Skip to contentSkip to conversation

kunit: introduce KUnit, the Linux kernel unit testing framework

PATCH Superseded Brendan Higgins 3 participants 29 messages May 14, 2019 – Jun 4, 2019

Subsystems (10)
Documentation VFS Kbuild Kselftest +6 more subsystems

v3 of 18 Superseded Latest is v18 →

lore
Share & tools
lore
#0 lore raw

v3 cover kunit: introduce KUnit, the Linux kernel unit testing framework

## TLDR

I mostly wanted to incorporate feedback I got over the last week and a half.

Biggest things to look out for:

- KUnit core now outputs results in TAP14.
- Heavily reworked tools/testing/kunit/kunit.py
- Changed how parsing works.
- Added testing.
- Greg, Logan, you might want to re-review this.
- Added documentation on how to use KUnit on non-UML kernels. You can see the docs rendered here[1].

There is still some discussion going on on the [PATCH v2 00/17] thread, but I wanted to get some of these updates out before they got too stale (and too difficult for me to keep track of). I hope no one minds.

## Background

This patch set proposes KUnit, a lightweight unit testing and mocking framework for the Linux kernel.

Unlike Autotest and kselftest, KUnit is a true unit testing framework; it does not require installing the kernel on a test machine or in a VM (however, KUnit still allows you to run tests on test machines or in VMs if you want) and does not require tests to be written in userspace running on a host kernel. Additionally, KUnit is fast: From invocation to completion KUnit can run several dozen tests in under a second. Currently, the entire KUnit test suite for KUnit runs in under a second from the initial invocation (build time excluded).

KUnit is heavily inspired by JUnit, Python's unittest.mock, and Googletest/Googlemock for C++. KUnit provides facilities for defining unit test cases, grouping related test cases into test suites, providing common infrastructure for running tests, mocking, spying, and much more.

## What's so special about unit testing?

A unit test is supposed to test a single unit of code in isolation, hence the name. There should be no dependencies outside the control of the test; this means no external dependencies, which makes tests orders of magnitudes faster. Likewise, since there are no external dependencies, there are no hoops to jump through to run the tests. Additionally, this makes unit tests deterministic: a failing unit test always indicates a problem. Finally, because unit tests necessarily have finer granularity, they are able to test all code paths easily solving the classic problem of difficulty in exercising error handling code.

## Is KUnit trying to replace other testing frameworks for the kernel?

No. Most existing tests for the Linux kernel are end-to-end tests, which have their place. A well tested system has lots of unit tests, a reasonable number of integration tests, and some end-to-end tests. KUnit is just trying to address the unit test space which is currently not being addressed.

## More information on KUnit

There is a bunch of documentation near the end of this patch set that describes how to use KUnit and best practices for writing unit tests. For convenience I am hosting the compiled docs here[2].

Additionally for convenience, I have applied these patches to a branch[3].
The repo may be cloned with:
git clone https://kunit.googlesource.com/linux
This patchset is on the kunit/rfc/v5.1/v3 branch.

## Changes Since Last Version

- Converted KUnit core to print test results in TAP14 format as suggested by Greg and Frank.
- Heavily reworked tools/testing/kunit/kunit.py
- Changed how parsing works.
- Added testing.
- Added documentation on how to use KUnit on non-UML kernels. You can see the docs rendered here[1].
- Added a new set of EXPECTs and ASSERTs for pointer comparison.
- Removed more function indirection as suggested by Logan.
- Added a new patch that adds kunit_try_catch_throw to objtool's noreturn list.
- Fixed a number of minorish issues pointed out by Shuah, Masahiro, and kbuild bot.

[1] https://google.github.io/kunit-docs/third_party/kernel/docs/usage.html#kunit-on-non-uml-architectures
[2] https://google.github.io/kunit-docs/third_party/kernel/docs/
[3] https://kunit.googlesource.com/linux/+/kunit/rfc/v5.1/v3

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#1 lore raw

PATCH v3 1/18 kunit: test: add KUnit test runner core

Add core facilities for defining unit tests; this provides a common way to define test cases, functions that execute code which is under test and determine whether the code under test behaves as expected; this also provides a way to group together related test cases in test suites (here we call them test_modules).

Just define test cases and how to execute them for now; setting expectations on code will be defined later.

---
Changes Since Last Revision:
- Converted KUnit core to print test results in TAP14 format.
- Removed unnecessary function indirection, as per Logan's comments.
- Removed unused header that was causing some build breakage, as per Masahiro's comments.

---
 include/kunit/test.h | 162 ++++++++++++++++++++++++++++++
 kunit/Kconfig        |  16 +++
 kunit/Makefile       |   1 +
 kunit/test.c         | 229 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 408 insertions(+)
 create mode 100644 include/kunit/test.h
 create mode 100644 kunit/Kconfig
 create mode 100644 kunit/Makefile
 create mode 100644 kunit/test.c
include/kunit/test.h new file +162 -0
new file mode 100644
index 0000000000000..e682ea0e1f9a5
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Base unit test (KUnit) API.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_TEST_H
+#define _KUNIT_TEST_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+
+struct kunit;
+
+/**
+ * struct kunit_case - represents an individual test case.
+ * @run_case: the function representing the actual test case.
+ * @name: the name of the test case.
+ *
+ * A test case is a function with the signature, ``void (*)(struct kunit *)``
+ * that makes expectations (see KUNIT_EXPECT_TRUE()) about code under test. Each
+ * test case is associated with a &struct kunit_module and will be run after the
+ * module's init function and followed by the module's exit function.
+ *
+ * A test case should be static and should only be created with the KUNIT_CASE()
+ * macro; additionally, every array of test cases should be terminated with an
+ * empty test case.
+ *
+ * Example:
+ *
+ * .. code-block:: c
+ *
+ *	void add_test_basic(struct kunit *test)
+ *	{
+ *		KUNIT_EXPECT_EQ(test, 1, add(1, 0));
+ *		KUNIT_EXPECT_EQ(test, 2, add(1, 1));
+ *		KUNIT_EXPECT_EQ(test, 0, add(-1, 1));
+ *		KUNIT_EXPECT_EQ(test, INT_MAX, add(0, INT_MAX));
+ *		KUNIT_EXPECT_EQ(test, -1, add(INT_MAX, INT_MIN));
+ *	}
+ *
+ *	static struct kunit_case example_test_cases[] = {
+ *		KUNIT_CASE(add_test_basic),
+ *		{},
+ *	};
+ *
+ */
+struct kunit_case {
+	void (*run_case)(struct kunit *test);
+	const char name[256];
+
+	/* private: internal use only. */
+	bool success;
+};
+
+/**
+ * KUNIT_CASE - A helper for creating a &struct kunit_case
+ * @test_name: a reference to a test case function.
+ *
+ * Takes a symbol for a function representing a test case and creates a
+ * &struct kunit_case object from it. See the documentation for
+ * &struct kunit_case for an example on how to use it.
+ */
+#define KUNIT_CASE(test_name) { .run_case = test_name, .name = #test_name }
+
+/**
+ * struct kunit_module - describes a related collection of &struct kunit_case s.
+ * @name: the name of the test. Purely informational.
+ * @init: called before every test case.
+ * @exit: called after every test case.
+ * @test_cases: a null terminated array of test cases.
+ *
+ * A kunit_module is a collection of related &struct kunit_case s, such that
+ * @init is called before every test case and @exit is called after every test
+ * case, similar to the notion of a *test fixture* or a *test class* in other
+ * unit testing frameworks like JUnit or Googletest.
+ *
+ * Every &struct kunit_case must be associated with a kunit_module for KUnit to
+ * run it.
+ */
+struct kunit_module {
+	const char name[256];
+	int (*init)(struct kunit *test);
+	void (*exit)(struct kunit *test);
+	struct kunit_case *test_cases;
+};
+
+/**
+ * struct kunit - represents a running instance of a test.
+ * @priv: for user to store arbitrary data. Commonly used to pass data created
+ * in the init function (see &struct kunit_module).
+ *
+ * Used to store information about the current context under which the test is
+ * running. Most of this data is private and should only be accessed indirectly
+ * via public functions; the one exception is @priv which can be used by the
+ * test writer to store arbitrary data.
+ */
+struct kunit {
+	void *priv;
+
+	/* private: internal use only. */
+	const char *name; /* Read only after initialization! */
+	spinlock_t lock; /* Gaurds all mutable test state. */
+	bool success; /* Protected by lock. */
+};
+
+void kunit_init_test(struct kunit *test, const char *name);
+
+int kunit_run_tests(struct kunit_module *module);
+
+/**
+ * module_test() - used to register a &struct kunit_module with KUnit.
+ * @module: a statically allocated &struct kunit_module.
+ *
+ * Registers @module with the test framework. See &struct kunit_module for more
+ * information.
+ */
+#define module_test(module) \
+		static int module_kunit_init##module(void) \
+		{ \
+			return kunit_run_tests(&module); \
+		} \
+		late_initcall(module_kunit_init##module)
+
+void __printf(3, 4) kunit_printk(const char *level,
+				 const struct kunit *test,
+				 const char *fmt, ...);
+
+/**
+ * kunit_info() - Prints an INFO level message associated with the current test.
+ * @test: The test context object.
+ * @fmt: A printk() style format string.
+ *
+ * Prints an info level message associated with the test module being run. Takes
+ * a variable number of format parameters just like printk().
+ */
+#define kunit_info(test, fmt, ...) \
+		kunit_printk(KERN_INFO, test, fmt, ##__VA_ARGS__)
+
+/**
+ * kunit_warn() - Prints a WARN level message associated with the current test.
+ * @test: The test context object.
+ * @fmt: A printk() style format string.
+ *
+ * See kunit_info().
+ */
+#define kunit_warn(test, fmt, ...) \
+		kunit_printk(KERN_WARNING, test, fmt, ##__VA_ARGS__)
+
+/**
+ * kunit_err() - Prints an ERROR level message associated with the current test.
+ * @test: The test context object.
+ * @fmt: A printk() style format string.
+ *
+ * See kunit_info().
+ */
+#define kunit_err(test, fmt, ...) \
+		kunit_printk(KERN_ERR, test, fmt, ##__VA_ARGS__)
+
+#endif /* _KUNIT_TEST_H */
kunit/Kconfig new file +16 -0
new file mode 100644
index 0000000000000..64480092b2c24
@@ -0,0 +1,16 @@
+#
+# KUnit base configuration
+#
+
+menu "KUnit support"
+
+config KUNIT
+	bool "Enable support for unit tests (KUnit)"
+	help
+	  Enables support for kernel unit tests (KUnit), a lightweight unit
+	  testing and mocking framework for the Linux kernel. These tests are
+	  able to be run locally on a developer's workstation without a VM or
+	  special hardware. For more information, please see
+	  Documentation/kunit/
+
+endmenu
kunit/Makefile new file +1 -0
new file mode 100644
index 0000000000000..5efdc4dea2c08
@@ -0,0 +1 @@
+obj-$(CONFIG_KUNIT) +=			test.o
kunit/test.c new file +229 -0

229 lines not on this page · raw message

Signature · 6 lines
2.21.0.1020.gf2820cf01a-goog

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

PATCH v3 2/18 kunit: test: add test resource management API

In reply to Brendan Higgins

Create a common API for test managed resources like memory and test objects. A lot of times a test will want to set up infrastructure to be used in test cases; this could be anything from just wanting to allocate some memory to setting up a driver stack; this defines facilities for creating "test resources" which are managed by the test infrastructure and are automatically cleaned up at the conclusion of the test.

