x86: Always to to fill acpi_rsdp_addr in boot params
Subsystems (2)
v2 cover x86: Always to to fill acpi_rsdp_addr in boot params
This patch sync the behavior of user space kexec and kexec_file_load, they will both fill the boot_params.acpi_rsdp_addr with a valid RSDP value, to make sure second kernel can always get the RSDP consistently.
This will make it effortless to boot newer version of kernel (5.0+) without specifying acpi_rsdp= cmdline on EFI system even with EFI service disabled. Should not change any behavior with older kernels.
Update from V1:
- Split into multiple patches for a cleaner structure, content is not changed.
Kairui Song (4):
x86: Update boot parameters defination
x86: Introduce helpers for getting RSDP address
x86: Always try to fill acpi_rsdp_addr in boot params crashdump/x86: Use new introduce helper for getting RSDP
include/x86/x86-linux.h | 8 ++-- kexec/arch/i386/crashdump-x86.c | 34 +++++------------ kexec/arch/i386/kexec-x86-common.c | 60 ++++++++++++++++++++++++++++++ kexec/arch/i386/kexec-x86.h | 1 + kexec/arch/i386/x86-linux-setup.c | 6 ++- kexec/arch/i386/x86-linux-setup.h | 1 + 6 files changed, 80 insertions(+), 30 deletions(-)
Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
PATCH v2 1/4 x86: Update boot parameters defination
Since kernel commit e6e094e053af75 ("x86/acpi, x86/boot: Take RSDP address from boot params if available"), kernel accept a acpi_rsdp_addr param in boot_params. Sync the x86_linux_param_header to support this param.
--- include/x86/x86-linux.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
include/x86/x86-linux.h +5 -3
@@ -45,8 +45,7 @@ struct apm_bios_info {uint16_t cseg_len;/* 0x4e */ uint16_t cseg_16_len;/* 0x50 */ uint16_t dseg_len;/* 0x52 */ -uint8_t reserved[44 ];/* 0x54 */ -}; +} __attribute__((packed));/* * EDD stuff
@@ -113,12 +112,15 @@ struct x86_linux_param_header {uint8_t reserved4[2 ];/* 0x3e -- 0x3f reserved for future expansion */ struct apm_bios_info apm_bios_info;/* 0x40 */ +uint8_t reserved4_1[28 ];/* 0x54 */ +uint64_t acpi_rsdp_addr;/* 0x70 */ +uint8_t reserved4_2[8 ];/* 0x78 */ struct drive_info_struct drive_info;/* 0x80 */ struct sys_desc_table sys_desc_table;/* 0xa0 */ uint32_t ext_ramdisk_image;/* 0xc0 */ uint32_t ext_ramdisk_size;/* 0xc4 */ uint32_t ext_cmd_line_ptr;/* 0xc8 */ -uint8_t reserved4_1[0x1c0 -0xcc ];/* 0xe4 */ +uint8_t reserved4_3[0x1c0 -0xcc ];/* 0xe4 */ uint8_t efi_info[32 ];/* 0x1c0 */ uint32_t alt_mem_k;/* 0x1e0 */ uint8_t reserved5[4 ];/* 0x1e4 */
Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 1/4] x86: Update boot parameters defination
Hi Kairui
Quoted 14 lines · Kairui Song
Since kernel commit
e6e094e053af75("x86/acpi, x86/boot: Take RSDP address from boot params if available"), kernel accept aacpi_rsdp_addrparam inboot_params. Sync thex86_linux_param_headerto support this param.Signed-off-by Kairui Song <[email protected]>--- include/x86/x86-linux.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)include/x86/x86-linux.h +0
-0
include/x86/x86-linux.h struct apm_bios_info { · line 48
Quoted 6 lines
include/x86/x86-linux.h +1
-2@@ -45,8 +45,7 @@ struct apm_bios_info {uint16_t cseg_len;/* 0x4e */ uint16_t cseg_16_len;/* 0x50 */ uint16_t dseg_len;/* 0x52 */ -uint8_t reserved[44 ];/* 0x54 */ -}; +} __attribute__((packed));
It should be good to keep same as the kernel header without packed attribute.
is it possible to sync the latest mainline uapi bootparam header file, maybe after this series get solved?
