31 @@ static const struct snd_soc_dapm_route max98357a_dapm_routes[] = {static int max98357a_component_probe (struct snd_soc_component *component) { -struct gpio_desc *sdmode; +struct max98357a_priv *max98357a = +snd_soc_component_get_drvdata (component); - sdmode =devm_gpiod_get_optional (component->dev,"sdmode" ,GPIOD_OUT_LOW ); -if (IS_ERR (sdmode)) -return PTR_ERR (sdmode); + max98357a->sdmode =devm_gpiod_get_optional (component->dev, +"sdmode" ,GPIOD_OUT_LOW ); +if (IS_ERR (max98357a->sdmode)) +return PTR_ERR (max98357a->sdmode); -snd_soc_component_set_drvdata (component, sdmode); +snd_soc_component_set_drvdata (component, max98357a);return 0 ; } +static void max98357a_component_remove (struct snd_soc_component *component) +{ +struct max98357a_priv *max98357a = +snd_soc_component_get_drvdata (component); + +if (max98357a->sdmode) +devm_gpiod_put (component->dev, max98357a->sdmode); +} +static const struct snd_soc_component_driver max98357a_component_driver = { .probe = max98357a_component_probe, + .remove = max98357a_component_remove, .dapm_widgets = max98357a_dapm_widgets, .num_dapm_widgets =ARRAY_SIZE (max98357a_dapm_widgets), .dapm_routes = max98357a_dapm_routes,
@@ -112,6 +128,14 @@ static struct snd_soc_dai_driver max98357a_dai_driver = {static int max98357a_platform_probe (struct platform_device *pdev) { +struct max98357a_priv *max98357a; + + max98357a =devm_kzalloc (&pdev->dev,sizeof (*max98357a),GFP_KERNEL ); +if (!max98357a) +return -ENOMEM ; + +dev_set_drvdata (&pdev->dev, max98357a); +return devm_snd_soc_register_component (&pdev->dev, &max98357a_component_driver, &max98357a_dai_driver,1 );
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
Mark Brown
maintainersound/soc/codecs/max98357a.c static const struct snd_soc_dapm_route max98357a_dapm_routes[] = { · line 88
Quoted 8 lines · Tzung-Bi Shih
sound/soc/codecs/max98357a.c +8
-0+static void max98357a_component_remove (struct snd_soc_component *component) +{ +struct max98357a_priv *max98357a = +snd_soc_component_get_drvdata (component); + +if (max98357a->sdmode) +devm_gpiod_put (component->dev, max98357a->sdmode); +}
This is an obvious mess, if you're explicitly freeing devm_ allocated resources in the common case something is going wrong. Just move the initial allocation to the device level probe so devm can do what it's supposed to.
Quoted 15 lines · Tzung-Bi Shih
sound/soc/codecs/max98357a.c static const struct snd_soc_dapm_route max98357a_dapm_routes[] = { · line 88
Quoted 9 lines
sound/soc/codecs/max98357a.c +8
-0+static void max98357a_component_remove (struct snd_soc_component *component) +{ +struct max98357a_priv *max98357a = +snd_soc_component_get_drvdata (component); + +if (max98357a->sdmode) +devm_gpiod_put (component->dev, max98357a->sdmode); +}This is an obvious mess, if you're explicitly freeing
devm_allocated resources in the common case something is going wrong. Just move the initial allocation to the device level probe so devm can do what it's supposed to.
Move the GPIO allocation to max98357a_platform_probe() should work but I am wondering the difference between device's probe() and component's probe(). What do we expect to do in component's probe()? As component's probe() is later than device's, I thought we tend to put resource allocation in component's probe() for reasons:
- to speed up the booting *maybe* a little
- to allocate resources when really need them
I am using devm_gpiod_put() instead of gpiod_put() so that I suppose devm_ should take care of the rest of cleanup. Do you think this is still a mess?
Mark Brown
maintainerQuoted 1 line · Tzung-Bi Shih
probe(). What do we expect to do in component'sprobe()?
Only things that really, really need the card.
Quoted 4 lines
As component's
probe()is later than device's, I thought we tend to put resource allocation in component'sprobe()for reasons:
- to speed up the booting *maybe* a little
- to allocate resources when really need them
No, this is backwards - there's no point in running through the ASoC level initialization only to find out we don't have some critical resource.
Quoted 3 lines
I am using
devm_gpiod_put()instead ofgpiod_put()so that I supposedevm_should take care of the rest of cleanup. Do you think this is still a mess?
The entire point of devm_ is that it does all the cleanup for you.