---
 include/kunit/test.h | 109 +++++++++++++++++++++++++++++++++++++++++++
 kunit/test.c         |  95 +++++++++++++++++++++++++++++++++++++
 2 files changed, 204 insertions(+)
include/kunit/test.h +109 -0
index e682ea0e1f9a5..5e86d88cd5305 100644
@@ -12,6 +12,69 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 
+struct kunit_resource;
+
+typedef int (*kunit_resource_init_t)(struct kunit_resource *, void *);
+typedef void (*kunit_resource_free_t)(struct kunit_resource *);
+
+/**
+ * struct kunit_resource - represents a *test managed resource*
+ * @allocation: for the user to store arbitrary data.
+ * @free: a user supplied function to free the resource. Populated by
+ * kunit_alloc_resource().
+ *
+ * Represents a *test managed resource*, a resource which will automatically be
+ * cleaned up at the end of a test case.
+ *
+ * Example:
+ *
+ * .. code-block:: c
+ *
+ *	struct kunit_kmalloc_params {
+ *		size_t size;
+ *		gfp_t gfp;
+ *	};
+ *
+ *	static int kunit_kmalloc_init(struct kunit_resource *res, void *context)
+ *	{
+ *		struct kunit_kmalloc_params *params = context;
+ *		res->allocation = kmalloc(params->size, params->gfp);
+ *
+ *		if (!res->allocation)
+ *			return -ENOMEM;
+ *
+ *		return 0;
+ *	}
+ *
+ *	static void kunit_kmalloc_free(struct kunit_resource *res)
+ *	{
+ *		kfree(res->allocation);
+ *	}
+ *
+ *	void *kunit_kmalloc(struct kunit *test, size_t size, gfp_t gfp)
+ *	{
+ *		struct kunit_kmalloc_params params;
+ *		struct kunit_resource *res;
+ *
+ *		params.size = size;
+ *		params.gfp = gfp;
+ *
+ *		res = kunit_alloc_resource(test, kunit_kmalloc_init,
+ *			kunit_kmalloc_free, &params);
+ *		if (res)
+ *			return res->allocation;
+ *		else
+ *			return NULL;
+ *	}
+ */
+struct kunit_resource {
+	void *allocation;
+	kunit_resource_free_t free;
+
+	/* private: internal use only. */
+	struct list_head node;
+};
+
 struct kunit;
 
 /**
@@ -104,6 +167,7 @@ struct kunit {
 	const char *name; /* Read only after initialization! */
 	spinlock_t lock; /* Gaurds all mutable test state. */
 	bool success; /* Protected by lock. */
+	struct list_head resources; /* Protected by lock. */
 };
 
 void kunit_init_test(struct kunit *test, const char *name);
@@ -124,6 +188,51 @@ int kunit_run_tests(struct kunit_module *module);
 		} \
 		late_initcall(module_kunit_init##module)
 
+/**
+ * kunit_alloc_resource() - Allocates a *test managed resource*.
+ * @test: The test context object.
+ * @init: a user supplied function to initialize the resource.
+ * @free: a user supplied function to free the resource.
+ * @context: for the user to pass in arbitrary data to the init function.
+ *
+ * Allocates a *test managed resource*, a resource which will automatically be
+ * cleaned up at the end of a test case. See &struct kunit_resource for an
+ * example.
+ */
+struct kunit_resource *kunit_alloc_resource(struct kunit *test,
+					    kunit_resource_init_t init,
+					    kunit_resource_free_t free,
+					    void *context);
+
+void kunit_free_resource(struct kunit *test, struct kunit_resource *res);
+
+/**
+ * kunit_kmalloc() - Like kmalloc() except the allocation is *test managed*.
+ * @test: The test context object.
+ * @size: The size in bytes of the desired memory.
+ * @gfp: flags passed to underlying kmalloc().
+ *
+ * Just like `kmalloc(...)`, except the allocation is managed by the test case
+ * and is automatically cleaned up after the test case concludes. See &struct
+ * kunit_resource for more information.
+ */
+void *kunit_kmalloc(struct kunit *test, size_t size, gfp_t gfp);
+
+/**
+ * kunit_kzalloc() - Just like kunit_kmalloc(), but zeroes the allocation.
+ * @test: The test context object.
+ * @size: The size in bytes of the desired memory.
+ * @gfp: flags passed to underlying kmalloc().
+ *
+ * See kzalloc() and kunit_kmalloc() for more information.
+ */
+static inline void *kunit_kzalloc(struct kunit *test, size_t size, gfp_t gfp)
+{
+	return kunit_kmalloc(test, size, gfp | __GFP_ZERO);
+}
+
+void kunit_cleanup(struct kunit *test);
+
 void __printf(3, 4) kunit_printk(const char *level,
 				 const struct kunit *test,
 				 const char *fmt, ...);
kunit/test.c +95 -0

119 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#3 lore raw

PATCH v3 3/18 kunit: test: add string_stream a std::stream like string builder

In reply to Brendan Higgins

A number of test features need to do pretty complicated string printing where it may not be possible to rely on a single preallocated string with parameters.

So provide a library for constructing the string as you go similar to C++'s std::string.

---
Changes Since Last Revision:
- Renamed struct instance with field of the same name, as per Shuah's comments.

---
 include/kunit/string-stream.h |  51 ++++++++++++
 kunit/Makefile                |   3 +-
 kunit/string-stream.c         | 143 ++++++++++++++++++++++++++++++++++
 3 files changed, 196 insertions(+), 1 deletion(-)
 create mode 100644 include/kunit/string-stream.h
 create mode 100644 kunit/string-stream.c
include/kunit/string-stream.h new file +51 -0
new file mode 100644
index 0000000000000..567a4629406da
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * C++ stream style string builder used in KUnit for building messages.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_STRING_STREAM_H
+#define _KUNIT_STRING_STREAM_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <stdarg.h>
+
+struct string_stream_fragment {
+	struct list_head node;
+	char *fragment;
+};
+
+struct string_stream {
+	size_t length;
+	struct list_head fragments;
+
+	/* length and fragments are protected by this lock */
+	spinlock_t lock;
+	struct kref refcount;
+};
+
+struct string_stream *new_string_stream(void);
+
+void destroy_string_stream(struct string_stream *stream);
+
+void string_stream_get(struct string_stream *stream);
+
+int string_stream_put(struct string_stream *stream);
+
+int string_stream_add(struct string_stream *this, const char *fmt, ...);
+
+int string_stream_vadd(struct string_stream *this,
+		       const char *fmt,
+		       va_list args);
+
+char *string_stream_get_string(struct string_stream *this);
+
+void string_stream_clear(struct string_stream *this);
+
+bool string_stream_is_empty(struct string_stream *this);
+
+#endif /* _KUNIT_STRING_STREAM_H */
kunit/Makefile +2 -1
index 5efdc4dea2c08..275b565a0e81f 100644
@@ -1 +1,2 @@
-obj-$(CONFIG_KUNIT) +=			test.o
+obj-$(CONFIG_KUNIT) +=			test.o \
+					string-stream.o
kunit/string-stream.c new file +143 -0

143 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#4 lore raw

PATCH v3 4/18 kunit: test: add kunit_stream a std::stream like logger

In reply to Brendan Higgins

A lot of the expectation and assertion infrastructure prints out fairly complicated test failure messages, so add a C++ style log library for for logging test results.

---
Changes Since Last Revision:
- Greg and Frank requested that KUnit prints out results in TAP format; the work to support this mostly happened in PATCH 01/18.
- kunit_stream_get_level was made static as suggested by kbuild bot.

---
 include/kunit/kunit-stream.h |  85 ++++++++++++++++++++
 include/kunit/test.h         |   3 +
 kunit/Makefile               |   3 +-
 kunit/kunit-stream.c         | 152 +++++++++++++++++++++++++++++++++++
 kunit/test.c                 |   7 ++
 5 files changed, 249 insertions(+), 1 deletion(-)
 create mode 100644 include/kunit/kunit-stream.h
 create mode 100644 kunit/kunit-stream.c
include/kunit/kunit-stream.h new file +85 -0
new file mode 100644
index 0000000000000..d457a54fe0100
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * C++ stream style string formatter and printer used in KUnit for outputting
+ * KUnit messages.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_KUNIT_STREAM_H
+#define _KUNIT_KUNIT_STREAM_H
+
+#include <linux/types.h>
+#include <kunit/string-stream.h>
+
+struct kunit;
+
+/**
+ * struct kunit_stream - a std::stream style string builder.
+ *
+ * A std::stream style string builder. Allows messages to be built up and
+ * printed all at once.
+ */
+struct kunit_stream {
+	/* private: internal use only. */
+	struct kunit *test;
+	spinlock_t lock; /* Guards level. */
+	const char *level;
+	struct string_stream *internal_stream;
+};
+
+/**
+ * kunit_new_stream() - constructs a new &struct kunit_stream.
+ * @test: The test context object.
+ *
+ * Constructs a new test managed &struct kunit_stream.
+ */
+struct kunit_stream *kunit_new_stream(struct kunit *test);
+
+/**
+ * kunit_stream_set_level(): sets the level that string should be printed at.
+ * @this: the stream being operated on.
+ * @level: the print level the stream is set to output to.
+ *
+ * Sets the print level at which the stream outputs.
+ */
+void kunit_stream_set_level(struct kunit_stream *this, const char *level);
+
+/**
+ * kunit_stream_add(): adds the formatted input to the internal buffer.
+ * @this: the stream being operated on.
+ * @fmt: printf style format string to append to stream.
+ *
+ * Appends the formatted string, @fmt, to the internal buffer.
+ */
+void __printf(2, 3) kunit_stream_add(struct kunit_stream *this,
+				     const char *fmt, ...);
+
+/**
+ * kunit_stream_append(): appends the contents of @other to @this.
+ * @this: the stream to which @other is appended.
+ * @other: the stream whose contents are appended to @this.
+ *
+ * Appends the contents of @other to @this.
+ */
+void kunit_stream_append(struct kunit_stream *this, struct kunit_stream *other);
+
+/**
+ * kunit_stream_commit(): prints out the internal buffer to the user.
+ * @this: the stream being operated on.
+ *
+ * Outputs the contents of the internal buffer as a kunit_printk formatted
+ * output.
+ */
+void kunit_stream_commit(struct kunit_stream *this);
+
+/**
+ * kunit_stream_clear(): clears the internal buffer.
+ * @this: the stream being operated on.
+ *
+ * Clears the contents of the internal buffer.
+ */
+void kunit_stream_clear(struct kunit_stream *this);
+
+#endif /* _KUNIT_KUNIT_STREAM_H */
include/kunit/test.h +3 -0
index 5e86d88cd5305..4bc839884a83c 100644
@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <kunit/kunit-stream.h>
 
 struct kunit_resource;
 
@@ -172,6 +173,8 @@ struct kunit {
 
 void kunit_init_test(struct kunit *test, const char *name);
 
+void kunit_fail(struct kunit *test, struct kunit_stream *stream);
+
 int kunit_run_tests(struct kunit_module *module);
 
 /**
kunit/Makefile +2 -1
index 275b565a0e81f..6ddc622ee6b1c 100644
@@ -1,2 +1,3 @@
 obj-$(CONFIG_KUNIT) +=			test.o \
-					string-stream.o
+					string-stream.o \
+					kunit-stream.o
kunit/kunit-stream.c new file +152 -0

152 lines not on this page · raw message

kunit/test.c +7 -0
index a15e6f8c41582..0bb6f53a7f87e 100644
@@ -138,6 +138,13 @@ static void kunit_print_test_case_ok_not_ok(struct kunit_case *test_case,
 			      test_case->name);
 }
 
+void kunit_fail(struct kunit *test, struct kunit_stream *stream)
+{
+	kunit_set_success(test, false);
+	kunit_stream_set_level(stream, KERN_ERR);
+	kunit_stream_commit(stream);
+}
+
 void kunit_init_test(struct kunit *test, const char *name)
 {
 	spin_lock_init(&test->lock);
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#5 lore raw

PATCH v3 5/18 kunit: test: add the concept of expectations

In reply to Brendan Higgins

Add support for expectations, which allow properties to be specified and then verified in tests.

---
Changes Since Last Revision:
- Added EXPECT macros for pointer comparison to address issue pointed out by kbuild bot.