Quoted 28 lines
include/x86/x86-linux.h +4
-1/* * EDD stuff @@ -113,12 +112,15 @@ struct x86_linux_param_header {uint8_t reserved4[2 ];/* 0x3e -- 0x3f reserved for future expansion */ struct apm_bios_info apm_bios_info;/* 0x40 */ +uint8_t reserved4_1[28 ];/* 0x54 */ +uint64_t acpi_rsdp_addr;/* 0x70 */ +uint8_t reserved4_2[8 ];/* 0x78 */ struct drive_info_struct drive_info;/* 0x80 */ struct sys_desc_table sys_desc_table;/* 0xa0 */ uint32_t ext_ramdisk_image;/* 0xc0 */ uint32_t ext_ramdisk_size;/* 0xc4 */ uint32_t ext_cmd_line_ptr;/* 0xc8 */ -uint8_t reserved4_1[0x1c0 -0xcc ];/* 0xe4 */ +uint8_t reserved4_3[0x1c0 -0xcc ];/* 0xe4 */ uint8_t efi_info[32 ];/* 0x1c0 */ uint32_t alt_mem_k;/* 0x1e0 */ uint8_t reserved5[4 ];/* 0x1e4 */ Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Thanks
Dave
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 1/4] x86: Update boot parameters defination
Quoted 27 lines · Dave Young
Hi Kairui
Quoted 14 lines · Kairui Song
Since kernel commit
e6e094e053af75("x86/acpi, x86/boot: Take RSDP address from boot params if available"), kernel accept aacpi_rsdp_addrparam inboot_params. Sync thex86_linux_param_headerto support this param.Signed-off-by Kairui Song <[email protected]>--- include/x86/x86-linux.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)include/x86/x86-linux.h +0
-0include/x86/x86-linux.h struct apm_bios_info { · line 48
Quoted 6 lines
include/x86/x86-linux.h +1
-2@@ -45,8 +45,7 @@ struct apm_bios_info {uint16_t cseg_len;/* 0x4e */ uint16_t cseg_16_len;/* 0x50 */ uint16_t dseg_len;/* 0x52 */ -uint8_t reserved[44 ];/* 0x54 */ -}; +} __attribute__((packed));It should be good to keep same as the kernel header without packed attribute.
Quoted 3 lines
is it possible to sync the latest mainline uapi bootparam header file, maybe after this series get solved?
Hi Dave,
I can remove the packed attr then, just ensure it won't break anything, a bit paranoid maybe...
About sync the whole structure, the problem is kexec tools' header structure is different so that will change a lot. Maybe could be discussed seperately.
Signature · 7 lines
Best Regards, Kairui Song _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 1/4] x86: Update boot parameters defination
Quoted 28 lines · Kairui Song
Quoted 27 lines · Dave Young
Hi Kairui
Quoted 14 lines · Kairui Song
Since kernel commit
e6e094e053af75("x86/acpi, x86/boot: Take RSDP address from boot params if available"), kernel accept aacpi_rsdp_addrparam inboot_params. Sync thex86_linux_param_headerto support this param.Signed-off-by Kairui Song <[email protected]>--- include/x86/x86-linux.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)include/x86/x86-linux.h +0
-0include/x86/x86-linux.h struct apm_bios_info { · line 48
Quoted 6 lines
include/x86/x86-linux.h +1
-2@@ -45,8 +45,7 @@ struct apm_bios_info {uint16_t cseg_len;/* 0x4e */ uint16_t cseg_16_len;/* 0x50 */ uint16_t dseg_len;/* 0x52 */ -uint8_t reserved[44 ];/* 0x54 */ -}; +} __attribute__((packed));It should be good to keep same as the kernel header without packed attribute.
