net: meson: fixup g12a glue ephy id
Subsystems (4)
Jerome Brunet
reviewerPATCH 1/1 net: meson: fixup g12a glue ephy id
The phy id chosen by Amlogic is incorrectly set in the mdio mux and does not match the phy driver.
It was not detected before because DT forces the use the correct driver for the internal PHY.
Fixes 7090425104db ("net: phy: add amlogic g12a mdio mux support")
Reported-by Qi Duan <[email protected]>
Signed-off-by Jerome Brunet <[email protected]>
--- drivers/net/phy/mdio-mux-meson-g12a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/mdio-mux-meson-g12a.c +1 -1
@@ -33,7 +33,7 @@#define ETH_PLL_CTL7 0x60#define ETH_PHY_CNTL0 0x80 -#define EPHY_G12A_ID 0x33000180 +#define EPHY_G12A_ID 0x33010180#define ETH_PHY_CNTL1 0x84#define PHY_CNTL1_ST_MODE GENMASK(2, 0)#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
Signature · 1 line
2.20.1
From: Jerome Brunet <[email protected]>
Date: Sun, 12 May 2019 23:12:37 +0200
Quoted 9 lines
The phy id chosen by Amlogic is incorrectly set in the mdio mux and does not match the phy driver.
It was not detected before because DT forces the use the correct driver for the internal PHY.
Fixes 7090425104db ("net: phy: add amlogic g12a mdio mux support")Reported-by Qi Duan <[email protected]>Signed-off-by Jerome Brunet <[email protected]>
Applied.