---
 include/kunit/test.h | 518 +++++++++++++++++++++++++++++++++++++++++++
 kunit/test.c         |  66 ++++++
 2 files changed, 584 insertions(+)
include/kunit/test.h +518 -0
index 4bc839884a83c..86187ba069a5d 100644
@@ -271,4 +271,522 @@ void __printf(3, 4) kunit_printk(const char *level,
 #define kunit_err(test, fmt, ...) \
 		kunit_printk(KERN_ERR, test, fmt, ##__VA_ARGS__)
 
+static inline struct kunit_stream *kunit_expect_start(struct kunit *test,
+						      const char *file,
+						      const char *line)
+{
+	struct kunit_stream *stream = kunit_new_stream(test);
+
+	kunit_stream_add(stream, "EXPECTATION FAILED at %s:%s\n\t", file, line);
+
+	return stream;
+}
+
+static inline void kunit_expect_end(struct kunit *test,
+				    bool success,
+				    struct kunit_stream *stream)
+{
+	if (!success)
+		kunit_fail(test, stream);
+	else
+		kunit_stream_clear(stream);
+}
+
+#define KUNIT_EXPECT_START(test) \
+		kunit_expect_start(test, __FILE__, __stringify(__LINE__))
+
+#define KUNIT_EXPECT_END(test, success, stream) \
+		kunit_expect_end(test, success, stream)
+
+#define KUNIT_EXPECT_MSG(test, success, message, fmt, ...) do {		       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+									       \
+	kunit_stream_add(__stream, message);				       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+	KUNIT_EXPECT_END(test, success, __stream);			       \
+} while (0)
+
+#define KUNIT_EXPECT(test, success, message) do {			       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+									       \
+	kunit_stream_add(__stream, message);				       \
+	KUNIT_EXPECT_END(test, success, __stream);			       \
+} while (0)
+
+/**
+ * KUNIT_SUCCEED() - A no-op expectation. Only exists for code clarity.
+ * @test: The test context object.
+ *
+ * The opposite of KUNIT_FAIL(), it is an expectation that cannot fail. In other
+ * words, it does nothing and only exists for code clarity. See
+ * KUNIT_EXPECT_TRUE() for more information.
+ */
+#define KUNIT_SUCCEED(test) do {} while (0)
+
+/**
+ * KUNIT_FAIL() - Always causes a test to fail when evaluated.
+ * @test: The test context object.
+ * @fmt: an informational message to be printed when the assertion is made.
+ * @...: string format arguments.
+ *
+ * The opposite of KUNIT_SUCCEED(), it is an expectation that always fails. In
+ * other words, it always results in a failed expectation, and consequently
+ * always causes the test case to fail when evaluated. See KUNIT_EXPECT_TRUE()
+ * for more information.
+ */
+#define KUNIT_FAIL(test, fmt, ...) do {					       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+									       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+	KUNIT_EXPECT_END(test, false, __stream);			       \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_TRUE() - Causes a test failure when the expression is not true.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression. The test fails when this does
+ * not evaluate to true.
+ *
+ * This and expectations of the form `KUNIT_EXPECT_*` will cause the test case
+ * to fail when the specified condition is not met; however, it will not prevent
+ * the test case from continuing to run; this is otherwise known as an
+ * *expectation failure*.
+ */
+#define KUNIT_EXPECT_TRUE(test, condition)				       \
+		KUNIT_EXPECT(test, (condition),				       \
+		       "Expected " #condition " is true, but is false.\n")
+
+#define KUNIT_EXPECT_TRUE_MSG(test, condition, fmt, ...)		       \
+		KUNIT_EXPECT_MSG(test, (condition),			       \
+				"Expected " #condition " is true, but is false.\n",\
+				fmt, ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_FALSE() - Makes a test failure when the expression is not false.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression. The test fails when this does
+ * not evaluate to false.
+ *
+ * Sets an expectation that @condition evaluates to false. See
+ * KUNIT_EXPECT_TRUE() for more information.
+ */
+#define KUNIT_EXPECT_FALSE(test, condition)				       \
+		KUNIT_EXPECT(test, !(condition),			       \
+		       "Expected " #condition " is false, but is true.")
+
+#define KUNIT_EXPECT_FALSE_MSG(test, condition, fmt, ...)		       \
+		KUNIT_EXPECT_MSG(test, !(condition),			       \
+				"Expected " #condition " is false, but is true.\n",\
+				fmt, ##__VA_ARGS__)
+
+void kunit_expect_binary_msg(struct kunit *test,
+			     long long left, const char *left_name,
+			     long long right, const char *right_name,
+			     bool compare_result,
+			     const char *compare_name,
+			     const char *file,
+			     const char *line,
+			     const char *fmt, ...);
+
+static inline void kunit_expect_binary(struct kunit *test,
+				       long long left, const char *left_name,
+				       long long right, const char *right_name,
+				       bool compare_result,
+				       const char *compare_name,
+				       const char *file,
+				       const char *line)
+{
+	kunit_expect_binary_msg(test,
+				left, left_name,
+				right, right_name,
+				compare_result,
+				compare_name,
+				file,
+				line,
+				NULL);
+}
+
+void kunit_expect_ptr_binary_msg(struct kunit *test,
+				 void *left, const char *left_name,
+				 void *right, const char *right_name,
+				 bool compare_result,
+				 const char *compare_name,
+				 const char *file,
+				 const char *line,
+				 const char *fmt, ...);
+
+static inline void kunit_expect_ptr_binary(struct kunit *test,
+					   void *left, const char *left_name,
+					   void *right, const char *right_name,
+					   bool compare_result,
+					   const char *compare_name,
+					   const char *file,
+					   const char *line)
+{
+	kunit_expect_ptr_binary_msg(test,
+				    left, left_name,
+				    right, right_name,
+				    compare_result,
+				    compare_name,
+				    file,
+				    line,
+				    NULL);
+}
+
+/*
+ * A factory macro for defining the expectations for the basic comparisons
+ * defined for the built in types.
+ *
+ * Unfortunately, there is no common type that all types can be promoted to for
+ * which all the binary operators behave the same way as for the actual types
+ * (for example, there is no type that long long and unsigned long long can
+ * both be cast to where the comparison result is preserved for all values). So
+ * the best we can do is do the comparison in the original types and then coerce
+ * everything to long long for printing; this way, the comparison behaves
+ * correctly and the printed out value usually makes sense without
+ * interpretation, but can always be interpretted to figure out the actual
+ * value.
+ */
+#define KUNIT_EXPECT_BINARY(test, left, condition, right) do {		       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_expect_binary(test,					       \
+			    (long long) __left, #left,			       \
+			    (long long) __right, #right,		       \
+			    __left condition __right, #condition,	       \
+			    __FILE__, __stringify(__LINE__));		       \
+} while (0)
+
+#define KUNIT_EXPECT_BINARY_MSG(test, left, condition, right, fmt, ...) do {   \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_expect_binary_msg(test,					       \
+				(long long) __left, #left,		       \
+				(long long) __right, #right,		       \
+				__left condition __right, #condition,	       \
+				__FILE__, __stringify(__LINE__),	       \
+				fmt, ##__VA_ARGS__);			       \
+} while (0)
+
+/*
+ * Just like KUNIT_EXPECT_BINARY, but for comparing pointer types.
+ */
+#define KUNIT_EXPECT_PTR_BINARY(test, left, condition, right) do {	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_expect_ptr_binary(test,					       \
+			    (void *) __left, #left,			       \
+			    (void *) __right, #right,			       \
+			    __left condition __right, #condition,	       \
+			    __FILE__, __stringify(__LINE__));		       \
+} while (0)
+
+#define KUNIT_EXPECT_PTR_BINARY_MSG(test,				       \
+				    left,				       \
+				    condition,				       \
+				    right,				       \
+				    fmt,				       \
+				    ...) do {				       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_expect_ptr_binary_msg(test,				       \
+				    (void *) __left, #left,		       \
+				    (void *) __right, #right,		       \
+				    __left condition __right, #condition,      \
+				    __FILE__, __stringify(__LINE__),	       \
+				    fmt, ##__VA_ARGS__);		       \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_EQ() - Sets an expectation that @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) == (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_EQ(test, left, right) \
+		KUNIT_EXPECT_BINARY(test, left, ==, right)
+
+#define KUNIT_EXPECT_EQ_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_BINARY_MSG(test,				       \
+					left,				       \
+					==,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_PTR_EQ() - Expects that pointers @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a pointer.
+ * @right: an arbitrary expression that evaluates to a pointer.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) == (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_PTR_EQ(test, left, right) \
+		KUNIT_EXPECT_PTR_BINARY(test, left, ==, right)
+
+#define KUNIT_EXPECT_PTR_EQ_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_PTR_BINARY_MSG(test,			       \
+					    left,			       \
+					    ==,				       \
+					    right,			       \
+					    fmt,			       \
+					    ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_NE() - An expectation that @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are not
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) != (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_NE(test, left, right) \
+		KUNIT_EXPECT_BINARY(test, left, !=, right)
+
+#define KUNIT_EXPECT_NE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_BINARY_MSG(test,				       \
+					left,				       \
+					!=,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_PTR_NE() - Expects that pointers @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a pointer.
+ * @right: an arbitrary expression that evaluates to a pointer.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are not
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) != (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_PTR_NE(test, left, right) \
+		KUNIT_EXPECT_PTR_BINARY(test, left, !=, right)
+
+#define KUNIT_EXPECT_PTR_NE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_PTR_BINARY_MSG(test,			       \
+					    left,			       \
+					    !=,				       \
+					    right,			       \
+					    fmt,			       \
+					    ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_LT() - An expectation that @left is less than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is less than the
+ * value that @right evaluates to. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) < (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_LT(test, left, right) \
+		KUNIT_EXPECT_BINARY(test, left, <, right)
+
+#define KUNIT_EXPECT_LT_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_BINARY_MSG(test,				       \
+					left,				       \
+					<,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_LE() - Expects that @left is less than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is less than or
+ * equal to the value that @right evaluates to. Semantically this is equivalent
+ * to KUNIT_EXPECT_TRUE(@test, (@left) <= (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_LE(test, left, right) \
+		KUNIT_EXPECT_BINARY(test, left, <=, right)
+
+#define KUNIT_EXPECT_LE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_BINARY_MSG(test,				       \
+					left,				       \
+					<=,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_GT() - An expectation that @left is greater than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is greater than
+ * the value that @right evaluates to. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) > (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_GT(test, left, right) \
+		KUNIT_EXPECT_BINARY(test, left, >, right)
+
+#define KUNIT_EXPECT_GT_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_BINARY_MSG(test,				       \
+					left,				       \
+					>,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_GE() - Expects that @left is greater than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is greater than
+ * the value that @right evaluates to. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) >= (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_GE(test, left, right) \
+		KUNIT_EXPECT_BINARY(test, left, >=, right)
+
+#define KUNIT_EXPECT_GE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_EXPECT_BINARY_MSG(test,				       \
+					left,				       \
+					>=,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_STREQ() - Expects that strings @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, !strcmp((@left), (@right))). See KUNIT_EXPECT_TRUE()
+ * for more information.
+ */
+#define KUNIT_EXPECT_STREQ(test, left, right) do {			       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Expected " #left " == " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+									       \
+	KUNIT_EXPECT_END(test, !strcmp(left, right), __stream);		       \
+} while (0)
+
+#define KUNIT_EXPECT_STREQ_MSG(test, left, right, fmt, ...) do {	       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Expected " #left " == " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+									       \
+	KUNIT_EXPECT_END(test, !strcmp(left, right), __stream);		       \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_STRNEQ() - Expects that strings @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * not equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, strcmp((@left), (@right))). See KUNIT_EXPECT_TRUE()
+ * for more information.
+ */
+#define KUNIT_EXPECT_STRNEQ(test, left, right) do {			       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Expected " #left " != " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+									       \
+	KUNIT_EXPECT_END(test, strcmp(left, right), __stream);		       \
+} while (0)
+
+#define KUNIT_EXPECT_STRNEQ_MSG(test, left, right, fmt, ...) do {	       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Expected " #left " != " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+									       \
+	KUNIT_EXPECT_END(test, strcmp(left, right), __stream);		       \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_NOT_ERR_OR_NULL() - Expects that @ptr is not null and not err.
+ * @test: The test context object.
+ * @ptr: an arbitrary pointer.
+ *
+ * Sets an expectation that the value that @ptr evaluates to is not null and not
+ * an errno stored in a pointer. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, !IS_ERR_OR_NULL(@ptr)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_NOT_ERR_OR_NULL(test, ptr) do {			       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+	typeof(ptr) __ptr = (ptr);					       \
+									       \
+	if (!__ptr)							       \
+		kunit_stream_add(__stream,				       \
+			      "Expected " #ptr " is not null, but is.");       \
+	if (IS_ERR(__ptr))						       \
+		kunit_stream_add(__stream,				       \
+			      "Expected " #ptr " is not error, but is: %ld",   \
+			      PTR_ERR(__ptr));				       \
+									       \
+	KUNIT_EXPECT_END(test, !IS_ERR_OR_NULL(__ptr), __stream);	       \
+} while (0)
+
+#define KUNIT_EXPECT_NOT_ERR_OR_NULL_MSG(test, ptr, fmt, ...) do {	       \
+	struct kunit_stream *__stream = KUNIT_EXPECT_START(test);	       \
+	typeof(ptr) __ptr = (ptr);					       \
+									       \
+	if (!__ptr) {							       \
+		kunit_stream_add(__stream,				       \
+			      "Expected " #ptr " is not null, but is.");       \
+		kunit_stream_add(__stream, fmt, ##__VA_ARGS__);		       \
+	}								       \
+	if (IS_ERR(__ptr)) {						       \
+		kunit_stream_add(__stream,				       \
+			      "Expected " #ptr " is not error, but is: %ld",   \
+			      PTR_ERR(__ptr));				       \
+									       \
+		kunit_stream_add(__stream, fmt, ##__VA_ARGS__);		       \
+	}								       \
+	KUNIT_EXPECT_END(test, !IS_ERR_OR_NULL(__ptr), __stream);	       \
+} while (0)
+
 #endif /* _KUNIT_TEST_H */
kunit/test.c +66 -0

69 lines not on this page · raw message

Signature · 6 lines
2.21.0.1020.gf2820cf01a-goog

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#6 lore raw

PATCH v3 6/18 kbuild: enable building KUnit

In reply to Brendan Higgins

Add KUnit to root Kconfig and Makefile allowing it to actually be built.