Quoted 4 lines
Quoted 3 lines
is it possible to sync the latest mainline uapi bootparam header file, maybe after this series get solved?
Hi Kairui,
Quoted 8 lines
Hi Dave,
I can remove the packed attr then, just ensure it won't break anything, a bit paranoid maybe...
About sync the whole structure, the problem is kexec tools' header structure is different so that will change a lot. Maybe could be discussed seperately.
Yes, agreed, it is not necessary to do in this series.
Quoted 4 lines
Signature · 3 lines
-- Best Regards, Kairui Song
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
PATCH v2 2/4 x86: Introduce helpers for getting RSDP address
In reply to Kairui SongOn x86 RSDP is fundamental for booting the machine. When second kernel is incapable of parsing the RSDP address (eg. kexec next kernel on an EFI system with EFI service disabled), kexec should prepare the RSDP address for second kernel.
Introduce helpers for getting RSDP from multiple sources, including boot params, cmdline and EFI firmware.
For legacy BIOS interface, there is no better way to find the RSDP address rather than scanning the memory region and search for it, and this will always be done by the kernel as a fallback, so this is no need to try to get the RSDP address for that case.
--- kexec/arch/i386/kexec-x86-common.c | 60 ++++++++++++++++++++++++++++++ kexec/arch/i386/kexec-x86.h | 1 + kexec/arch/i386/x86-linux-setup.c | 3 +- kexec/arch/i386/x86-linux-setup.h | 1 + 4 files changed, 63 insertions(+), 2 deletions(-)
kexec/arch/i386/kexec-x86-common.c +60 -0
@@ -39,6 +39,7 @@#include "../../firmware_memmap.h" #include "../../crashdump.h" #include "kexec-x86.h" +#include "x86-linux-setup.h" #include "../../kexec-xen.h" /* Used below but not present in (older?) xenctrl.h */
@@ -392,4 +393,63 @@ int get_memory_ranges(struct memory_range **range, int *ranges,return ret; } +static uint64_t cmdline_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +char *tmp_cmdline, *rsdp_param; + tmp_cmdline =get_command_line (); + rsdp_param =strstr (tmp_cmdline,"acpi_rsdp=" ); + +if (rsdp_param) +sscanf (rsdp_param,"acpi_rsdp=%lx" , &acpi_rsdp); + +free (tmp_cmdline); +return acpi_rsdp; +} + +static uint64_t bootparam_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +off_t offset = offsetof(struct x86_linux_param_header , acpi_rsdp_addr); + +if (get_bootparam (&acpi_rsdp, offset,sizeof (acpi_rsdp))) +return 0 ; + +return acpi_rsdp; +} + +static uint64_t efi_get_acpi_rsdp (void ) { +FILE *fp; +char line[MAX_LINE ], *s; +uint64_t acpi_rsdp =0 ; + + fp =fopen ("/sys/firmware/efi/systab" ,"r" ); +if (!fp) +return acpi_rsdp; + +while (fgets (line,sizeof (line), fp) !=0 ) { +/* ACPI20= always goes before ACPI= */ +if ((strstr (line,"ACPI20=" )) || (strstr (line,"ACPI=" ))) { + s =strchr (line,'=' ) +1 ; +sscanf (s,"0x%lx" , &acpi_rsdp); +break ; + } + } +fclose (fp); + +return acpi_rsdp; +} + +uint64_t get_acpi_rsdp (void ) +{ +uint64_t acpi_rsdp =0 ; + + acpi_rsdp =cmdline_get_acpi_rsdp (); + +if (!acpi_rsdp) + acpi_rsdp =bootparam_get_acpi_rsdp (); + +if (!acpi_rsdp) + acpi_rsdp =efi_get_acpi_rsdp (); + +return acpi_rsdp; +}
