Skip to contentSkip to conversation

Block device naming

DISCUSSION Alibek A. 1 participant 2 messages May 9, 2019 – May 15, 2019

lore
Share & tools
lore

Alibek A.

author
#0 lore raw

Hi!

I want to address the following problem:
On the system with hot-attached new storage volume, such as FC-switch update configuration for connected FC-HBA on servers, linux kernel reorder block devices and change names of block devices. Becouse scsi-id, wwn-id and other is a symbol links to block device names than on change block device name change path to device. This causes the server to stop working.

For example, on server present ZFS pool with attached device by scsi-id

# zpool status
  pool: pool
 state: ONLINE
  scan: scrub repaired 0 in 1h39m with 0 errors on Sun Oct  8 02:03:34 2017
config:
    NAME                                      STATE     READ WRITE CKSUM
    pool                                      ONLINE       0     0     0
      scsi-3600144f0c7a5bc61000058d3b96d001d  ONLINE       0     0     0

Before export new block device from storage to hba, scsi-id have next path to device:
/dev/disk/by-id/scsi-3600144f0c7a5bc61000058d3b96d001d -> ../../sdd

When added new block device by FC-switch, FC-HBA kernel change block device names:
/dev/disk/by-id/scsi-3600144f0c7a5bc61000058d3b96d001d -> ../../sdf

and ZFS can't access to device until reboot (partprobe, zpool online -e pool scsi-3600144f0c7a5bc61000058d3b96d001d - may help or may not help)

Is there any way to fix or change this behavior of the kernel?

It may be more reasonable to immediately assign an unique persistent identifier of device and linking other identifiers with it?

With regards, Alibek!

#1 lore raw

Is there really no comment or suggestions how to avoid server failure when changing the LUN number?

Quoted 33 lines · Alibek A.

Hi!

I want to address the following problem:
On the system with hot-attached new storage volume, such as FC-switch update configuration for connected FC-HBA on servers, linux kernel reorder block devices and change names of block devices. Becouse scsi-id, wwn-id and other is a symbol links to block device names than on change block device name change path to device. This causes the server to stop working.

For example, on server present ZFS pool with attached device by scsi-id

# zpool status
  pool: pool
 state: ONLINE
  scan: scrub repaired 0 in 1h39m with 0 errors on Sun Oct  8 02:03:34 2017
config:
    NAME                                      STATE     READ WRITE CKSUM
    pool                                      ONLINE       0     0     0
      scsi-3600144f0c7a5bc61000058d3b96d001d  ONLINE       0     0     0

Before export new block device from storage to hba, scsi-id have next path to device:
/dev/disk/by-id/scsi-3600144f0c7a5bc61000058d3b96d001d -> ../../sdd

When added new block device by FC-switch, FC-HBA kernel change block device names:
/dev/disk/by-id/scsi-3600144f0c7a5bc61000058d3b96d001d -> ../../sdf

and ZFS can't access to device until reboot (partprobe, zpool online -e pool scsi-3600144f0c7a5bc61000058d3b96d001d - may help or may not help)

Is there any way to fix or change this behavior of the kernel?

It may be more reasonable to immediately assign an unique persistent identifier of device and linking other identifiers with it?

With regards, Alibek!