---
Changes Since Last Revision:
- Masahiro reported a number of issues here on the previous revision; however, all of the changes actually needed to happen on earlier or later patches.

---
 Kconfig  | 2 ++
 Makefile | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)
Kconfig +2 -0
index 48a80beab6853..10428501edb78 100644
@@ -30,3 +30,5 @@ source "crypto/Kconfig"
 source "lib/Kconfig"
 
 source "lib/Kconfig.debug"
+
+source "kunit/Kconfig"
Makefile +1 -1
index 26c92f892d24b..2ea87a8fe770d 100644
@@ -969,7 +969,7 @@ endif
 PHONY += prepare0
 
 ifeq ($(KBUILD_EXTMOD),)
-core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
+core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/ kunit/
 
 vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#7 lore raw

PATCH v3 7/18 kunit: test: add initial tests

In reply to Brendan Higgins

Add a test for string stream along with a simpler example.

---
Changes Since Last Revision:
- Added more Kconfig help text for KUNIT_TEST and KUNIT_EXAMPLE_TEST as per Shuah's comments.

---
 kunit/Kconfig              | 25 ++++++++++-
 kunit/Makefile             |  4 ++
 kunit/example-test.c       | 88 ++++++++++++++++++++++++++++++++++++++
 kunit/string-stream-test.c | 60 ++++++++++++++++++++++++++
 4 files changed, 175 insertions(+), 2 deletions(-)
 create mode 100644 kunit/example-test.c
 create mode 100644 kunit/string-stream-test.c
kunit/Kconfig +23 -2
index 64480092b2c24..2052536cf9d3c 100644
@@ -10,7 +10,28 @@ config KUNIT
 	  Enables support for kernel unit tests (KUnit), a lightweight unit
 	  testing and mocking framework for the Linux kernel. These tests are
 	  able to be run locally on a developer's workstation without a VM or
-	  special hardware. For more information, please see
-	  Documentation/kunit/
+	  special hardware when using UML. Can also be used on most other
+	  architectures. For more information, please see Documentation/kunit/.
+
+config KUNIT_TEST
+	bool "KUnit test for KUnit"
+	depends on KUNIT
+	help
+	  Enables the unit tests for the KUnit test framework. These tests test
+	  the KUnit test framework itself; the tests are both written using
+	  KUnit and test KUnit. This option should only be enabled for testing
+	  purposes by developers interested in testing that KUnit works as
+	  expected.
+
+config KUNIT_EXAMPLE_TEST
+	bool "Example test for KUnit"
+	depends on KUNIT
+	help
+	  Enables an example unit test that illustrates some of the basic
+	  features of KUnit. This test only exists to help new users understand
+	  what KUnit is and how it is used. Please refer to the example test
+	  itself, kunit/example-test.c, for more information. This option is
+	  intended for curious hackers who would like to understand how to use
+	  KUnit for kernel development.
 
 endmenu
kunit/Makefile +4 -0
index 6ddc622ee6b1c..60a9ea6cb4697 100644
@@ -1,3 +1,7 @@
 obj-$(CONFIG_KUNIT) +=			test.o \
 					string-stream.o \
 					kunit-stream.o
+
+obj-$(CONFIG_KUNIT_TEST) +=		string-stream-test.o
+
+obj-$(CONFIG_KUNIT_EXAMPLE_TEST) +=	example-test.o
kunit/example-test.c new file +88 -0

88 lines not on this page · raw message

kunit/string-stream-test.c new file +60 -0

60 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#8 lore raw

PATCH v3 8/18 objtool: add kunit_try_catch_throw to the noreturn list

In reply to Brendan Higgins

This fixes the following warning seen on GCC 7.3:
kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

To: Josh Poimboeuf <[email protected]>
To: Peter Zijlstra <[email protected]>

---
 tools/objtool/check.c | 1 +
 1 file changed, 1 insertion(+)
tools/objtool/check.c +1 -0
index 479196aeb4096..be431d4557fe5 100644
@@ -166,6 +166,7 @@ static int __dead_end_function(struct objtool_file *file, struct symbol *func,
 		"usercopy_abort",
 		"machine_real_restart",
 		"rewind_stack_do_exit",
+		"kunit_try_catch_throw",
 	};
 
 	if (func->bind == STB_WEAK)
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
maintainer
#9 lore raw

Re: [PATCH v3 08/18] objtool: add kunit_try_catch_throw to the noreturn list

Quoted 3 lines · Brendan Higgins

This fixes the following warning seen on GCC 7.3:
kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

What is that file and function; no kernel tree near me seems to have that.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#10 lore raw

Re: [PATCH v3 08/18] objtool: add kunit_try_catch_throw to the noreturn list

Quoted 7 lines · Peter Zijlstra
Quoted 3 lines · Brendan Higgins

This fixes the following warning seen on GCC 7.3:
kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

What is that file and function; no kernel tree near me seems to have that.

Oh, sorry about that. The function is added in the following patch, "[PATCH v3 09/18] kunit: test: add support for test abort"[1].

My apologies if this patch is supposed to come after it in sequence, but I assumed it should come before otherwise objtool would complain about the symbol when it is introduced.

Thanks!

[1] https://lkml.org/lkml/2019/5/14/44
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

maintainer
#11 lore raw

Re: [PATCH v3 08/18] objtool: add kunit_try_catch_throw to the noreturn list

Quoted 9 lines · Brendan Higgins
Quoted 7 lines · Peter Zijlstra
Quoted 3 lines · Brendan Higgins

This fixes the following warning seen on GCC 7.3:
kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

What is that file and function; no kernel tree near me seems to have that.

Quoted 6 lines

Oh, sorry about that. The function is added in the following patch, "[PATCH v3 09/18] kunit: test: add support for test abort"[1].

My apologies if this patch is supposed to come after it in sequence, but I assumed it should come before otherwise objtool would complain about the symbol when it is introduced.

Or send me all patches such that I have context, or have a sane Changelog that gives me context. Just don't give me one patch with a crappy changelog.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#12 lore raw

Re: [PATCH v3 08/18] objtool: add kunit_try_catch_throw to the noreturn list

Quoted 13 lines · Peter Zijlstra
Quoted 12 lines · Brendan Higgins
Quoted 7 lines · Peter Zijlstra
Quoted 3 lines · Brendan Higgins

This fixes the following warning seen on GCC 7.3:
kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

What is that file and function; no kernel tree near me seems to have that.

Oh, sorry about that. The function is added in the following patch, "[PATCH v3 09/18] kunit: test: add support for test abort"[1].

Quoted 7 lines
Quoted 3 lines

My apologies if this patch is supposed to come after it in sequence, but I assumed it should come before otherwise objtool would complain about the symbol when it is introduced.

Or send me all patches such that I have context, or have a sane Changelog that gives me context. Just don't give me one patch with a crappy changelog.

I will provide more context in the next revision.

Sorry about that!

#13 lore raw

PATCH v3 9/18 kunit: test: add support for test abort

In reply to Brendan Higgins

Add support for aborting/bailing out of test cases, which is needed for implementing assertions.

An assertion is like an expectation, but bails out of the test case early if the assertion is not met. The idea with assertions is that you use them to state all the preconditions for your test. Logically speaking, these are the premises of the test case, so if a premise isn't true, there is no point in continuing the test case because there are no conclusions that can be drawn without the premises. Whereas, the expectation is the thing you are trying to prove.

---
Changes Since Last Revision:
- Removed unnecessary indirection as per Logan's comments.

---
 include/kunit/test.h      |  14 ++++
 include/kunit/try-catch.h |  69 +++++++++++++++++++
 kunit/Makefile            |   3 +-
 kunit/test.c              | 136 ++++++++++++++++++++++++++++++++++++--
 kunit/try-catch.c         |  95 ++++++++++++++++++++++++++
 5 files changed, 309 insertions(+), 8 deletions(-)
 create mode 100644 include/kunit/try-catch.h
 create mode 100644 kunit/try-catch.c
include/kunit/test.h +14 -0
index 86187ba069a5d..aff55b5610e7d 100644
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <kunit/kunit-stream.h>
+#include <kunit/try-catch.h>
 
 struct kunit_resource;
 
@@ -166,15 +167,28 @@ struct kunit {
 
 	/* private: internal use only. */
 	const char *name; /* Read only after initialization! */
+	struct kunit_try_catch try_catch;
 	spinlock_t lock; /* Gaurds all mutable test state. */
 	bool success; /* Protected by lock. */
+	bool death_test; /* Protected by lock. */
 	struct list_head resources; /* Protected by lock. */
 };
 
+static inline void kunit_set_death_test(struct kunit *test, bool death_test)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&test->lock, flags);
+	test->death_test = death_test;
+	spin_unlock_irqrestore(&test->lock, flags);
+}
+
 void kunit_init_test(struct kunit *test, const char *name);
 
 void kunit_fail(struct kunit *test, struct kunit_stream *stream);
 
+void kunit_abort(struct kunit *test);
+
 int kunit_run_tests(struct kunit_module *module);
 
 /**
include/kunit/try-catch.h new file +69 -0

69 lines not on this page · raw message

kunit/Makefile +2 -1
index 60a9ea6cb4697..1f7680cfa11ad 100644
@@ -1,6 +1,7 @@
 obj-$(CONFIG_KUNIT) +=			test.o \
 					string-stream.o \
-					kunit-stream.o
+					kunit-stream.o \
+					try-catch.o
 
 obj-$(CONFIG_KUNIT_TEST) +=		string-stream-test.o
 
kunit/test.c +129 -7

175 lines not on this page · raw message

kunit/try-catch.c new file +95 -0

95 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#14 lore raw

PATCH v3 10/18 kunit: test: add tests for kunit test abort

In reply to Brendan Higgins

Add KUnit tests for the KUnit test abort mechanism (see preceding commit). Add tests both for general try catch mechanism as well as non-architecture specific mechanism.

---
 kunit/Makefile    |   3 +-
 kunit/test-test.c | 101 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+), 1 deletion(-)
 create mode 100644 kunit/test-test.c
kunit/Makefile +2 -1
index 1f7680cfa11ad..533355867abd2 100644
@@ -3,6 +3,7 @@ obj-$(CONFIG_KUNIT) +=			test.o \
 					kunit-stream.o \
 					try-catch.o
 
-obj-$(CONFIG_KUNIT_TEST) +=		string-stream-test.o
+obj-$(CONFIG_KUNIT_TEST) +=		test-test.o \
+					string-stream-test.o
 
 obj-$(CONFIG_KUNIT_EXAMPLE_TEST) +=	example-test.o
kunit/test-test.c new file +101 -0

101 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#15 lore raw

PATCH v3 11/18 kunit: test: add the concept of assertions

In reply to Brendan Higgins

Add support for assertions which are like expectations except the test terminates if the assertion is not satisfied.

The idea with assertions is that you use them to state all the preconditions for your test. Logically speaking, these are the premises of the test case, so if a premise isn't true, there is no point in continuing the test case because there are no conclusions that can be drawn without the premises. Whereas, the expectation is the thing you are trying to prove. It is not used universally in x-unit style test frameworks, but I really like it as a convention. You could still express the idea of a premise using the above idiom, but I think KUNIT_ASSERT_* states the intended idea perfectly.