kexec/arch/i386/kexec-x86.h +1 -0
@@ -86,4 +86,5 @@ int nbi_load(int argc, char **argv, const char *buf, off_t len,void nbi_usage (void );extern unsigned xen_e820_to_kexec_type (uint32_t type); +extern uint64_t get_acpi_rsdp (void );#endif /* KEXEC_X86_H */
kexec/arch/i386/x86-linux-setup.c +1 -2
@@ -123,7 +123,6 @@ void setup_linux_bootloader_parameters_high( cmdline_ptr[cmdline_len -1 ] ='\0' ; } -static int get_bootparam (void *buf,off_t offset,size_t size);static int setup_linux_vesafb (struct x86_linux_param_header *real_mode) {struct fb_fix_screeninfo fix;
@@ -452,7 +451,7 @@ char *find_mnt_by_fsname(char *fsname)return mntdir; } -static int get_bootparam (void *buf,off_t offset,size_t size) +int get_bootparam (void *buf,off_t offset,size_t size) {int data_file;char *debugfs_mnt, *sysfs_mnt;
kexec/arch/i386/x86-linux-setup.h +1 -0
@@ -21,6 +21,7 @@ static inline void setup_linux_bootloader_parameters( }void setup_linux_system_parameters (struct kexec_info *info,struct x86_linux_param_header *real_mode); +int get_bootparam (void *buf,off_t offset,size_t size);#define SETUP_BASE 0x90000
Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 2/4] x86: Introduce helpers for getting RSDP address
Quoted 34 lines · Kairui Song
On x86 RSDP is fundamental for booting the machine. When second kernel is incapable of parsing the RSDP address (eg. kexec next kernel on an EFI system with EFI service disabled), kexec should prepare the RSDP address for second kernel.
Introduce helpers for getting RSDP from multiple sources, including boot params, cmdline and EFI firmware.
For legacy BIOS interface, there is no better way to find the RSDP address rather than scanning the memory region and search for it, and this will always be done by the kernel as a fallback, so this is no need to try to get the RSDP address for that case.
Signed-off-by Kairui Song <[email protected]>--- kexec/arch/i386/kexec-x86-common.c | 60 ++++++++++++++++++++++++++++++ kexec/arch/i386/kexec-x86.h | 1 + kexec/arch/i386/x86-linux-setup.c | 3 +- kexec/arch/i386/x86-linux-setup.h | 1 + 4 files changed, 63 insertions(+), 2 deletions(-)kexec/arch/i386/kexec-x86-common.c +1
-0@@ -39,6 +39,7 @@#include "../../firmware_memmap.h" #include "../../crashdump.h" #include "kexec-x86.h" +#include "x86-linux-setup.h" #include "../../kexec-xen.h" /* Used below but not present in (older?) xenctrl.h */
kexec/arch/i386/kexec-x86-common.c int get_memory_ranges(struct memory_range **range, int *ranges, · line 401
Quoted 9 lines
kexec/arch/i386/kexec-x86-common.c +5
-0@@ -392,4 +393,63 @@ int get_memory_ranges(struct memory_range **range, int *ranges,return ret; } +static uint64_t cmdline_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +char *tmp_cmdline, *rsdp_param; + tmp_cmdline =get_command_line (); + rsdp_param =strstr (tmp_cmdline,"acpi_rsdp=" );
strstr will locate the first acpi_rsdp, what about multiple acpi_rsdp provided?
BTW, if one provide a wrong adress in acpi_rsdp= cmdline then it is not usable.
So not sure if adding this cmdline param is necessary, maybe only add efi case will be reliable.
