sun50i: h6: Fix Beelink GS1 board config
PATCH 1/1 sun50i: h6: Fix Beelink GS1 board config
From: Clément Péron <[email protected]>
SPL_TEXT_BASE has been moved to Kconfig with commit:f89d6133ee configs: move CONFIG_SPL_TEXT_BASE to Kconfig
But Beelink GS1 config file has been introduced in the same time without this modification.
Fix this by settings the CONFIG_SPL_TEXT_BASE
--- configs/beelink_gs1_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
configs/beelink_gs1_defconfig +2 -1
@@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set -CONFIG_NR_DRAM_BANKS=1 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_TEXT_BASE=0x20060 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set
Signature · 1 line
2.17.1
PATCH 1/1 sun50i: h6: Fix Beelink GS1 board config
Quoted 22 lines · On Tue, May 14, 2019 at 11:56 PM <[email protected]> wrote:
From: Clément Péron <[email protected]>
SPL_TEXT_BASEhas been moved toKconfigwith commit:f89d6133eeconfigs: moveCONFIG_SPL_TEXT_BASEtoKconfigBut Beelink GS1 config file has been introduced in the same time without this modification.
Fix this by settings the
CONFIG_SPL_TEXT_BASESuggested-by Jonas Smedegaard <[email protected]>Signed-off-by Clément Péron <[email protected]>--- configs/beelink_gs1_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)configs/beelink_gs1_defconfig +0
-0
configs/beelink_gs1_defconfig line 8
Quoted 9 lines
configs/beelink_gs1_defconfig +1
-1@@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set -CONFIG_NR_DRAM_BANKS=1
Change changes seems different
PATCH 1/1 sun50i: h6: Fix Beelink GS1 board config
Hi Jagan,
Quoted 19 lines · Jagan Teki
Quoted 17 lines · On Tue, May 14, 2019 at 11:56 PM <[email protected]> wrote:
From: Clément Péron <[email protected]>
SPL_TEXT_BASEhas been moved toKconfigwith commit:f89d6133eeconfigs: moveCONFIG_SPL_TEXT_BASEtoKconfigBut Beelink GS1 config file has been introduced in the same time without this modification.
Fix this by settings the
CONFIG_SPL_TEXT_BASESuggested-by Jonas Smedegaard <[email protected]>Signed-off-by Clément Péron <[email protected]>--- configs/beelink_gs1_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Quoted 16 lines
Quoted 5 lines
configs/beelink_gs1_defconfig +0
-0configs/beelink_gs1_defconfig line 8
Quoted 9 lines
configs/beelink_gs1_defconfig +1
-1@@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set -CONFIG_NR_DRAM_BANKS=1Change changes seems different
This happens when I made the "make save_defconfig"
Do you want to split this in two commits ?
Regards,
Clément
PATCH 1/1 sun50i: h6: Fix Beelink GS1 board config
Quoted 40 lines · Clément Péron
Hi Jagan,
Quoted 19 lines · Jagan Teki
Quoted 17 lines · On Tue, May 14, 2019 at 11:56 PM <[email protected]> wrote:
From: Clément Péron <[email protected]>
SPL_TEXT_BASEhas been moved toKconfigwith commit:f89d6133eeconfigs: moveCONFIG_SPL_TEXT_BASEtoKconfigBut Beelink GS1 config file has been introduced in the same time without this modification.
Fix this by settings the
CONFIG_SPL_TEXT_BASESuggested-by Jonas Smedegaard <[email protected]>Signed-off-by Clément Péron <[email protected]>--- configs/beelink_gs1_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Quoted 16 lines
Quoted 5 lines
configs/beelink_gs1_defconfig +0
-0configs/beelink_gs1_defconfig line 8
Quoted 9 lines
configs/beelink_gs1_defconfig +1
-1@@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set -CONFIG_NR_DRAM_BANKS=1Change changes seems different
Quoted 3 lines
This happens when I made the "make
save_defconfig"Do you want to split this in two commits ?
I can drop that while applying, if you agree?
PATCH 1/1 sun50i: h6: Fix Beelink GS1 board config
Hi Jagan,
Quoted 42 lines · Jagan Teki
Quoted 40 lines · Clément Péron
Hi Jagan,
Quoted 35 lines · Jagan Teki
Quoted 22 lines · On Tue, May 14, 2019 at 11:56 PM <[email protected]> wrote:
From: Clément Péron <[email protected]>
SPL_TEXT_BASEhas been moved toKconfigwith commit:f89d6133eeconfigs: moveCONFIG_SPL_TEXT_BASEtoKconfigBut Beelink GS1 config file has been introduced in the same time without this modification.
Fix this by settings the
CONFIG_SPL_TEXT_BASESuggested-by Jonas Smedegaard <[email protected]>Signed-off-by Clément Péron <[email protected]>--- configs/beelink_gs1_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)configs/beelink_gs1_defconfig +0
-0configs/beelink_gs1_defconfig line 8
Quoted 9 lines
configs/beelink_gs1_defconfig +1
-1@@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set -CONFIG_NR_DRAM_BANKS=1Change changes seems different
Quoted 5 lines
Quoted 3 lines
This happens when I made the "make
save_defconfig"Do you want to split this in two commits ?
I can drop that while applying, if you agree?
Please do so,
Thanks,
Clément
PATCH 1/1 sun50i: h6: Fix Beelink GS1 board config
Quoted 52 lines · Clément Péron
Hi Jagan,
Quoted 47 lines · Jagan Teki
Quoted 40 lines · Clément Péron
Hi Jagan,
Quoted 19 lines · Jagan Teki
Quoted 17 lines · On Tue, May 14, 2019 at 11:56 PM <[email protected]> wrote:
From: Clément Péron <[email protected]>
SPL_TEXT_BASEhas been moved toKconfigwith commit:f89d6133eeconfigs: moveCONFIG_SPL_TEXT_BASEtoKconfigBut Beelink GS1 config file has been introduced in the same time without this modification.
Fix this by settings the
CONFIG_SPL_TEXT_BASESuggested-by Jonas Smedegaard <[email protected]>Signed-off-by Clément Péron <[email protected]>--- configs/beelink_gs1_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Quoted 16 lines
Quoted 5 lines
configs/beelink_gs1_defconfig +0
-0configs/beelink_gs1_defconfig line 8
Quoted 9 lines
configs/beelink_gs1_defconfig +1
-1@@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set -CONFIG_NR_DRAM_BANKS=1Change changes seems different
Quoted 3 lines
This happens when I made the "make
save_defconfig"Do you want to split this in two commits ?
I can drop that while applying, if you agree?
Applied to u-boot-sunxi/master