---
 include/kunit/test.h       | 498 ++++++++++++++++++++++++++++++++++++-
 kunit/string-stream-test.c |  12 +-
 kunit/test-test.c          |   2 +
 kunit/test.c               |  66 +++++
 4 files changed, 569 insertions(+), 9 deletions(-)
include/kunit/test.h +495 -3
index aff55b5610e7d..48e76c5c204b5 100644
@@ -85,9 +85,10 @@ struct kunit;
  * @name: the name of the test case.
  *
  * A test case is a function with the signature, ``void (*)(struct kunit *)``
- * that makes expectations (see KUNIT_EXPECT_TRUE()) about code under test. Each
- * test case is associated with a &struct kunit_module and will be run after the
- * module's init function and followed by the module's exit function.
+ * that makes expectations and assertions (see KUNIT_EXPECT_TRUE() and
+ * KUNIT_ASSERT_TRUE()) about code under test. Each test case is associated with
+ * a &struct kunit_module and will be run after the module's init function and
+ * followed by the module's exit function.
  *
  * A test case should be static and should only be created with the KUNIT_CASE()
  * macro; additionally, every array of test cases should be terminated with an
@@ -803,4 +804,495 @@ static inline void kunit_expect_ptr_binary(struct kunit *test,
 	KUNIT_EXPECT_END(test, !IS_ERR_OR_NULL(__ptr), __stream);	       \
 } while (0)
 
+static inline struct kunit_stream *kunit_assert_start(struct kunit *test,
+						      const char *file,
+						      const char *line)
+{
+	struct kunit_stream *stream = kunit_new_stream(test);
+
+	kunit_stream_add(stream, "ASSERTION FAILED at %s:%s\n\t", file, line);
+
+	return stream;
+}
+
+static inline void kunit_assert_end(struct kunit *test,
+				    bool success,
+				    struct kunit_stream *stream)
+{
+	if (!success) {
+		kunit_fail(test, stream);
+		kunit_abort(test);
+	} else {
+		kunit_stream_clear(stream);
+	}
+}
+
+#define KUNIT_ASSERT_START(test) \
+		kunit_assert_start(test, __FILE__, __stringify(__LINE__))
+
+#define KUNIT_ASSERT_END(test, success, stream) \
+		kunit_assert_end(test, success, stream)
+
+#define KUNIT_ASSERT(test, success, message) do {			       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+									       \
+	kunit_stream_add(__stream, message);				       \
+	KUNIT_ASSERT_END(test, success, __stream);			       \
+} while (0)
+
+#define KUNIT_ASSERT_MSG(test, success, message, fmt, ...) do {		       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+									       \
+	kunit_stream_add(__stream, message);				       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+	KUNIT_ASSERT_END(test, success, __stream);			       \
+} while (0)
+
+#define KUNIT_ASSERT_FAILURE(test, fmt, ...) do {			       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+									       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+	KUNIT_ASSERT_END(test, false, __stream);			       \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_TRUE() - Sets an assertion that @condition is true.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression. The test fails and aborts when
+ * this does not evaluate to true.
+ *
+ * This and assertions of the form `KUNIT_ASSERT_*` will cause the test case to
+ * fail *and immediately abort* when the specified condition is not met. Unlike
+ * an expectation failure, it will prevent the test case from continuing to run;
+ * this is otherwise known as an *assertion failure*.
+ */
+#define KUNIT_ASSERT_TRUE(test, condition)				       \
+		KUNIT_ASSERT(test, (condition),				       \
+			     "Asserted " #condition " is true, but is false.\n")
+
+#define KUNIT_ASSERT_TRUE_MSG(test, condition, fmt, ...)		       \
+		KUNIT_ASSERT_MSG(test, (condition),			       \
+				 "Asserted " #condition " is true, but is false.\n",\
+				 fmt, ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_FALSE() - Sets an assertion that @condition is false.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression.
+ *
+ * Sets an assertion that the value that @condition evaluates to is false. This
+ * is the same as KUNIT_EXPECT_FALSE(), except it causes an assertion failure
+ * (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_FALSE(test, condition)				       \
+		KUNIT_ASSERT(test, !(condition),			       \
+			     "Asserted " #condition " is false, but is true.\n")
+
+#define KUNIT_ASSERT_FALSE_MSG(test, condition, fmt, ...)		       \
+		KUNIT_ASSERT_MSG(test, !(condition),			       \
+				 "Asserted " #condition " is false, but is true.\n",\
+				 fmt, ##__VA_ARGS__)
+
+void kunit_assert_binary_msg(struct kunit *test,
+			     long long left, const char *left_name,
+			     long long right, const char *right_name,
+			     bool compare_result,
+			     const char *compare_name,
+			     const char *file,
+			     const char *line,
+			     const char *fmt, ...);
+
+static inline void kunit_assert_binary(struct kunit *test,
+				       long long left, const char *left_name,
+				       long long right, const char *right_name,
+				       bool compare_result,
+				       const char *compare_name,
+				       const char *file,
+				       const char *line)
+{
+	kunit_assert_binary_msg(test,
+				left, left_name,
+				right, right_name,
+				compare_result,
+				compare_name,
+				file,
+				line,
+				NULL);
+}
+
+void kunit_assert_ptr_binary_msg(struct kunit *test,
+				 void *left, const char *left_name,
+				 void *right, const char *right_name,
+				 bool compare_result,
+				 const char *compare_name,
+				 const char *file,
+				 const char *line,
+				 const char *fmt, ...);
+
+static inline void kunit_assert_ptr_binary(struct kunit *test,
+					   void *left, const char *left_name,
+					   void *right, const char *right_name,
+					   bool compare_result,
+					   const char *compare_name,
+					   const char *file,
+					   const char *line)
+{
+	kunit_assert_ptr_binary_msg(test,
+				    left, left_name,
+				    right, right_name,
+				    compare_result,
+				    compare_name,
+				    file,
+				    line,
+				    NULL);
+}
+
+/*
+ * A factory macro for defining the expectations for the basic comparisons
+ * defined for the built in types.
+ *
+ * Unfortunately, there is no common type that all types can be promoted to for
+ * which all the binary operators behave the same way as for the actual types
+ * (for example, there is no type that long long and unsigned long long can
+ * both be cast to where the comparison result is preserved for all values). So
+ * the best we can do is do the comparison in the original types and then coerce
+ * everything to long long for printing; this way, the comparison behaves
+ * correctly and the printed out value usually makes sense without
+ * interpretation, but can always be interpretted to figure out the actual
+ * value.
+ */
+#define KUNIT_ASSERT_BINARY(test, left, condition, right) do {		       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_assert_binary(test,					       \
+			    (long long) __left, #left,			       \
+			    (long long) __right, #right,		       \
+			    __left condition __right, #condition,	       \
+			    __FILE__, __stringify(__LINE__));		       \
+} while (0)
+
+#define KUNIT_ASSERT_BINARY_MSG(test, left, condition, right, fmt, ...) do {   \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_assert_binary_msg(test,					       \
+				(long long) __left, #left,		       \
+				(long long) __right, #right,		       \
+				__left condition __right, #condition,	       \
+				__FILE__, __stringify(__LINE__),	       \
+				fmt, ##__VA_ARGS__);			       \
+} while (0)
+
+/*
+ * Just like KUNIT_EXPECT_BINARY, but for comparing pointer types.
+ */
+#define KUNIT_ASSERT_PTR_BINARY(test, left, condition, right) do {	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_assert_ptr_binary(test,					       \
+				(void *) __left, #left,			       \
+				(void *) __right, #right,		       \
+				__left condition __right, #condition,	       \
+				__FILE__, __stringify(__LINE__));	       \
+} while (0)
+
+#define KUNIT_ASSERT_PTR_BINARY_MSG(test,				       \
+				    left,				       \
+				    condition,				       \
+				    right,				       \
+				    fmt, ...) do {			       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+	kunit_assert_ptr_binary_msg(test,				       \
+				    (void *) __left, #left,		       \
+				    (void *) __right, #right,		       \
+				    __left condition __right, #condition,      \
+				    __FILE__, __stringify(__LINE__),	       \
+				    fmt, ##__VA_ARGS__);		       \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_EQ() - Sets an assertion that @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are
+ * equal. This is the same as KUNIT_EXPECT_EQ(), except it causes an assertion
+ * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_EQ(test, left, right) \
+		KUNIT_ASSERT_BINARY(test, left, ==, right)
+
+#define KUNIT_ASSERT_EQ_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_BINARY_MSG(test,				       \
+					left,				       \
+					==,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_PTR_EQ() - Asserts that pointers @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a pointer.
+ * @right: an arbitrary expression that evaluates to a pointer.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are
+ * equal. This is the same as KUNIT_EXPECT_EQ(), except it causes an assertion
+ * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_PTR_EQ(test, left, right) \
+		KUNIT_ASSERT_PTR_BINARY(test, left, ==, right)
+
+#define KUNIT_ASSERT_PTR_EQ_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_PTR_BINARY_MSG(test,			       \
+					    left,			       \
+					    ==,				       \
+					    right,			       \
+					    fmt,			       \
+					    ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_NE() - An assertion that @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are not
+ * equal. This is the same as KUNIT_EXPECT_NE(), except it causes an assertion
+ * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_NE(test, left, right) \
+		KUNIT_ASSERT_BINARY(test, left, !=, right)
+
+#define KUNIT_ASSERT_NE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_BINARY_MSG(test,				       \
+					left,				       \
+					!=,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_PTR_NE() - Asserts that pointers @left and @right are not equal.
+ * KUNIT_ASSERT_PTR_EQ() - Asserts that pointers @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a pointer.
+ * @right: an arbitrary expression that evaluates to a pointer.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are not
+ * equal. This is the same as KUNIT_EXPECT_NE(), except it causes an assertion
+ * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_PTR_NE(test, left, right) \
+		KUNIT_ASSERT_PTR_BINARY(test, left, !=, right)
+
+#define KUNIT_ASSERT_PTR_NE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_PTR_BINARY_MSG(test,			       \
+					    left,			       \
+					    !=,				       \
+					    right,			       \
+					    fmt,			       \
+					    ##__VA_ARGS__)
+/**
+ * KUNIT_ASSERT_LT() - An assertion that @left is less than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is less than the
+ * value that @right evaluates to. This is the same as KUNIT_EXPECT_LT(), except
+ * it causes an assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion
+ * is not met.
+ */
+#define KUNIT_ASSERT_LT(test, left, right) \
+		KUNIT_ASSERT_BINARY(test, left, <, right)
+
+#define KUNIT_ASSERT_LT_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_BINARY_MSG(test,				       \
+					left,				       \
+					<,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+/**
+ * KUNIT_ASSERT_LE() - An assertion that @left is less than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is less than or
+ * equal to the value that @right evaluates to. This is the same as
+ * KUNIT_EXPECT_LE(), except it causes an assertion failure (see
+ * KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_LE(test, left, right) \
+		KUNIT_ASSERT_BINARY(test, left, <=, right)
+
+#define KUNIT_ASSERT_LE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_BINARY_MSG(test,				       \
+					left,				       \
+					<=,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+/**
+ * KUNIT_ASSERT_GT() - An assertion that @left is greater than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is greater than the
+ * value that @right evaluates to. This is the same as KUNIT_EXPECT_GT(), except
+ * it causes an assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion
+ * is not met.
+ */
+#define KUNIT_ASSERT_GT(test, left, right) \
+		KUNIT_ASSERT_BINARY(test, left, >, right)
+
+#define KUNIT_ASSERT_GT_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_BINARY_MSG(test,				       \
+					left,				       \
+					>,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_GE() - Assertion that @left is greater than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is greater than the
+ * value that @right evaluates to. This is the same as KUNIT_EXPECT_GE(), except
+ * it causes an assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion
+ * is not met.
+ */
+#define KUNIT_ASSERT_GE(test, left, right) \
+		KUNIT_ASSERT_BINARY(test, left, >=, right)
+
+#define KUNIT_ASSERT_GE_MSG(test, left, right, fmt, ...)		       \
+		KUNIT_ASSERT_BINARY_MSG(test,				       \
+					left,				       \
+					>=,				       \
+					right,				       \
+					fmt,				       \
+					##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_STREQ() - An assertion that strings @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are
+ * equal. This is the same as KUNIT_EXPECT_STREQ(), except it causes an
+ * assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_STREQ(test, left, right) do {			       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+									       \
+	KUNIT_ASSERT_END(test, !strcmp(left, right), __stream);		       \
+} while (0)
+
+#define KUNIT_ASSERT_STREQ_MSG(test, left, right, fmt, ...) do {	       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+									       \
+	KUNIT_ASSERT_END(test, !strcmp(left, right), __stream);		       \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_STRNEQ() - Expects that strings @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * not equal. This is semantically equivalent to
+ * KUNIT_ASSERT_TRUE(@test, strcmp((@left), (@right))). See KUNIT_ASSERT_TRUE()
+ * for more information.
+ */
+#define KUNIT_ASSERT_STRNEQ(test, left, right) do {			       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+									       \
+	KUNIT_ASSERT_END(test, strcmp(left, right), __stream);		       \
+} while (0)
+
+#define KUNIT_ASSERT_STRNEQ_MSG(test, left, right, fmt, ...) do {	       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+	typeof(left) __left = (left);					       \
+	typeof(right) __right = (right);				       \
+									       \
+	kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left);	       \
+	kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right);	       \
+	kunit_stream_add(__stream, fmt, ##__VA_ARGS__);			       \
+									       \
+	KUNIT_ASSERT_END(test, strcmp(left, right), __stream);		       \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_NOT_ERR_OR_NULL() - Assertion that @ptr is not null and not err.
+ * @test: The test context object.
+ * @ptr: an arbitrary pointer.
+ *
+ * Sets an assertion that the value that @ptr evaluates to is not null and not
+ * an errno stored in a pointer. This is the same as
+ * KUNIT_EXPECT_NOT_ERR_OR_NULL(), except it causes an assertion failure (see
+ * KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr) do {			       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+	typeof(ptr) __ptr = (ptr);					       \
+									       \
+	if (!__ptr)							       \
+		kunit_stream_add(__stream,				       \
+				 "Asserted " #ptr " is not null, but is.\n");  \
+	if (IS_ERR(__ptr))						       \
+		kunit_stream_add(__stream,				       \
+				 "Asserted " #ptr " is not error, but is: %ld\n",\
+				 PTR_ERR(__ptr));			       \
+									       \
+	KUNIT_ASSERT_END(test, !IS_ERR_OR_NULL(__ptr), __stream);	       \
+} while (0)
+
+#define KUNIT_ASSERT_NOT_ERR_OR_NULL_MSG(test, ptr, fmt, ...) do {	       \
+	struct kunit_stream *__stream = KUNIT_ASSERT_START(test);	       \
+	typeof(ptr) __ptr = (ptr);					       \
+									       \
+	if (!__ptr) {							       \
+		kunit_stream_add(__stream,				       \
+				 "Asserted " #ptr " is not null, but is.\n");  \
+		kunit_stream_add(__stream, fmt, ##__VA_ARGS__);		       \
+	}								       \
+	if (IS_ERR(__ptr)) {						       \
+		kunit_stream_add(__stream,				       \
+				 "Asserted " #ptr " is not error, but is: %ld\n",\
+				 PTR_ERR(__ptr));			       \
+									       \
+		kunit_stream_add(__stream, fmt, ##__VA_ARGS__);		       \
+	}								       \
+	KUNIT_ASSERT_END(test, !IS_ERR_OR_NULL(__ptr), __stream);	       \
+} while (0)
+
 #endif /* _KUNIT_TEST_H */
kunit/string-stream-test.c +6 -6
index 9cbd99236d15e..f760c6ddb7919 100644
@@ -19,7 +19,7 @@ static void string_stream_test_get_string(struct kunit *test)
 	string_stream_add(stream, " %s", "bar");
 