Quoted 105 lines
kexec/arch/i386/kexec-x86-common.c +54
-0+ +if (rsdp_param) +sscanf (rsdp_param,"acpi_rsdp=%lx" , &acpi_rsdp); + +free (tmp_cmdline); +return acpi_rsdp; +} + +static uint64_t bootparam_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +off_t offset = offsetof(struct x86_linux_param_header , acpi_rsdp_addr); + +if (get_bootparam (&acpi_rsdp, offset,sizeof (acpi_rsdp))) +return 0 ; + +return acpi_rsdp; +} + +static uint64_t efi_get_acpi_rsdp (void ) { +FILE *fp; +char line[MAX_LINE ], *s; +uint64_t acpi_rsdp =0 ; + + fp =fopen ("/sys/firmware/efi/systab" ,"r" ); +if (!fp) +return acpi_rsdp; + +while (fgets (line,sizeof (line), fp) !=0 ) { +/* ACPI20= always goes before ACPI= */ +if ((strstr (line,"ACPI20=" )) || (strstr (line,"ACPI=" ))) { + s =strchr (line,'=' ) +1 ; +sscanf (s,"0x%lx" , &acpi_rsdp); +break ; + } + } +fclose (fp); + +return acpi_rsdp; +} + +uint64_t get_acpi_rsdp (void ) +{ +uint64_t acpi_rsdp =0 ; + + acpi_rsdp =cmdline_get_acpi_rsdp (); + +if (!acpi_rsdp) + acpi_rsdp =bootparam_get_acpi_rsdp (); + +if (!acpi_rsdp) + acpi_rsdp =efi_get_acpi_rsdp (); + +return acpi_rsdp; +}kexec/arch/i386/kexec-x86.h +1
-0@@ -86,4 +86,5 @@ int nbi_load(int argc, char **argv, const char *buf, off_t len,void nbi_usage (void );extern unsigned xen_e820_to_kexec_type (uint32_t type); +extern uint64_t get_acpi_rsdp (void );#endif /* KEXEC_X86_H */ kexec/arch/i386/x86-linux-setup.c +1
-2@@ -123,7 +123,6 @@ void setup_linux_bootloader_parameters_high( cmdline_ptr[cmdline_len -1 ] ='\0' ; } -static int get_bootparam (void *buf,off_t offset,size_t size);static int setup_linux_vesafb (struct x86_linux_param_header *real_mode) {struct fb_fix_screeninfo fix;@@ -452,7 +451,7 @@ char *find_mnt_by_fsname(char *fsname)return mntdir; } -static int get_bootparam (void *buf,off_t offset,size_t size) +int get_bootparam (void *buf,off_t offset,size_t size) {int data_file;char *debugfs_mnt, *sysfs_mnt;kexec/arch/i386/x86-linux-setup.h +1
-0@@ -21,6 +21,7 @@ static inline void setup_linux_bootloader_parameters( }void setup_linux_system_parameters (struct kexec_info *info,struct x86_linux_param_header *real_mode); +int get_bootparam (void *buf,off_t offset,size_t size);#define SETUP_BASE 0x90000Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 2/4] x86: Introduce helpers for getting RSDP address
Quoted 43 lines · Dave Young
Quoted 41 lines · Kairui Song
On x86 RSDP is fundamental for booting the machine. When second kernel is incapable of parsing the RSDP address (eg. kexec next kernel on an EFI system with EFI service disabled), kexec should prepare the RSDP address for second kernel.
Introduce helpers for getting RSDP from multiple sources, including boot params, cmdline and EFI firmware.
For legacy BIOS interface, there is no better way to find the RSDP address rather than scanning the memory region and search for it, and this will always be done by the kernel as a fallback, so this is no need to try to get the RSDP address for that case.
