Skip to contentSkip to conversation

thermal: generic-adc: make lookup table optional

PATCH In review Jean-Francois Dagenais 2 participants 3 messages Apr 18, 2019 – May 11, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 thermal: generic-adc: make lookup table optional

Certain ADC channels, such as the xilinx-ams temperature channels, give milliCelcius already when read with iio_read_channel_processed.

Rather than having to provide a 1:1 dummy lookup table, simply allow to bypass the mechanism.

---
 drivers/thermal/thermal-generic-adc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/thermal/thermal-generic-adc.c +6 -3
index e22fc60ad36d..deb244f12de4 100644
@@ -29,6 +29,9 @@ static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
 	int temp, temp_hi, temp_lo, adc_hi, adc_lo;
 	int i;
 
+	if (!gti->lookup_table)
+		return val;
+
 	for (i = 0; i < gti->nlookup_table; i++) {
 		if (val >= gti->lookup_table[2 * i + 1])
 			break;
@@ -81,9 +84,9 @@ static int gadc_thermal_read_linear_lookup_table(struct device *dev,
 
 	ntable = of_property_count_elems_of_size(np, "temperature-lookup-table",
 						 sizeof(u32));
-	if (ntable < 0) {
-		dev_err(dev, "Lookup table is not provided\n");
-		return ntable;
+	if (ntable <= 0) {
+		dev_notice(dev, "no lookup table, assuming DAC channel returns milliCelcius\n");
+		return 0;
 	}
 
 	if (ntable % 2) {
Signature · 1 line
2.11.0
#1 lore raw

PATCH 2/2 dt-bindings: thermal: generic-adc: make lookup-table optional

---
 .../devicetree/bindings/thermal/thermal-generic-adc.txt        | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt +8 -2
index d72355502b78..691a09db2fef 100644
@@ -8,16 +8,22 @@ temperature using voltage-temperature lookup table.
 Required properties:
 ===================
 - compatible:		     Must be "generic-adc-thermal".
+- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
+		             of this property.
+Optional properties:
+===================
 - temperature-lookup-table:  Two dimensional array of Integer; lookup table
 			     to map the relation between ADC value and
 			     temperature. When ADC is read, the value is
 			     looked up on the table to get the equivalent
 			     temperature.
+
 			     The first value of the each row of array is the
 			     temperature in milliCelsius and second value of
 			     the each row of array is the ADC read value.
-- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
-			     of this property.
+
+			     If not specified, driver assumes the ADC channel
+			     gives milliCelsius directly.
 
 Example :
 #include <dt-bindings/thermal/thermal.h>
Signature · 1 line
2.11.0
#2 lore raw

Re: [PATCH 2/2] dt-bindings: thermal: generic-adc: make lookup-table optional

Hello,

On Thu, Apr 18, 2019 at 12:37:33PM -0400, Jean-Francois Dagenais wrote:

I added a description to this patch, but next time, on your next patches, describe your change. Description is not an optional field of a commit, it is very mandatory!

BR,

Quoted 34 lines
---
 .../devicetree/bindings/thermal/thermal-generic-adc.txt        | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt +8 -2
index d72355502b78..691a09db2fef 100644
@@ -8,16 +8,22 @@ temperature using voltage-temperature lookup table.
 Required properties:
 ===================
 - compatible:		     Must be "generic-adc-thermal".
+- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
+		             of this property.
+Optional properties:
+===================
 - temperature-lookup-table:  Two dimensional array of Integer; lookup table
 			     to map the relation between ADC value and
 			     temperature. When ADC is read, the value is
 			     looked up on the table to get the equivalent
 			     temperature.
+
 			     The first value of the each row of array is the
 			     temperature in milliCelsius and second value of
 			     the each row of array is the ADC read value.
-- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
-			     of this property.
+
+			     If not specified, driver assumes the ADC channel
+			     gives milliCelsius directly.
 
 Example :
 #include <dt-bindings/thermal/thermal.h>