 	output = string_stream_get_string(stream);
-	KUNIT_EXPECT_STREQ(test, output, "Foo bar");
+	KUNIT_ASSERT_STREQ(test, output, "Foo bar");
 	kfree(output);
 	destroy_string_stream(stream);
 }
@@ -34,16 +34,16 @@ static void string_stream_test_add_and_clear(struct kunit *test)
 		string_stream_add(stream, "A");
 
 	output = string_stream_get_string(stream);
-	KUNIT_EXPECT_STREQ(test, output, "AAAAAAAAAA");
-	KUNIT_EXPECT_EQ(test, stream->length, 10);
-	KUNIT_EXPECT_FALSE(test, string_stream_is_empty(stream));
+	KUNIT_ASSERT_STREQ(test, output, "AAAAAAAAAA");
+	KUNIT_ASSERT_EQ(test, stream->length, 10);
+	KUNIT_ASSERT_FALSE(test, string_stream_is_empty(stream));
 	kfree(output);
 
 	string_stream_clear(stream);
 
 	output = string_stream_get_string(stream);
-	KUNIT_EXPECT_STREQ(test, output, "");
-	KUNIT_EXPECT_TRUE(test, string_stream_is_empty(stream));
+	KUNIT_ASSERT_STREQ(test, output, "");
+	KUNIT_ASSERT_TRUE(test, string_stream_is_empty(stream));
 	destroy_string_stream(stream);
 }
 
kunit/test-test.c +2 -0
index 577df5a8d309e..7afc9bb52f7be 100644
@@ -78,11 +78,13 @@ static int kunit_try_catch_test_init(struct kunit *test)
 	struct kunit_try_catch_test_context *ctx;
 
 	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
 	test->priv = ctx;
 
 	ctx->try_catch = kunit_kmalloc(test,
 				       sizeof(*ctx->try_catch),
 				       GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->try_catch);
 
 	return 0;
 }
kunit/test.c +66 -0

69 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#16 lore raw

PATCH v3 12/18 kunit: test: add tests for KUnit managed resources

In reply to Brendan Higgins

From: Avinash Kondareddy <[email protected]>

Add unit tests for KUnit managed resources. KUnit managed resources (struct kunit_resource) are resources that are automatically cleaned up at the end of a KUnit test, similar to the concept of devm_* managed resources.

---
Changes Since Last Revision:
- Added more details to change log as per Shuah's comments.
- Made use of new EXPECT macro for pointer comparison to warning reported by kbuild bot.

---
 kunit/test-test.c | 123 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 123 insertions(+)
kunit/test-test.c +123 -0
index 7afc9bb52f7be..ee926f798b266 100644
@@ -101,3 +101,126 @@ static struct kunit_module kunit_try_catch_test_module = {
 	.test_cases = kunit_try_catch_test_cases,
 };
 module_test(kunit_try_catch_test_module);
+
+/*
+ * Context for testing test managed resources
+ * is_resource_initialized is used to test arbitrary resources
+ */
+struct kunit_test_resource_context {
+	struct kunit test;
+	bool is_resource_initialized;
+};
+
+static int fake_resource_init(struct kunit_resource *res, void *context)
+{
+	struct kunit_test_resource_context *ctx = context;
+
+	res->allocation = &ctx->is_resource_initialized;
+	ctx->is_resource_initialized = true;
+	return 0;
+}
+
+static void fake_resource_free(struct kunit_resource *res)
+{
+	bool *is_resource_initialized = res->allocation;
+
+	*is_resource_initialized = false;
+}
+
+static void kunit_resource_test_init_resources(struct kunit *test)
+{
+	struct kunit_test_resource_context *ctx = test->priv;
+
+	kunit_init_test(&ctx->test, "testing_test_init_test");
+
+	KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
+}
+
+static void kunit_resource_test_alloc_resource(struct kunit *test)
+{
+	struct kunit_test_resource_context *ctx = test->priv;
+	struct kunit_resource *res;
+	kunit_resource_free_t free = fake_resource_free;
+
+	res = kunit_alloc_resource(&ctx->test,
+				   fake_resource_init,
+				   fake_resource_free,
+				   ctx);
+
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, res);
+	KUNIT_EXPECT_PTR_EQ(test,
+			    &ctx->is_resource_initialized, res->allocation);
+	KUNIT_EXPECT_TRUE(test, list_is_last(&res->node, &ctx->test.resources));
+	KUNIT_EXPECT_PTR_EQ(test, free, res->free);
+}
+
+static void kunit_resource_test_free_resource(struct kunit *test)
+{
+	struct kunit_test_resource_context *ctx = test->priv;
+	struct kunit_resource *res = kunit_alloc_resource(&ctx->test,
+							  fake_resource_init,
+							  fake_resource_free,
+							  ctx);
+
+	kunit_free_resource(&ctx->test, res);
+
+	KUNIT_EXPECT_EQ(test, false, ctx->is_resource_initialized);
+	KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
+}
+
+static void kunit_resource_test_cleanup_resources(struct kunit *test)
+{
+	int i;
+	struct kunit_test_resource_context *ctx = test->priv;
+	struct kunit_resource *resources[5];
+
+	for (i = 0; i < ARRAY_SIZE(resources); i++) {
+		resources[i] = kunit_alloc_resource(&ctx->test,
+						    fake_resource_init,
+						    fake_resource_free,
+						    ctx);
+	}
+
+	kunit_cleanup(&ctx->test);
+
+	KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
+}
+
+static int kunit_resource_test_init(struct kunit *test)
+{
+	struct kunit_test_resource_context *ctx =
+			kzalloc(sizeof(*ctx), GFP_KERNEL);
+
+	if (!ctx)
+		return -ENOMEM;
+
+	test->priv = ctx;
+
+	kunit_init_test(&ctx->test, "test_test_context");
+
+	return 0;
+}
+
+static void kunit_resource_test_exit(struct kunit *test)
+{
+	struct kunit_test_resource_context *ctx = test->priv;
+
+	kunit_cleanup(&ctx->test);
+	kfree(ctx);
+}
+
+static struct kunit_case kunit_resource_test_cases[] = {
+	KUNIT_CASE(kunit_resource_test_init_resources),
+	KUNIT_CASE(kunit_resource_test_alloc_resource),
+	KUNIT_CASE(kunit_resource_test_free_resource),
+	KUNIT_CASE(kunit_resource_test_cleanup_resources),
+	{},
+};
+
+static struct kunit_module kunit_resource_test_module = {
+	.name = "kunit-resource-test",
+	.init = kunit_resource_test_init,
+	.exit = kunit_resource_test_exit,
+	.test_cases = kunit_resource_test_cases,
+};
+module_test(kunit_resource_test_module);
Signature · 6 lines
2.21.0.1020.gf2820cf01a-goog

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#17 lore raw

PATCH v3 13/18 kunit: tool: add Python wrappers for running KUnit tests

In reply to Brendan Higgins

From: Felix Guo <[email protected]>

The ultimate goal is to create minimal isolated test binaries; in the meantime we are using UML to provide the infrastructure to run tests, so define an abstract way to configure and run tests that allow us to change the context in which tests are built without affecting the user. This also makes pretty and dynamic error reporting, and a lot of other nice features easier.

kunit_config.py:
- parse .config and Kconfig files.

kunit_kernel.py: provides helper functions to:
- configure the kernel using kunitconfig.
- build the kernel with the appropriate configuration.
- provide function to invoke the kernel and stream the output back.

---
 tools/testing/kunit/.gitignore                |   3 +
 tools/testing/kunit/kunit.py                  | 116 +++++++
 tools/testing/kunit/kunit_config.py           |  66 ++++
 tools/testing/kunit/kunit_kernel.py           | 148 +++++++++
 tools/testing/kunit/kunit_parser.py           | 290 ++++++++++++++++++
 tools/testing/kunit/kunit_tool_test.py        | 206 +++++++++++++
 .../test_is_test_passed-all_passed.log        |  32 ++
 .../test_data/test_is_test_passed-crash.log   |  69 +++++
 .../test_data/test_is_test_passed-failure.log |  36 +++
 .../test_is_test_passed-no_tests_run.log      |  75 +++++
 .../test_output_isolated_correctly.log        | 106 +++++++
 .../test_data/test_read_from_file.kconfig     |  17 +
 12 files changed, 1164 insertions(+)
 create mode 100644 tools/testing/kunit/.gitignore
 create mode 100755 tools/testing/kunit/kunit.py
 create mode 100644 tools/testing/kunit/kunit_config.py
 create mode 100644 tools/testing/kunit/kunit_kernel.py
 create mode 100644 tools/testing/kunit/kunit_parser.py
 create mode 100755 tools/testing/kunit/kunit_tool_test.py
 create mode 100644 tools/testing/kunit/test_data/test_is_test_passed-all_passed.log
 create mode 100644 tools/testing/kunit/test_data/test_is_test_passed-crash.log
 create mode 100644 tools/testing/kunit/test_data/test_is_test_passed-failure.log
 create mode 100644 tools/testing/kunit/test_data/test_is_test_passed-no_tests_run.log
 create mode 100644 tools/testing/kunit/test_data/test_output_isolated_correctly.log
 create mode 100644 tools/testing/kunit/test_data/test_read_from_file.kconfig
tools/testing/kunit/.gitignore new file +3 -0
new file mode 100644
index 0000000000000..c791ff59a37a9
@@ -0,0 +1,3 @@
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
\ No newline at end of file
tools/testing/kunit/kunit.py new file +116 -0

116 lines not on this page · raw message

tools/testing/kunit/kunit_config.py new file +66 -0

66 lines not on this page · raw message

tools/testing/kunit/kunit_kernel.py new file +148 -0

148 lines not on this page · raw message

tools/testing/kunit/kunit_parser.py new file +290 -0

290 lines not on this page · raw message

tools/testing/kunit/kunit_tool_test.py new file +206 -0

206 lines not on this page · raw message

tools/testing/kunit/test_data/test_is_test_passed-all_passed.log new file +32 -0
new file mode 100644
index 0000000000000..8b5aa2f0cb498
@@ -0,0 +1,32 @@
+TAP version 14
+	# Subtest: sysctl_test
+	1..8
+	# sysctl_test_dointvec_null_tbl_data: sysctl_test_dointvec_null_tbl_data passed
+	ok 1 - sysctl_test_dointvec_null_tbl_data
+	# sysctl_test_dointvec_table_maxlen_unset: sysctl_test_dointvec_table_maxlen_unset passed
+	ok 2 - sysctl_test_dointvec_table_maxlen_unset
+	# sysctl_test_dointvec_table_len_is_zero: sysctl_test_dointvec_table_len_is_zero passed
+	ok 3 - sysctl_test_dointvec_table_len_is_zero
+	# sysctl_test_dointvec_table_read_but_position_set: sysctl_test_dointvec_table_read_but_position_set passed
+	ok 4 - sysctl_test_dointvec_table_read_but_position_set
+	# sysctl_test_dointvec_happy_single_positive: sysctl_test_dointvec_happy_single_positive passed
+	ok 5 - sysctl_test_dointvec_happy_single_positive
+	# sysctl_test_dointvec_happy_single_negative: sysctl_test_dointvec_happy_single_negative passed
+	ok 6 - sysctl_test_dointvec_happy_single_negative
+	# sysctl_test_dointvec_single_less_int_min: sysctl_test_dointvec_single_less_int_min passed
+	ok 7 - sysctl_test_dointvec_single_less_int_min
+	# sysctl_test_dointvec_single_greater_int_max: sysctl_test_dointvec_single_greater_int_max passed
+	ok 8 - sysctl_test_dointvec_single_greater_int_max
+kunit sysctl_test: all tests passed
+ok 1 - sysctl_test
+	# Subtest: example
+	1..2
+init_module
+	# example_simple_test: initializing
+	# example_simple_test: example_simple_test passed
+	ok 1 - example_simple_test
+	# example_mock_test: initializing
+	# example_mock_test: example_mock_test passed
+	ok 2 - example_mock_test
+kunit example: all tests passed
+ok 2 - example
tools/testing/kunit/test_data/test_is_test_passed-crash.log new file +69 -0

69 lines not on this page · raw message

tools/testing/kunit/test_data/test_is_test_passed-failure.log new file +36 -0
new file mode 100644
index 0000000000000..73ed8730b76b2
@@ -0,0 +1,36 @@
+TAP version 14
+	# Subtest: sysctl_test
+	1..8
+	# sysctl_test_dointvec_null_tbl_data: sysctl_test_dointvec_null_tbl_data passed
+	ok 1 - sysctl_test_dointvec_null_tbl_data
+	# sysctl_test_dointvec_table_maxlen_unset: sysctl_test_dointvec_table_maxlen_unset passed
+	ok 2 - sysctl_test_dointvec_table_maxlen_unset
+	# sysctl_test_dointvec_table_len_is_zero: sysctl_test_dointvec_table_len_is_zero passed
+	ok 3 - sysctl_test_dointvec_table_len_is_zero
+	# sysctl_test_dointvec_table_read_but_position_set: sysctl_test_dointvec_table_read_but_position_set passed
+	ok 4 - sysctl_test_dointvec_table_read_but_position_set
+	# sysctl_test_dointvec_happy_single_positive: sysctl_test_dointvec_happy_single_positive passed
+	ok 5 - sysctl_test_dointvec_happy_single_positive
+	# sysctl_test_dointvec_happy_single_negative: sysctl_test_dointvec_happy_single_negative passed
+	ok 6 - sysctl_test_dointvec_happy_single_negative
+	# sysctl_test_dointvec_single_less_int_min: sysctl_test_dointvec_single_less_int_min passed
+	ok 7 - sysctl_test_dointvec_single_less_int_min
+	# sysctl_test_dointvec_single_greater_int_max: sysctl_test_dointvec_single_greater_int_max passed
+	ok 8 - sysctl_test_dointvec_single_greater_int_max
+kunit sysctl_test: all tests passed
+ok 1 - sysctl_test
+	# Subtest: example
+	1..2
+init_module
+	# example_simple_test: initializing
+	# example_simple_test: EXPECTATION FAILED at kunit/example-test.c:30
+	Expected 1 + 1 == 3, but
+		1 + 1 == 2
+		3 == 3
+	# example_simple_test: example_simple_test failed
+	not ok 1 - example_simple_test
+	# example_mock_test: initializing
+	# example_mock_test: example_mock_test passed
+	ok 2 - example_mock_test
+kunit example: one or more tests failed
+not ok 2 - example
tools/testing/kunit/test_data/test_is_test_passed-no_tests_run.log new file +75 -0

75 lines not on this page · raw message

tools/testing/kunit/test_data/test_output_isolated_correctly.log new file +106 -0

106 lines not on this page · raw message

tools/testing/kunit/test_data/test_read_from_file.kconfig new file +17 -0
new file mode 100644
index 0000000000000..d2a4928ac773b
@@ -0,0 +1,17 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# User Mode Linux/x86 4.12.0-rc3 Kernel Configuration
+#
+CONFIG_UML=y
+CONFIG_MMU=y
+
+#
+# UML-specific options
+#
+
+#
+# Host processor type and features
+#
+# CONFIG_MK8 is not set
+CONFIG_TEST=y
+CONFIG_EXAMPLE_TEST=y
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#18 lore raw

PATCH v3 14/18 kunit: defconfig: add defconfigs for building KUnit tests

In reply to Brendan Higgins

Add defconfig for UML and a fragment that can be used to configure other architectures for building KUnit tests. Add option to kunit_tool to use a defconfig to create the kunitconfig.

---
 arch/um/configs/kunit_defconfig              |  8 ++++++++
 tools/testing/kunit/configs/all_tests.config |  8 ++++++++
 tools/testing/kunit/kunit.py                 | 18 ++++++++++++++++--
 tools/testing/kunit/kunit_kernel.py          |  3 ++-
 4 files changed, 34 insertions(+), 3 deletions(-)
 create mode 100644 arch/um/configs/kunit_defconfig
 create mode 100644 tools/testing/kunit/configs/all_tests.config
arch/um/configs/kunit_defconfig new file +8 -0
new file mode 100644
index 0000000000000..bfe49689038f1
@@ -0,0 +1,8 @@
+CONFIG_OF=y
+CONFIG_OF_UNITTEST=y
+CONFIG_OF_OVERLAY=y
+CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_KUNIT=y
+CONFIG_KUNIT_TEST=y
+CONFIG_KUNIT_EXAMPLE_TEST=y
tools/testing/kunit/configs/all_tests.config new file +8 -0
new file mode 100644
index 0000000000000..bfe49689038f1
@@ -0,0 +1,8 @@
+CONFIG_OF=y
+CONFIG_OF_UNITTEST=y
+CONFIG_OF_OVERLAY=y
+CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_KUNIT=y
+CONFIG_KUNIT_TEST=y
+CONFIG_KUNIT_EXAMPLE_TEST=y
tools/testing/kunit/kunit.py +16 -2
index 85ed1c32a6c48..956326f87101f 100755
@@ -11,6 +11,7 @@ import argparse
 import sys
 import os
 import time
+import shutil
 
 from collections import namedtuple
 from enum import Enum, auto
@@ -21,7 +22,7 @@ import kunit_parser
 
 KunitResult = namedtuple('KunitResult', ['status','result'])
 
-KunitRequest = namedtuple('KunitRequest', ['raw_output','timeout', 'jobs', 'build_dir'])
+KunitRequest = namedtuple('KunitRequest', ['raw_output','timeout', 'jobs', 'build_dir', 'defconfig'])
 
 class KunitStatus(Enum):
 	SUCCESS = auto()
@@ -29,8 +30,16 @@ class KunitStatus(Enum):
 	BUILD_FAILURE = auto()
 	TEST_FAILURE = auto()
 
+def create_default_kunitconfig():
+	if not os.path.exists(kunit_kernel.KUNITCONFIG_PATH):
+		shutil.copyfile('arch/um/configs/kunit_defconfig',
+				kunit_kernel.KUNITCONFIG_PATH)
+
 def run_tests(linux: kunit_kernel.LinuxSourceTree,
 	      request: KunitRequest) -> KunitResult:
+	if request.defconfig:
+		create_default_kunitconfig()
+
 	config_start = time.time()
 	success = linux.build_reconfig(request.build_dir)
 	config_end = time.time()
@@ -99,13 +108,18 @@ def main(argv, linux):
 				'directory.',
 				type=str, default=None, metavar='build_dir')
 
+	run_parser.add_argument('--defconfig',
+				help='Uses a default kunitconfig.',
+				action='store_true')
+
 	cli_args = parser.parse_args(argv)
 
 	if cli_args.subcommand == 'run':
 		request = KunitRequest(cli_args.raw_output,
 				       cli_args.timeout,
 				       cli_args.jobs,
-				       cli_args.build_dir)
+				       cli_args.build_dir,
+				       cli_args.defconfig)
 		result = run_tests(linux, request)
 		if result.status != KunitStatus.SUCCESS:
 			sys.exit(1)
tools/testing/kunit/kunit_kernel.py +2 -1
index 07c0abf2f47df..bf38768353313 100644
@@ -14,6 +14,7 @@ import os
 import kunit_config
 
 KCONFIG_PATH = '.config'
+KUNITCONFIG_PATH = 'kunitconfig'
 
 class ConfigError(Exception):
 	"""Represents an error trying to configure the Linux kernel."""
@@ -81,7 +82,7 @@ class LinuxSourceTree(object):
 
 	def __init__(self):
 		self._kconfig = kunit_config.Kconfig()
-		self._kconfig.read_from_file('kunitconfig')
+		self._kconfig.read_from_file(KUNITCONFIG_PATH)
 		self._ops = LinuxSourceTreeOperations()
 
 	def clean(self):
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#19 lore raw

PATCH v3 15/18 Documentation: kunit: add documentation for KUnit

In reply to Brendan Higgins

Add documentation for KUnit, the Linux kernel unit testing framework.
- Add intro and usage guide for KUnit
- Add API reference

---
Changes Since Last Revision:
- Addressed reference to incorrect number of sections, as per Randy's comment.
- Make section underlines same length as the section title, as per Randy's comments.

---
 Documentation/index.rst           |   1 +
 Documentation/kunit/api/index.rst |  16 +
 Documentation/kunit/api/test.rst  |  14 +
 Documentation/kunit/faq.rst       |  62 ++++
 Documentation/kunit/index.rst     |  79 ++++
 Documentation/kunit/start.rst     | 180 ++++++++++
 Documentation/kunit/usage.rst     | 575 ++++++++++++++++++++++++++++++
 7 files changed, 927 insertions(+)
 create mode 100644 Documentation/kunit/api/index.rst
 create mode 100644 Documentation/kunit/api/test.rst
 create mode 100644 Documentation/kunit/faq.rst
 create mode 100644 Documentation/kunit/index.rst
 create mode 100644 Documentation/kunit/start.rst
 create mode 100644 Documentation/kunit/usage.rst
Documentation/index.rst +1 -0
index 80a421cb935e7..264cfd613a774 100644
@@ -65,6 +65,7 @@ merged much easier.
    kernel-hacking/index
    trace/index
    maintainer/index
+   kunit/index
 
 Kernel API documentation
 ------------------------
Documentation/kunit/api/index.rst new file +16 -0
new file mode 100644
index 0000000000000..9b9bffe5d41a0
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+API Reference
+=============
+.. toctree::
+
+	test
+
+This section documents the KUnit kernel testing API. It is divided into the
+following sections:
+
+================================= ==============================================
+:doc:`test`                       documents all of the standard testing API
+                                  excluding mocking or mocking related features.
+================================= ==============================================
Documentation/kunit/api/test.rst new file +14 -0
new file mode 100644
index 0000000000000..d0ce19b1e1185
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========
+Test API
+========
+
+This file documents all of the standard testing API excluding mocking or mocking
+related features.
+
+.. kernel-doc:: include/kunit/test.h
+   :internal:
+
+.. kernel-doc:: include/kunit/kunit-stream.h
+   :internal:
Documentation/kunit/faq.rst new file +62 -0

62 lines not on this page · raw message

Documentation/kunit/index.rst new file +79 -0

79 lines not on this page · raw message

Documentation/kunit/start.rst new file +180 -0

180 lines not on this page · raw message

Documentation/kunit/usage.rst new file +575 -0

575 lines not on this page · raw message

Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
maintainer
#20 lore raw

Re: [PATCH v3 15/18] Documentation: kunit: add documentation for KUnit

Quoted 14 lines · On Mon, 13 May 2019 22:42:49 -0700 Brendan Higgins <[email protected]>…

Add documentation for KUnit, the Linux kernel unit testing framework.
- Add intro and usage guide for KUnit
- Add API reference

---
Changes Since Last Revision:
- Addressed reference to incorrect number of sections, as per Randy's comment.
- Make section underlines same length as the section title, as per Randy's comments.

Quoted 8 lines
---
 Documentation/index.rst           |   1 +
 Documentation/kunit/api/index.rst |  16 +
 Documentation/kunit/api/test.rst  |  14 +
 Documentation/kunit/faq.rst       |  62 ++++
 Documentation/kunit/index.rst     |  79 ++++
 Documentation/kunit/start.rst     | 180 ++++++++++
 Documentation/kunit/usage.rst     | 575 ++++++++++++++++++++++++++++++

Certainly it's great to see all this documentation coming with this feature!

Naturally, though, I have one request: I'd rather not see this at the top level, which is more than crowded enough as it is. Can this material please go into the development tools book, alongside the kselftest documentation?

Thanks,

jon

#21 lore raw

Re: [PATCH v3 15/18] Documentation: kunit: add documentation for KUnit

Quoted 26 lines · Jonathan Corbet
Quoted 14 lines · On Mon, 13 May 2019 22:42:49 -0700 Brendan Higgins <[email protected]>…

Add documentation for KUnit, the Linux kernel unit testing framework.
- Add intro and usage guide for KUnit
- Add API reference

---
Changes Since Last Revision:
- Addressed reference to incorrect number of sections, as per Randy's comment.
- Make section underlines same length as the section title, as per Randy's comments.

Quoted 8 lines
---
 Documentation/index.rst           |   1 +
 Documentation/kunit/api/index.rst |  16 +
 Documentation/kunit/api/test.rst  |  14 +
 Documentation/kunit/faq.rst       |  62 ++++
 Documentation/kunit/index.rst     |  79 ++++
 Documentation/kunit/start.rst     | 180 ++++++++++
 Documentation/kunit/usage.rst     | 575 ++++++++++++++++++++++++++++++
Quoted 7 lines

Certainly it's great to see all this documentation coming with this feature!

Naturally, though, I have one request: I'd rather not see this at the top level, which is more than crowded enough as it is. Can this material please go into the development tools book, alongside the kselftest documentation?

Oh yeah, that seems like the obvious home for this in hindsight. Sorry about that. Will fix in next revision!

Thanks!

maintainer
#22 lore raw

Re: [PATCH v3 15/18] Documentation: kunit: add documentation for KUnit

Quoted 7 lines · On Tue, 14 May 2019 11:08:10 -0700 Brendan Higgins <[email protected]>…
Quoted 4 lines

Naturally, though, I have one request: I'd rather not see this at the top level, which is more than crowded enough as it is. Can this material please go into the development tools book, alongside the kselftest documentation?

Oh yeah, that seems like the obvious home for this in hindsight. Sorry about that. Will fix in next revision!

No need to apologize - I have to say the same thing to everybody :)

Thanks,

jon
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#23 lore raw

Re: [PATCH v3 15/18] Documentation: kunit: add documentation for KUnit

Quoted 7 lines · Jonathan Corbet
Quoted 4 lines · On Tue, 14 May 2019 11:08:10 -0700 Brendan Higgins <[email protected]>…
Quoted 4 lines

Naturally, though, I have one request: I'd rather not see this at the top level, which is more than crowded enough as it is. Can this material please go into the development tools book, alongside the kselftest documentation?

Hmmm...probably premature to bring this up, but Documentation/dev-tools/ is kind of thrown together.

It would be nice to provide a coherent overview, maybe provide some basic grouping as well.

It would be nice if there was kind of a gentle introduction to the tools, which ones you should be looking at, when, why, etc.

Quoted 4 lines
Quoted 2 lines

Oh yeah, that seems like the obvious home for this in hindsight. Sorry about that. Will fix in next revision!

No need to apologize - I have to say the same thing to everybody :)

maintainer
#24 lore raw

Re: [PATCH v3 15/18] Documentation: kunit: add documentation for KUnit

Quoted 2 lines · On Tue, 14 May 2019 16:19:02 -0700 Brendan Higgins <[email protected]>…

Hmmm...probably premature to bring this up, but Documentation/dev-tools/ is kind of thrown together.

Wait a minute, man... *I* created that directory, are you impugning my work? :)

But yes, "kind of thrown together" is a good description of much of Documentation/. A number of people have been working for years to make that better, with some success, but there is a long way to go yet. The dev-tools directory is an improvement over having that stuff scattered all over the place — at least it's actually thrown together — but it's not the end point.

Quoted 5 lines

It would be nice to provide a coherent overview, maybe provide some basic grouping as well.

It would be nice if there was kind of a gentle introduction to the tools, which ones you should be looking at, when, why, etc.

Total agreement. All we need is somebody to write it! :)

Thanks,

jon
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#25 lore raw

Re: [PATCH v3 15/18] Documentation: kunit: add documentation for KUnit

Sorry, to email so many people, but there are a lot of maintainers in this directory.

Quoted 9 lines · Jonathan Corbet
Quoted 2 lines · On Tue, 14 May 2019 16:19:02 -0700 Brendan Higgins <[email protected]>…

Hmmm...probably premature to bring this up, but Documentation/dev-tools/ is kind of thrown together.

Wait a minute, man... *I* created that directory, are you impugning my work? :)

What?! I would never! ;-)

Context for the people I just added: I proposed documentation for a new development tool. Jon very reasonably suggested it should go in Documentation/dev-tools/, which is not very well organized. This in turn prompted a discussion about cleaning it up.

Quoted 7 lines

But yes, "kind of thrown together" is a good description of much of Documentation/. A number of people have been working for years to make that better, with some success, but there is a long way to go yet. The dev-tools directory is an improvement over having that stuff scattered all over the place — at least it's actually thrown together — but it's not the end point.

Quoted 7 lines
Quoted 5 lines

It would be nice to provide a coherent overview, maybe provide some basic grouping as well.

It would be nice if there was kind of a gentle introduction to the tools, which ones you should be looking at, when, why, etc.

Total agreement. All we need is somebody to write it! :)

I wouldn't mind taking a stab at it in a later patchset.

My initial idea: there is a bunch more stuff that needs to be added here, so probably don't want to do it all at once.

I am thinking the first step is just to categorize things in a sensible manner so somebody doesn't look at the index and see *all the tools* immediately causing their eyes to glaze over. From first glances it looks like the users of these tools is going to be somewhat disjoint.

Maybe break things apart by who and how someone would use the tool. For example,

It looks like Coccinelle is going to be used primarily by people doing code janitor work and large scale changes.

Sparse seems like a presubmit tool.

gdb and kdb are likely used by everyone for debugging.

kselftest (and, if I get my way, KUnit) are used primarily people contributing new features (this is one I have more of a vested interest in, so I will leave it at that, but the point is: I think they would go together).

Most of the remaining tools (except gcov) look like the kind of long running tests that you point at a stable tree and let it sit and catch bugs. Super useful, but I don't think your average kernel dev is going to be trying to set it up or run it. Please correct me if I am wrong.

So that leaves gcov. I think it is awesome, but I am not sure how to categorize it. Definitely want some advice here.

Once everything is appropriately categorized by shape, in (a) subsequent patchset(s) we can tie each one in with a guide, not just on how to use the tool, but how the workflow looks for someone who uses that tool. For example, we might want to a guide on how to do large scale changes in the Linux kernel and have that tie in with Coccinelle. For kselftest and KUnit, we might want to provide a guide on how to test Linux kernel code, which would cover when and how to use each.

Anyway, just a vague sketch. Looking forward to hear what everyone thinks!
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#26 lore raw

PATCH v3 16/18 MAINTAINERS: add entry for KUnit the unit testing framework

In reply to Brendan Higgins

Add myself as maintainer of KUnit, the Linux kernel's unit testing framework.

---
Changes Since Last Revision:
- Added linux-kselftest@ as a mailing list entry for KUnit as requested by Shuah.

---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)
MAINTAINERS +11 -0
index 2c2fce72e694f..8a91887c8d541 100644
@@ -8448,6 +8448,17 @@ S:	Maintained
 F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*
 
+KERNEL UNIT TESTING FRAMEWORK (KUnit)
+M:	Brendan Higgins <[email protected]>
+L:	[email protected]
+L:	kunit-dev-/[email protected]
+W:	https://google.github.io/kunit-docs/third_party/kernel/docs/
+S:	Maintained
+F:	Documentation/kunit/
+F:	include/kunit/
+F:	kunit/
+F:	tools/testing/kunit/
+
 KERNEL USERMODE HELPER
 M:	Luis Chamberlain <[email protected]>
 L:	[email protected]
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#27 lore raw

PATCH v3 17/18 kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()

In reply to Brendan Higgins

From: Iurii Zaikin <[email protected]>

KUnit tests for initialized data behavior of proc_dointvec that is explicitly checked in the code. Includes basic parsing tests including int min/max overflow.

---
Changes Since Last Revision:
- Fixed integer overflow discovered by kbuild bot.

---
 kernel/Makefile      |   2 +
 kernel/sysctl-test.c | 293 +++++++++++++++++++++++++++++++++++++++++++
 lib/Kconfig.debug    |   6 +
 3 files changed, 301 insertions(+)
 create mode 100644 kernel/sysctl-test.c
kernel/Makefile +2 -0
index 6c57e78817dad..c81a8976b6a4b 100644
@@ -112,6 +112,8 @@ obj-$(CONFIG_HAS_IOMEM) += iomem.o
 obj-$(CONFIG_ZONE_DEVICE) += memremap.o
 obj-$(CONFIG_RSEQ) += rseq.o
 
+obj-$(CONFIG_SYSCTL_KUNIT_TEST) += sysctl-test.o
+
 obj-$(CONFIG_GCC_PLUGIN_STACKLEAK) += stackleak.o
 KASAN_SANITIZE_stackleak.o := n
 KCOV_INSTRUMENT_stackleak.o := n
kernel/sysctl-test.c new file +293 -0

293 lines not on this page · raw message

lib/Kconfig.debug +6 -0
index d5a4a4036d2f8..772af4ec70111 100644
@@ -1908,6 +1908,12 @@ config TEST_SYSCTL
 
 	  If unsure, say N.
 
+config SYSCTL_KUNIT_TEST
+	bool "KUnit test for sysctl"
+	depends on KUNIT
+	help
+	  Enables KUnit sysctl test.
+
 config TEST_UDELAY
 	tristate "udelay test driver"
 	help
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog
#28 lore raw

PATCH v3 18/18 MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section

In reply to Brendan Higgins

Add entry for the new proc sysctl KUnit test to the PROC SYSCTL section.

---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index 8a91887c8d541..2e539647589fd 100644
@@ -12526,6 +12526,7 @@ S:	Maintained
 F:	fs/proc/proc_sysctl.c
 F:	include/linux/sysctl.h
 F:	kernel/sysctl.c
+F:	kernel/sysctl-test.c
 F:	tools/testing/selftests/sysctl/
 
 PS3 NETWORK SUPPORT
Signature · 1 line
2.21.0.1020.gf2820cf01a-goog