Signed-off-by Kairui Song <[email protected]>--- kexec/arch/i386/kexec-x86-common.c | 60 ++++++++++++++++++++++++++++++ kexec/arch/i386/kexec-x86.h | 1 + kexec/arch/i386/x86-linux-setup.c | 3 +- kexec/arch/i386/x86-linux-setup.h | 1 + 4 files changed, 63 insertions(+), 2 deletions(-)kexec/arch/i386/kexec-x86-common.c +4
-0@@ -39,6 +39,7 @@#include "../../firmware_memmap.h" #include "../../crashdump.h" #include "kexec-x86.h" +#include "x86-linux-setup.h" #include "../../kexec-xen.h" /* Used below but not present in (older?) xenctrl.h */ @@ -392,4 +393,63 @@ int get_memory_ranges(struct memory_range **range, int *ranges,return ret; } +static uint64_t cmdline_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +char *tmp_cmdline, *rsdp_param;
Quoted 5 lines
kexec/arch/i386/kexec-x86-common.c int get_memory_ranges(struct memory_range **range, int *ranges, · line 401
Quoted 2 lines
kexec/arch/i386/kexec-x86-common.c +2
-0+ tmp_cmdline =get_command_line (); + rsdp_param =strstr (tmp_cmdline,"acpi_rsdp=" );strstr will locate the first
acpi_rsdp, what about multipleacpi_rsdpprovided?
Good catch, should always use the latest acpi_rsdp provided, will fix that.
Quoted 4 lines
BTW, if one provide a wrong adress in acpi_rsdp= cmdline then it is not usable.
I think in that case kernel will not boot. If kexec is available then it means a right value is given.
Quoted 2 lines
So not sure if adding this cmdline param is necessary, maybe only add efi case will be reliable.
Adding the cmdline param ensure kexec boot loop won't fail. eg. in an older version kernel booted with kexec, and have EFI disabled, then cmdline is the only source for getting and storing the RSDP address.
Quoted 106 lines
Quoted 106 lines
kexec/arch/i386/kexec-x86-common.c +54
-0+ +if (rsdp_param) +sscanf (rsdp_param,"acpi_rsdp=%lx" , &acpi_rsdp); + +free (tmp_cmdline); +return acpi_rsdp; +} + +static uint64_t bootparam_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +off_t offset = offsetof(struct x86_linux_param_header , acpi_rsdp_addr); + +if (get_bootparam (&acpi_rsdp, offset,sizeof (acpi_rsdp))) +return 0 ; + +return acpi_rsdp; +} + +static uint64_t efi_get_acpi_rsdp (void ) { +FILE *fp; +char line[MAX_LINE ], *s; +uint64_t acpi_rsdp =0 ; + + fp =fopen ("/sys/firmware/efi/systab" ,"r" ); +if (!fp) +return acpi_rsdp; + +while (fgets (line,sizeof (line), fp) !=0 ) { +/* ACPI20= always goes before ACPI= */ +if ((strstr (line,"ACPI20=" )) || (strstr (line,"ACPI=" ))) { + s =strchr (line,'=' ) +1 ; +sscanf (s,"0x%lx" , &acpi_rsdp); +break ; + } + } +fclose (fp); + +return acpi_rsdp; +} + +uint64_t get_acpi_rsdp (void ) +{ +uint64_t acpi_rsdp =0 ; + + acpi_rsdp =cmdline_get_acpi_rsdp (); + +if (!acpi_rsdp) + acpi_rsdp =bootparam_get_acpi_rsdp (); + +if (!acpi_rsdp) + acpi_rsdp =efi_get_acpi_rsdp (); + +return acpi_rsdp; +}kexec/arch/i386/kexec-x86.h +1
-0@@ -86,4 +86,5 @@ int nbi_load(int argc, char **argv, const char *buf, off_t len,void nbi_usage (void );that extern unsigned xen_e820_to_kexec_type(uint32_t type); +extern uint64_t get_acpi_rsdp (void );#endif /* KEXEC_X86_H */ kexec/arch/i386/x86-linux-setup.c +1
-2@@ -123,7 +123,6 @@ void setup_linux_bootloader_parameters_high( cmdline_ptr[cmdline_len -1 ] ='\0' ; } -static int get_bootparam (void *buf,off_t offset,size_t size);static int setup_linux_vesafb (struct x86_linux_param_header *real_mode) {struct fb_fix_screeninfo fix;@@ -452,7 +451,7 @@ char *find_mnt_by_fsname(char *fsname)return mntdir; } -static int get_bootparam (void *buf,off_t offset,size_t size) +int get_bootparam (void *buf,off_t offset,size_t size) {int data_file;char *debugfs_mnt, *sysfs_mnt;kexec/arch/i386/x86-linux-setup.h +1
-1@@ -21,6 +21,7 @@ static inline void setup_linux_bootloader_parameters( }void setup_linux_system_parameters (struct kexec_info *info,struct x86_linux_param_header *real_mode); +int get_bootparam (void *buf,off_t offset,size_t size);#define SETUP_BASE 0x90000 --2.20.1
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Signature · 7 lines
Best Regards, Kairui Song _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 2/4] x86: Introduce helpers for getting RSDP address
Quoted 54 lines · Kairui Song
Quoted 43 lines · Dave Young
Quoted 41 lines · Kairui Song
On x86 RSDP is fundamental for booting the machine. When second kernel is incapable of parsing the RSDP address (eg. kexec next kernel on an EFI system with EFI service disabled), kexec should prepare the RSDP address for second kernel.
Introduce helpers for getting RSDP from multiple sources, including boot params, cmdline and EFI firmware.
For legacy BIOS interface, there is no better way to find the RSDP address rather than scanning the memory region and search for it, and this will always be done by the kernel as a fallback, so this is no need to try to get the RSDP address for that case.
Signed-off-by Kairui Song <[email protected]>--- kexec/arch/i386/kexec-x86-common.c | 60 ++++++++++++++++++++++++++++++ kexec/arch/i386/kexec-x86.h | 1 + kexec/arch/i386/x86-linux-setup.c | 3 +- kexec/arch/i386/x86-linux-setup.h | 1 + 4 files changed, 63 insertions(+), 2 deletions(-)kexec/arch/i386/kexec-x86-common.c +4
-0@@ -39,6 +39,7 @@#include "../../firmware_memmap.h" #include "../../crashdump.h" #include "kexec-x86.h" +#include "x86-linux-setup.h" #include "../../kexec-xen.h" /* Used below but not present in (older?) xenctrl.h */ @@ -392,4 +393,63 @@ int get_memory_ranges(struct memory_range **range, int *ranges,return ret; } +static uint64_t cmdline_get_acpi_rsdp (void ) { +uint64_t acpi_rsdp =0 ; +char *tmp_cmdline, *rsdp_param;Quoted 5 lines
kexec/arch/i386/kexec-x86-common.c int get_memory_ranges(struct memory_range **range, int *ranges, · line 401
Quoted 2 lines
kexec/arch/i386/kexec-x86-common.c +2
-0+ tmp_cmdline =get_command_line (); + rsdp_param =strstr (tmp_cmdline,"acpi_rsdp=" );strstr will locate the first
acpi_rsdp, what about multipleacpi_rsdpprovided?Good catch, should always use the latest
acpi_rsdpprovided, will fix that.Quoted 1 line
Quoted 7 lines
Quoted 3 lines
BTW, if one provide a wrong adress in acpi_rsdp= cmdline then it is not usable.
I think in that case kernel will not boot. If kexec is available then it means a right value is given.
After double check the kernel will boot even wrong acpi_rsdp is given, so I'll drop this part. boot_params in newer kernel will be enough to make sure kexec loop boot with EFI disabled won't fail.
Signature · 7 lines
Best Regards, Kairui Song _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
PATCH v2 3/4 x86: Always try to fill acpi_rsdp_addr in boot params
In reply to Kairui SongSince kernel commit e6e094e053af75 ("x86/acpi, x86/boot: Take RSDP address from boot params if available"), kernel accept an acpi_rsdp_addr param in boot_params. So fill in this parameter unconditionally, ensure second kernel always get the right RSDP address consistently, and boot well on EFI system even with EFI service disabled. User no longer need to change the kernel cmdline to workaround the missing RSDP issue.
For older version of kernels (Before 5.0), there won't be any change of behavior.
--- kexec/arch/i386/x86-linux-setup.c | 3 +++ 1 file changed, 3 insertions(+)
kexec/arch/i386/x86-linux-setup.c +3 -0
@@ -901,4 +901,7 @@ void setup_linux_system_parameters(struct kexec_info *info,/* fill the EDD information */ setup_edd_info (real_mode); + +/* Always try to fill acpi_rsdp_addr */ + real_mode->acpi_rsdp_addr =get_acpi_rsdp (); }
Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH v2 3/4] x86: Always try to fill acpi_rsdp_addr in boot params
Quoted 35 lines · Kairui Song
Since kernel commit
e6e094e053af75("x86/acpi, x86/boot: Take RSDP address from boot params if available"), kernel accept anacpi_rsdp_addrparam inboot_params. So fill in this parameter unconditionally, ensure second kernel always get the right RSDP address consistently, and boot well on EFI system even with EFI service disabled. User no longer need to change the kernel cmdline to workaround the missing RSDP issue.For older version of kernels (Before 5.0), there won't be any change of behavior.
Signed-off-by Kairui Song <[email protected]>--- kexec/arch/i386/x86-linux-setup.c | 3 +++ 1 file changed, 3 insertions(+)kexec/arch/i386/x86-linux-setup.c +3
-0@@ -901,4 +901,7 @@ void setup_linux_system_parameters(struct kexec_info *info,/* fill the EDD information */ setup_edd_info (real_mode); + +/* Always try to fill acpi_rsdp_addr */ + real_mode->acpi_rsdp_addr =get_acpi_rsdp (); }Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Seems no better way to check old kernel, then go with this way looks acceptable.
Thanks
Dave
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
PATCH v2 4/4 crashdump/x86: Use new introduced helper for getting RSDP
In reply to Kairui SongUse the new introduced helper for getting RSDP, this ensures RSDP is always accessible and avoid code duplication.
--- kexec/arch/i386/crashdump-x86.c | 34 +++++++++------------------------ 1 file changed, 9 insertions(+), 25 deletions(-)
kexec/arch/i386/crashdump-x86.c +9 -25
@@ -787,35 +787,19 @@ static int sysfs_efi_runtime_map_exist(void)/* Appends 'acpi_rsdp=' commandline for efi boot crash dump */ static void cmdline_add_efi (char *cmdline) { -FILE *fp; -int cmdlen, len; -char line[MAX_LINE ], *s; -const char *acpis =" acpi_rsdp=" ; +uint64_t acpi_rsdp; +char acpi_rsdp_buf[MAX_LINE ]; - fp =fopen ("/sys/firmware/efi/systab" ,"r" ); -if (!fp) -return ; + acpi_rsdp =get_acpi_rsdp (); -while (fgets (line,sizeof (line), fp) !=0 ) { -/* ACPI20= always goes before ACPI= */ -if ((strstr (line,"ACPI20=" )) || (strstr (line,"ACPI=" ))) { - line[strlen (line) -1 ] ='\0' ; - s =strchr (line,'=' ); - s +=1 ; - len =strlen (s) +strlen (acpis); - cmdlen =strlen (cmdline) + len; -if (cmdlen > (COMMAND_LINE_SIZE -1 )) -die ("Command line overflow\n" ); -strcat (cmdline, acpis); -strcat (cmdline, s); -dbgprintf ("Command line after adding efi\n" ); -dbgprintf ("%s\n" , cmdline); +if (!acpi_rsdp) +return ; -break ; - } - } +sprintf (acpi_rsdp_buf," acpi_rsdp=0x%lx" , acpi_rsdp); +if (strlen (cmdline) +strlen (acpi_rsdp_buf) > (COMMAND_LINE_SIZE -1 )) +die ("Command line overflow\n" ); -fclose (fp); +strcat (cmdline, acpi_rsdp_buf); } static void get_backup_area(struct kexec_info *info,
Signature · 7 lines
2.20.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec