Buffer size for iio_push_to_buffers_with_timestamp()
Dear,
I have a question about the function iio_push_to_buffers_with_timestamp().
How kernel knows the size of the buffer ? Should the buffer always be 128 bits (with last 64 bits for timestamp) ?
Best regards,
Gaëtan.
Quoted 5 lines · On Thu, 9 May 2019 12:54:34 +0200 Gaëtan Carlier <[email protected]> wrote:
Dear,
I have a question about the function
iio_push_to_buffers_with_timestamp().How kernel knows the size of the buffer ? Should the buffer always be 128 bits (with last 64 bits for timestamp) ?
Hi Gaëtan,
All fields in IIO buffers are 'naturally' aligned and must be power of 2 size (8, 16, 32, 64)
This function is a bit 'odd' in that it needs a buffer that has space to insert the 64 bit aligned, 64 bit timestamp.
So if your devices other channels fit in 64 bits then your conclusion is correct. If you have more channels then it may well be that the buffer is already greater than 64 bits long before leaving space for the timestamp and hence your buffer may need to be 192, 256 etc..
Hope that answers your question,
Jonathan
Quoted 3 lines
Best regards,
Gaëtan.
Hi Jonathan,
Quoted 13 lines · Jonathan Cameron
Quoted 5 lines · On Thu, 9 May 2019 12:54:34 +0200 Gaëtan Carlier <[email protected]> wrote:
Dear,
I have a question about the function
iio_push_to_buffers_with_timestamp().How kernel knows the size of the buffer ? Should the buffer always be 128 bits (with last 64 bits for timestamp) ?
Hi Gaëtan,
All fields in IIO buffers are 'naturally' aligned and must be power of 2 size (8, 16, 32, 64)
Quoted 8 lines
This function is a bit 'odd' in that it needs a buffer that has space to insert the 64 bit aligned, 64 bit timestamp.
So if your devices other channels fit in 64 bits then your conclusion is correct. If you have more channels then it may well be that the buffer is already greater than 64 bits long before leaving space for the timestamp and hence your buffer may need to be 192, 256 etc..
Thank you for your reply.
Quoted 1 line
Hope that answers your question,
So, I still have a question. How IIO functions knows how many space is available because it handles "void *". Is the size of allocated buffer stored somewhere ?
Quoted 7 lines
Jonathan
Quoted 3 lines
Best regards,
Gaëtan.
Best regards,
Gaëtan.
Quoted 24 lines · On Sun, 12 May 2019 15:53:44 +0200 Gaëtan Carlier <[email protected]> wrote:
Hi Jonathan,
Quoted 13 lines · Jonathan Cameron
Quoted 5 lines · On Thu, 9 May 2019 12:54:34 +0200 Gaëtan Carlier <[email protected]> wrote:
Dear,
I have a question about the function
iio_push_to_buffers_with_timestamp().How kernel knows the size of the buffer ? Should the buffer always be 128 bits (with last 64 bits for timestamp) ?
Hi Gaëtan,
All fields in IIO buffers are 'naturally' aligned and must be power of 2 size (8, 16, 32, 64)
Quoted 8 lines
This function is a bit 'odd' in that it needs a buffer that has space to insert the 64 bit aligned, 64 bit timestamp.
So if your devices other channels fit in 64 bits then your conclusion is correct. If you have more channels then it may well be that the buffer is already greater than 64 bits long before leaving space for the timestamp and hence your buffer may need to be 192, 256 etc..
Quoted 5 lines
Thank you for your reply.
Quoted 1 line
Hope that answers your question,
So, I still have a question. How IIO functions knows how many space is available because it handles "void *". Is the size of allocated buffer stored somewhere ?
There is a cached value stored internally because the kfifo has to be reinitialized to handle the correct sized buffer (amongst other things) This is computed from the descriptions of the enabled channels.
See iio_compute_scan_bytes in drivers/iio/industrialio-buffer.c
Note a driver should always be able to work out it's own answer to that question. There are often more efficient ways of doing it in a driver as it knows that all channels are the same size for example.
Thanks,
Jonathan
Quoted 11 lines
Quoted 8 lines
Jonathan
Quoted 3 lines
Best regards,
Gaëtan.Best regards,
Gaëtan.