4.9.175-stable review
Subsystems (3)
Greg Kroah-Hartman
maintainercover 4.9.175-stable review
This is the start of the stable review cycle for the 4.9.175 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat 11 May 2019 06:11:12 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.175-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.175-rc1
Ben Hutchings <[email protected]>
timer/debug: Change /proc/timer_stats from 0644 to 0600
Ross Zwisler <[email protected]>
ASoC: Intel: avoid Oops if DMA setup fails
Oliver Neukum <[email protected]>
UAS: fix alignment of scatter/gather segments
Marcel Holtmann <[email protected]>
Bluetooth: Align minimum encryption key size for LE and BR/EDR connections
Young Xiao <[email protected]>
Bluetooth: hidp: fix buffer overflow
Andrew Vasquez <[email protected]>
scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines
Alan Stern <[email protected]>
usb-storage: Set virt_boundary_mask to avoid SG overflows
Ji-Ze Hong (Peter Hong) <[email protected]>
USB: serial: f81232: fix interrupt worker not stop
Thinh Nguyen <[email protected]>
usb: dwc3: Fix default lpm_nyet_threshold value
Prasad Sodagudi <[email protected]>
genirq: Prevent use-after-free and work list corruption
Ard Biesheuvel <[email protected]>
ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
Linus Torvalds <[email protected]>
mm: add 'try_get_page()' helper function
Joerg Roedel <[email protected]>
iommu/amd: Set exclusion range correctly
Dongli Zhang <[email protected]>
virtio-blk: limit number of hw queues by nr_cpu_ids
Wen Yang <[email protected]>
drm/mediatek: fix possible object reference leak
Varun Prakash <[email protected]>
scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
Max Filippov <[email protected]>
xtensa: fix initialization of pt_regs::syscall in start_thread
Jann Horn <[email protected]>
linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
Stephane Eranian <[email protected]>
perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
Dan Carpenter <[email protected]>
drm/mediatek: Fix an error code in mtk_hdmi_dt_parse_pdata()
Annaliese McDermond <[email protected]>
ASoC: tlv320aic32x4: Fix Common Pins
Kaike Wan <[email protected]>
IB/hfi1: Eliminate opcode tests on mr deref
Daniel Mack <[email protected]>
ASoC: cs4270: Set auto-increment bit for register writes
John Hsu <[email protected]>
ASoC: nau8810: fix the issue of widget with prefixed name
Rander Wang <[email protected]>
ASoC:soc-pcm:fix a codec fixup issue in TDM case
Johan Hovold <[email protected]>
staging: greybus: power_supply: fix prop-descriptor request size
Andrey Ryabinin <[email protected]>
ubsan: Fix nasty -Wbuiltin-declaration-mismatch GCC-9 warnings
Jason Yan <[email protected]>
scsi: libsas: fix a race condition when smp task timeout
-------------
Diffstat:
Makefile | 4 +-- arch/arm/boot/compressed/efi-header.S | 3 ++- arch/x86/events/intel/core.c | 2 +- arch/xtensa/include/asm/processor.h | 21 ++++++++------- drivers/block/virtio_blk.c | 2 ++ drivers/gpu/drm/mediatek/mtk_hdmi.c | 2 +- drivers/infiniband/hw/hfi1/rc.c | 4 +-- drivers/iommu/amd_iommu_init.c | 2 +- drivers/scsi/csiostor/csio_scsi.c | 5 +++- drivers/scsi/libsas/sas_expander.c | 9 +++---- drivers/scsi/qla2xxx/qla_attr.c | 4 +-- drivers/staging/greybus/power_supply.c | 2 +- drivers/usb/dwc3/core.c | 2 +- drivers/usb/serial/f81232.c | 39 +++++++++++++++++++++++++++ drivers/usb/storage/scsiglue.c | 26 +++++++++--------- drivers/usb/storage/uas.c | 35 +++++++++++++++--------- include/linux/kernel.h | 4 +-- include/linux/mm.h | 9 +++++++ include/net/bluetooth/hci_core.h | 3 +++ kernel/irq/manage.c | 4 ++- kernel/time/timer_stats.c | 2 +- lib/ubsan.c | 49 ++++++++++++++++------------------ net/bluetooth/hci_conn.c | 8 ++++++ net/bluetooth/hidp/sock.c | 1 + sound/soc/codecs/cs4270.c | 1 + sound/soc/codecs/nau8810.c | 4 +-- sound/soc/codecs/tlv320aic32x4.c | 2 ++ sound/soc/intel/common/sst-firmware.c | 8 ++++-- sound/soc/soc-pcm.c | 7 +++-- 29 files changed, 174 insertions(+), 90 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/28 scsi: libsas: fix a race condition when smp task timeout
From: Jason Yan <[email protected]>
commit b90cd6f2b905905fb42671009dc0e27c310a16ae upstream.
When the lldd is processing the complete sas task in interrupt and set the task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be triggered at the same time. And smp_task_timedout() will complete the task wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed before lldd end the interrupt process. Thus a use-after-free will happen.
Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not set. And remove the check of the return value of the del_timer(). Once the LLDD sets DONE, it must call task->done(), which will call smp_task_done()->complete() and the task will be completed and freed correctly.
--- drivers/scsi/libsas/sas_expander.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/scsi/libsas/sas_expander.c +4 -5
@@ -47,17 +47,16 @@ static void smp_task_timedout(unsigned lunsigned long flags;spin_lock_irqsave (&task->task_state_lock, flags); -if (!(task->task_state_flags &SAS_TASK_STATE_DONE )) +if (!(task->task_state_flags &SAS_TASK_STATE_DONE )) { task->task_state_flags |=SAS_TASK_STATE_ABORTED ; +complete (&task->slow_task->completion); + }spin_unlock_irqrestore (&task->task_state_lock, flags); - -complete (&task->slow_task->completion); }static void smp_task_done (struct sas_task *task) { -if (!del_timer (&task->slow_task->timer)) -return ; +del_timer (&task->slow_task->timer);complete (&task->slow_task->completion); }
Greg Kroah-Hartman
maintainerPATCH 2/28 ubsan: Fix nasty -Wbuiltin-declaration-mismatch GCC-9 warnings
In reply to Greg Kroah-HartmanFrom: Andrey Ryabinin <[email protected]>
commit f0996bc2978e02d2ea898101462b960f6119b18f upstream.
Building lib/ubsan.c with gcc-9 results in a ton of nasty warnings like this one:
lib/ubsan.c warning: conflicting types for built-in function
‘__ubsan_handle_negate_overflow’; expected ‘void(void *, void *)’ [-Wbuiltin-declaration-mismatch]
The kernel's declarations of __ubsan_handle_*() often uses 'unsigned long' types in parameters while GCC these parameters as 'void *' types, hence the mismatch.
Fix this by using 'void *' to match GCC's declarations.
--- lib/ubsan.c | 49 +++++++++++++++++++++++-------------------------- 1 file changed, 23 insertions(+), 26 deletions(-)
lib/ubsan.c +23 -26
@@ -86,11 +86,13 @@ static bool is_inline_int(struct type_dereturn bits <= inline_bits; } -static s_max get_signed_val (struct type_descriptor *type,unsigned long val) +static s_max get_signed_val (struct type_descriptor *type,void *val) {if (is_inline_int (type)) {unsigned extra_bits =sizeof (s_max)*8 -type_bit_width (type); -return ((s_max )val) << extra_bits >> extra_bits; +unsigned long ulong_val = (unsigned long )val; + +return ((s_max )ulong_val) << extra_bits >> extra_bits; }if (type_bit_width (type) ==64 )
@@ -99,15 +101,15 @@ static s_max get_signed_val(struct type_return *(s_max *)val; } -static bool val_is_negative (struct type_descriptor *type,unsigned long val) +static bool val_is_negative (struct type_descriptor *type,void *val) {return type_is_signed (type) &&get_signed_val (type, val) <0 ; } -static u_max get_unsigned_val (struct type_descriptor *type,unsigned long val) +static u_max get_unsigned_val (struct type_descriptor *type,void *val) {if (is_inline_int (type)) -return val; +return (unsigned long )val;if (type_bit_width (type) ==64 )return *(u64 *)val;
@@ -116,7 +118,7 @@ static u_max get_unsigned_val(struct typ }static void val_to_string (char *str,size_t size,struct type_descriptor *type, -unsigned long value) +void *value) {if (type_is_int (type)) {if (type_bit_width (type) ==128 ) {
@@ -168,8 +170,8 @@ static void ubsan_epilogue(unsigned long current->in_ubsan--; } -static void handle_overflow (struct overflow_data *data,unsigned long lhs, -unsigned long rhs,char op) +static void handle_overflow (struct overflow_data *data,void *lhs, +void *rhs,char op) {struct type_descriptor *type = data->type;
@@ -196,8 +198,7 @@ static void handle_overflow(struct overf }void __ubsan_handle_add_overflow (struct overflow_data *data, -unsigned long lhs, -unsigned long rhs) +void *lhs,void *rhs) {handle_overflow (data, lhs, rhs,'+' );
@@ -205,23 +206,21 @@ void __ubsan_handle_add_overflow(structEXPORT_SYMBOL (__ubsan_handle_add_overflow);void __ubsan_handle_sub_overflow (struct overflow_data *data, -unsigned long lhs, -unsigned long rhs) +void *lhs,void *rhs) {handle_overflow (data, lhs, rhs,'-' ); }EXPORT_SYMBOL (__ubsan_handle_sub_overflow);void __ubsan_handle_mul_overflow (struct overflow_data *data, -unsigned long lhs, -unsigned long rhs) +void *lhs,void *rhs) {handle_overflow (data, lhs, rhs,'*' ); }EXPORT_SYMBOL (__ubsan_handle_mul_overflow);void __ubsan_handle_negate_overflow (struct overflow_data *data, -unsigned long old_val) +void *old_val) {unsigned long flags;char old_val_str[VALUE_LENGTH ];
@@ -242,8 +241,7 @@ EXPORT_SYMBOL(__ubsan_handle_negate_overvoid __ubsan_handle_divrem_overflow (struct overflow_data *data, -unsigned long lhs, -unsigned long rhs) +void *lhs,void *rhs) {unsigned long flags;char rhs_val_str[VALUE_LENGTH ];
@@ -328,7 +326,7 @@ static void ubsan_type_mismatch_common(s }void __ubsan_handle_type_mismatch (struct type_mismatch_data *data, -unsigned long ptr) +void *ptr) {struct type_mismatch_data_common common_data = { .location = &data->location,
@@ -337,12 +335,12 @@ void __ubsan_handle_type_mismatch(struct .type_check_kind = data->type_check_kind }; -ubsan_type_mismatch_common (&common_data, ptr); +ubsan_type_mismatch_common (&common_data, (unsigned long )ptr); }EXPORT_SYMBOL (__ubsan_handle_type_mismatch);void __ubsan_handle_type_mismatch_v1 (struct type_mismatch_data_v1 *data, -unsigned long ptr) +void *ptr) {struct type_mismatch_data_common common_data = {
@@ -352,7 +350,7 @@ void __ubsan_handle_type_mismatch_v1(str .type_check_kind = data->type_check_kind }; -ubsan_type_mismatch_common (&common_data, ptr); +ubsan_type_mismatch_common (&common_data, (unsigned long )ptr); }EXPORT_SYMBOL (__ubsan_handle_type_mismatch_v1);
@@ -376,7 +374,7 @@ void __ubsan_handle_nonnull_return(strucEXPORT_SYMBOL (__ubsan_handle_nonnull_return);void __ubsan_handle_vla_bound_not_positive (struct vla_bound_data *data, -unsigned long bound) +void *bound) {unsigned long flags;char bound_str[VALUE_LENGTH ];
@@ -393,8 +391,7 @@ void __ubsan_handle_vla_bound_not_positi }EXPORT_SYMBOL (__ubsan_handle_vla_bound_not_positive); -void __ubsan_handle_out_of_bounds (struct out_of_bounds_data *data, -unsigned long index) +void __ubsan_handle_out_of_bounds (struct out_of_bounds_data *data,void *index) {unsigned long flags;char index_str[VALUE_LENGTH ];
@@ -412,7 +409,7 @@ void __ubsan_handle_out_of_bounds(structEXPORT_SYMBOL (__ubsan_handle_out_of_bounds);void __ubsan_handle_shift_out_of_bounds (struct shift_out_of_bounds_data *data, -unsigned long lhs,unsigned long rhs) +void *lhs,void *rhs) {unsigned long flags;struct type_descriptor *rhs_type = data->rhs_type;
@@ -463,7 +460,7 @@ void __ubsan_handle_builtin_unreachable(EXPORT_SYMBOL (__ubsan_handle_builtin_unreachable);void __ubsan_handle_load_invalid_value (struct invalid_value_data *data, -unsigned long val) +void *val) {unsigned long flags;char val_str[VALUE_LENGTH ];
Greg Kroah-Hartman
maintainerPATCH 3/28 staging: greybus: power_supply: fix prop-descriptor request size
In reply to Greg Kroah-HartmanFrom: Johan Hovold <[email protected]>
commit 47830c1127ef166af787caf2f871f23089610a7f upstream.
Since moving the message buffers off the stack, the dynamically allocated get-prop-descriptor request buffer is incorrectly sized due to using the pointer rather than request-struct size when creating the operation.
Fortunately, the pointer size is always larger than this one-byte request, but this could still cause trouble on the remote end due to the unexpected message size.
--- drivers/staging/greybus/power_supply.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/greybus/power_supply.c +1 -1
@@ -521,7 +521,7 @@ static int gb_power_supply_prop_descript op =gb_operation_create (connection,GB_POWER_SUPPLY_TYPE_GET_PROP_DESCRIPTORS , -sizeof (req),sizeof (*resp) + props_count * +sizeof (*req),sizeof (*resp) + props_count *sizeof (struct gb_power_supply_props_desc ),GFP_KERNEL );if (!op)
Greg Kroah-Hartman
maintainerPATCH 4/28 ASoC:soc-pcm:fix a codec fixup issue in TDM case
In reply to Greg Kroah-Hartman[ Upstream commit 570f18b6a8d1f0e60e8caf30e66161b6438dcc91 ]
On HDaudio platforms, if playback is started when capture is working, there is no audible output.
This can be root-caused to the use of the rx|tx_mask to store an HDaudio stream tag.
If capture is stared before playback, rx_mask would be non-zero on HDaudio platform, then the channel number of playback, which is in the same codec dai with the capture, would be changed by soc_pcm_codec_params_fixup based on the tx_mask at first, then overwritten by this function based on rx_mask at last.
According to the author of tx|rx_mask, tx_mask is for playback and rx_mask is for capture. And stream direction is checked at all other references of tx|rx_mask in ASoC, so here should be an error. This patch checks stream direction for tx|rx_mask for fixup function.
This issue would affect not only HDaudio+ASoC, but also I2S codecs if the channel number based on rx_mask is not equal to the one for tx_mask. It could be rarely reproduecd because most drivers in kernel set the same channel number to tx|rx_mask or rx_mask is zero.
Tested on all platforms using stream_tag & HDaudio and intel I2S platforms.
--- sound/soc/soc-pcm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
sound/soc/soc-pcm.c +5 -2
@@ -894,10 +894,13 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, codec_params = *params;/* fixup params based on TDM slot masks */ -if (codec_dai->tx_mask) +if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK && + codec_dai->tx_mask)soc_pcm_codec_params_fixup (&codec_params, codec_dai->tx_mask); -if (codec_dai->rx_mask) + +if (substream->stream ==SNDRV_PCM_STREAM_CAPTURE && + codec_dai->rx_mask)soc_pcm_codec_params_fixup (&codec_params, codec_dai->rx_mask);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 5/28 ASoC: nau8810: fix the issue of widget with prefixed name
In reply to Greg Kroah-Hartman[ Upstream commit 54d1cf78b0f4ba348a7c7fb8b7d0708d71b6cc8a ]
The driver changes the stream name of DAC and ADC to avoid the issue of widget with prefixed name. When the machine adds prefixed name for codec, the stream name of DAI may not find the widgets.
--- sound/soc/codecs/nau8810.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/nau8810.c +2 -2
@@ -414,9 +414,9 @@ static const struct snd_soc_dapm_widget nau8810_dapm_widgets[] = {SND_SOC_DAPM_MIXER ("Mono Mixer" ,NAU8810_REG_POWER3 ,NAU8810_MOUTMX_EN_SFT ,0 , &nau8810_mono_mixer_controls[0 ],ARRAY_SIZE (nau8810_mono_mixer_controls)), -SND_SOC_DAPM_DAC ("DAC" ,"HiFi Playback" ,NAU8810_REG_POWER3 , +SND_SOC_DAPM_DAC ("DAC" ,"Playback" ,NAU8810_REG_POWER3 ,NAU8810_DAC_EN_SFT ,0 ), -SND_SOC_DAPM_ADC ("ADC" ,"HiFi Capture" ,NAU8810_REG_POWER2 , +SND_SOC_DAPM_ADC ("ADC" ,"Capture" ,NAU8810_REG_POWER2 ,NAU8810_ADC_EN_SFT ,0 ),SND_SOC_DAPM_PGA ("SpkN Out" ,NAU8810_REG_POWER3 , NAU8810_NSPK_EN_SFT, 0, NULL, 0),
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 6/28 ASoC: cs4270: Set auto-increment bit for register writes
In reply to Greg Kroah-Hartman[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]
The CS4270 does not by default increment the register address on consecutive writes. During normal operation it doesn't matter as all register accesses are done individually. At resume time after suspend, however, the regcache code gathers the biggest possible block of registers to sync and sends them one on one go.
To fix this, set the INCR bit in all cases.
--- sound/soc/codecs/cs4270.c | 1 + 1 file changed, 1 insertion(+)
sound/soc/codecs/cs4270.c +1 -0
@@ -643,6 +643,7 @@ static const struct regmap_config cs4270_regmap = { .reg_defaults = cs4270_reg_defaults, .num_reg_defaults = ARRAY_SIZE(cs4270_reg_defaults), .cache_type = REGCACHE_RBTREE, + .write_flag_mask = CS4270_I2C_INCR, .readable_reg = cs4270_reg_is_readable, .volatile_reg = cs4270_reg_is_volatile,
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 7/28 IB/hfi1: Eliminate opcode tests on mr deref
In reply to Greg Kroah-Hartman[ Upstream commit a8639a79e85c18c16c10089edd589c7948f19bbd ]
When an old ack_queue entry is used to store an incoming request, it may need to clean up the old entry if it is still referencing the MR. Originally only RDMA READ request needed to reference MR on the responder side and therefore the opcode was tested when cleaning up the old entry. The introduction of tid rdma specific operations in the ack_queue makes the specific opcode tests wrong. Multiple opcodes (RDMA READ, TID RDMA READ, and TID RDMA WRITE) may need MR ref cleanup.
Remove the opcode specific tests associated with the ack_queue.
--- drivers/infiniband/hw/hfi1/rc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/hfi1/rc.c +2 -2
@@ -2394,7 +2394,7 @@ void hfi1_rc_rcv(struct hfi1_packet *packet)update_ack_queue (qp, next); } e = &qp->s_ack_queue[qp->r_head_ack_queue]; -if (e->opcode ==OP (RDMA_READ_REQUEST ) && e->rdma_sge.mr) { +if (e->rdma_sge.mr) {rvt_put_mr (e->rdma_sge.mr); e->rdma_sge.mr =NULL ; }
@@ -2469,7 +2469,7 @@ void hfi1_rc_rcv(struct hfi1_packet *packet)update_ack_queue (qp, next); } e = &qp->s_ack_queue[qp->r_head_ack_queue]; -if (e->opcode ==OP (RDMA_READ_REQUEST ) && e->rdma_sge.mr) { +if (e->rdma_sge.mr) {rvt_put_mr (e->rdma_sge.mr); e->rdma_sge.mr =NULL ; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 8/28 ASoC: tlv320aic32x4: Fix Common Pins
In reply to Greg Kroah-Hartman[ Upstream commit c63adb28f6d913310430f14c69f0a2ea55eed0cc ]
The common pins were mistakenly not added to the DAPM graph. Adding these pins will allow valid graphs to be created.
--- sound/soc/codecs/tlv320aic32x4.c | 2 ++ 1 file changed, 2 insertions(+)
sound/soc/codecs/tlv320aic32x4.c +2 -0
@@ -316,6 +316,8 @@ static const struct snd_soc_dapm_widget aic32x4_dapm_widgets[] = {SND_SOC_DAPM_INPUT ("IN2_R" ),SND_SOC_DAPM_INPUT ("IN3_L" ),SND_SOC_DAPM_INPUT ("IN3_R" ), +SND_SOC_DAPM_INPUT ("CM_L" ), + SND_SOC_DAPM_INPUT("CM_R"), }; static const struct snd_soc_dapm_route aic32x4_dapm_routes[] = {
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 9/28 drm/mediatek: Fix an error code in mtk_hdmi_dt_parse_pdata()
In reply to Greg Kroah-Hartman[ Upstream commit 2d85978341e6a32e7443d9f28639da254d53f400 ]
We don't want to overwrite "ret", it already holds the correct error code. The "regmap" variable might be a valid pointer as this point.
--- drivers/gpu/drm/mediatek/mtk_hdmi.c | 1 - 1 file changed, 1 deletion(-)
drivers/gpu/drm/mediatek/mtk_hdmi.c +0 -1
@@ -1473,7 +1473,6 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,if (IS_ERR (regmap)) ret =PTR_ERR (regmap);if (ret) { - ret =PTR_ERR (regmap);dev_err (dev,"Failed to get system configuration registers: %d\n" , ret);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 10/28 perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
In reply to Greg Kroah-Hartman[ Upstream commit 583feb08e7f7ac9d533b446882eb3a54737a6dbb ]
When an event is programmed with attr.wakeup_events=N (N>0), it means the caller is interested in getting a user level notification after N samples have been recorded in the kernel sampling buffer.
With precise events on Intel processors, the kernel uses PEBS. The kernel tries minimize sampling overhead by verifying
if the event configuration is compatible with multi-entry PEBS mode. If so, the kernel is notified only when the buffer has reached its threshold. Other PEBS operates in single-entry mode, the kenrel is notified for each PEBS sample.
The problem is that the current implementation look at frequency mode and event sample_type but ignores the wakeup_events field. Thus, it may not be possible to receive a notification after each precise event.
This patch fixes this problem by disabling multi-entry PEBS if wakeup_events is non-zero.
--- arch/x86/events/intel/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/events/intel/core.c +1 -1
@@ -2867,7 +2867,7 @@ static int intel_pmu_hw_config(struct perf_event *event)return ret;if (event->attr.precise_ip) { -if (!event->attr.freq) { +if (!(event->attr.freq || event->attr.wakeup_events)) { event->hw.flags |=PERF_X86_EVENT_AUTO_RELOAD ;if (!(event->attr.sample_type & ~intel_pmu_free_running_flags (event)))
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 11/28 linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
In reply to Greg Kroah-Hartman[ Upstream commit a0fe2c6479aab5723239b315ef1b552673f434a3 ]
Use parentheses around uses of the argument in u64_to_user_ptr() to ensure that the cast doesn't apply to part of the argument.
There are existing uses of the macro of the form
u64_to_user_ptr(A + B)
which expands to
(void __user *)(uintptr_t)A + B
(the cast applies to the first operand of the addition, the addition is a pointer addition). This happens to still work as intended, the semantic difference doesn't cause a difference in behavior.
But I want to use u64_to_user_ptr() with a ternary operator in the argument, like so:
u64_to_user_ptr(A ? B : C)
This currently doesn't work as intended.
--- include/linux/kernel.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/kernel.h +2 -2
@@ -55,8 +55,8 @@#define u64_to_user_ptr (x) ( \ { \ - typecheck(u64, x); \ - (void __user *)(uintptr_t)x; \ + typecheck(u64, (x)); \ + (void __user *)(uintptr_t)(x); \ } \ )
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 12/28 xtensa: fix initialization of pt_regs::syscall in start_thread
In reply to Greg Kroah-Hartman[ Upstream commit 2663147dc7465cb29040a05cc4286fdd839978b5 ]
New pt_regs should indicate that there's no syscall, not that there's syscall #0. While at it wrap macro body in do/while and parenthesize macro arguments.
--- arch/xtensa/include/asm/processor.h | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
arch/xtensa/include/asm/processor.h +12 -9
@@ -180,15 +180,18 @@ struct thread_struct {/* Clearing a0 terminates the backtrace. */ #define start_thread (regs, new_pc, new_sp) \ - memset(regs, 0, sizeof(*regs)); \ - regs->pc = new_pc; \ - regs->ps = USER_PS_VALUE; \ - regs->areg[1] = new_sp; \ - regs->areg[0] = 0; \ - regs->wmask = 1; \ - regs->depc = 0; \ - regs->windowbase = 0; \ - regs->windowstart = 1; + do { \ + memset((regs), 0, sizeof(*(regs))); \ + (regs)->pc = (new_pc); \ + (regs)->ps = USER_PS_VALUE; \ + (regs)->areg[1] = (new_sp); \ + (regs)->areg[0] = 0; \ + (regs)->wmask = 1; \ + (regs)->depc = 0; \ + (regs)->windowbase = 0; \ + (regs)->windowstart = 1; \ + (regs)->syscall = NO_SYSCALL; \ + } while (0)/* Forward declaration */ struct task_struct ;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 13/28 scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
In reply to Greg Kroah-Hartman[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]
If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done().
--- drivers/scsi/csiostor/csio_scsi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/csiostor/csio_scsi.c +4 -1
@@ -1713,8 +1713,11 @@ csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req) } out: -if (req->nsge >0 ) +if (req->nsge >0 ) {scsi_dma_unmap (cmnd); +if (req->dcopy && (host_status ==DID_OK )) + host_status =csio_scsi_copy_to_sgl (hw, req); + } cmnd->result = (((host_status) <<16 ) | scsi_status); cmnd->scsi_done (cmnd);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 14/28 drm/mediatek: fix possible object reference leak
In reply to Greg Kroah-Hartman[ Upstream commit 2ae2c3316fb77dcf64275d011596b60104c45426 ]
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
--- drivers/gpu/drm/mediatek/mtk_hdmi.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/mediatek/mtk_hdmi.c +1 -0
@@ -1528,6 +1528,7 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,of_node_put (remote); hdmi->ddc_adpt =of_find_i2c_adapter_by_node (i2c_np); +of_node_put (i2c_np);if (!hdmi->ddc_adpt) {dev_err (dev,"Failed to get ddc i2c adapter by node\n" );return -EINVAL ;
Signature · 8 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Greg Kroah-Hartman
maintainerPATCH 15/28 virtio-blk: limit number of hw queues by nr_cpu_ids
In reply to Greg Kroah-Hartman[ Upstream commit bf348f9b78d413e75bb079462751a1d86b6de36c ]
When tag_set->nr_maps is 1, the block layer limits the number of hw queues by nr_cpu_ids. No matter how many hw queues are used by virtio-blk, as it has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw queues.
In addition, specifically for pci scenario, when the 'num-queues' specified by qemu is more than maxcpus, virtio-blk would not be able to allocate more than maxcpus vectors in order to have a vector for each queue. As a result, it falls back into MSI-X with one vector for config and one shared for queues.
Considering above reasons, this patch limits the number of hw queues used by virtio-blk by nr_cpu_ids.
--- drivers/block/virtio_blk.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/block/virtio_blk.c +2 -0
@@ -392,6 +392,8 @@ static int init_vq(struct virtio_blk *vblk)if (err) num_vqs =1 ; + num_vqs = min_t(unsigned int, nr_cpu_ids, num_vqs); + vblk->vqs =kmalloc_array (num_vqs,sizeof (*vblk->vqs),GFP_KERNEL );if (!vblk->vqs)return -ENOMEM ;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 16/28 iommu/amd: Set exclusion range correctly
In reply to Greg Kroah-Hartman[ Upstream commit 3c677d206210f53a4be972211066c0f1cd47fe12 ]
The exlcusion range limit register needs to contain the base-address of the last page that is part of the range, as bits 0-11 of this register are treated as 0xfff by the hardware for comparisons.
So correctly set the exclusion range in the hardware to the last page which is _in_ the range.
--- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/amd_iommu_init.c +1 -1
@@ -318,7 +318,7 @@ static void iommu_write_l2(struct amd_iommu *iommu, u8 address, u32 val)static void iommu_set_exclusion_range (struct amd_iommu *iommu) {u64 start = iommu->exclusion_start &PAGE_MASK ; -u64 limit = (start + iommu->exclusion_length) &PAGE_MASK ; +u64 limit = (start + iommu->exclusion_length -1 ) &PAGE_MASK ;u64 entry;if (!iommu->exclusion_start)
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 17/28 mm: add try_get_page() helper function
In reply to Greg Kroah-Hartman[ Upstream commit 88b1a17dfc3ed7728316478fae0f5ad508f50397 ]
This is the same as the traditional 'get_page()' function, but instead of unconditionally incrementing the reference count of the page, it only does so if the count was "safe". It returns whether the reference count was incremented (and is marked __must_check, since the caller obviously has to be aware of it).
Also like 'get_page()', you can't use this function unless you already had a reference to the page. The intent is that you can use this exactly like get_page(), but in situations where you want to limit the maximum reference count.
The code currently does an unconditional WARN_ON_ONCE() if we ever hit the reference count issues (either zero or negative), as a notification that the conditional non-increment actually happened.
NOTE! The count access for the "safety" check is inherently racy, but that doesn't matter since the buffer we use is basically half the range of the reference count (ie we look at the sign of the count).
--- include/linux/mm.h | 9 +++++++++ 1 file changed, 9 insertions(+)
include/linux/mm.h +9 -0
@@ -777,6 +777,15 @@ static inline void get_page(struct page *page)get_zone_device_page (page); } +static inline __must_check bool try_get_page (struct page *page) +{ + page =compound_head (page); +if (WARN_ON_ONCE (page_ref_count (page) <=0 )) +return false; +page_ref_inc (page); +return true; +} +static inline void put_page (struct page *page) { page =compound_head (page);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 18/28 ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
In reply to Greg Kroah-Hartman[ Upstream commit 60ce2858514ed9ccaf00dc7e9f4dc219537e9855 ]
Commit 06a4b6d009a1 ("ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M") fixed an issue in the layout of the header of the compressed kernel image that was caused by the assembler emitting narrow opcodes for 'mov r0, r0', and for this reason, the mnemonic was updated to use the W() macro, which will append the .w suffix (which forces a wide encoding) if required, i.e., when building the kernel in Thumb2 mode.
However, this failed to take into account that on Thumb2 kernels built for CPUs that are also ARM capable, the entry point is entered in ARM mode, and so the instructions emitted here will be ARM instructions that only exist in a wide encoding to begin with, which is why the assembler rejects the .w suffix here and aborts the build with the following message:
head.S: Assembler messages:
head.S:132: Error: width suffixes are invalid in ARM mode -- `mov.w r0,r0'
So replace the W(mov) with separate ARM and Thumb2 instructions, where the latter will only be used for THUMB2_ONLY builds.
--- arch/arm/boot/compressed/efi-header.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/compressed/efi-header.S +2 -1
@@ -17,7 +17,8 @@ @ there. .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000 #else - W(mov) r0, r0 + AR_CLASS( mov r0, r0 ) + M_CLASS( nop.w ) #endif .endm
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 19/28 genirq: Prevent use-after-free and work list corruption
In reply to Greg Kroah-Hartman[ Upstream commit 59c39840f5abf4a71e1810a8da71aaccd6c17d26 ]
When irq_set_affinity_notifier() replaces the notifier, then the reference count on the old notifier is dropped which causes it to be freed. But nothing ensures that the old notifier is not longer queued in the work list. If it is queued this results in a use after free and possibly in work list corruption.
Ensure that the work is canceled before the reference is dropped.
--- kernel/irq/manage.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/irq/manage.c +3 -1
@@ -332,8 +332,10 @@ irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify) desc->affinity_notify = notify;raw_spin_unlock_irqrestore (&desc->lock, flags); -if (old_notify) +if (old_notify) { +cancel_work_sync (&old_notify->work);kref_put (&old_notify->kref, old_notify->release); + }return 0 ; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 20/28 usb: dwc3: Fix default lpm_nyet_threshold value
In reply to Greg Kroah-HartmanFrom: Thinh Nguyen <[email protected]>
commit 8d791929b2fbdf7734c1596d808e55cb457f4562 upstream.
The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change the default value to 15.
--- drivers/usb/dwc3/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc3/core.c +1 -1
@@ -991,7 +991,7 @@ static int dwc3_probe(struct platform_de dwc->regs_size =resource_size (res);/* default to highest possible threshold */ - lpm_nyet_threshold =0xff ; + lpm_nyet_threshold =0xf ;/* default to -3.5dB de-emphasis */ tx_de_emphasis =1 ;
Greg Kroah-Hartman
maintainerPATCH 21/28 USB: serial: f81232: fix interrupt worker not stop
In reply to Greg Kroah-HartmanFrom: Ji-Ze Hong (Peter Hong) <[email protected]>
commit 804dbee1e49774918339c1e5a87400988c0819e8 upstream.
The F81232 will use interrupt worker to handle MSR change. This patch will fix the issue that interrupt work should stop in close() and suspend().
This also fixes line-status events being disabled after a suspend cycle until the port is re-opened.
--- drivers/usb/serial/f81232.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
drivers/usb/serial/f81232.c +39 -0
@@ -560,9 +560,12 @@ static int f81232_open(struct tty_structstatic void f81232_close (struct usb_serial_port *port) { +struct f81232_private *port_priv =usb_get_serial_port_data (port); +f81232_port_disable (port);usb_serial_generic_close (port);usb_kill_urb (port->interrupt_in_urb); +flush_work (&port_priv->interrupt_work); }static void f81232_dtr_rts (struct usb_serial_port *port,int on)
@@ -656,6 +659,40 @@ static int f81232_port_remove(struct usbreturn 0 ; } +static int f81232_suspend (struct usb_serial *serial,pm_message_t message) +{ +struct usb_serial_port *port = serial->port[0 ]; +struct f81232_private *port_priv =usb_get_serial_port_data (port); +int i; + +for (i =0 ; i <ARRAY_SIZE (port->read_urbs); ++i) +usb_kill_urb (port->read_urbs[i]); + +usb_kill_urb (port->interrupt_in_urb); + +if (port_priv) +flush_work (&port_priv->interrupt_work); + +return 0 ; +} + +static int f81232_resume (struct usb_serial *serial) +{ +struct usb_serial_port *port = serial->port[0 ]; +int result; + +if (tty_port_initialized (&port->port)) { + result =usb_submit_urb (port->interrupt_in_urb,GFP_NOIO ); +if (result) { +dev_err (&port->dev,"submit interrupt urb failed: %d\n" , + result); +return result; + } + } + +return usb_serial_generic_resume (serial); +} +static struct usb_serial_driver f81232_device = { .driver = { .owner =THIS_MODULE ,
@@ -679,6 +716,8 @@ static struct usb_serial_driver f81232_d .read_int_callback = f81232_read_int_callback, .port_probe = f81232_port_probe, .port_remove = f81232_port_remove, + .suspend = f81232_suspend, + .resume = f81232_resume, };static struct usb_serial_driver *const serial_drivers[] = {
Greg Kroah-Hartman
maintainerPATCH 22/28 usb-storage: Set virt_boundary_mask to avoid SG overflows
In reply to Greg Kroah-HartmanFrom: Alan Stern <[email protected]>
commit 747668dbc061b3e62bc1982767a3a1f9815fcf0e upstream.
The USB subsystem has always had an unusual requirement for its scatter-gather transfers: Each element in the scatterlist (except the last one) must have a length divisible by the bulk maxpacket size. This is a particular issue for USB mass storage, which uses SG lists created by the block layer rather than setting up its own.
So far we have scraped by okay because most devices have a logical block size of 512 bytes or larger, and the bulk maxpacket sizes for USB 2 and below are all <= 512. However, USB 3 has a bulk maxpacket size of 1024. Since the xhci-hcd driver includes native SG support, this hasn't mattered much. But now people are trying to use USB-3 mass storage devices with USBIP, and the vhci-hcd driver currently does not have full SG support.
The result is an overflow error, when the driver attempts to implement an SG transfer of 63 512-byte blocks as a single
3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks) transfers. The device instead sends 31 1024-byte packets followed by a 512-byte packet, and this overruns the first SG buffer.
Ideally this would be fixed by adding better SG support to vhci-hcd. But for now it appears we can work around the problem by asking the block layer to respect the maxpacket limitation, through the use of the virt_boundary_mask.
--- drivers/usb/storage/scsiglue.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-)
drivers/usb/storage/scsiglue.c +12 -14
@@ -81,6 +81,7 @@ static const char* host_info(struct Scsistatic int slave_alloc (struct scsi_device *sdev) {struct us_data *us =host_to_us (sdev->host); +int maxp;/* * Set the INQUIRY transfer length to 36. We don't use any of
@@ -90,20 +91,17 @@ static int slave_alloc (struct scsi_devi sdev->inquiry_len =36 ;/* -* USB has unusual DMA-alignment requirements: Although the -* starting address of each scatter-gather element doesn't matter, -* the length of each element except the last must be divisible -* by the Bulk maxpacket value. There's currently no way to -* express this by block-layer constraints, so we'll cop out -* and simply require addresses to be aligned at 512-byte -* boundaries. This is okay since most block I/O involves -* hardware sectors that are multiples of 512 bytes in length, -* and since host controllers up through USB 2.0 have maxpacket -* values no larger than 512. -* -* But it doesn't suffice for Wireless USB, where Bulk maxpacket -* values can be as large as 2048. To make that work properly -* will require changes to the block layer. +* USB has unusual scatter-gather requirements: the length of each +* scatterlist element except the last must be divisible by the +* Bulk maxpacket value. Fortunately this value is always a +* power of 2. Inform the block layer about this requirement. +*/ + maxp =usb_maxpacket (us->pusb_dev, us->recv_bulk_pipe,0 ); +blk_queue_virt_boundary (sdev->request_queue, maxp -1 ); + +/* +* Some host controllers may have alignment requirements. +* We'll play it safe by requiring 512-byte alignment always. */ blk_queue_update_dma_alignment (sdev->request_queue, (512 -1 ));
Greg Kroah-Hartman
maintainerPATCH 23/28 scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines
In reply to Greg Kroah-HartmanFrom: Andrew Vasquez <[email protected]>
commit 5cbdae10bf11f96e30b4d14de7b08c8b490e903c upstream.
Commit e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") incorrectly set 'optrom_region_size' to 'start+size', which can overflow option-rom boundaries when 'start' is non-zero. Continue setting optrom_region_size to the proper adjusted value of 'size'.
--- drivers/scsi/qla2xxx/qla_attr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +2 -2
@@ -345,7 +345,7 @@ qla2x00_sysfs_write_optrom_ctl(struct fi } ha->optrom_region_start = start; - ha->optrom_region_size = start + size; + ha->optrom_region_size = size; ha->optrom_state =QLA_SREADING ; ha->optrom_buffer =vmalloc (ha->optrom_region_size);
@@ -418,7 +418,7 @@ qla2x00_sysfs_write_optrom_ctl(struct fi } ha->optrom_region_start = start; - ha->optrom_region_size = start + size; + ha->optrom_region_size = size; ha->optrom_state =QLA_SWRITING ; ha->optrom_buffer =vmalloc (ha->optrom_region_size);
Greg Kroah-Hartman
maintainerPATCH 24/28 Bluetooth: hidp: fix buffer overflow
In reply to Greg Kroah-HartmanFrom: Young Xiao <[email protected]>
commit a1616a5ac99ede5d605047a9012481ce7ff18b16 upstream.
Struct ca is copied from userspace. It is not checked whether the "name" field is NULL terminated, which allows local users to obtain potentially sensitive information from kernel stack memory, via a HIDPCONNADD command.
This vulnerability is similar to CVE-2011-1079.
--- net/bluetooth/hidp/sock.c | 1 + 1 file changed, 1 insertion(+)
net/bluetooth/hidp/sock.c +1 -0
@@ -76,6 +76,7 @@ static int hidp_sock_ioctl(struct socketsockfd_put (csock);return err; } + ca.name[sizeof (ca.name)-1 ] =0 ; err =hidp_connection_add (&ca, csock, isock);if (!err &©_to_user (argp, &ca,sizeof (ca)))
Greg Kroah-Hartman
maintainerPATCH 25/28 Bluetooth: Align minimum encryption key size for LE and BR/EDR connections
In reply to Greg Kroah-HartmanFrom: Marcel Holtmann <[email protected]>
commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.
The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well.
--- include/net/bluetooth/hci_core.h | 3 +++ net/bluetooth/hci_conn.c | 8 ++++++++ 2 files changed, 11 insertions(+)
include/net/bluetooth/hci_core.h +3 -0
@@ -176,6 +176,9 @@ struct adv_info {#define HCI_MAX_SHORT_NAME_LENGTH 10 +/* Min encryption key size to match with SMP */ +#define HCI_MIN_ENC_KEY_SIZE 7 +/* Default LE RPA expiry time, 15 minutes */ #define HCI_DEFAULT_RPA_TIMEOUT (15 * 60)
net/bluetooth/hci_conn.c +8 -0
@@ -1165,6 +1165,14 @@ int hci_conn_check_link_mode(struct hci_ !test_bit(HCI_CONN_ENCRYPT, &conn->flags))return 0 ; +/* The minimum encryption key size needs to be enforced by the +* host stack before establishing any L2CAP connections. The +* specification in theory allows a minimum of 1, but to align +* BR/EDR and LE transports, a minimum of 7 is chosen. +*/ +if (conn->enc_key_size <HCI_MIN_ENC_KEY_SIZE ) +return 0 ; +return 1 ; }
Greg Kroah-Hartman
maintainerPATCH 26/28 UAS: fix alignment of scatter/gather segments
In reply to Greg Kroah-HartmanFrom: Oliver Neukum <[email protected]>
commit 3ae62a42090f1ed48e2313ed256a1182a85fb575 upstream.
This is the UAS version of
747668dbc061b3e62bc1982767a3a1f9815fcf0e
usb-storage: Set virt_boundary_mask to avoid SG overflows
We are not as likely to be vulnerable as storage, as it is unlikelier that UAS is run over a controller without native support for SG, but the issue exists.
The issue has been existing since the inception of the driver.
--- drivers/usb/storage/uas.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-)
drivers/usb/storage/uas.c +22 -13
@@ -796,24 +796,33 @@ static int uas_slave_alloc(struct scsi_d {struct uas_dev_info *devinfo = (struct uas_dev_info *)sdev->host->hostdata; +int maxp; sdev->hostdata = devinfo;/* -* USB has unusual DMA-alignment requirements: Although the -* starting address of each scatter-gather element doesn't matter, -* the length of each element except the last must be divisible -* by the Bulk maxpacket value. There's currently no way to -* express this by block-layer constraints, so we'll cop out -* and simply require addresses to be aligned at 512-byte -* boundaries. This is okay since most block I/O involves -* hardware sectors that are multiples of 512 bytes in length, -* and since host controllers up through USB 2.0 have maxpacket -* values no larger than 512. +* We have two requirements here. We must satisfy the requirements +* of the physical HC and the demands of the protocol, as we +* definitely want no additional memory allocation in this path +* ruling out using bounce buffers. * -* But it doesn't suffice for Wireless USB, where Bulk maxpacket -* values can be as large as 2048. To make that work properly -* will require changes to the block layer. +* For a transmission on USB to continue we must never send +* a package that is smaller than maxpacket. Hence the length of each +* scatterlist element except the last must be divisible by the +* Bulk maxpacket value. +* If the HC does not ensure that through SG, +* the upper layer must do that. We must assume nothing +* about the capabilities off the HC, so we use the most +* pessimistic requirement. +*/ + + maxp =usb_maxpacket (devinfo->udev, devinfo->data_in_pipe,0 ); +blk_queue_virt_boundary (sdev->request_queue, maxp -1 ); + +/* +* The protocol has no requirements on alignment in the strict sense. +* Controllers may or may not have alignment restrictions. +* As this is not exported, we use an extremely conservative guess. */ blk_queue_update_dma_alignment (sdev->request_queue, (512 -1 ));
Greg Kroah-Hartman
maintainerPATCH 27/28 ASoC: Intel: avoid Oops if DMA setup fails
In reply to Greg Kroah-HartmanFrom: Ross Zwisler <[email protected]>
commit 0efa3334d65b7f421ba12382dfa58f6ff5bf83c4 upstream.
Currently in sst_dsp_new() if we get an error return from sst_dma_new() we just print an error message and then still complete the function successfully. This means that we are trying to run without sst->dma properly set up, which will result in NULL pointer dereference when sst->dma is later used. This was happening for me in sst_dsp_dma_get_channel():
struct sst_dma *dma = dsp->dma;
...
dma->ch = dma_request_channel(mask, dma_chan_filter, dsp);This resulted in:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: sst_dsp_dma_get_channel+0x4f/0x125 [snd_soc_sst_firmware]
Fix this by adding proper error handling for the case where we fail to set up DMA.
This change only affects Haswell and Broadwell systems. Baytrail systems explicilty opt-out of DMA via sst->pdata->resindex_dma_base being set to -1.
--- sound/soc/intel/common/sst-firmware.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
sound/soc/intel/common/sst-firmware.c +6 -2
@@ -1252,11 +1252,15 @@ struct sst_dsp *sst_dsp_new(struct devic goto irq_err; err =sst_dma_new (sst); -if (err) -dev_warn (dev,"sst_dma_new failed %d\n" , err); +if (err) { +dev_err (dev,"sst_dma_new failed %d\n" , err); + goto dma_err; + }return sst; +dma_err: +free_irq (sst->irq, sst); irq_err:if (sst->ops->free) sst->ops->free (sst);
Greg Kroah-Hartman
maintainerPATCH 28/28 timer/debug: Change /proc/timer_stats from 0644 to 0600
In reply to Greg Kroah-HartmanFrom: Ben Hutchings <[email protected]>
The timer_stats facility should filter and translate PIDs if opened from a non-initial PID namespace, to avoid leaking information about the wider system. It should also not show kernel virtual addresses. Unfortunately it has now been removed upstream (as redundant) instead of being fixed.
For stable, fix the leak by restricting access to root only. A similar change was already made for the /proc/timer_list file.
--- kernel/time/timer_stats.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/time/timer_stats.c +1 -1
@@ -417,7 +417,7 @@ static int __init init_tstats_procfs(voi {struct proc_dir_entry *pe; - pe =proc_create ("timer_stats" ,0644 ,NULL , &tstats_fops); + pe =proc_create ("timer_stats" ,0600 ,NULL , &tstats_fops);if (!pe)return -ENOMEM ;return 0 ;
stable-rc/linux-4.9.y boot: 112 boots: 0 failed, 107 passed with 2 offline, 3 conflicts (v4.9.174-29-g50bbfeb1e2a3)
stable-rc/linux-4.9.y boot: 112 boots: 0 failed, 107 passed with 2 offline, 3 conflicts (v4.9.174-29-g50bbfeb1e2a3)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.174-29-g50bbfeb1e2a3/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.174-29-g50bbfeb1e2a3/
Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.174-29-g50bbfeb1e2a3
Git Commit: 50bbfeb1e2a357db99ff35681cfa95341b33103a
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 52 unique boards, 22 SoC families, 15 builds out of 197
Boot Regressions Detected:
arm:
omap2plus_defconfig:
gcc-8:
omap4-panda:
lab-baylibre: new failure (last pass: v4.9.174)arm64:
defconfig:
gcc-8:
meson-gxbb-p200:
lab-baylibre: new failure (last pass: v4.9.174)Offline Platforms:
arm:
multi_v7_defconfig:
gcc-8
stih410-b2120: 1 offline lab
tegra20-iris-512: 1 offline labConflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
arm:
omap2plus_defconfig:
omap4-panda:
lab-baylibre: FAIL (gcc-8)
lab-baylibre-seattle: PASS (gcc-8)
davinci_all_defconfig:
da850-lcdk:
lab-baylibre: PASS (gcc-8)
lab-baylibre-seattle: FAIL (gcc-8)
arm64:
defconfig:
meson-gxbb-p200:
lab-baylibre: FAIL (gcc-8)
lab-baylibre-seattle: PASS (gcc-8)
---
For more info write to <[email protected]>
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.175 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat 11 May 2019 06:11:12 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.175-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.9.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.175-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 50bbfeb1e2a357db99ff35681cfa95341b33103a
git describe: v4.9.174-29-g50bbfeb1e2a3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.174-29-g50bbfeb1e2a3
No regressions (compared to build v4.9.174)
No fixes (compared to build v4.9.174)
Ran 22312 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite
Signature · 2 lines
Linaro LKFT https://lkft.linaro.org
Jon Hunter
maintainerQuoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.175 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat 11 May 2019 06:11:12 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.175-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.9.y
and the diffstat can be found below.thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 failLinux version: 4.9.175-rc1-g50bbfeb
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
Signature · 1 line
nvpublic
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.175 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat 11 May 2019 06:11:12 PM UTC. Anything received after that time might be too late.
Build results:
total: 172 pass: 172 fail: 0 Qemu test results: total: 320 pass: 320 fail: 0
Guenter
Quoted 5 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.9.175 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Quoted 9 lines
Responses should be made by Sat 11 May 2019 06:11:12 PM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.175-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.9.y
and the diffstat can be found below.
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah