Skip to contentSkip to conversation

3.18.140-stable review

PATCH In review Greg Kroah-Hartman 5 participants 93 messages May 15, 2019 – May 16, 2019

Subsystems (4)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 3.18.140-stable review

This is the start of the stable review cycle for the 3.18.140 release. There are 86 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:45 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.140-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.18.140-rc1

Laurentiu Tudor <[email protected]>
powerpc/booke64: set RI in default MSR

Dan Carpenter <[email protected]>
drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl

Dan Carpenter <[email protected]>
drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl

Jarod Wilson <[email protected]>
bonding: fix arp_validate toggling in active-backup mode

David Ahern <[email protected]>
ipv4: Fix raw socket lookup for local traffic

Hangbin Liu <[email protected]>
vlan: disable SIOCSHWTSTAMP in container

YueHaibing <[email protected]>
packet: Fix error path in packet_init

Christophe Leroy <[email protected]>
net: ucc_geth - fix Oops when changing number of buffers in the ring

Tobin C. Harding <[email protected]>
bridge: Fix error path for kobject_init_and_add()

Johan Hovold <[email protected]>
USB: serial: fix unthrottle races

Oliver Neukum <[email protected]>
USB: serial: use variable for status

Nigel Croxon <[email protected]>
Don't jump to compute_result state from check_result state

Lucas Stach <[email protected]>
gpu: ipu-v3: dp: fix CSC handling

Po-Hsu Lin <[email protected]>
selftests/net: correct the return value for run_netsocktests

Arnd Bergmann <[email protected]>
s390: ctcm: fix ctcm_new_device error return code

Dan Williams <[email protected]>
init: initialize jump labels before command line option parsing

Rikard Falkeborn <[email protected]>
tools lib traceevent: Fix missing equality check for strcmp

Vitaly Kuznetsov <[email protected]>
KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing

Martin Schwidefsky <[email protected]>

    s390/3270: fix lockdep false positive on view->lock

Peter Oberparleiter <[email protected]>
s390/dasd: Fix capacity calculation for large volumes

Dmitry Torokhov <[email protected]>
HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys

Sven Van Asbroeck <[email protected]>
iio: adc: xilinx: fix potential use-after-free on remove

Gustavo A. R. Silva <[email protected]>
platform/x86: sony-laptop: Fix unintentional fall-through

Francesco Ruggeri <[email protected]>
netfilter: compat: initialize all fields in xt_init

Ben Hutchings <[email protected]>
timer/debug: Change /proc/timer_stats from 0644 to 0600

Marcel Holtmann <[email protected]>
Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

Young Xiao <[email protected]>
Bluetooth: hidp: fix buffer overflow

Andrew Vasquez <[email protected]>
scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines

Prasad Sodagudi <[email protected]>
genirq: Prevent use-after-free and work list corruption

Joerg Roedel <[email protected]>
iommu/amd: Set exclusion range correctly

Varun Prakash <[email protected]>
scsi: csiostor: fix missing data copy in csio_scsi_err_handler()

Annaliese McDermond <[email protected]>
ASoC: tlv320aic32x4: Fix Common Pins

Daniel Mack <[email protected]>
ASoC: cs4270: Set auto-increment bit for register writes

Rander Wang <[email protected]>
ASoC:soc-pcm:fix a codec fixup issue in TDM case

Jason Yan <[email protected]>
scsi: libsas: fix a race condition when smp task timeout

Jacopo Mondi <[email protected]>
media: v4l2: i2c: ov7670: Fix PLL bypass register values

Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix the dac write calculation

Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix the dac read calculation

Jeremy Fertic <[email protected]>
staging: iio: adt7316: allow adt751x to use internal vref for all dacs

Malte Leip <[email protected]>
usb: usbip: fix isoc packet num validation in get_pipe

Arnd Bergmann <[email protected]>
ARM: iop: don't use using 64-bit DMA masks

Arnd Bergmann <[email protected]>
ARM: orion: don't use using 64-bit DMA masks

Guenter Roeck <[email protected]>
xsysace: Fix error handling in ace_setup

Mike Kravetz <[email protected]>
hugetlbfs: fix memory leak for resv_map

Michael Kelley <[email protected]>
scsi: storvsc: Fix calculation of sub-channel count

Al Viro <[email protected]>
jffs2: fix use-after-free on symlink traversal

Konstantin Khorenko <[email protected]>
bonding: show full hw address in sysfs for slave entries

Arvind Sankar <[email protected]>
igb: Fix WARN_ONCE on runtime suspend

Geert Uytterhoeven <[email protected]>
rtc: sh: Fix invalid alarm warning for non-enabled alarm

He, Bo <[email protected]>
HID: debug: fix race condition with between rdesc_show() and device removal

Alan Stern <[email protected]>
USB: core: Fix bug caused by duplicate interface PM usage counter

Greg Kroah-Hartman <[email protected]>
USB: media: disable tlg2300 driver

Alan Stern <[email protected]>
USB: core: Fix unterminated string returned by usb_string()

Alan Stern <[email protected]>
USB: w1 ds2490: Fix bug caused by improper use of altsetting array

Alan Stern <[email protected]>
USB: yurex: Fix protection fault after device removal

Eric Dumazet <[email protected]>
ipv6/flowlabel: wait rcu grace period before put_pid()

Willem de Bruijn <[email protected]>
packet: validate msg_namelen in send directly

Willem de Bruijn <[email protected]>
ipv6: invert flowlabel sharing check in process and user mode

Shmulik Ladkani <[email protected]>
ipv4: ip_do_fragment: Preserve skb_iif during fragmentation

Changbin Du <[email protected]>
kconfig/[mn]conf: handle backspace (^H) key

raymond pang <[email protected]>
libata: fix using DMA buffers on stack

Steffen Maier <[email protected]>
scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN

Al Viro <[email protected]>
ceph: fix use-after-free on symlink traversal

Mukesh Ojha <[email protected]>
usb: u132-hcd: fix resource leak

Kangjie Lu <[email protected]>
scsi: qla4xxx: fix a potential NULL pointer dereference

Wen Yang <[email protected]>
net: ibm: fix possible object reference leak

Lukas Wunner <[email protected]>
net: ks8851: Set initial carrier state to down

Lukas Wunner <[email protected]>
net: ks8851: Delay requesting IRQ until opened

Lukas Wunner <[email protected]>
net: ks8851: Reassert reset pin if chip ID check fails

Lukas Wunner <[email protected]>
net: ks8851: Dequeue RX packets explicitly

Guido Kiener <[email protected]>

    usb: gadget: net2272: Fix net2272_dequeue()

Guido Kiener <[email protected]>
usb: gadget: net2280: Fix overrun of OUT messages

Aditya Pakki <[email protected]>
qlcnic: Avoid potential NULL pointer dereference

Vinod Koul <[email protected]>
net: stmmac: move stmmac_check_ether_addr() to driver probe

Hangbin Liu <[email protected]>
team: fix possible recursive locking when add slaves

Eric Dumazet <[email protected]>
ipv4: add sanity checks in ipv4_link_failure()

Greg Kroah-Hartman <[email protected]>
Revert "block/loop: Use global lock for ioctl() operation."

Florian Westphal <[email protected]>
netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON

Tetsuo Handa <[email protected]>

    NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.

YueHaibing <[email protected]>
fs/proc/proc_sysctl.c: Fix a NULL pointer dereference

Linus Torvalds <[email protected]>
slip: make slhc_free() silently accept an error pointer

NeilBrown <[email protected]>
sunrpc: don't mark uninitialised items as VALID.

Jeff Layton <[email protected]>
ceph: ensure d_name stability in ceph_dentry_hash()

Xie XiuQi <[email protected]>
sched/numa: Fix a possible divide-by-zero

Peter Zijlstra <[email protected]>
trace: Fix preempt_enable_no_resched() abuse

Aurelien Jarno <[email protected]>
MIPS: scall64-o32: Fix indirect syscall number load

-------------

Diffstat:

 Documentation/usb/power-management.txt             | 14 ++++--
 Makefile                                           |  4 +-
 arch/arm/mach-iop13xx/setup.c                      |  8 +--
 arch/arm/mach-iop13xx/tpmi.c                       | 10 ++--
 arch/arm/plat-iop/adma.c                           |  6 +--
 arch/arm/plat-orion/common.c                       |  4 +-
 arch/mips/kernel/scall64-o32.S                     |  2 +-
 arch/powerpc/include/asm/reg_booke.h               |  2 +-
 arch/x86/kvm/trace.h                               |  4 +-
 drivers/ata/libata-zpodd.c                         | 34 +++++++++----
 drivers/block/loop.c                               | 47 +++++++++---------
 drivers/block/loop.h                               |  1 +
 drivers/block/xsysace.c                            |  2 +
 drivers/gpu/ipu-v3/ipu-dp.c                        | 12 +++--
 drivers/hid/hid-debug.c                            |  5 ++
 drivers/hid/hid-input.c                            |  4 ++
 drivers/iio/adc/xilinx-xadc-core.c                 |  2 +-
 drivers/iommu/amd_iommu_init.c                     |  2 +-
 drivers/md/raid5.c                                 | 19 ++------
 drivers/media/i2c/ov7670.c                         | 16 +++---
 drivers/media/usb/tlg2300/Kconfig                  |  1 +
 drivers/net/bonding/bond_options.c                 |  7 ---
 drivers/net/bonding/bond_sysfs_slave.c             |  4 +-
 drivers/net/ethernet/freescale/ucc_geth_ethtool.c  |  8 ++-
 drivers/net/ethernet/ibm/ehea/ehea_main.c          |  1 +
 drivers/net/ethernet/intel/igb/e1000_defines.h     |  2 +
 drivers/net/ethernet/intel/igb/igb_main.c          | 57 +++-------------------
 drivers/net/ethernet/micrel/ks8851.c               | 36 +++++++-------
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |  2 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  4 +-
 drivers/net/slip/slhc.c                            |  2 +-
 drivers/net/team/team.c                            |  6 +++
 drivers/platform/x86/sony-laptop.c                 |  8 +--
 drivers/rtc/rtc-sh.c                               |  2 +-
 drivers/s390/block/dasd_eckd.c                     |  6 +--
 drivers/s390/char/con3270.c                        |  2 +-
 drivers/s390/char/fs3270.c                         |  3 +-
 drivers/s390/char/raw3270.c                        |  3 +-
 drivers/s390/char/raw3270.h                        |  4 +-
 drivers/s390/char/tty3270.c                        |  3 +-
 drivers/s390/net/ctcm_main.c                       |  1 +
 drivers/s390/scsi/zfcp_fc.c                        | 21 ++++++--
 drivers/scsi/csiostor/csio_scsi.c                  |  5 +-
 drivers/scsi/libsas/sas_expander.c                 |  9 ++--
 drivers/scsi/qla2xxx/qla_attr.c                    |  4 +-
 drivers/scsi/qla4xxx/ql4_os.c                      |  2 +
 drivers/scsi/storvsc_drv.c                         | 13 ++++-
 drivers/staging/iio/addac/adt7316.c                | 22 ++++++---
 drivers/usb/core/driver.c                          | 13 -----
 drivers/usb/core/message.c                         |  4 +-
 drivers/usb/gadget/udc/net2272.c                   |  1 +
 drivers/usb/gadget/udc/net2280.c                   |  4 +-
 drivers/usb/host/u132-hcd.c                        |  3 ++
 drivers/usb/misc/yurex.c                           |  1 +
 drivers/usb/serial/generic.c                       | 57 ++++++++++++++++------
 drivers/usb/storage/realtek_cr.c                   | 13 ++---
 drivers/usb/usbip/stub_rx.c                        | 18 ++-----
 drivers/usb/usbip/usbip_common.h                   |  7 +++
 drivers/virt/fsl_hypervisor.c                      | 29 ++++++-----
 drivers/w1/masters/ds2490.c                        |  6 +--
 fs/ceph/dir.c                                      |  6 ++-
 fs/ceph/inode.c                                    |  2 +-
 fs/hugetlbfs/inode.c                               | 20 +++++---
 fs/jffs2/readinode.c                               |  5 --
 fs/jffs2/super.c                                   |  5 +-
 fs/nfs/super.c                                     |  3 +-
 fs/proc/proc_sysctl.c                              |  6 ++-
 include/linux/usb.h                                |  2 -
 include/net/bluetooth/hci_core.h                   |  3 ++
 init/main.c                                        |  4 +-
 kernel/irq/manage.c                                |  4 +-
 kernel/sched/fair.c                                |  4 ++
 kernel/time/timer_stats.c                          |  2 +-
 kernel/trace/ring_buffer.c                         |  2 +-
 net/8021q/vlan_dev.c                               |  4 +-
 net/bluetooth/hci_conn.c                           |  8 +++
 net/bluetooth/hidp/sock.c                          |  1 +
 net/bridge/br_if.c                                 | 13 +++--
 net/bridge/netfilter/ebtables.c                    |  3 +-
 net/ipv4/ip_output.c                               |  1 +
 net/ipv4/raw.c                                     |  4 +-
 net/ipv4/route.c                                   | 32 ++++++++----
 net/ipv6/ip6_flowlabel.c                           | 23 +++++----
 net/netfilter/x_tables.c                           |  2 +-
 net/packet/af_packet.c                             | 48 ++++++++++++------
 net/sunrpc/cache.c                                 |  3 ++
 scripts/kconfig/lxdialog/inputbox.c                |  3 +-
 scripts/kconfig/nconf.c                            |  2 +-
 scripts/kconfig/nconf.gui.c                        |  3 +-
 sound/soc/codecs/cs4270.c                          |  1 +
 sound/soc/codecs/tlv320aic32x4.c                   |  2 +
 sound/soc/soc-pcm.c                                |  7 ++-
 tools/lib/traceevent/event-parse.c                 |  2 +-
 tools/testing/selftests/net/run_netsocktests       |  2 +-
 94 files changed, 474 insertions(+), 350 deletions(-)
author maintainer
#1 lore raw

PATCH 1/86 MIPS: scall64-o32: Fix indirect syscall number load

From: Aurelien Jarno <[email protected]>

commit 79b4a9cf0e2ea8203ce777c8d5cfa86c71eae86e upstream.

Commit 4c21b8fd8f14 (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64, but it did not work correctly for big endian kernel/processes. The reason is that the syscall number is loaded from ARG1 using the lw instruction while this is a 64-bit value, so zero is loaded instead of the syscall number.

Fix the code by using the ld instruction instead. When running a 32-bit processes on a 64 bit CPU, the values are properly sign-extended, so it ensures the value passed to syscall_trace_enter is correct.

Recent systemd versions with seccomp enabled whitelist the getpid syscall for their internal processes (e.g. systemd-journald), but call it through syscall(SYS_getpid). This fix therefore allows O32 big endian systems with a 64-bit kernel to run recent systemd versions.

---
 arch/mips/kernel/scall64-o32.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/kernel/scall64-o32.S +1 -1
@@ -124,7 +124,7 @@ trace_a_syscall:
 	subu	t1, v0,  __NR_O32_Linux
 	move	a1, v0
 	bnez	t1, 1f /* __NR_syscall at offset 0 */
-	lw	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
+	ld	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
 	.set	pop
 
 1:	jal	syscall_trace_enter
author maintainer
#2 lore raw

PATCH 2/86 trace: Fix preempt_enable_no_resched() abuse

In reply to Greg Kroah-Hartman

From: Peter Zijlstra <[email protected]>

commit d6097c9e4454adf1f8f2c9547c2fa6060d55d952 upstream.

Unless the very next line is schedule(), or implies it, one must not use preempt_enable_no_resched(). It can cause a preemption to go missing and thereby cause arbitrary delays, breaking the PREEMPT=y invariant.

Cc Waiman Long <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Will Deacon <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc the arch/x86 maintainers <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Tim Chen <[email protected]>
Cc huang ying <[email protected]>
Cc Roman Gushchin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Daniel Borkmann <[email protected]>
Fixes 2c2d7329d8af ("tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()")
---
 kernel/trace/ring_buffer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/ring_buffer.c +1 -1
@@ -730,7 +730,7 @@ u64 ring_buffer_time_stamp(struct ring_b
 
 	preempt_disable_notrace();
 	time = rb_time_stamp(buffer);
-	preempt_enable_no_resched_notrace();
+	preempt_enable_notrace();
 
 	return time;
 }
author maintainer
#3 lore raw

PATCH 3/86 sched/numa: Fix a possible divide-by-zero

In reply to Greg Kroah-Hartman

From: Xie XiuQi <[email protected]>

commit a860fa7b96e1a1c974556327aa1aee852d434c21 upstream.

sched_clock_cpu() may not be consistent between CPUs. If a task migrates to another CPU, then se.exec_start is set to that CPU's rq_clock_task() by update_stats_curr_start(). Specifically, the new value might be before the old value due to clock skew.

So then if in numa_get_avg_runtime() the expression:

'now - p->last_task_numa_placement'

ends up as -1, then the divider '*period + 1' in task_numa_placement() is 0 and things go bang. Similar to update_curr(), check if time goes backwards to avoid this.

[ peterz: Wrote new changelog. ]
[ mingo: Tweaked the code comment. ]

---
 kernel/sched/fair.c |    4 ++++
 1 file changed, 4 insertions(+)
kernel/sched/fair.c +4 -0
@@ -1569,6 +1569,10 @@ static u64 numa_get_avg_runtime(struct t
 	if (p->last_task_numa_placement) {
 		delta = runtime - p->last_sum_exec_runtime;
 		*period = now - p->last_task_numa_placement;
+
+		/* Avoid time going backwards, prevent potential divide error: */
+		if (unlikely((s64)*period < 0))
+			*period = 0;
 	} else {
 		delta = p->se.avg.runnable_avg_sum;
 		*period = p->se.avg.runnable_avg_period;
author maintainer
#4 lore raw

PATCH 4/86 ceph: ensure d_name stability in ceph_dentry_hash()

In reply to Greg Kroah-Hartman

From: Jeff Layton <[email protected]>

commit 76a495d666e5043ffc315695f8241f5e94a98849 upstream.

Take the d_lock here to ensure that d_name doesn't change.

---
 fs/ceph/dir.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/ceph/dir.c +5 -1
@@ -1308,6 +1308,7 @@ void ceph_dentry_lru_del(struct dentry *
 unsigned ceph_dentry_hash(struct inode *dir, struct dentry *dn)
 {
 	struct ceph_inode_info *dci = ceph_inode(dir);
+	unsigned hash;
 
 	switch (dci->i_dir_layout.dl_dir_hash) {
 	case 0:	/* for backward compat */
@@ -1315,8 +1316,11 @@ unsigned ceph_dentry_hash(struct inode *
 		return dn->d_name.hash;
 
 	default:
-		return ceph_str_hash(dci->i_dir_layout.dl_dir_hash,
+		spin_lock(&dn->d_lock);
+		hash = ceph_str_hash(dci->i_dir_layout.dl_dir_hash,
 				     dn->d_name.name, dn->d_name.len);
+		spin_unlock(&dn->d_lock);
+		return hash;
 	}
 }
 
author maintainer
#5 lore raw

PATCH 5/86 sunrpc: dont mark uninitialised items as VALID.

In reply to Greg Kroah-Hartman

From: NeilBrown <[email protected]>

commit d58431eacb226222430940134d97bfd72f292fcd upstream.

A recent commit added a call to cache_fresh_locked() when an expired item was found.
The call sets the CACHE_VALID flag, so it is important that the item actually is valid.
There are two ways it could be valid:
1/ If ->update has been called to fill in relevant content 2/ if CACHE_NEGATIVE is set, to say that content doesn't exist.

An expired item that is waiting for an update will be neither. Setting CACHE_VALID will mean that a subsequent call to cache_put() will be likely to dereference uninitialised pointers.

So we must make sure the item is valid, and we already have code to do that in try_to_negate_entry(). This takes the hash lock and so cannot be used directly, so take out the two lines that we need and use them.

Now cache_fresh_locked() is certain to be called only on a valid item.

Cc [email protected] # 2.6.35
Fixes 4ecd55ea0742 ("sunrpc: fix cache_head leak due to queued request")
---
 net/sunrpc/cache.c |    3 +++
 1 file changed, 3 insertions(+)
net/sunrpc/cache.c +3 -0
@@ -50,6 +50,7 @@ static void cache_init(struct cache_head
 	h->last_refresh = now;
 }
 
+static inline int cache_is_valid(struct cache_head *h);
 static void cache_fresh_locked(struct cache_head *head, time_t expiry);
 static void cache_fresh_unlocked(struct cache_head *head,
 				struct cache_detail *detail);
@@ -98,6 +99,8 @@ struct cache_head *sunrpc_cache_lookup(s
 				*hp = tmp->next;
 				tmp->next = NULL;
 				detail->entries --;
+				if (cache_is_valid(tmp) == -EAGAIN)
+					set_bit(CACHE_NEGATIVE, &tmp->flags);
 				cache_fresh_locked(tmp, 0);
 				freeme = tmp;
 				break;
author maintainer
#6 lore raw

PATCH 6/86 slip: make slhc_free() silently accept an error pointer

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

commit baf76f0c58aec435a3a864075b8f6d8ee5d1f17e upstream.

This way, slhc_free() accepts what slhc_init() returns, whether that is an error or not.

In particular, the pattern in sl_alloc_bufs() is

        slcomp = slhc_init(16, 16);
        ...
        slhc_free(slcomp);

for the error handling path, and rather than complicate that code, just make it ok to always free what was returned by the init function.

That's what the code used to do before commit 4ab42d78e37a ("ppp, slip:
Validate VJ compression slot parameters completely") when slhc_init() just returned NULL for the error case, with no actual indication of the details of the error.

Reported-by [email protected]
Fixes 4ab42d78e37a ("ppp, slip: Validate VJ compression slot parameters completely")
Cc David Miller <[email protected]>
---
 drivers/net/slip/slhc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/slip/slhc.c +1 -1
@@ -153,7 +153,7 @@ out_fail:
 void
 slhc_free(struct slcompress *comp)
 {
-	if ( comp == NULLSLCOMPR )
+	if ( IS_ERR_OR_NULL(comp) )
 		return;
 
 	if ( comp->tstate != NULLSLSTATE )
author maintainer
#7 lore raw

PATCH 7/86 fs/proc/proc_sysctl.c: Fix a NULL pointer dereference

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

commit 89189557b47b35683a27c80ee78aef18248eefb4 upstream.

Syzkaller report this:

sysctl could not get directory: /net//bridge -12
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access

  general protection fault: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 7027 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  RIP: 0010:__write_once_size include/linux/compiler.h:220 [inline]
  RIP: 0010:__rb_change_child include/linux/rbtree_augmented.h:144 [inline]
  RIP: 0010:__rb_erase_augmented include/linux/rbtree_augmented.h:186 [inline]
  RIP: 0010:rb_erase+0x5f4/0x19f0 lib/rbtree.c:459
  Code: 00 0f 85 60 13 00 00 48 89 1a 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 0c 00 00 4d 85 ed 4c 89 2e 74 ce 4c 89 ea 48
  RSP: 0018:ffff8881bb507778 EFLAGS: 00010206
  RAX: dffffc0000000000 RBX: ffff8881f224b5b8 RCX: ffffffff818f3f6a
  RDX: 000000000000000a RSI: 0000000000000050 RDI: ffff8881f224b568
  RBP: 0000000000000000 R08: ffffed10376a0ef4 R09: ffffed10376a0ef4
  R10: 0000000000000001 R11: ffffed10376a0ef4 R12: ffff8881f224b558
  R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  FS:  00007f3e7ce13700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fd60fbe9398 CR3: 00000001cb55c001 CR4: 00000000007606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   erase_entry fs/proc/proc_sysctl.c:178 [inline]
   erase_header+0xe3/0x160 fs/proc/proc_sysctl.c:207
   start_unregistering fs/proc/proc_sysctl.c:331 [inline]
   drop_sysctl_table+0x558/0x880 fs/proc/proc_sysctl.c:1631
   get_subdir fs/proc/proc_sysctl.c:1022 [inline]
   __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335
   br_netfilter_init+0x68/0x1000 [br_netfilter]
   do_one_initcall+0xbc/0x47d init/main.c:901
   do_init_module+0x1b5/0x547 kernel/module.c:3456
   load_module+0x6405/0x8c10 kernel/module.c:3804
   __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  Modules linked in: br_netfilter(+) backlight comedi(C) hid_sensor_hub max3100 ti_ads8688 udc_core fddi snd_mona leds_gpio rc_streamzap mtd pata_netcell nf_log_common rc_winfast udp_tunnel snd_usbmidi_lib snd_usb_toneport snd_usb_line6 snd_rawmidi snd_seq_device snd_hwdep videobuf2_v4l2 videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops rc_gadmei_rm008z 8250_of smm665 hid_tmff hid_saitek hwmon_vid rc_ati_tv_wonder_hd_600 rc_core pata_pdc202xx_old dn_rtmsg as3722 ad714x_i2c ad714x snd_soc_cs4265 hid_kensington panel_ilitek_ili9322 drm drm_panel_orientation_quirks ipack cdc_phonet usbcore phonet hid_jabra hid extcon_arizona can_dev industrialio_triggered_buffer kfifo_buf industrialio adm1031 i2c_mux_ltc4306 i2c_mux ipmi_msghandler mlxsw_core snd_soc_cs35l34 snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer ac97_bus snd_compress snd soundcore gpio_da9055 uio ecdh_generic mdio_thunder of_mdio fixed_phy libphy mdio_cavium iptable_security iptable_raw iptable_mangle
   iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel ide_pci_generic piix aes_x86_64 crypto_simd cryptd ide_core glue_helper input_leds psmouse intel_agp intel_gtt serio_raw ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: br_netfilter]
  Dumping ftrace buffer:
     (ftrace buffer empty)
  ---[ end trace 68741688d5fbfe85 ]---

commit 23da9588037e ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") forgot to handle start_unregistering() case, while header->parent is NULL, it calls erase_header() and as seen in the above syzkaller call trace, accessing &header->parent->root will trigger a NULL pointer dereference.

As that commit explained, there is also no need to call start_unregistering() if header->parent is NULL.

Fixes 23da9588037e ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links")
Fixes 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets")
Cc Luis Chamberlain <[email protected]>
Cc Alexey Dobriyan <[email protected]>
Cc Al Viro <[email protected]>
Cc "Eric W. Biederman" <[email protected]>
---
 fs/proc/proc_sysctl.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/proc/proc_sysctl.c +4 -2
@@ -1512,9 +1512,11 @@ static void drop_sysctl_table(struct ctl
 	if (--header->nreg)
 		return;
 
-	if (parent)
+	if (parent) {
 		put_links(header);
-	start_unregistering(header);
+		start_unregistering(header);
+	}
+
 	if (!--header->count)
 		kfree_rcu(header, rcu);
 
author maintainer
#8 lore raw

PATCH 8/86 NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.

In reply to Greg Kroah-Hartman

From: Tetsuo Handa <[email protected]>

commit 7c2bd9a39845bfb6d72ddb55ce737650271f6f96 upstream.

syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family (which is embedded into user-visible "struct nfs_mount_data" structure) despite nfs23_validate_mount_data() cannot pass sizeof(struct sockaddr_in6) bytes of AF_INET6 address to rpc_sockaddr2uaddr().

Since "struct nfs_mount_data" structure is user-visible, we can't change "struct nfs_mount_data" to use "struct sockaddr_storage". Therefore, assuming that everybody is using AF_INET family when passing address via "struct nfs_mount_data"->addr, reject if its sin_family is not AF_INET.

[1] https://syzkaller.appspot.com/bug?id=599993614e7cbbf66bc2656a919ab2a95fb5d75c

---
 fs/nfs/super.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/nfs/super.c +2 -1
@@ -2019,7 +2019,8 @@ static int nfs23_validate_mount_data(voi
 		memcpy(sap, &data->addr, sizeof(data->addr));
 		args->nfs_server.addrlen = sizeof(data->addr);
 		args->nfs_server.port = ntohs(data->addr.sin_port);
-		if (!nfs_verify_server_address(sap))
+		if (sap->sa_family != AF_INET ||
+		    !nfs_verify_server_address(sap))
 			goto out_no_address;
 
 		if (!(data->flags & NFS_MOUNT_TCP))
author maintainer
#9 lore raw

PATCH 9/86 netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 7caa56f006e9d712b44f27b32520c66420d5cbc6 upstream.

It means userspace gave us a ruleset where there is some other data after the ebtables target but before the beginning of the next rule.

Fixes 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by [email protected]
---
 net/bridge/netfilter/ebtables.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/bridge/netfilter/ebtables.c +2 -1
@@ -2042,7 +2042,8 @@ static int ebt_size_mwt(struct compat_eb
 		if (match_kern)
 			match_kern->match_size = ret;
 
-		if (WARN_ON(type == EBT_COMPAT_TARGET && size_left))
+		/* rule should have no remaining data after target */
+		if (type == EBT_COMPAT_TARGET && size_left)
 			return -EINVAL;
 
 		match32 = (struct compat_ebt_entry_mwt *) buf;
author maintainer
#10 lore raw

PATCH 10/86 Revert "block/loop: Use global lock for ioctl() operation."

In reply to Greg Kroah-Hartman

From: Greg Kroah-Hartman <[email protected]>

This reverts commit a17189a0e107ee316b3fff61217f5a037357d65e which is commit 310ca162d779efee8a2dc3731439680f3e9c1e86 upstream.

Jan Kara has reported seeing problems with this patch applied, as has Salvatore Bonaccorso, so let's drop it for now.

---
 drivers/block/loop.c |   47 +++++++++++++++++++++++------------------------
 drivers/block/loop.h |    1 +
 2 files changed, 24 insertions(+), 24 deletions(-)
drivers/block/loop.c +23 -24
@@ -81,7 +81,6 @@
 
 static DEFINE_IDR(loop_index_idr);
 static DEFINE_MUTEX(loop_index_mutex);
-static DEFINE_MUTEX(loop_ctl_mutex);
 
 static int max_part;
 static int part_shift;
@@ -1013,7 +1012,7 @@ static int loop_clr_fd(struct loop_devic
 	 */
 	if (lo->lo_refcnt > 1) {
 		lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
-		mutex_unlock(&loop_ctl_mutex);
+		mutex_unlock(&lo->lo_ctl_mutex);
 		return 0;
 	}
 
@@ -1062,12 +1061,12 @@ static int loop_clr_fd(struct loop_devic
 	lo->lo_flags = 0;
 	if (!part_shift)
 		lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
-	mutex_unlock(&loop_ctl_mutex);
+	mutex_unlock(&lo->lo_ctl_mutex);
 	/*
-	 * Need not hold loop_ctl_mutex to fput backing file.
-	 * Calling fput holding loop_ctl_mutex triggers a circular
+	 * Need not hold lo_ctl_mutex to fput backing file.
+	 * Calling fput holding lo_ctl_mutex triggers a circular
 	 * lock dependency possibility warning as fput can take
-	 * bd_mutex which is usually taken before loop_ctl_mutex.
+	 * bd_mutex which is usually taken before lo_ctl_mutex.
 	 */
 	fput(filp);
 	return 0;
@@ -1301,7 +1300,7 @@ static int lo_ioctl(struct block_device
 	struct loop_device *lo = bdev->bd_disk->private_data;
 	int err;
 
-	mutex_lock_nested(&loop_ctl_mutex, 1);
+	mutex_lock_nested(&lo->lo_ctl_mutex, 1);
 	switch (cmd) {
 	case LOOP_SET_FD:
 		err = loop_set_fd(lo, mode, bdev, arg);
@@ -1310,7 +1309,7 @@ static int lo_ioctl(struct block_device
 		err = loop_change_fd(lo, bdev, arg);
 		break;
 	case LOOP_CLR_FD:
-		/* loop_clr_fd would have unlocked loop_ctl_mutex on success */
+		/* loop_clr_fd would have unlocked lo_ctl_mutex on success */
 		err = loop_clr_fd(lo);
 		if (!err)
 			goto out_unlocked;
@@ -1341,7 +1340,7 @@ static int lo_ioctl(struct block_device
 	default:
 		err = lo->ioctl ? lo->ioctl(lo, cmd, arg) : -EINVAL;
 	}
-	mutex_unlock(&loop_ctl_mutex);
+	mutex_unlock(&lo->lo_ctl_mutex);
 
 out_unlocked:
 	return err;
@@ -1474,16 +1473,16 @@ static int lo_compat_ioctl(struct block_
 
 	switch(cmd) {
 	case LOOP_SET_STATUS:
-		mutex_lock(&loop_ctl_mutex);
+		mutex_lock(&lo->lo_ctl_mutex);
 		err = loop_set_status_compat(
 			lo, (const struct compat_loop_info __user *) arg);
-		mutex_unlock(&loop_ctl_mutex);
+		mutex_unlock(&lo->lo_ctl_mutex);
 		break;
 	case LOOP_GET_STATUS:
-		mutex_lock(&loop_ctl_mutex);
+		mutex_lock(&lo->lo_ctl_mutex);
 		err = loop_get_status_compat(
 			lo, (struct compat_loop_info __user *) arg);
-		mutex_unlock(&loop_ctl_mutex);
+		mutex_unlock(&lo->lo_ctl_mutex);
 		break;
 	case LOOP_SET_CAPACITY:
 	case LOOP_CLR_FD:
@@ -1514,9 +1513,9 @@ static int lo_open(struct block_device *
 		goto out;
 	}
 
-	mutex_lock(&loop_ctl_mutex);
+	mutex_lock(&lo->lo_ctl_mutex);
 	lo->lo_refcnt++;
-	mutex_unlock(&loop_ctl_mutex);
+	mutex_unlock(&lo->lo_ctl_mutex);
 out:
 	mutex_unlock(&loop_index_mutex);
 	return err;
@@ -1526,7 +1525,7 @@ static void __lo_release(struct loop_dev
 {
 	int err;
 
-	mutex_lock(&loop_ctl_mutex);
+	mutex_lock(&lo->lo_ctl_mutex);
 
 	if (--lo->lo_refcnt)
 		goto out;
@@ -1548,7 +1547,7 @@ static void __lo_release(struct loop_dev
 	}
 
 out:
-	mutex_unlock(&loop_ctl_mutex);
+	mutex_unlock(&lo->lo_ctl_mutex);
 }
 
 static void lo_release(struct gendisk *disk, fmode_t mode)
@@ -1594,10 +1593,10 @@ static int unregister_transfer_cb(int id
 	struct loop_device *lo = ptr;
 	struct loop_func_table *xfer = data;
 
-	mutex_lock(&loop_ctl_mutex);
+	mutex_lock(&lo->lo_ctl_mutex);
 	if (lo->lo_encryption == xfer)
 		loop_release_xfer(lo);
-	mutex_unlock(&loop_ctl_mutex);
+	mutex_unlock(&lo->lo_ctl_mutex);
 	return 0;
 }
 
@@ -1678,7 +1677,7 @@ static int loop_add(struct loop_device *
 	if (!part_shift)
 		disk->flags |= GENHD_FL_NO_PART_SCAN;
 	disk->flags |= GENHD_FL_EXT_DEVT;
-	mutex_init(&loop_ctl_mutex);
+	mutex_init(&lo->lo_ctl_mutex);
 	lo->lo_number		= i;
 	lo->lo_thread		= NULL;
 	init_waitqueue_head(&lo->lo_event);
@@ -1790,19 +1789,19 @@ static long loop_control_ioctl(struct fi
 		ret = loop_lookup(&lo, parm);
 		if (ret < 0)
 			break;
-		mutex_lock(&loop_ctl_mutex);
+		mutex_lock(&lo->lo_ctl_mutex);
 		if (lo->lo_state != Lo_unbound) {
 			ret = -EBUSY;
-			mutex_unlock(&loop_ctl_mutex);
+			mutex_unlock(&lo->lo_ctl_mutex);
 			break;
 		}
 		if (lo->lo_refcnt > 0) {
 			ret = -EBUSY;
-			mutex_unlock(&loop_ctl_mutex);
+			mutex_unlock(&lo->lo_ctl_mutex);
 			break;
 		}
 		lo->lo_disk->private_data = NULL;
-		mutex_unlock(&loop_ctl_mutex);
+		mutex_unlock(&lo->lo_ctl_mutex);
 		idr_remove(&loop_index_idr, lo->lo_number);
 		loop_remove(lo);
 		break;
drivers/block/loop.h +1 -0
@@ -55,6 +55,7 @@ struct loop_device {
 	struct bio_list		lo_bio_list;
 	unsigned int		lo_bio_count;
 	int			lo_state;
+	struct mutex		lo_ctl_mutex;
 	struct task_struct	*lo_thread;
 	wait_queue_head_t	lo_event;
 	/* wait queue for incoming requests */
author maintainer
#11 lore raw

PATCH 11/86 ipv4: add sanity checks in ipv4_link_failure()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 20ff83f10f113c88d0bb74589389b05250994c16 ]

Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head.

RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204

CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:133
 memcpy include/linux/string.h:355 [inline]
 __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
 dst_link_failure include/net/dst.h:427 [inline]
 vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
 vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
 __netdev_start_xmit include/linux/netdevice.h:4414 [inline]
 netdev_start_xmit include/linux/netdevice.h:4423 [inline]
 xmit_one net/core/dev.c:3292 [inline]
 dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
 neigh_output include/net/neighbour.h:508 [inline]
 ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:289 [inline]
 raw_send_hdrinc net/ipv4/raw.c:432 [inline]
 raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 sock_write_iter+0x27c/0x3e0 net/socket.c:988
 call_write_iter include/linux/fs.h:1866 [inline]
 new_sync_write+0x4c7/0x760 fs/read_write.c:474
 __vfs_write+0xe4/0x110 fs/read_write.c:487
 vfs_write+0x20c/0x580 fs/read_write.c:549
 ksys_write+0x14f/0x2d0 fs/read_write.c:599
 __do_sys_write fs/read_write.c:611 [inline]
 __se_sys_write fs/read_write.c:608 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:608
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29
RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4
R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Cc Stephen Suryaputra <[email protected]>
---
 net/ipv4/route.c |   34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)
net/ipv4/route.c +24 -10
@@ -1148,25 +1148,39 @@ static struct dst_entry *ipv4_dst_check(
 	return dst;
 }
 
-static void ipv4_link_failure(struct sk_buff *skb)
+static void ipv4_send_dest_unreach(struct sk_buff *skb)
 {
 	struct ip_options opt;
-	struct rtable *rt;
 	int res;
 
 	/* Recompile ip options since IPCB may not be valid anymore.
+	 * Also check we have a reasonable ipv4 header.
 	 */
-	memset(&opt, 0, sizeof(opt));
-	opt.optlen = ip_hdr(skb)->ihl*4 - sizeof(struct iphdr);
-
-	rcu_read_lock();
-	res = __ip_options_compile(dev_net(skb->dev), &opt, skb, NULL);
-	rcu_read_unlock();
-
-	if (res)
+	if (!pskb_network_may_pull(skb, sizeof(struct iphdr)) ||
+	    ip_hdr(skb)->version != 4 || ip_hdr(skb)->ihl < 5)
 		return;
 
+	memset(&opt, 0, sizeof(opt));
+	if (ip_hdr(skb)->ihl > 5) {
+		if (!pskb_network_may_pull(skb, ip_hdr(skb)->ihl * 4))
+			return;
+		opt.optlen = ip_hdr(skb)->ihl * 4 - sizeof(struct iphdr);
+
+		rcu_read_lock();
+		res = __ip_options_compile(dev_net(skb->dev), &opt, skb, NULL);
+		rcu_read_unlock();
+
+		if (res)
+			return;
+	}
 	__icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0, &opt);
+}
+
+static void ipv4_link_failure(struct sk_buff *skb)
+{
+	struct rtable *rt;
+
+	ipv4_send_dest_unreach(skb);
 
 	rt = skb_rtable(skb);
 	if (rt)
author maintainer
#12 lore raw

PATCH 12/86 team: fix possible recursive locking when add slaves

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit 925b0c841e066b488cc3a60272472b2c56300704 ]

If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like:

- team_add_slave()
- team_port_add()
- team_port_enter()
- team_modeop_port_enter()
- __set_port_dev_addr()
- dev_set_mac_address()
- bond_set_mac_address()
- dev_set_mac_address()
- team_set_mac_address

Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave.

v2: Do not split the string in netdev_err()

Fixes 3d249d4ca7d0 ("net: introduce ethernet teaming device")
---
 drivers/net/team/team.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/team/team.c +6 -0
@@ -1137,6 +1137,12 @@ static int team_port_add(struct team *te
 		return -EINVAL;
 	}
 
+	if (netdev_has_upper_dev(dev, port_dev)) {
+		netdev_err(dev, "Device %s is already an upper device of the team interface\n",
+			   portname);
+		return -EBUSY;
+	}
+
 	if (port_dev->features & NETIF_F_VLAN_CHALLENGED &&
 	    vlan_uses_dev(dev)) {
 		netdev_err(dev, "Device %s is VLAN challenged and team device has VLAN set up\n",
author maintainer
#13 lore raw

PATCH 13/86 net: stmmac: move stmmac_check_ether_addr() to driver probe

In reply to Greg Kroah-Hartman

From: Vinod Koul <[email protected]>

[ Upstream commit b561af36b1841088552464cdc3f6371d92f17710 ]

stmmac_check_ether_addr() checks the MAC address and assigns one in driver open(). In many cases when we create slave netdevice, the dev addr is inherited from master but the master dev addr maybe NULL at that time, so move this call to driver probe so that address is always valid.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +2 -2
@@ -1736,8 +1736,6 @@ static int stmmac_open(struct net_device
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret;
 
-	stmmac_check_ether_addr(priv);
-
 	if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI &&
 	    priv->pcs != STMMAC_PCS_RTBI) {
 		ret = stmmac_init_phy(dev);
@@ -2824,6 +2822,8 @@ struct stmmac_priv *stmmac_dvr_probe(str
 	if (ret)
 		goto error_hw_init;
 
+	stmmac_check_ether_addr(priv);
+
 	ndev->netdev_ops = &stmmac_netdev_ops;
 
 	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
author maintainer
#14 lore raw

PATCH 14/86 qlcnic: Avoid potential NULL pointer dereference

In reply to Greg Kroah-Hartman

[ Upstream commit 5bf7295fe34a5251b1d241b9736af4697b590670 ]

netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario.

---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +2 -0
index 0a2318cad34d..63ebc491057b 100644
@@ -1038,6 +1038,8 @@ int qlcnic_do_lb_test(struct qlcnic_adapter *adapter, u8 mode)
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
+		if (!skb)
+			break;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;
Signature · 1 line
2.19.1
author maintainer
#15 lore raw

PATCH 15/86 usb: gadget: net2280: Fix overrun of OUT messages

In reply to Greg Kroah-Hartman

[ Upstream commit 9d6a54c1430647355a5e23434881b2ca3d192b48 ]

The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size.

The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets.

With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet.

---
 drivers/usb/gadget/udc/net2280.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/usb/gadget/udc/net2280.c +1 -3
index 8d13337e2dde..931765208286 100644
@@ -800,9 +800,6 @@ static void start_queue(struct net2280_ep *ep, u32 dmactl, u32 td_dma)
 	(void) readl(&ep->dev->pci->pcimstctl);
 
 	writel(BIT(DMA_START), &dma->dmastat);
-
-	if (!ep->is_in)
-		stop_out_naking(ep);
 }
 
 static void start_dma(struct net2280_ep *ep, struct net2280_request *req)
@@ -841,6 +838,7 @@ static void start_dma(struct net2280_ep *ep, struct net2280_request *req)
 			writel(BIT(DMA_START), &dma->dmastat);
 			return;
 		}
+		stop_out_naking(ep);
 	}
 
 	tmp = dmactl_default;
Signature · 1 line
2.19.1
author maintainer
#16 lore raw

PATCH 16/86 usb: gadget: net2272: Fix net2272_dequeue()

In reply to Greg Kroah-Hartman

[ Upstream commit 091dacc3cc10979ab0422f0a9f7fcc27eee97e69 ]

Restore the status of ep->stopped in function net2272_dequeue().

When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore.

This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()"

---
 drivers/usb/gadget/udc/net2272.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/gadget/udc/net2272.c +1 -0
index 4b2444e75840..83d0544338ca 100644
@@ -962,6 +962,7 @@ net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 			break;
 	}
 	if (&req->req != _req) {
+		ep->stopped = stopped;
 		spin_unlock_irqrestore(&ep->dev->lock, flags);
 		return -EINVAL;
 	}
Signature · 1 line
2.19.1
author maintainer
#17 lore raw

PATCH 17/86 net: ks8851: Dequeue RX packets explicitly

In reply to Greg Kroah-Hartman

[ Upstream commit 536d3680fd2dab5c39857d62a3e084198fc74ff9 ]

The ks8851 driver lets the chip auto-dequeue received packets once they have been read in full. It achieves that by setting the ADRFE flag in the RXQCR register ("Auto-Dequeue RXQ Frame Enable").

However if allocation of a packet's socket buffer or retrieval of the packet over the SPI bus fails, the packet will not have been read in full and is not auto-dequeued. Such partial retrieval of a packet confuses the chip's RX queue management: On the next RX interrupt, the first packet read from the queue will be the one left there previously and this one can be retrieved without issues. But for any newly received packets, the frame header status and byte count registers (RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval.

The chip allows explicitly dequeueing a packet from the RX queue by setting the RRXEF flag in the RXQCR register ("Release RX Error Frame"). This could be used to dequeue the packet in case of an error, but if that error is a failed SPI transfer, it is unknown if the packet was transferred in full and was auto-dequeued or if it was only transferred in part and requires an explicit dequeue. The safest approach is thus to always dequeue packets explicitly and forgo auto-dequeueing.

Without this change, I've witnessed packet retrieval break completely when an SPI DMA transfer fails, requiring a chip reset. Explicit dequeueing magically fixes this and makes packet retrieval absolutely robust for me.

The chip's documentation suggests auto-dequeuing and uses the RRXEF flag only to dequeue error frames which the driver doesn't want to retrieve. But that seems to be a fair-weather approach.

---
 drivers/net/ethernet/micrel/ks8851.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/micrel/ks8851.c +4 -4
index 66d4ab703f45..4a29e191819f 100644
@@ -547,9 +547,8 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
 		/* set dma read address */
 		ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
 
-		/* start the packet dma process, and set auto-dequeue rx */
-		ks8851_wrreg16(ks, KS_RXQCR,
-			       ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE);
+		/* start DMA access */
+		ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
 
 		if (rxlen > 4) {
 			unsigned int rxalign;
@@ -580,7 +579,8 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
 			}
 		}
 
-		ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+		/* end DMA access and dequeue packet */
+		ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_RRXEF);
 	}
 }
 
Signature · 1 line
2.19.1
author maintainer
#18 lore raw

PATCH 18/86 net: ks8851: Reassert reset pin if chip ID check fails

In reply to Greg Kroah-Hartman

[ Upstream commit 761cfa979a0c177d6c2d93ef5585cd79ae49a7d5 ]

Commit 73fdeb82e963 ("net: ks8851: Add optional vdd_io regulator and reset gpio") amended the ks8851 driver to briefly assert the chip's reset pin on probe. It also amended the probe routine's error path to reassert the reset pin if a subsequent initialization step fails.

However the commit misplaced reassertion of the reset pin in the error path such that it is not performed if the check of the Chip ID and Enable Register (CIDER) fails. The error path is therefore slightly asymmetrical to the probe routine's body. Fix it.

---
 drivers/net/ethernet/micrel/ks8851.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/micrel/ks8851.c +1 -1
index 4a29e191819f..e218e45dcf35 100644
@@ -1567,9 +1567,9 @@ static int ks8851_probe(struct spi_device *spi)
 	free_irq(ndev->irq, ks);
 
 err_irq:
+err_id:
 	if (gpio_is_valid(gpio))
 		gpio_set_value(gpio, 0);
-err_id:
 	regulator_disable(ks->vdd_reg);
 err_reg:
 	regulator_disable(ks->vdd_io);
Signature · 1 line
2.19.1
author maintainer
#19 lore raw

PATCH 19/86 net: ks8851: Delay requesting IRQ until opened

In reply to Greg Kroah-Hartman

[ Upstream commit d268f31552794abf5b6aa5af31021643411f25f5 ]

The ks8851 driver currently requests the IRQ before registering the net_device. Because the net_device name is used as IRQ name and is still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs apart if multiple ks8851 chips are present. Most other drivers delay requesting the IRQ until the net_device is opened. Do the same.

The driver doesn't enable interrupts on the chip before opening the net_device and disables them when closing it, so there doesn't seem to be a need to request the IRQ already on probe.

---
 drivers/net/ethernet/micrel/ks8851.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)
drivers/net/ethernet/micrel/ks8851.c +11 -13
index e218e45dcf35..f90a1396535a 100644
@@ -797,6 +797,15 @@ static void ks8851_tx_work(struct work_struct *work)
 static int ks8851_net_open(struct net_device *dev)
 {
 	struct ks8851_net *ks = netdev_priv(dev);
+	int ret;
+
+	ret = request_threaded_irq(dev->irq, NULL, ks8851_irq,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   dev->name, ks);
+	if (ret < 0) {
+		netdev_err(dev, "failed to get irq\n");
+		return ret;
+	}
 
 	/* lock the card, even if we may not actually be doing anything
 	 * else at the moment */
@@ -911,6 +920,8 @@ static int ks8851_net_stop(struct net_device *dev)
 		dev_kfree_skb(txb);
 	}
 
+	free_irq(dev->irq, ks);
+
 	return 0;
 }
 
@@ -1542,14 +1553,6 @@ static int ks8851_probe(struct spi_device *spi)
 	ks8851_read_selftest(ks);
 	ks8851_init_mac(ks);
 
-	ret = request_threaded_irq(spi->irq, NULL, ks8851_irq,
-				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				   ndev->name, ks);
-	if (ret < 0) {
-		dev_err(&spi->dev, "failed to get irq\n");
-		goto err_irq;
-	}
-
 	ret = register_netdev(ndev);
 	if (ret) {
 		dev_err(&spi->dev, "failed to register network device\n");
@@ -1562,11 +1565,7 @@ static int ks8851_probe(struct spi_device *spi)
 
 	return 0;
 
-
 err_netdev:
-	free_irq(ndev->irq, ks);
-
-err_irq:
 err_id:
 	if (gpio_is_valid(gpio))
 		gpio_set_value(gpio, 0);
@@ -1587,7 +1586,6 @@ static int ks8851_remove(struct spi_device *spi)
 		dev_info(&spi->dev, "remove\n");
 
 	unregister_netdev(priv->netdev);
-	free_irq(spi->irq, priv);
 	if (gpio_is_valid(priv->gpio))
 		gpio_set_value(priv->gpio, 0);
 	regulator_disable(priv->vdd_reg);
Signature · 1 line
2.19.1
author maintainer
#20 lore raw

PATCH 20/86 net: ks8851: Set initial carrier state to down

In reply to Greg Kroah-Hartman

[ Upstream commit 9624bafa5f6418b9ca5b3f66d1f6a6a2e8bf6d4c ]

The ks8851 chip's initial carrier state is down. A Link Change Interrupt is signaled once interrupts are enabled if the carrier is up.

The ks8851 driver has it backwards by assuming that the initial carrier state is up. The state is therefore misrepresented if the interface is opened with no cable attached. Fix it.

The Link Change interrupt is sometimes not signaled unless the P1MBSR register (which contains the Link Status bit) is read on ->ndo_open(). This might be a hardware erratum. Read the register by calling mii_check_link(), which has the desirable side effect of setting the carrier state to down if the cable was detached while the interface was closed.

---
 drivers/net/ethernet/micrel/ks8851.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/micrel/ks8851.c +2 -0
index f90a1396535a..8a94add287de 100644
@@ -870,6 +870,7 @@ static int ks8851_net_open(struct net_device *dev)
 	netif_dbg(ks, ifup, ks->netdev, "network device up\n");
 
 	mutex_unlock(&ks->lock);
+	mii_check_link(&ks->mii);
 	return 0;
 }
 
@@ -1527,6 +1528,7 @@ static int ks8851_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, ks);
 
+	netif_carrier_off(ks->netdev);
 	ndev->if_port = IF_PORT_100BASET;
 	ndev->netdev_ops = &ks8851_netdev_ops;
 	ndev->irq = spi->irq;
Signature · 1 line
2.19.1
author maintainer
#21 lore raw

PATCH 21/86 net: ibm: fix possible object reference leak

In reply to Greg Kroah-Hartman

[ Upstream commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 ]

The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function.

---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/ibm/ehea/ehea_main.c +1 -0
index 566b17db135a..a718066bb99f 100644
@@ -3183,6 +3183,7 @@ static ssize_t ehea_probe_port(struct device *dev,
 
 	if (ehea_add_adapter_mr(adapter)) {
 		pr_err("creating MR failed\n");
+		of_node_put(eth_dn);
 		return -EIO;
 	}
 
Signature · 1 line
2.19.1
author maintainer
#22 lore raw

PATCH 22/86 scsi: qla4xxx: fix a potential NULL pointer dereference

In reply to Greg Kroah-Hartman

[ Upstream commit fba1bdd2a9a93f3e2181ec1936a3c2f6b37e7ed6 ]

In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference.

---
 drivers/scsi/qla4xxx/ql4_os.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/qla4xxx/ql4_os.c +2 -0
index a9fac1eb8306..28f6d5ef04e0 100644
@@ -3213,6 +3213,8 @@ static int qla4xxx_conn_bind(struct iscsi_cls_session *cls_session,
 	if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
 		return -EINVAL;
 	ep = iscsi_lookup_endpoint(transport_fd);
+	if (!ep)
+		return -EINVAL;
 	conn = cls_conn->dd_data;
 	qla_conn = conn->dd_data;
 	qla_conn->qla_ep = ep->dd_data;
Signature · 1 line
2.19.1
author maintainer
#23 lore raw

PATCH 23/86 usb: u132-hcd: fix resource leak

In reply to Greg Kroah-Hartman

[ Upstream commit f276e002793cdb820862e8ea8f76769d56bba575 ]

if platform_driver_register fails, cleanup the allocated resource gracefully.

---
 drivers/usb/host/u132-hcd.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/usb/host/u132-hcd.c +3 -0
index ab5128755672..3d9ce725d1df 100644
@@ -3234,6 +3234,9 @@ static int __init u132_hcd_init(void)
 	printk(KERN_INFO "driver %s\n", hcd_name);
 	workqueue = create_singlethread_workqueue("u132");
 	retval = platform_driver_register(&u132_platform_driver);
+	if (retval)
+		destroy_workqueue(workqueue);
+
 	return retval;
 }
 
Signature · 1 line
2.19.1
author maintainer
#24 lore raw

PATCH 24/86 ceph: fix use-after-free on symlink traversal

In reply to Greg Kroah-Hartman

[ Upstream commit daf5cc27eed99afdea8d96e71b89ba41f5406ef6 ]

free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory.

---
 fs/ceph/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ceph/inode.c +1 -1
index 7a1df90c7771..7641fcf83ac8 100644
@@ -472,6 +472,7 @@ static void ceph_i_callback(struct rcu_head *head)
 	struct inode *inode = container_of(head, struct inode, i_rcu);
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
+	kfree(ci->i_symlink);
 	kmem_cache_free(ceph_inode_cachep, ci);
 }
 
@@ -503,7 +504,6 @@ void ceph_destroy_inode(struct inode *inode)
 		ceph_put_snap_realm(mdsc, realm);
 	}
 
-	kfree(ci->i_symlink);
 	while ((n = rb_first(&ci->i_fragtree)) != NULL) {
 		frag = rb_entry(n, struct ceph_inode_frag, node);
 		rb_erase(n, &ci->i_fragtree);
Signature · 1 line
2.19.1
author maintainer
#25 lore raw

PATCH 25/86 scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN

In reply to Greg Kroah-Hartman

[ Upstream commit c8206579175c34a2546de8a74262456278a7795a ]

If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports.

The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports.

The call chain was:

zfcp_fc_incoming_rscn

    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link
          if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"   <===

In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop:

zfcp_fc_incoming_rscn

    if (no_entries > 1)                                     <===
      list_for_each_entry(port, &adapter->port_list, list)  <===
        if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"     <===
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link

Abbreviated example trace records before this code change:

Tag : fcrscn1
WWPN : 0x500507630310d327
ERP want : 0x02
ERP need : 0x02

Tag : fcrscn1
WWPN : 0x500507630310d327
ERP want : 0x02
ERP need : 0x00 NOP => superfluous trace record

The last trace entry repeats if there are more than 2 RSCN elements.

---
 drivers/s390/scsi/zfcp_fc.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)
drivers/s390/scsi/zfcp_fc.c +17 -4
index ca28e1c66115..f9d59262da88 100644
@@ -195,10 +195,6 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 	list_for_each_entry(port, &adapter->port_list, list) {
 		if ((port->d_id & range) == (ntoh24(page->rscn_fid) & range))
 			zfcp_fc_test_link(port);
-		if (!port->d_id)
-			zfcp_erp_port_reopen(port,
-					     ZFCP_STATUS_COMMON_ERP_FAILED,
-					     "fcrscn1");
 	}
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
 }
@@ -206,6 +202,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 static void zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req)
 {
 	struct fsf_status_read_buffer *status_buffer = (void *)fsf_req->data;
+	struct zfcp_adapter *adapter = fsf_req->adapter;
 	struct fc_els_rscn *head;
 	struct fc_els_rscn_page *page;
 	u16 i;
@@ -218,6 +215,22 @@ static void zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req)
 	/* see FC-FS */
 	no_entries = head->rscn_plen / sizeof(struct fc_els_rscn_page);
 
+	if (no_entries > 1) {
+		/* handle failed ports */
+		unsigned long flags;
+		struct zfcp_port *port;
+
+		read_lock_irqsave(&adapter->port_list_lock, flags);
+		list_for_each_entry(port, &adapter->port_list, list) {
+			if (port->d_id)
+				continue;
+			zfcp_erp_port_reopen(port,
+					     ZFCP_STATUS_COMMON_ERP_FAILED,
+					     "fcrscn1");
+		}
+		read_unlock_irqrestore(&adapter->port_list_lock, flags);
+	}
+
 	for (i = 1; i < no_entries; i++) {
 		/* skip head and start with 1st element */
 		page++;
Signature · 1 line
2.19.1
author maintainer
#26 lore raw

PATCH 26/86 libata: fix using DMA buffers on stack

In reply to Greg Kroah-Hartman

[ Upstream commit dd08a8d9a66de4b54575c294a92630299f7e0fe7 ]

When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for a stack virtual address. Stack DMA buffers must be avoided.

---
 drivers/ata/libata-zpodd.c | 34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)
drivers/ata/libata-zpodd.c +24 -10
index 0ad96c647541..7017a81d53cf 100644
@@ -51,38 +51,52 @@ static int eject_tray(struct ata_device *dev)
 /* Per the spec, only slot type and drawer type ODD can be supported */
 static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
 {
-	char buf[16];
+	char *buf;
 	unsigned int ret;
-	struct rm_feature_desc *desc = (void *)(buf + 8);
+	struct rm_feature_desc *desc;
 	struct ata_taskfile tf;
 	static const char cdb[] = {  GPCMD_GET_CONFIGURATION,
 			2,      /* only 1 feature descriptor requested */
 			0, 3,   /* 3, removable medium feature */
 			0, 0, 0,/* reserved */
-			0, sizeof(buf),
+			0, 16,
 			0, 0, 0,
 	};
 
+	buf = kzalloc(16, GFP_KERNEL);
+	if (!buf)
+		return ODD_MECH_TYPE_UNSUPPORTED;
+	desc = (void *)(buf + 8);
+
 	ata_tf_init(dev, &tf);
 	tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	tf.command = ATA_CMD_PACKET;
 	tf.protocol = ATAPI_PROT_PIO;
-	tf.lbam = sizeof(buf);
+	tf.lbam = 16;
 
 	ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
-				buf, sizeof(buf), 0);
-	if (ret)
+				buf, 16, 0);
+	if (ret) {
+		kfree(buf);
 		return ODD_MECH_TYPE_UNSUPPORTED;
+	}
 
-	if (be16_to_cpu(desc->feature_code) != 3)
+	if (be16_to_cpu(desc->feature_code) != 3) {
+		kfree(buf);
 		return ODD_MECH_TYPE_UNSUPPORTED;
+	}
 
-	if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1)
+	if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) {
+		kfree(buf);
 		return ODD_MECH_TYPE_SLOT;
-	else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1)
+	} else if (desc->mech_type == 1 && desc->load == 0 &&
+		   desc->eject == 1) {
+		kfree(buf);
 		return ODD_MECH_TYPE_DRAWER;
-	else
+	} else {
+		kfree(buf);
 		return ODD_MECH_TYPE_UNSUPPORTED;
+	}
 }
 
 /* Test if ODD is zero power ready by sense code */
Signature · 1 line
2.19.1
author maintainer
#27 lore raw

PATCH 27/86 kconfig/[mn]conf: handle backspace (^H) key

In reply to Greg Kroah-Hartman

[ Upstream commit 9c38f1f044080392603c497ecca4d7d09876ff99 ]

Backspace is not working on some terminal emulators which do not send the key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127). But currently only '^?' is handled. Let's also handle '^H' for those terminals.

---
 scripts/kconfig/lxdialog/inputbox.c | 3 ++-
 scripts/kconfig/nconf.c             | 2 +-
 scripts/kconfig/nconf.gui.c         | 3 ++-
 3 files changed, 5 insertions(+), 3 deletions(-)
scripts/kconfig/lxdialog/inputbox.c +2 -1
index d58de1dc5360..510049a7bd1d 100644
@@ -126,7 +126,8 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width
 			case KEY_DOWN:
 				break;
 			case KEY_BACKSPACE:
-			case 127:
+			case 8:   /* ^H */
+			case 127: /* ^? */
 				if (pos) {
 					wattrset(dialog, dlg.inputbox.atr);
 					if (input_x == 0) {
scripts/kconfig/nconf.c +1 -1
index 984489ef2b46..e570f6c9b3ad 100644
@@ -1046,7 +1046,7 @@ static int do_match(int key, struct match_state *state, int *ans)
 		state->match_direction = FIND_NEXT_MATCH_UP;
 		*ans = get_mext_match(state->pattern,
 				state->match_direction);
-	} else if (key == KEY_BACKSPACE || key == 127) {
+	} else if (key == KEY_BACKSPACE || key == 8 || key == 127) {
 		state->pattern[strlen(state->pattern)-1] = '\0';
 		adj_match_dir(&state->match_direction);
 	} else
scripts/kconfig/nconf.gui.c +2 -1
index 4b2f44c20caf..9a65035cf787 100644
@@ -439,7 +439,8 @@ int dialog_inputbox(WINDOW *main_window,
 		case KEY_F(F_EXIT):
 		case KEY_F(F_BACK):
 			break;
-		case 127:
+		case 8:   /* ^H */
+		case 127: /* ^? */
 		case KEY_BACKSPACE:
 			if (cursor_position > 0) {
 				memmove(&result[cursor_position-1],
Signature · 1 line
2.19.1
author maintainer
#28 lore raw

PATCH 28/86 ipv4: ip_do_fragment: Preserve skb_iif during fragmentation

In reply to Greg Kroah-Hartman

From: Shmulik Ladkani <[email protected]>

[ Upstream commit d2f0c961148f65bc73eda72b9fa3a4e80973cb49 ]

Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb.

As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior.

Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex:
- the correct iif is observed if forwarding path does not involve fragmentation/refragmentation
- a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom

Fix, by preserving skb_iif during 'ip_copy_metadata'.

---
 net/ipv4/ip_output.c |    1 +
 1 file changed, 1 insertion(+)
net/ipv4/ip_output.c +1 -0
@@ -454,6 +454,7 @@ static void ip_copy_metadata(struct sk_b
 	to->pkt_type = from->pkt_type;
 	to->priority = from->priority;
 	to->protocol = from->protocol;
+	to->skb_iif = from->skb_iif;
 	skb_dst_drop(to);
 	skb_dst_copy(to, from);
 	to->dev = from->dev;
author maintainer
#29 lore raw

PATCH 29/86 ipv6: invert flowlabel sharing check in process and user mode

In reply to Greg Kroah-Hartman

From: Willem de Bruijn <[email protected]>

[ Upstream commit 95c169251bf734aa555a1e8043e4d88ec97a04ec ]

A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test.

Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner

Fixes 4f82f45730c68 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t")
---
 net/ipv6/ip6_flowlabel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv6/ip6_flowlabel.c +2 -2
@@ -629,9 +629,9 @@ recheck:
 				if (fl1->share == IPV6_FL_S_EXCL ||
 				    fl1->share != fl->share ||
 				    ((fl1->share == IPV6_FL_S_PROCESS) &&
-				     (fl1->owner.pid == fl->owner.pid)) ||
+				     (fl1->owner.pid != fl->owner.pid)) ||
 				    ((fl1->share == IPV6_FL_S_USER) &&
-				     uid_eq(fl1->owner.uid, fl->owner.uid)))
+				     !uid_eq(fl1->owner.uid, fl->owner.uid)))
 					goto release;
 
 				err = -ENOMEM;
author maintainer
#30 lore raw

PATCH 30/86 packet: validate msg_namelen in send directly

In reply to Greg Kroah-Hartman

From: Willem de Bruijn <[email protected]>

[ Upstream commit 486efdc8f6ce802b27e15921d2353cc740c55451 ]

Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header.

Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len.

Change v1->v2: initialize addr in all paths

Fixes 6b8d95f1795c4 ("packet: validate address length if non-zero")
---
 net/packet/af_packet.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)
net/packet/af_packet.c +14 -9
@@ -2252,8 +2252,8 @@ static int tpacket_snd(struct packet_soc
 	void *ph;
 	DECLARE_SOCKADDR(struct sockaddr_ll *, saddr, msg->msg_name);
 	bool need_wait = !(msg->msg_flags & MSG_DONTWAIT);
+	unsigned char *addr = NULL;
 	int tp_len, size_max;
-	unsigned char *addr;
 	int len_sum = 0;
 	int status = TP_STATUS_AVAILABLE;
 	int hlen, tlen;
@@ -2273,10 +2273,13 @@ static int tpacket_snd(struct packet_soc
 						sll_addr)))
 			goto out;
 		proto	= saddr->sll_protocol;
-		addr	= saddr->sll_halen ? saddr->sll_addr : NULL;
 		dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex);
-		if (addr && dev && saddr->sll_halen < dev->addr_len)
-			goto out_put;
+		if (po->sk.sk_socket->type == SOCK_DGRAM) {
+			if (dev && msg->msg_namelen < dev->addr_len +
+				   offsetof(struct sockaddr_ll, sll_addr))
+				goto out_put;
+			addr = saddr->sll_addr;
+		}
 	}
 
 	err = -ENXIO;
@@ -2411,7 +2414,7 @@ static int packet_snd(struct socket *soc
 	struct sk_buff *skb;
 	struct net_device *dev;
 	__be16 proto;
-	unsigned char *addr;
+	unsigned char *addr = NULL;
 	int err, reserve = 0;
 	struct virtio_net_hdr vnet_hdr = { 0 };
 	int offset = 0;
@@ -2428,7 +2431,6 @@ static int packet_snd(struct socket *soc
 	if (likely(saddr == NULL)) {
 		dev	= packet_cached_dev_get(po);
 		proto	= po->num;
-		addr	= NULL;
 	} else {
 		err = -EINVAL;
 		if (msg->msg_namelen < sizeof(struct sockaddr_ll))
@@ -2436,10 +2438,13 @@ static int packet_snd(struct socket *soc
 		if (msg->msg_namelen < (saddr->sll_halen + offsetof(struct sockaddr_ll, sll_addr)))
 			goto out;
 		proto	= saddr->sll_protocol;
-		addr	= saddr->sll_halen ? saddr->sll_addr : NULL;
 		dev = dev_get_by_index(sock_net(sk), saddr->sll_ifindex);
-		if (addr && dev && saddr->sll_halen < dev->addr_len)
-			goto out_unlock;
+		if (sock->type == SOCK_DGRAM) {
+			if (dev && msg->msg_namelen < dev->addr_len +
+				   offsetof(struct sockaddr_ll, sll_addr))
+				goto out_unlock;
+			addr = saddr->sll_addr;
+		}
 	}
 
 	err = -ENXIO;
author maintainer
#31 lore raw

PATCH 31/86 ipv6/flowlabel: wait rcu grace period before put_pid()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 6c0afef5fb0c27758f4d52b2210c61b6bd8b4470 ]

syzbot was able to catch a use-after-free read in pid_nr_ns() [1]

ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started.

[1]

BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407
Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087

CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
 pid_nr_ns+0x128/0x140 kernel/pid.c:407
 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794
 seq_read+0xad3/0x1130 fs/seq_file.c:268
 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_loop_readv_writev fs/read_write.c:688 [inline]
 do_iter_read+0x4a9/0x660 fs/read_write.c:922
 vfs_readv+0xf0/0x160 fs/read_write.c:984
 kernel_readv fs/splice.c:358 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:413
 do_splice_to+0x12a/0x190 fs/splice.c:876
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062
 do_sendfile+0x597/0xd00 fs/read_write.c:1443
 __do_sys_sendfile64 fs/read_write.c:1498 [inline]
 __se_sys_sendfile64 fs/read_write.c:1490 [inline]
 __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458da9
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9
RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4
R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff

Allocated by task 17543:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc mm/kasan/common.c:497 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
 slab_post_alloc_hook mm/slab.h:437 [inline]
 slab_alloc mm/slab.c:3393 [inline]
 kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
 alloc_pid+0x55/0x8f0 kernel/pid.c:168
 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932
 copy_process kernel/fork.c:1709 [inline]
 _do_fork+0x257/0xfd0 kernel/fork.c:2226
 __do_sys_clone kernel/fork.c:2333 [inline]
 __se_sys_clone kernel/fork.c:2327 [inline]
 __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 7789:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
 __cache_free mm/slab.c:3499 [inline]
 kmem_cache_free+0x86/0x260 mm/slab.c:3765
 put_pid.part.0+0x111/0x150 kernel/pid.c:111
 put_pid+0x20/0x30 kernel/pid.c:105
 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102
 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:293

The buggy address belongs to the object at ffff888094012a00
 which belongs to the cache pid_2 of size 88
The buggy address is located 4 bytes inside of
 88-byte region [ffff888094012a00, ffff888094012a58)
The buggy address belongs to the page:
page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080
raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
>ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
                   ^
 ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
 ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
Fixes 4f82f45730c6 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t")
Cc Eric W. Biederman <[email protected]>
---
 net/ipv6/ip6_flowlabel.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
net/ipv6/ip6_flowlabel.c +12 -7
@@ -94,16 +94,21 @@ static struct ip6_flowlabel *fl_lookup(s
 	return fl;
 }
 
+static void fl_free_rcu(struct rcu_head *head)
+{
+	struct ip6_flowlabel *fl = container_of(head, struct ip6_flowlabel, rcu);
+
+	if (fl->share == IPV6_FL_S_PROCESS)
+		put_pid(fl->owner.pid);
+	release_net(fl->fl_net);
+	kfree(fl->opt);
+	kfree(fl);
+}
 
 static void fl_free(struct ip6_flowlabel *fl)
 {
-	if (fl) {
-		if (fl->share == IPV6_FL_S_PROCESS)
-			put_pid(fl->owner.pid);
-		release_net(fl->fl_net);
-		kfree(fl->opt);
-		kfree_rcu(fl, rcu);
-	}
+	if (fl)
+		call_rcu(&fl->rcu, fl_free_rcu);
 }
 
 static void fl_release(struct ip6_flowlabel *fl)
author maintainer
#32 lore raw

PATCH 32/86 USB: yurex: Fix protection fault after device removal

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit ef61eb43ada6c1d6b94668f0f514e4c268093ff3 upstream.

The syzkaller USB fuzzer found a general-protection-fault bug in the yurex driver. The fault occurs when a device has been unplugged; the driver's interrupt-URB handler logs an error message referring to the device by name, after the device has been unregistered and its name deallocated.

This problem is caused by the fact that the interrupt URB isn't cancelled until the driver's private data structure is released, which can happen long after the device is gone. The cure is to make sure that the interrupt URB is killed before yurex_disconnect() returns; this is exactly the sort of thing that usb_poison_urb() was meant for.

---
 drivers/usb/misc/yurex.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/misc/yurex.c +1 -0
@@ -332,6 +332,7 @@ static void yurex_disconnect(struct usb_
 	usb_deregister_dev(interface, &yurex_class);
 
 	/* prevent more I/O from starting */
+	usb_poison_urb(dev->urb);
 	mutex_lock(&dev->io_mutex);
 	dev->interface = NULL;
 	mutex_unlock(&dev->io_mutex);
author maintainer
#33 lore raw

PATCH 33/86 USB: w1 ds2490: Fix bug caused by improper use of altsetting array

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream.

The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings.

The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry.

---
 drivers/w1/masters/ds2490.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/w1/masters/ds2490.c +3 -3
@@ -1013,15 +1013,15 @@ static int ds_probe(struct usb_interface
 	/* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */
 	alt = 3;
 	err = usb_set_interface(dev->udev,
-		intf->altsetting[alt].desc.bInterfaceNumber, alt);
+		intf->cur_altsetting->desc.bInterfaceNumber, alt);
 	if (err) {
 		dev_err(&dev->udev->dev, "Failed to set alternative setting %d "
 			"for %d interface: err=%d.\n", alt,
-			intf->altsetting[alt].desc.bInterfaceNumber, err);
+			intf->cur_altsetting->desc.bInterfaceNumber, err);
 		goto err_out_clear;
 	}
 
-	iface_desc = &intf->altsetting[alt];
+	iface_desc = intf->cur_altsetting;
 	if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
 		pr_info("Num endpoints=%d. It is not DS9490R.\n",
 			iface_desc->desc.bNumEndpoints);
author maintainer
#34 lore raw

PATCH 34/86 USB: core: Fix unterminated string returned by usb_string()

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit c01c348ecdc66085e44912c97368809612231520 upstream.

Some drivers (such as the vub300 MMC driver) expect usb_string() to return a properly NUL-terminated string, even when an error occurs. (In fact, vub300's probe routine doesn't bother to check the return code from usb_string().) When the driver goes on to use an unterminated string, it leads to kernel errors such as stack-out-of-bounds, as found by the syzkaller USB fuzzer.

An out-of-range string index argument is not at all unlikely, given that some devices don't provide string descriptors and therefore list 0 as the value for their string indexes. This patch makes usb_string() return a properly terminated empty string along with the -EINVAL error code when an out-of-range index is encountered.

And since a USB string index is a single-byte value, indexes >= 256 are just as invalid as values of 0 or below.

---
 drivers/usb/core/message.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/core/message.c +3 -1
@@ -820,9 +820,11 @@ int usb_string(struct usb_device *dev, i
 
 	if (dev->state == USB_STATE_SUSPENDED)
 		return -EHOSTUNREACH;
-	if (size <= 0 || !buf || !index)
+	if (size <= 0 || !buf)
 		return -EINVAL;
 	buf[0] = 0;
+	if (index <= 0 || index >= 256)
+		return -EINVAL;
 	tbuf = kmalloc(256, GFP_NOIO);
 	if (!tbuf)
 		return -ENOMEM;
author maintainer
#35 lore raw

PATCH 35/86 USB: media: disable tlg2300 driver

In reply to Greg Kroah-Hartman

From: Greg Kroah-Hartman <[email protected]>

The tlg2300 driver was moved to the staging tree back in 3.19, and then removed entirely from the tree in 4.0. Because it breaks with an upcoming fix for the USB power management logic, let's just disable it from 3.18.y in case anyone is actually using it, as they really shouldn't be anymore.

---
 drivers/media/usb/tlg2300/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/media/usb/tlg2300/Kconfig +1 -0
@@ -1,6 +1,7 @@
 config VIDEO_TLG2300
 	tristate "Telegent TLG2300 USB video capture support"
 	depends on VIDEO_DEV && I2C && SND && DVB_CORE
+	depends on BROKEN
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	depends on RC_CORE
author maintainer
#36 lore raw

PATCH 36/86 USB: core: Fix bug caused by duplicate interface PM usage counter

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit c2b71462d294cf517a0bc6e4fd6424d7cee5596f upstream.

The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active:

	URB 0000000031fb463e submitted while active
	WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363

The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface.

Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound.

This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation!

As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative.

It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this.

---
 Documentation/usb/power-management.txt |   14 +++++++++-----
 drivers/usb/core/driver.c              |   13 -------------
 drivers/usb/storage/realtek_cr.c       |   13 +++++--------
 include/linux/usb.h                    |    2 --
 4 files changed, 14 insertions(+), 28 deletions(-)
Documentation/usb/power-management.txt +9 -5
@@ -364,11 +364,15 @@ autosuspend the interface's device.  Whe
 then the interface is considered to be idle, and the kernel may
 autosuspend the device.
 
-Drivers need not be concerned about balancing changes to the usage
-counter; the USB core will undo any remaining "get"s when a driver
-is unbound from its interface.  As a corollary, drivers must not call
-any of the usb_autopm_* functions after their disconnect() routine has
-returned.
+Drivers must be careful to balance their overall changes to the usage
+counter.  Unbalanced "get"s will remain in effect when a driver is
+unbound from its interface, preventing the device from going into
+runtime suspend should the interface be bound to a driver again.  On
+the other hand, drivers are allowed to achieve this balance by calling
+the ``usb_autopm_*`` functions even after their ``disconnect`` routine
+has returned -- say from within a work-queue routine -- provided they
+retain an active reference to the interface (via ``usb_get_intf`` and
+``usb_put_intf``).
 
 Drivers using the async routines are responsible for their own
 synchronization and mutual exclusion.
drivers/usb/core/driver.c +0 -13
@@ -467,11 +467,6 @@ static int usb_unbind_interface(struct d
 		pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 
-	/* Undo any residual pm_autopm_get_interface_* calls */
-	for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r)
-		usb_autopm_put_interface_no_suspend(intf);
-	atomic_set(&intf->pm_usage_cnt, 0);
-
 	if (!error)
 		usb_autosuspend_device(udev);
 
@@ -1604,7 +1599,6 @@ void usb_autopm_put_interface(struct usb
 	int			status;
 
 	usb_mark_last_busy(udev);
-	atomic_dec(&intf->pm_usage_cnt);
 	status = pm_runtime_put_sync(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
@@ -1633,7 +1627,6 @@ void usb_autopm_put_interface_async(stru
 	int			status;
 
 	usb_mark_last_busy(udev);
-	atomic_dec(&intf->pm_usage_cnt);
 	status = pm_runtime_put(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
@@ -1655,7 +1648,6 @@ void usb_autopm_put_interface_no_suspend
 	struct usb_device	*udev = interface_to_usbdev(intf);
 
 	usb_mark_last_busy(udev);
-	atomic_dec(&intf->pm_usage_cnt);
 	pm_runtime_put_noidle(&intf->dev);
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend);
@@ -1686,8 +1678,6 @@ int usb_autopm_get_interface(struct usb_
 	status = pm_runtime_get_sync(&intf->dev);
 	if (status < 0)
 		pm_runtime_put_sync(&intf->dev);
-	else
-		atomic_inc(&intf->pm_usage_cnt);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
@@ -1721,8 +1711,6 @@ int usb_autopm_get_interface_async(struc
 	status = pm_runtime_get(&intf->dev);
 	if (status < 0 && status != -EINPROGRESS)
 		pm_runtime_put_noidle(&intf->dev);
-	else
-		atomic_inc(&intf->pm_usage_cnt);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
@@ -1746,7 +1734,6 @@ void usb_autopm_get_interface_no_resume(
 	struct usb_device	*udev = interface_to_usbdev(intf);
 
 	usb_mark_last_busy(udev);
-	atomic_inc(&intf->pm_usage_cnt);
 	pm_runtime_get_noresume(&intf->dev);
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume);
drivers/usb/storage/realtek_cr.c +5 -8
@@ -769,18 +769,16 @@ static void rts51x_suspend_timer_fn(unsi
 		break;
 	case RTS51X_STAT_IDLE:
 	case RTS51X_STAT_SS:
-		usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n",
-			     atomic_read(&us->pusb_intf->pm_usage_cnt),
+		usb_stor_dbg(us, "RTS51X_STAT_SS, power.usage:%d\n",
 			     atomic_read(&us->pusb_intf->dev.power.usage_count));
 
-		if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) {
+		if (atomic_read(&us->pusb_intf->dev.power.usage_count) > 0) {
 			usb_stor_dbg(us, "Ready to enter SS state\n");
 			rts51x_set_stat(chip, RTS51X_STAT_SS);
 			/* ignore mass storage interface's children */
 			pm_suspend_ignore_children(&us->pusb_intf->dev, true);
 			usb_autopm_put_interface_async(us->pusb_intf);
-			usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n",
-				     atomic_read(&us->pusb_intf->pm_usage_cnt),
+			usb_stor_dbg(us, "RTS51X_STAT_SS 01, power.usage:%d\n",
 				     atomic_read(&us->pusb_intf->dev.power.usage_count));
 		}
 		break;
@@ -813,11 +811,10 @@ static void rts51x_invoke_transport(stru
 	int ret;
 
 	if (working_scsi(srb)) {
-		usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n",
-			     atomic_read(&us->pusb_intf->pm_usage_cnt),
+		usb_stor_dbg(us, "working scsi, power.usage:%d\n",
 			     atomic_read(&us->pusb_intf->dev.power.usage_count));
 
-		if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) {
+		if (atomic_read(&us->pusb_intf->dev.power.usage_count) <= 0) {
 			ret = usb_autopm_get_interface(us->pusb_intf);
 			usb_stor_dbg(us, "working scsi, ret=%d\n", ret);
 		}
include/linux/usb.h +0 -2
@@ -125,7 +125,6 @@ enum usb_interface_condition {
  * @dev: driver model's view of this device
  * @usb_dev: if an interface is bound to the USB major, this will point
  *	to the sysfs representation for that device.
- * @pm_usage_cnt: PM usage counter for this interface
  * @reset_ws: Used for scheduling resets from atomic context.
  * @resetting_device: USB core reset the device, so use alt setting 0 as
  *	current; needs bandwidth alloc after reset.
@@ -181,7 +180,6 @@ struct usb_interface {
 
 	struct device dev;		/* interface specific device info */
 	struct device *usb_dev;
-	atomic_t pm_usage_cnt;		/* usage counter for autosuspend */
 	struct work_struct reset_ws;	/* for resets in atomic context */
 };
 #define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
author maintainer
#37 lore raw

PATCH 37/86 HID: debug: fix race condition with between rdesc_show() and device removal

In reply to Greg Kroah-Hartman

[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]

There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference:

	 BUG: unable to handle kernel paging request at 0000000783316040
	 CPU: 1 PID: 1512 Comm: getevent Tainted: G     U     O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1
	 RIP: 0010:hid_dump_device+0x9b/0x160
	 Call Trace:
	  hid_debug_rdesc_show+0x72/0x1d0
	  seq_read+0xe0/0x410
	  full_proxy_read+0x5f/0x90
	  __vfs_read+0x3a/0x170
	  vfs_read+0xa0/0x150
	  ksys_read+0x58/0xc0
	  __x64_sys_read+0x1a/0x20
	  do_syscall_64+0x55/0x110
	  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc.

---
 drivers/hid/hid-debug.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/hid/hid-debug.c +5 -0
index e930627d0c76..71b069bd2a24 100644
@@ -1057,10 +1057,15 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p)
 	seq_printf(f, "\n\n");
 
 	/* dump parsed data and input mappings */
+	if (down_interruptible(&hdev->driver_input_lock))
+		return 0;
+
 	hid_dump_device(hdev, f);
 	seq_printf(f, "\n");
 	hid_dump_input_mapping(hdev, f);
 
+	up(&hdev->driver_input_lock);
+
 	return 0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 38/86 rtc: sh: Fix invalid alarm warning for non-enabled alarm

In reply to Greg Kroah-Hartman

[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]

When no alarm has been programmed on RSK-RZA1, an error message is printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields.

Fix this by returning -1 instead, as this value is handled fine for all fields.

---
 drivers/rtc/rtc-sh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-sh.c +1 -1
index d0d2b047658b..dcd5dcae7b3c 100644
@@ -455,7 +455,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
 static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
 {
 	unsigned int byte;
-	int value = 0xff;	/* return 0xff for ignored values */
+	int value = -1;			/* return -1 for ignored values */
 
 	byte = readb(rtc->regbase + reg_off);
 	if (byte & AR_ENB) {
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 39/86 igb: Fix WARN_ONCE on runtime suspend

In reply to Greg Kroah-Hartman

[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]

The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead of inline in the .c file.

Fixes fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
---
 .../net/ethernet/intel/igb/e1000_defines.h    |  2 +
 drivers/net/ethernet/intel/igb/igb_main.c     | 57 +++----------------
 2 files changed, 10 insertions(+), 49 deletions(-)
drivers/net/ethernet/intel/igb/e1000_defines.h +2 -0
index 217f8138851b..bd92291e531d 100644
@@ -193,6 +193,8 @@
 /* enable link status from external LINK_0 and LINK_1 pins */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
 #define E1000_CTRL_SDP0_DIR 0x00400000  /* SDP0 Data direction */
 #define E1000_CTRL_SDP1_DIR 0x00800000  /* SDP1 Data direction */
 #define E1000_CTRL_RST      0x04000000  /* Global reset */
drivers/net/ethernet/intel/igb/igb_main.c +8 -49

97 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/86 bonding: show full hw address in sysfs for slave entries

In reply to Greg Kroah-Hartman

[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]

Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example.

 # cat /sys/devices/<skipped>/net/ib0/address
 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1
 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr
 80:00:02:08:fe:80

So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.

---
 drivers/net/bonding/bond_sysfs_slave.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_sysfs_slave.c +3 -1
index b01b0ce4d1be..cf9e9a3d4a48 100644
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);
 
 static ssize_t perm_hwaddr_show(struct slave *slave, char *buf)
 {
-	return sprintf(buf, "%pM\n", slave->perm_hwaddr);
+	return sprintf(buf, "%*phC\n",
+		       slave->dev->addr_len,
+		       slave->perm_hwaddr);
 }
 static SLAVE_ATTR_RO(perm_hwaddr);
 
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/86 jffs2: fix use-after-free on symlink traversal

In reply to Greg Kroah-Hartman

[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]

free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory.

---
 fs/jffs2/readinode.c | 5 -----
 fs/jffs2/super.c     | 5 ++++-
 2 files changed, 4 insertions(+), 6 deletions(-)
fs/jffs2/readinode.c +0 -5
index 386303dca382..4f390be71723 100644
@@ -1429,11 +1429,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)
 
 	jffs2_kill_fragtree(&f->fragtree, deleted?c:NULL);
 
-	if (f->target) {
-		kfree(f->target);
-		f->target = NULL;
-	}
-
 	fds = f->dents;
 	while(fds) {
 		fd = fds;
fs/jffs2/super.c +4 -1
index 0bbc31d10857..d1be5991bb66 100644
@@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)
 static void jffs2_i_callback(struct rcu_head *head)
 {
 	struct inode *inode = container_of(head, struct inode, i_rcu);
-	kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
+	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+
+	kfree(f->target);
+	kmem_cache_free(jffs2_inode_cachep, f);
 }
 
 static void jffs2_destroy_inode(struct inode *inode)
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 42/86 scsi: storvsc: Fix calculation of sub-channel count

In reply to Greg Kroah-Hartman

[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]

When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many.

This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs).

---
 drivers/scsi/storvsc_drv.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/scsi/storvsc_drv.c +11 -2
index 96c6e75bbfe6..bc29b571e3fb 100644
@@ -788,13 +788,22 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)
 static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 {
 	struct storvsc_device *stor_device;
-	int num_cpus = num_online_cpus();
 	int num_sc;
 	struct storvsc_cmd_request *request;
 	struct vstor_packet *vstor_packet;
 	int ret, t;
 
-	num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns);
+	/*
+	 * If the number of CPUs is artificially restricted, such as
+	 * with maxcpus=1 on the kernel boot line, Hyper-V could offer
+	 * sub-channels >= the number of CPUs. These sub-channels
+	 * should not be created. The primary channel is already created
+	 * and assigned to one CPU, so check against # CPUs - 1.
+	 */
+	num_sc = min((int)(num_online_cpus() - 1), max_chns);
+	if (!num_sc)
+		return;
+
 	stor_device = get_out_stor_device(device);
 	if (!stor_device)
 		return;
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/86 hugetlbfs: fix memory leak for resv_map

In reply to Greg Kroah-Hartman

[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ]

When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked.

Programs to reproduce:
mount -t hugetlbfs nodev hugetlbfs
mknod hugetlbfs/dev b 0 0
exec 30<> hugetlbfs/dev
umount hugetlbfs/

resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations.

---
 fs/hugetlbfs/inode.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
fs/hugetlbfs/inode.c +14 -6
index ec1ed7e4b8f3..c3a03f5a1b49 100644
@@ -484,11 +484,17 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
 					umode_t mode, dev_t dev)
 {
 	struct inode *inode;
-	struct resv_map *resv_map;
+	struct resv_map *resv_map = NULL;
 
-	resv_map = resv_map_alloc();
-	if (!resv_map)
-		return NULL;
+	/*
+	 * Reserve maps are only needed for inodes that can have associated
+	 * page allocations.
+	 */
+	if (S_ISREG(mode) || S_ISLNK(mode)) {
+		resv_map = resv_map_alloc();
+		if (!resv_map)
+			return NULL;
+	}
 
 	inode = new_inode(sb);
 	if (inode) {
@@ -530,8 +536,10 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
 			break;
 		}
 		lockdep_annotate_inode_mutex_key(inode);
-	} else
-		kref_put(&resv_map->refs, resv_map_release);
+	} else {
+		if (resv_map)
+			kref_put(&resv_map->refs, resv_map_release);
+	}
 
 	return inode;
 }
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/86 xsysace: Fix error handling in ace_setup

In reply to Greg Kroah-Hartman

[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]

If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following.

[   10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[   10.681826] Faulting instruction address: 0xc0431480
[   10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[   10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[   10.682387] Modules linked in:
[   10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G        W         5.0.0-rc6-next-20190218+ #2
[   10.682733] NIP:  c0431480 LR: c043147c CTR: c0422ad8
[   10.682863] REGS: cf82fbe0 TRAP: 0300   Tainted: G        W          (5.0.0-rc6-next-20190218+)
[   10.683065] MSR:  00029000 <CE,EE,ME>  CR: 22000222  XER: 00000000
[   10.683236] DEAR: 00000040 ESR: 00000000
[   10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[   10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[   10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[   10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[   10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[   10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[   10.684602] Call Trace:
[   10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[   10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[   10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[   10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[   10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[   10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[   10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[   10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[   10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[   10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[   10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[   10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[   10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[   10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[   10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[   10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[   10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[   10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[   10.687349] Instruction dump:
[   10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[   10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[   10.688056] ---[ end trace 13c9ff51d41b9d40 ]---

Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels.

Fixes 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
---
 drivers/block/xsysace.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/block/xsysace.c +2 -0
index c4328d9d9981..f838119d12b2 100644
@@ -1062,6 +1062,8 @@ static int ace_setup(struct ace_device *ace)
 	return 0;
 
 err_read:
+	/* prevent double queue cleanup */
+	ace->gd->queue = NULL;
 	put_disk(ace->gd);
 err_alloc_disk:
 	blk_cleanup_queue(ace->queue);
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 45/86 ARM: orion: dont use using 64-bit DMA masks

In reply to Greg Kroah-Hartman

[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:

arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]

                .coherent_dma_mask      = DMA_BIT_MASK(64),
                                          ^~~~~~~~~~~~~~~~

include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))

The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.

---
 arch/arm/plat-orion/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/plat-orion/common.c +2 -2
index b8b6e22f9987..c774011131e2 100644
@@ -649,7 +649,7 @@ static struct platform_device orion_xor0_shared = {
 	.resource	= orion_xor0_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = &orion_xor0_pdata,
 	},
 };
@@ -710,7 +710,7 @@ static struct platform_device orion_xor1_shared = {
 	.resource	= orion_xor1_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = &orion_xor1_pdata,
 	},
 };
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/86 ARM: iop: dont use using 64-bit DMA masks

In reply to Greg Kroah-Hartman

[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64:

arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]

 static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
                                  ^~~~~~~~~~~~~~~~
 include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                      ^ ~~~

The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning.

---
 arch/arm/mach-iop13xx/setup.c |  8 ++++----
 arch/arm/mach-iop13xx/tpmi.c  | 10 +++++-----
 arch/arm/plat-iop/adma.c      |  6 +++---
 3 files changed, 12 insertions(+), 12 deletions(-)
arch/arm/mach-iop13xx/setup.c +4 -4
index 53c316f7301e..fe4932fda01d 100644
@@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = {
 	}
 };
 
-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
+static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32);
 static struct iop_adma_platform_data iop13xx_adma_0_data = {
 	.hw_id = 0,
 	.pool_size = PAGE_SIZE,
@@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = {
 	.resource = iop13xx_adma_0_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_0_data,
 	},
 };
@@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = {
 	.resource = iop13xx_adma_1_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_1_data,
 	},
 };
@@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = {
 	.resource = iop13xx_adma_2_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_2_data,
 	},
 };
arch/arm/mach-iop13xx/tpmi.c +5 -5
index db511ec2b1df..116feb6b261e 100644
@@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = {
 	}
 };
 
-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64);
+u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32);
 static struct platform_device iop13xx_tpmi_0_device = {
 	.name = "iop-tpmi",
 	.id = 0,
@@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = {
 	.resource = iop13xx_tpmi_0_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = {
 	.resource = iop13xx_tpmi_1_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = {
 	.resource = iop13xx_tpmi_2_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = {
 	.resource = iop13xx_tpmi_3_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
arch/arm/plat-iop/adma.c +3 -3
index a4d1f8de3b5b..d9612221e484 100644
@@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = {
 	.resource = iop3xx_dma_0_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_dma_0_data,
 	},
 };
@@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = {
 	.resource = iop3xx_dma_1_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_dma_1_data,
 	},
 };
@@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = {
 	.resource = iop3xx_aau_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_aau_data,
 	},
 };
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/86 usb: usbip: fix isoc packet num validation in get_pipe

In reply to Greg Kroah-Hartman

commit c409ca3be3c6ff3a1eeb303b191184e80d412862 upstream.

Backport of the upstream commit, which fixed c6688ef9f297. c6688ef9f297 got backported as commit eebf31529012, as the unavailable function usb_endpoint_maxp_mult had to be replaced. The upstream commit removed the call to this function, so the backport is straightforward.

Original commit message:

Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c

Background/reason:
The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver.

Fixes eebf31529012 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input")
Cc stable <[email protected]> # 3.18.x
---
 drivers/usb/usbip/stub_rx.c      | 18 +++---------------
 drivers/usb/usbip/usbip_common.h |  7 +++++++
 2 files changed, 10 insertions(+), 15 deletions(-)
drivers/usb/usbip/stub_rx.c +3 -15
index 56cacb68040c..808e3a317954 100644
@@ -380,22 +380,10 @@ static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu)
 	}
 
 	if (usb_endpoint_xfer_isoc(epd)) {
-		/* validate packet size and number of packets */
-		unsigned int maxp, packets, bytes;
-
-#define USB_EP_MAXP_MULT_SHIFT  11
-#define USB_EP_MAXP_MULT_MASK   (3 << USB_EP_MAXP_MULT_SHIFT)
-#define USB_EP_MAXP_MULT(m) \
-	(((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT)
-
-		maxp = usb_endpoint_maxp(epd);
-		maxp *= (USB_EP_MAXP_MULT(
-				__le16_to_cpu(epd->wMaxPacketSize)) + 1);
-		bytes = pdu->u.cmd_submit.transfer_buffer_length;
-		packets = DIV_ROUND_UP(bytes, maxp);
-
+		/* validate number of packets */
 		if (pdu->u.cmd_submit.number_of_packets < 0 ||
-		    pdu->u.cmd_submit.number_of_packets > packets) {
+		    pdu->u.cmd_submit.number_of_packets >
+		    USBIP_MAX_ISO_PACKETS) {
 			dev_err(&sdev->udev->dev,
 				"CMD_SUBMIT: isoc invalid num packets %d\n",
 				pdu->u.cmd_submit.number_of_packets);
drivers/usb/usbip/usbip_common.h +7 -0
index 0fc5ace57c0e..af903aa4ad90 100644
@@ -134,6 +134,13 @@ extern struct device_attribute dev_attr_usbip_debug;
 #define USBIP_DIR_OUT	0x00
 #define USBIP_DIR_IN	0x01
 
+/*
+ * Arbitrary limit for the maximum number of isochronous packets in an URB,
+ * compare for example the uhci_submit_isochronous function in
+ * drivers/usb/host/uhci-q.c
+ */
+#define USBIP_MAX_ISO_PACKETS 1024
+
 /**
  * struct usbip_header_basic - data pertinent to every request
  * @command: the usbip request type
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/86 staging: iio: adt7316: allow adt751x to use internal vref for all dacs

In reply to Greg Kroah-Hartman

From: Jeremy Fertic <[email protected]>

commit 10bfe7cc1739c22f0aa296b39e53f61e9e3f4d99 upstream.

With adt7516/7/9, internal vref is available for dacs a and b, dacs c and d, or all dacs. The driver doesn't currently support internal vref for all dacs. Change the else if to an if so both bits are checked rather than just one or the other.

Fixes 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
---
 drivers/staging/iio/addac/adt7316.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/iio/addac/adt7316.c +1 -1
@@ -1092,7 +1092,7 @@ static ssize_t adt7316_store_DAC_interna
 		ldac_config = chip->ldac_config & (~ADT7516_DAC_IN_VREF_MASK);
 		if (data & 0x1)
 			ldac_config |= ADT7516_DAC_AB_IN_VREF;
-		else if (data & 0x2)
+		if (data & 0x2)
 			ldac_config |= ADT7516_DAC_CD_IN_VREF;
 	} else {
 		ret = kstrtou8(buf, 16, &data);
author maintainer
#49 lore raw

PATCH 49/86 staging: iio: adt7316: fix the dac read calculation

In reply to Greg Kroah-Hartman

From: Jeremy Fertic <[email protected]>

commit 45130fb030aec26ac28b4bb23344901df3ec3b7f upstream.

The calculation of the current dac value is using the wrong bits of the dac lsb register. Create two macros to shift the lsb register value into lsb position, depending on whether the dac is 10 or 12 bit. Initialize data to 0 so, with an 8 bit dac, the msb register value can be bitwise ORed with data.

Fixes 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
---
 drivers/staging/iio/addac/adt7316.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/staging/iio/addac/adt7316.c +8 -2
@@ -47,6 +47,8 @@
 #define ADT7516_MSB_AIN3		0xA
 #define ADT7516_MSB_AIN4		0xB
 #define ADT7316_DA_DATA_BASE		0x10
+#define ADT7316_DA_10_BIT_LSB_SHIFT	6
+#define ADT7316_DA_12_BIT_LSB_SHIFT	4
 #define ADT7316_DA_MSB_DATA_REGS	4
 #define ADT7316_LSB_DAC_A		0x10
 #define ADT7316_MSB_DAC_A		0x11
@@ -1414,7 +1416,7 @@ static IIO_DEVICE_ATTR(ex_analog_temp_of
 static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
 		int channel, char *buf)
 {
-	u16 data;
+	u16 data = 0;
 	u8 msb, lsb, offset;
 	int ret;
 
@@ -1439,7 +1441,11 @@ static ssize_t adt7316_show_DAC(struct a
 	if (ret)
 		return -EIO;
 
-	data = (msb << offset) + (lsb & ((1 << offset) - 1));
+	if (chip->dac_bits == 12)
+		data = lsb >> ADT7316_DA_12_BIT_LSB_SHIFT;
+	else if (chip->dac_bits == 10)
+		data = lsb >> ADT7316_DA_10_BIT_LSB_SHIFT;
+	data |= msb << offset;
 
 	return sprintf(buf, "%d\n", data);
 }
author maintainer
#50 lore raw

PATCH 50/86 staging: iio: adt7316: fix the dac write calculation

In reply to Greg Kroah-Hartman

From: Jeremy Fertic <[email protected]>

commit 78accaea117c1ae878774974fab91ac4a0b0e2b0 upstream.

The lsb calculation is not masking the correct bits from the user input. Subtract 1 from (1 << offset) to correctly set up the mask to be applied to user input.

The lsb register stores its value starting at the bit 7 position. adt7316_store_DAC() currently assumes the value is at the other end of the register. Shift the lsb value before storing it in a new variable lsb_reg, and write this variable to the lsb register.

Fixes 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
---
 drivers/staging/iio/addac/adt7316.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/staging/iio/addac/adt7316.c +7 -3
@@ -1453,7 +1453,7 @@ static ssize_t adt7316_show_DAC(struct a
 static ssize_t adt7316_store_DAC(struct adt7316_chip_info *chip,
 		int channel, const char *buf, size_t len)
 {
-	u8 msb, lsb, offset;
+	u8 msb, lsb, lsb_reg, offset;
 	u16 data;
 	int ret;
 
@@ -1471,9 +1471,13 @@ static ssize_t adt7316_store_DAC(struct
 		return -EINVAL;
 
 	if (chip->dac_bits > 8) {
-		lsb = data & (1 << offset);
+		lsb = data & ((1 << offset) - 1);
+		if (chip->dac_bits == 12)
+			lsb_reg = lsb << ADT7316_DA_12_BIT_LSB_SHIFT;
+		else
+			lsb_reg = lsb << ADT7316_DA_10_BIT_LSB_SHIFT;
 		ret = chip->bus.write(chip->bus.client,
-			ADT7316_DA_DATA_BASE + channel * 2, lsb);
+			ADT7316_DA_DATA_BASE + channel * 2, lsb_reg);
 		if (ret)
 			return -EIO;
 	}
author maintainer
#51 lore raw

PATCH 51/86 media: v4l2: i2c: ov7670: Fix PLL bypass register values

In reply to Greg Kroah-Hartman

From: Jacopo Mondi <[email protected]>

commit 61da76beef1e4f0b6ba7be4f8d0cf0dac7ce1f55 upstream.

The following commits:
commit f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675") commit 04ee6d92047e ("[media] media: ov7670: add possibility to bypass pll for ov7675") introduced the ability to bypass PLL multiplier and use input clock (xvclk) as pixel clock output frequency for ov7675 sensor.

PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675 sensor manuals. Macros used to set DBLV register seem wrong in the driver, as their values do not match what reported in the datasheet.

Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to default 0x0a reserved value (according to datasheets).

While at there, remove a write to DBLV register in "ov7675_set_framerate()" that over-writes the previous one to the same register that takes "info->pll_bypass" flag into account instead of setting PLL multiplier to 4x unconditionally.

And, while at there, since "info->pll_bypass" is only used in set/get_framerate() functions used by ov7675 only, it is not necessary to check for the device id at probe time to make sure that when using ov7670 "info->pll_bypass" is set to false.

Fixes f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675")
---
 drivers/media/i2c/ov7670.c |   16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)
drivers/media/i2c/ov7670.c +6 -10
@@ -155,10 +155,10 @@ MODULE_PARM_DESC(debug, "Debug level (0-
 #define REG_GFIX	0x69	/* Fix gain control */
 
 #define REG_DBLV	0x6b	/* PLL control an debugging */
-#define   DBLV_BYPASS	  0x00	  /* Bypass PLL */
-#define   DBLV_X4	  0x01	  /* clock x4 */
-#define   DBLV_X6	  0x10	  /* clock x6 */
-#define   DBLV_X8	  0x11	  /* clock x8 */
+#define   DBLV_BYPASS	  0x0a	  /* Bypass PLL */
+#define   DBLV_X4	  0x4a	  /* clock x4 */
+#define   DBLV_X6	  0x8a	  /* clock x6 */
+#define   DBLV_X8	  0xca	  /* clock x8 */
 
 #define REG_REG76	0x76	/* OV's name */
 #define   R76_BLKPCOR	  0x80	  /* Black pixel correction enable */
@@ -833,7 +833,7 @@ static int ov7675_set_framerate(struct v
 	if (ret < 0)
 		return ret;
 
-	return ov7670_write(sd, REG_DBLV, DBLV_X4);
+	return 0;
 }
 
 static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
@@ -1540,11 +1540,7 @@ static int ov7670_probe(struct i2c_clien
 		if (config->clock_speed)
 			info->clock_speed = config->clock_speed;
 
-		/*
-		 * It should be allowed for ov7670 too when it is migrated to
-		 * the new frame rate formula.
-		 */
-		if (config->pll_bypass && id->driver_data != MODEL_OV7670)
+		if (config->pll_bypass)
 			info->pll_bypass = true;
 
 		if (config->pclk_hb_disable)
author maintainer
#52 lore raw

PATCH 52/86 scsi: libsas: fix a race condition when smp task timeout

In reply to Greg Kroah-Hartman

From: Jason Yan <[email protected]>

commit b90cd6f2b905905fb42671009dc0e27c310a16ae upstream.

When the lldd is processing the complete sas task in interrupt and set the task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be triggered at the same time. And smp_task_timedout() will complete the task wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed before lldd end the interrupt process. Thus a use-after-free will happen.

Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not set. And remove the check of the return value of the del_timer(). Once the LLDD sets DONE, it must call task->done(), which will call smp_task_done()->complete() and the task will be completed and freed correctly.

---
 drivers/scsi/libsas/sas_expander.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/scsi/libsas/sas_expander.c +4 -5
@@ -47,17 +47,16 @@ static void smp_task_timedout(unsigned l
 	unsigned long flags;
 
 	spin_lock_irqsave(&task->task_state_lock, flags);
-	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+		complete(&task->slow_task->completion);
+	}
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-	complete(&task->slow_task->completion);
 }
 
 static void smp_task_done(struct sas_task *task)
 {
-	if (!del_timer(&task->slow_task->timer))
-		return;
+	del_timer(&task->slow_task->timer);
 	complete(&task->slow_task->completion);
 }
 
author maintainer
#53 lore raw

PATCH 53/86 ASoC:soc-pcm:fix a codec fixup issue in TDM case

In reply to Greg Kroah-Hartman

[ Upstream commit 570f18b6a8d1f0e60e8caf30e66161b6438dcc91 ]

On HDaudio platforms, if playback is started when capture is working, there is no audible output.

This can be root-caused to the use of the rx|tx_mask to store an HDaudio stream tag.

If capture is stared before playback, rx_mask would be non-zero on HDaudio platform, then the channel number of playback, which is in the same codec dai with the capture, would be changed by soc_pcm_codec_params_fixup based on the tx_mask at first, then overwritten by this function based on rx_mask at last.

According to the author of tx|rx_mask, tx_mask is for playback and rx_mask is for capture. And stream direction is checked at all other references of tx|rx_mask in ASoC, so here should be an error. This patch checks stream direction for tx|rx_mask for fixup function.

This issue would affect not only HDaudio+ASoC, but also I2S codecs if the channel number based on rx_mask is not equal to the one for tx_mask. It could be rarely reproduecd because most drivers in kernel set the same channel number to tx|rx_mask or rx_mask is zero.

Tested on all platforms using stream_tag & HDaudio and intel I2S platforms.

---
 sound/soc/soc-pcm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
sound/soc/soc-pcm.c +5 -2
index e2fb859fbbaa1..4323002c67db2 100644
@@ -847,10 +847,13 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
 		codec_params = *params;
 
 		/* fixup params based on TDM slot masks */
-		if (codec_dai->tx_mask)
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
+		    codec_dai->tx_mask)
 			soc_pcm_codec_params_fixup(&codec_params,
 						   codec_dai->tx_mask);
-		if (codec_dai->rx_mask)
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE &&
+		    codec_dai->rx_mask)
 			soc_pcm_codec_params_fixup(&codec_params,
 						   codec_dai->rx_mask);
 
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 54/86 ASoC: cs4270: Set auto-increment bit for register writes

In reply to Greg Kroah-Hartman

[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]

The CS4270 does not by default increment the register address on consecutive writes. During normal operation it doesn't matter as all register accesses are done individually. At resume time after suspend, however, the regcache code gathers the biggest possible block of registers to sync and sends them one on one go.

To fix this, set the INCR bit in all cases.

---
 sound/soc/codecs/cs4270.c | 1 +
 1 file changed, 1 insertion(+)
sound/soc/codecs/cs4270.c +1 -0
index 736c1ea8e31e2..756796c064136 100644
@@ -641,6 +641,7 @@ static const struct regmap_config cs4270_regmap = {
 	.reg_defaults =		cs4270_reg_defaults,
 	.num_reg_defaults =	ARRAY_SIZE(cs4270_reg_defaults),
 	.cache_type =		REGCACHE_RBTREE,
+	.write_flag_mask =	CS4270_I2C_INCR,
 
 	.readable_reg =		cs4270_reg_is_readable,
 	.volatile_reg =		cs4270_reg_is_volatile,
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/86 ASoC: tlv320aic32x4: Fix Common Pins

In reply to Greg Kroah-Hartman

[ Upstream commit c63adb28f6d913310430f14c69f0a2ea55eed0cc ]

The common pins were mistakenly not added to the DAPM graph. Adding these pins will allow valid graphs to be created.

---
 sound/soc/codecs/tlv320aic32x4.c | 2 ++
 1 file changed, 2 insertions(+)
sound/soc/codecs/tlv320aic32x4.c +2 -0
index 6ea662db24107..fdce75d5c6753 100644
@@ -234,6 +234,8 @@ static const struct snd_soc_dapm_widget aic32x4_dapm_widgets[] = {
 	SND_SOC_DAPM_INPUT("IN2_R"),
 	SND_SOC_DAPM_INPUT("IN3_L"),
 	SND_SOC_DAPM_INPUT("IN3_R"),
+	SND_SOC_DAPM_INPUT("CM_L"),
+	SND_SOC_DAPM_INPUT("CM_R"),
 };
 
 static const struct snd_soc_dapm_route aic32x4_dapm_routes[] = {
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 56/86 scsi: csiostor: fix missing data copy in csio_scsi_err_handler()

In reply to Greg Kroah-Hartman

[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]

If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done().

---
 drivers/scsi/csiostor/csio_scsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/csiostor/csio_scsi.c +4 -1
index 86103c8475d8e..fbb2052bc4129 100644
@@ -1737,8 +1737,11 @@ csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req)
 	}
 
 out:
-	if (req->nsge > 0)
+	if (req->nsge > 0) {
 		scsi_dma_unmap(cmnd);
+		if (req->dcopy && (host_status == DID_OK))
+			host_status = csio_scsi_copy_to_sgl(hw, req);
+	}
 
 	cmnd->result = (((host_status) << 16) | scsi_status);
 	cmnd->scsi_done(cmnd);
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 57/86 iommu/amd: Set exclusion range correctly

In reply to Greg Kroah-Hartman

[ Upstream commit 3c677d206210f53a4be972211066c0f1cd47fe12 ]

The exlcusion range limit register needs to contain the base-address of the last page that is part of the range, as bits 0-11 of this register are treated as 0xfff by the hardware for comparisons.

So correctly set the exclusion range in the hardware to the last page which is _in_ the range.

Fixes b2026aa2dce44 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
---
 drivers/iommu/amd_iommu_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/amd_iommu_init.c +1 -1
index 2f3475247f0ff..127f9cc563e9b 100644
@@ -294,7 +294,7 @@ static void iommu_write_l2(struct amd_iommu *iommu, u8 address, u32 val)
 static void iommu_set_exclusion_range(struct amd_iommu *iommu)
 {
 	u64 start = iommu->exclusion_start & PAGE_MASK;
-	u64 limit = (start + iommu->exclusion_length) & PAGE_MASK;
+	u64 limit = (start + iommu->exclusion_length - 1) & PAGE_MASK;
 	u64 entry;
 
 	if (!iommu->exclusion_start)
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 58/86 genirq: Prevent use-after-free and work list corruption

In reply to Greg Kroah-Hartman

[ Upstream commit 59c39840f5abf4a71e1810a8da71aaccd6c17d26 ]

When irq_set_affinity_notifier() replaces the notifier, then the reference count on the old notifier is dropped which causes it to be freed. But nothing ensures that the old notifier is not longer queued in the work list. If it is queued this results in a use after free and possibly in work list corruption.

Ensure that the work is canceled before the reference is dropped.

---
 kernel/irq/manage.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/irq/manage.c +3 -1
@@ -307,8 +307,10 @@ irq_set_affinity_notifier(unsigned int i
 	desc->affinity_notify = notify;
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
 
-	if (old_notify)
+	if (old_notify) {
+		cancel_work_sync(&old_notify->work);
 		kref_put(&old_notify->kref, old_notify->release);
+	}
 
 	return 0;
 }
author maintainer
#59 lore raw

PATCH 59/86 scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines

In reply to Greg Kroah-Hartman

From: Andrew Vasquez <[email protected]>

commit 5cbdae10bf11f96e30b4d14de7b08c8b490e903c upstream.

Commit e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") incorrectly set 'optrom_region_size' to 'start+size', which can overflow option-rom boundaries when 'start' is non-zero. Continue setting optrom_region_size to the proper adjusted value of 'size'.

Fixes e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code")
---
 drivers/scsi/qla2xxx/qla_attr.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +2 -2
@@ -431,7 +431,7 @@ qla2x00_sysfs_write_optrom_ctl(struct fi
 		}
 
 		ha->optrom_region_start = start;
-		ha->optrom_region_size = start + size;
+		ha->optrom_region_size = size;
 
 		ha->optrom_state = QLA_SREADING;
 		ha->optrom_buffer = vmalloc(ha->optrom_region_size);
@@ -504,7 +504,7 @@ qla2x00_sysfs_write_optrom_ctl(struct fi
 		}
 
 		ha->optrom_region_start = start;
-		ha->optrom_region_size = start + size;
+		ha->optrom_region_size = size;
 
 		ha->optrom_state = QLA_SWRITING;
 		ha->optrom_buffer = vmalloc(ha->optrom_region_size);
author maintainer
#60 lore raw

PATCH 60/86 Bluetooth: hidp: fix buffer overflow

In reply to Greg Kroah-Hartman

From: Young Xiao <[email protected]>

commit a1616a5ac99ede5d605047a9012481ce7ff18b16 upstream.

Struct ca is copied from userspace. It is not checked whether the "name" field is NULL terminated, which allows local users to obtain potentially sensitive information from kernel stack memory, via a HIDPCONNADD command.

This vulnerability is similar to CVE-2011-1079.

---
 net/bluetooth/hidp/sock.c |    1 +
 1 file changed, 1 insertion(+)
net/bluetooth/hidp/sock.c +1 -0
@@ -76,6 +76,7 @@ static int hidp_sock_ioctl(struct socket
 			sockfd_put(csock);
 			return err;
 		}
+		ca.name[sizeof(ca.name)-1] = 0;
 
 		err = hidp_connection_add(&ca, csock, isock);
 		if (!err && copy_to_user(argp, &ca, sizeof(ca)))
author maintainer
#61 lore raw

PATCH 61/86 Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

In reply to Greg Kroah-Hartman

From: Marcel Holtmann <[email protected]>

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well.

---
 include/net/bluetooth/hci_core.h |    3 +++
 net/bluetooth/hci_conn.c         |    8 ++++++++
 2 files changed, 11 insertions(+)
include/net/bluetooth/hci_core.h +3 -0
@@ -145,6 +145,9 @@ struct oob_data {
 
 #define HCI_MAX_SHORT_NAME_LENGTH	10
 
+/* Min encryption key size to match with SMP */
+#define HCI_MIN_ENC_KEY_SIZE		7
+
 /* Default LE RPA expiry time, 15 minutes */
 #define HCI_DEFAULT_RPA_TIMEOUT		(15 * 60)
 
net/bluetooth/hci_conn.c +8 -0
@@ -932,6 +932,14 @@ int hci_conn_check_link_mode(struct hci_
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
+	/* The minimum encryption key size needs to be enforced by the
+	 * host stack before establishing any L2CAP connections. The
+	 * specification in theory allows a minimum of 1, but to align
+	 * BR/EDR and LE transports, a minimum of 7 is chosen.
+	 */
+	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
+		return 0;
+
 	return 1;
 }
 
author maintainer
#62 lore raw

PATCH 62/86 timer/debug: Change /proc/timer_stats from 0644 to 0600

In reply to Greg Kroah-Hartman

From: Ben Hutchings <[email protected]>

The timer_stats facility should filter and translate PIDs if opened from a non-initial PID namespace, to avoid leaking information about the wider system. It should also not show kernel virtual addresses. Unfortunately it has now been removed upstream (as redundant) instead of being fixed.

For stable, fix the leak by restricting access to root only. A similar change was already made for the /proc/timer_list file.

---
 kernel/time/timer_stats.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/time/timer_stats.c +1 -1
@@ -417,7 +417,7 @@ static int __init init_tstats_procfs(voi
 {
 	struct proc_dir_entry *pe;
 
-	pe = proc_create("timer_stats", 0644, NULL, &tstats_fops);
+	pe = proc_create("timer_stats", 0600, NULL, &tstats_fops);
 	if (!pe)
 		return -ENOMEM;
 	return 0;
author maintainer
#63 lore raw

PATCH 63/86 netfilter: compat: initialize all fields in xt_init

In reply to Greg Kroah-Hartman

commit 8d29d16d21342a0c86405d46de0c4ac5daf1760f upstream

If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running

% ebtables -t broute -F BROUTING

from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt.

[  474.680846] BUG: unable to handle kernel paging request at 0000000009600920
[  474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0
[  474.693838] Oops: 0000 [#1] SMP
[  474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1
[  474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013
[  474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables]
[  474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d
[  474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207
[  474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249
[  474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124
[  474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f
[  474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001
[  474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8
[  474.780234] FS:  0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700
[  474.788612] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[  474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0
[  474.802052] Call Trace:
[  474.804789]  compat_do_replace+0x1fb/0x2a3 [ebtables]
[  474.810105]  compat_do_ebt_set_ctl+0x69/0xe6 [ebtables]
[  474.815605]  ? try_module_get+0x37/0x42
[  474.819716]  compat_nf_setsockopt+0x4f/0x6d
[  474.824172]  compat_ip_setsockopt+0x7e/0x8c
[  474.828641]  compat_raw_setsockopt+0x16/0x3a
[  474.833220]  compat_sock_common_setsockopt+0x1d/0x24
[  474.838458]  __compat_sys_setsockopt+0x17e/0x1b1
[  474.843343]  ? __check_object_size+0x76/0x19a
[  474.847960]  __ia32_compat_sys_socketcall+0x1cb/0x25b
[  474.853276]  do_fast_syscall_32+0xaf/0xf6
[  474.857548]  entry_SYSENTER_compat+0x6b/0x7a
---
 net/netfilter/x_tables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/x_tables.c +1 -1
index 97c37cf560199..8669e190ce35a 100644
@@ -1648,7 +1648,7 @@ static int __init xt_init(void)
 		seqcount_init(&per_cpu(xt_recseq, i));
 	}
 
-	xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
+	xt = kcalloc(NFPROTO_NUMPROTO, sizeof(struct xt_af), GFP_KERNEL);
 	if (!xt)
 		return -ENOMEM;
 
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 64/86 platform/x86: sony-laptop: Fix unintentional fall-through

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit 1cbd7a64959d33e7a2a1fa2bf36a62b350a9fcbd upstream.

It seems that the default case should return AE_CTRL_TERMINATE, instead of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK; otherwise the line of code at the end of the function is unreachable and makes no sense:

return AE_CTRL_TERMINATE;

This fix is based on the following thread of discussion:

https://lore.kernel.org/patchwork/patch/959782/

Fixes 33a04454527e ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)")
---
 drivers/platform/x86/sony-laptop.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/platform/x86/sony-laptop.c +5 -3
@@ -4399,14 +4399,16 @@ sony_pic_read_possible_resource(struct a
 			}
 			return AE_OK;
 		}
+
+	case ACPI_RESOURCE_TYPE_END_TAG:
+		return AE_OK;
+
 	default:
 		dprintk("Resource %d isn't an IRQ nor an IO port\n",
 			resource->type);
+		return AE_CTRL_TERMINATE;
 
-	case ACPI_RESOURCE_TYPE_END_TAG:
-		return AE_OK;
 	}
-	return AE_CTRL_TERMINATE;
 }
 
 static int sony_pic_possible_resources(struct acpi_device *device)
author maintainer
#65 lore raw

PATCH 65/86 iio: adc: xilinx: fix potential use-after-free on remove

In reply to Greg Kroah-Hartman

[ Upstream commit 62039b6aef63380ba7a37c113bbaeee8a55c5342 ]

When cancel_delayed_work() returns, the delayed work may still be running. This means that the core could potentially free the private structure (struct xadc) while the delayed work is still using it. This is a potential use-after-free.

Fix by calling cancel_delayed_work_sync(), which waits for any residual work to finish before returning.

---
 drivers/iio/adc/xilinx-xadc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/xilinx-xadc-core.c +1 -1
index a483747cdc9b9..b520de11fc17f 100644
@@ -1315,7 +1315,7 @@ static int xadc_remove(struct platform_device *pdev)
 	}
 	free_irq(irq, indio_dev);
 	clk_disable_unprepare(xadc->clk);
-	cancel_delayed_work(&xadc->zynq_unmask_work);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 	kfree(xadc->data);
 	kfree(indio_dev->channels);
 
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 66/86 HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys

In reply to Greg Kroah-Hartman

[ Upstream commit 7975a1d6a7afeb3eb61c971a153d24dd8fa032f3 ]

According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page correspond to Brightness Up/Down/Toggle keys, so let's add the mappings.

---
 drivers/hid/hid-input.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/hid/hid-input.c +4 -0
index bb870ee75a903..b7d5a88354247 100644
@@ -745,6 +745,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x074: map_key_clear(KEY_BRIGHTNESS_MAX);		break;
 		case 0x075: map_key_clear(KEY_BRIGHTNESS_AUTO);		break;
 
+		case 0x079: map_key_clear(KEY_KBDILLUMUP);	break;
+		case 0x07a: map_key_clear(KEY_KBDILLUMDOWN);	break;
+		case 0x07c: map_key_clear(KEY_KBDILLUMTOGGLE);	break;
+
 		case 0x082: map_key_clear(KEY_VIDEO_NEXT);	break;
 		case 0x083: map_key_clear(KEY_LAST);		break;
 		case 0x084: map_key_clear(KEY_ENTER);		break;
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 67/86 s390/dasd: Fix capacity calculation for large volumes

In reply to Greg Kroah-Hartman

[ Upstream commit 2cc9637ce825f3a9f51f8f78af7474e9e85bfa5f ]

The DASD driver incorrectly limits the maximum number of blocks of ECKD DASD volumes to 32 bit numbers. Volumes with a capacity greater than 2^32-1 blocks are incorrectly recognized as smaller volumes.

This results in the following volume capacity limits depending on the formatted block size:

  BLKSIZE  MAX_GB   MAX_CYL
      512    2047   5843492
     1024    4095   8676701
     2048    8191  13634816
     4096   16383  23860929

The same problem occurs when a volume with more than 17895697 cylinders is accessed in raw-track-access mode.

Fix this problem by adding an explicit type cast when calculating the maximum number of blocks.

---
 drivers/s390/block/dasd_eckd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/s390/block/dasd_eckd.c +3 -3
index 4bbcdf991c262..4856e5bbb42fa 100644
@@ -2031,14 +2031,14 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
 
 raw:
-	block->blocks = (private->real_cyl *
+	block->blocks = ((unsigned long) private->real_cyl *
 			  private->rdc_data.trk_per_cyl *
 			  blk_per_trk);
 
 	dev_info(&device->cdev->dev,
-		 "DASD with %d KB/block, %d KB total size, %d KB/track, "
+		 "DASD with %u KB/block, %lu KB total size, %u KB/track, "
 		 "%s\n", (block->bp_block >> 10),
-		 ((private->real_cyl *
+		 (((unsigned long) private->real_cyl *
 		   private->rdc_data.trk_per_cyl *
 		   blk_per_trk * (block->bp_block >> 9)) >> 1),
 		 ((blk_per_trk * block->bp_block) >> 10),
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 68/86 s390/3270: fix lockdep false positive on view->lock

In reply to Greg Kroah-Hartman

[ Upstream commit 5712f3301a12c0c3de9cc423484496b0464f2faf ]

The spinlock in the raw3270_view structure is used by con3270, tty3270 and fs3270 in different ways. For con3270 the lock can be acquired in irq context, for tty3270 and fs3270 the highest context is bh.

Lockdep sees the view->lock as a single class and if the 3270 driver is used for the console the following message is generated:

WARNING: inconsistent lock state
5.1.0-rc3-05157-g5c168033979d #12 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
swapper/0/1 [HC0[0]:SC1[1]:HE1:SE0] takes:
(____ptrval____) (&(&view->lock)->rlock){?.-.}, at: tty3270_update+0x7c/0x330

Introduce a lockdep subclass for the view lock to distinguish bh from irq locks.

---
 drivers/s390/char/con3270.c | 2 +-
 drivers/s390/char/fs3270.c  | 3 ++-
 drivers/s390/char/raw3270.c | 3 ++-
 drivers/s390/char/raw3270.h | 4 +++-
 drivers/s390/char/tty3270.c | 3 ++-
 5 files changed, 10 insertions(+), 5 deletions(-)
drivers/s390/char/con3270.c +1 -1
index 7c511add5aa7d..84b6c5080a790 100644
@@ -622,7 +622,7 @@ con3270_init(void)
 		     (void (*)(unsigned long)) con3270_read_tasklet,
 		     (unsigned long) condev->read);
 
-	raw3270_add_view(&condev->view, &con3270_fn, 1);
+	raw3270_add_view(&condev->view, &con3270_fn, 1, RAW3270_VIEW_LOCK_IRQ);
 
 	INIT_LIST_HEAD(&condev->freemem);
 	for (i = 0; i < CON3270_STRING_PAGES; i++) {
drivers/s390/char/fs3270.c +2 -1
index 71e9747380149..f0c86bcbe3161 100644
@@ -463,7 +463,8 @@ fs3270_open(struct inode *inode, struct file *filp)
 
 	init_waitqueue_head(&fp->wait);
 	fp->fs_pid = get_pid(task_pid(current));
-	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor);
+	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor,
+			      RAW3270_VIEW_LOCK_BH);
 	if (rc) {
 		fs3270_free_view(&fp->view);
 		goto out;
drivers/s390/char/raw3270.c +2 -1
index 220acb4cbee52..9c350e6d75bf7 100644
@@ -956,7 +956,7 @@ raw3270_deactivate_view(struct raw3270_view *view)
  * Add view to device with minor "minor".
  */
 int
-raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
+raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor, int subclass)
 {
 	unsigned long flags;
 	struct raw3270 *rp;
@@ -978,6 +978,7 @@ raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
 		view->cols = rp->cols;
 		view->ascebc = rp->ascebc;
 		spin_lock_init(&view->lock);
+		lockdep_set_subclass(&view->lock, subclass);
 		list_add(&view->list, &rp->view_list);
 		rc = 0;
 		spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
drivers/s390/char/raw3270.h +3 -1
index e1e41c2861fbb..5ae54317857a0 100644
@@ -155,6 +155,8 @@ struct raw3270_fn {
 struct raw3270_view {
 	struct list_head list;
 	spinlock_t lock;
+#define RAW3270_VIEW_LOCK_IRQ	0
+#define RAW3270_VIEW_LOCK_BH	1
 	atomic_t ref_count;
 	struct raw3270 *dev;
 	struct raw3270_fn *fn;
@@ -163,7 +165,7 @@ struct raw3270_view {
 	unsigned char *ascebc;		/* ascii -> ebcdic table */
 };
 
-int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int);
+int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int, int);
 int raw3270_activate_view(struct raw3270_view *);
 void raw3270_del_view(struct raw3270_view *);
 void raw3270_deactivate_view(struct raw3270_view *);
drivers/s390/char/tty3270.c +2 -1
index e96fc7fd94984..ab95d24b991b4 100644
@@ -937,7 +937,8 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
 		return PTR_ERR(tp);
 
 	rc = raw3270_add_view(&tp->view, &tty3270_fn,
-			      tty->index + RAW3270_FIRSTMINOR);
+			      tty->index + RAW3270_FIRSTMINOR,
+			      RAW3270_VIEW_LOCK_BH);
 	if (rc) {
 		tty3270_free_view(tp);
 		return rc;
Signature · 1 line
2.20.1
author maintainer
#69 lore raw

PATCH 69/86 KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing

In reply to Greg Kroah-Hartman

[ Upstream commit 7a223e06b1a411cef6c4cd7a9b9a33c8d225b10e ]

In __apic_accept_irq() interface trig_mode is int and actually on some code paths it is set above u8:

kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to (1 << 15) & e->msi.data

kvm_apic_local_deliver sets it to reg & (1 << 15).

Fix the immediate issue by making 'tm' into u16. We may also want to adjust __apic_accept_irq() interface and use proper sizes for vector, level, trig_mode but this is not urgent.

---
 arch/x86/kvm/trace.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kvm/trace.h +2 -2
index 6b06ab8748dd5..005a5b8d5628f 100644
@@ -415,13 +415,13 @@ TRACE_EVENT(kvm_apic_ipi,
 );
 
 TRACE_EVENT(kvm_apic_accept_irq,
-	    TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec),
+	    TP_PROTO(__u32 apicid, __u16 dm, __u16 tm, __u8 vec),
 	    TP_ARGS(apicid, dm, tm, vec),
 
 	TP_STRUCT__entry(
 		__field(	__u32,		apicid		)
 		__field(	__u16,		dm		)
-		__field(	__u8,		tm		)
+		__field(	__u16,		tm		)
 		__field(	__u8,		vec		)
 	),
 
Signature · 1 line
2.20.1
author maintainer
#70 lore raw

PATCH 70/86 tools lib traceevent: Fix missing equality check for strcmp

In reply to Greg Kroah-Hartman

[ Upstream commit f32c2877bcb068a718bb70094cd59ccc29d4d082 ]

There was a missing comparison with 0 when checking if type is "s64" or "u64". Therefore, the body of the if-statement was entered if "type" was "u64" or not "s64", which made the first strcmp() redundant since if type is "u64", it's not "s64".

If type is "s64", the body of the if-statement is not entered but since the remainder of the function consists of if-statements which will not be entered if type is "s64", we will just return "val", which is correct, albeit at the cost of a few more calls to strcmp(), i.e., it will behave just as if the if-statement was entered.

If type is neither "s64" or "u64", the body of the if-statement will be entered incorrectly and "val" returned. This means that any type that is checked after "s64" and "u64" is handled the same way as "s64" and "u64", i.e., the limiting of "val" to fit in for example "s8" is never reached.

This was introduced in the kernel tree when the sources were copied from trace-cmd in commit f7d82350e597 ("tools/events: Add files to create libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei ("Implement typecasting in parser") when the function was introduced, i.e., it has always behaved the wrong way.

Detected by cppcheck.

Cc Tzvetomir Stoyanov <[email protected]>
Fixes f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
---
 tools/lib/traceevent/event-parse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/traceevent/event-parse.c +1 -1
index 84374e313e3f8..d404c3ded0e36 100644
@@ -2065,7 +2065,7 @@ eval_type_str(unsigned long long val, const char *type, int pointer)
 		return val & 0xffffffff;
 
 	if (strcmp(type, "u64") == 0 ||
-	    strcmp(type, "s64"))
+	    strcmp(type, "s64") == 0)
 		return val;
 
 	if (strcmp(type, "s8") == 0)
Signature · 1 line
2.20.1
author maintainer
#71 lore raw

PATCH 71/86 init: initialize jump labels before command line option parsing

In reply to Greg Kroah-Hartman

[ Upstream commit 6041186a32585fc7a1d0f6cfe2f138b05fdc3c82 ]

When a module option, or core kernel argument, toggles a static-key it requires jump labels to be initialized early. While x86, PowerPC, and ARM64 arrange for jump_label_init() to be called before parse_args(), ARM does not.

Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303
  page_alloc_shuffle+0x12c/0x1ac
  static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used
  before call to jump_label_init()
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted
  5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1
  Hardware name: ARM Integrator/CP (Device Tree)
  [<c0011c68>] (unwind_backtrace) from [<c000ec48>] (show_stack+0x10/0x18)
  [<c000ec48>] (show_stack) from [<c07e9710>] (dump_stack+0x18/0x24)
  [<c07e9710>] (dump_stack) from [<c001bb1c>] (__warn+0xe0/0x108)
  [<c001bb1c>] (__warn) from [<c001bb88>] (warn_slowpath_fmt+0x44/0x6c)
  [<c001bb88>] (warn_slowpath_fmt) from [<c0b0c4a8>]
  (page_alloc_shuffle+0x12c/0x1ac)
  [<c0b0c4a8>] (page_alloc_shuffle) from [<c0b0c550>] (shuffle_store+0x28/0x48)
  [<c0b0c550>] (shuffle_store) from [<c003e6a0>] (parse_args+0x1f4/0x350)
  [<c003e6a0>] (parse_args) from [<c0ac3c00>] (start_kernel+0x1c0/0x488)

Move the fallback call to jump_label_init() to occur before parse_args().

The redundant calls to jump_label_init() in other archs are left intact in case they have static key toggling use cases that are even earlier than option parsing.

---
 init/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
init/main.c +2 -2
index 32940a68ea484..6235c0bed3da2 100644
@@ -539,6 +539,8 @@ asmlinkage __visible void __init start_kernel(void)
 	page_alloc_init();
 
 	pr_notice("Kernel command line: %s\n", boot_command_line);
+	/* parameters may set static keys */
+	jump_label_init();
 	parse_early_param();
 	after_dashes = parse_args("Booting kernel",
 				  static_command_line, __start___param,
@@ -548,8 +550,6 @@ asmlinkage __visible void __init start_kernel(void)
 		parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
 			   set_init_arg);
 
-	jump_label_init();
-
 	/*
 	 * These use large bootmem allocations and must precede
 	 * kmem_cache_init()
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 72/86 s390: ctcm: fix ctcm_new_device error return code

In reply to Greg Kroah-Hartman

[ Upstream commit 27b141fc234a3670d21bd742c35d7205d03cbb3a ]

clang points out that the return code from this function is undefined for one of the error paths:

../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true

      [-Wsometimes-uninitialized]
                if (priv->channel[direction] == NULL) {
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here
        return result;
               ^~~~~~
../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false
                if (priv->channel[direction] == NULL) {
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning
        int result;
                  ^

Make it return -ENODEV here, as in the related failure cases. gcc has a known bug in underreporting some of these warnings when it has already eliminated the assignment of the return code based on some earlier optimization step.

---
 drivers/s390/net/ctcm_main.c | 1 +
 1 file changed, 1 insertion(+)
drivers/s390/net/ctcm_main.c +1 -0
index e056dd4fe44d1..5526388f905ec 100644
@@ -1595,6 +1595,7 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
 		if (priv->channel[direction] == NULL) {
 			if (direction == CTCM_WRITE)
 				channel_free(priv->channel[CTCM_READ]);
+			result = -ENODEV;
 			goto out_dev;
 		}
 		priv->channel[direction]->netdev = dev;
Signature · 1 line
2.20.1
author maintainer
#73 lore raw

PATCH 73/86 selftests/net: correct the return value for run_netsocktests

In reply to Greg Kroah-Hartman

[ Upstream commit 30c04d796b693e22405c38e9b78e9a364e4c77e6 ]

The run_netsocktests will be marked as passed regardless the actual test result from the ./socket:

    selftests: net: run_netsocktests
    ========================================
    --------------------
    running socket test
    --------------------
    [FAIL]
    ok 1..6 selftests: net: run_netsocktests [PASS]

This is because the test script itself has been successfully executed. Fix this by exit 1 when the test failed.

---
 tools/testing/selftests/net/run_netsocktests | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/net/run_netsocktests +1 -1
index c09a682df56ae..19486dab2379e 100644
@@ -6,7 +6,7 @@ echo "--------------------"
 ./socket
 if [ $? -ne 0 ]; then
 	echo "[FAIL]"
+	exit 1
 else
 	echo "[PASS]"
 fi
-
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 74/86 gpu: ipu-v3: dp: fix CSC handling

In reply to Greg Kroah-Hartman

[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ]

Initialize the flow input colorspaces to unknown and reset to that value when the channel gets disabled. This avoids the state getting mixed up with a previous mode.

Also keep the CSC settings for the background flow intact when disabling the foreground flow.

---
 drivers/gpu/ipu-v3/ipu-dp.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/ipu-v3/ipu-dp.c +9 -3
index 98686edbcdbb0..33de3a1bac49f 100644
@@ -195,7 +195,8 @@ int ipu_dp_setup_channel(struct ipu_dp *dp,
 		ipu_dp_csc_init(flow, flow->foreground.in_cs, flow->out_cs,
 				DP_COM_CONF_CSC_DEF_BOTH);
 	} else {
-		if (flow->foreground.in_cs == flow->out_cs)
+		if (flow->foreground.in_cs == IPUV3_COLORSPACE_UNKNOWN ||
+		    flow->foreground.in_cs == flow->out_cs)
 			/*
 			 * foreground identical to output, apply color
 			 * conversion on background
@@ -261,6 +262,8 @@ void ipu_dp_disable_channel(struct ipu_dp *dp)
 	struct ipu_dp_priv *priv = flow->priv;
 	u32 reg, csc;
 
+	dp->in_cs = IPUV3_COLORSPACE_UNKNOWN;
+
 	if (!dp->foreground)
 		return;
 
@@ -268,8 +271,9 @@ void ipu_dp_disable_channel(struct ipu_dp *dp)
 
 	reg = readl(flow->base + DP_COM_CONF);
 	csc = reg & DP_COM_CONF_CSC_DEF_MASK;
-	if (csc == DP_COM_CONF_CSC_DEF_FG)
-		reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+	reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+	if (csc == DP_COM_CONF_CSC_DEF_BOTH || csc == DP_COM_CONF_CSC_DEF_BG)
+		reg |= DP_COM_CONF_CSC_DEF_BG;
 
 	reg &= ~DP_COM_CONF_FG_EN;
 	writel(reg, flow->base + DP_COM_CONF);
@@ -350,6 +354,8 @@ int ipu_dp_init(struct ipu_soc *ipu, struct device *dev, unsigned long base)
 	mutex_init(&priv->mutex);
 
 	for (i = 0; i < IPUV3_NUM_FLOWS; i++) {
+		priv->flow[i].background.in_cs = IPUV3_COLORSPACE_UNKNOWN;
+		priv->flow[i].foreground.in_cs = IPUV3_COLORSPACE_UNKNOWN;
 		priv->flow[i].foreground.foreground = true;
 		priv->flow[i].base = priv->base + ipu_dp_flow_base[i];
 		priv->flow[i].priv = priv;
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 75/86 Dont jump to compute_result state from check_result state

In reply to Greg Kroah-Hartman

From: Nigel Croxon <[email protected]>

commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef upstream.

Changing state from check_state_check_result to check_state_compute_result not only is unsafe but also doesn't appear to serve a valid purpose. A raid6 check should only be pushing out extra writes if doing repair and a mis-match occurs. The stripe dev management will already try and do repair writes for failing sectors.

This patch makes the raid6 check_state_check_result handling work more like raid5's. If somehow too many failures for a check, just quit the check operation for the stripe. When any checks pass, don't try and use check_state_compute_result for a purpose it isn't needed for and is unsafe for. Just mark the stripe as in sync for passing its parity checks and let the stripe dev read/write code and the bad blocks list do their job handling I/O errors.

Repro steps from Xiao:

These are the steps to reproduce this problem:
1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c
2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1
3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6 sde is the disk created by scsi_debug
4. echo "2" >/sys/module/scsi_debug/parameters/opts
5. raid-check

It panic:

[ 4854.730899] md: data-check of RAID array md127
[ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current]
[ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error
[ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00
[ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0
[ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current]
[ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error
[ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00
[ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000
[ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current]
[ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error
[ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00
[ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000
[ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current]
[ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error
[ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00
[ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0
[ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1).
[ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1).
[ 4854.906201] ------------[ cut here ]------------
[ 4854.907341] kernel BUG at drivers/md/raid5.c:4190!

raid5.c:4190 above is this BUG_ON:

    handle_parity_checks6()
        ...
        BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */

Cc: <[email protected]> # v3.16+
OriginalAuthor: David Jeffery <[email protected]>

---
 drivers/md/raid5.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/md/raid5.c +4 -15
@@ -3414,26 +3414,15 @@ static void handle_parity_checks6(struct
 	case check_state_check_result:
 		sh->check_state = check_state_idle;
 
+		if (s->failed > 1)
+			break;
 		/* handle a successful check operation, if parity is correct
 		 * we are done.  Otherwise update the mismatch count and repair
 		 * parity if !MD_RECOVERY_CHECK
 		 */
 		if (sh->ops.zero_sum_result == 0) {
-			/* both parities are correct */
-			if (!s->failed)
-				set_bit(STRIPE_INSYNC, &sh->state);
-			else {
-				/* in contrast to the raid5 case we can validate
-				 * parity, but still have a failure to write
-				 * back
-				 */
-				sh->check_state = check_state_compute_result;
-				/* Returning at this point means that we may go
-				 * off and bring p and/or q uptodate again so
-				 * we make sure to check zero_sum_result again
-				 * to verify if p or q need writeback
-				 */
-			}
+			/* Any parity checked was correct */
+			set_bit(STRIPE_INSYNC, &sh->state);
 		} else {
 			atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
 			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
author maintainer
#76 lore raw

PATCH 76/86 USB: serial: use variable for status

In reply to Greg Kroah-Hartman

[ Upstream commit 3161da970d38cd6ed2ba8cadec93874d1d06e11e ]

This patch turns status in a variable read once from the URB. The long term plan is to deliver status to the callback. In addition it makes the code a bit more elegant.

---
 drivers/usb/serial/generic.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/usb/serial/generic.c +10 -8
index c44b911937e8d..a648fdca938a2 100644
@@ -350,6 +350,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
+	int status = urb->status;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
@@ -360,22 +361,22 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 
 	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
 							urb->actual_length);
-	switch (urb->status) {
+	switch (status) {
 	case 0:
 		break;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		return;
 	case -EPIPE:
 		dev_err(&port->dev, "%s - urb stopped: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		return;
 	default:
 		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		goto resubmit;
 	}
 
@@ -399,6 +400,7 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
@@ -410,22 +412,22 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	set_bit(i, &port->write_urbs_free);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	switch (urb->status) {
+	switch (status) {
 	case 0:
 		break;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		return;
 	case -EPIPE:
 		dev_err_console(port, "%s - urb stopped: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		return;
 	default:
 		dev_err_console(port, "%s - nonzero urb status: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		goto resubmit;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 77/86 USB: serial: fix unthrottle races

In reply to Greg Kroah-Hartman

[ Upstream commit 3f5edd58d040bfa4b74fb89bc02f0bc6b9cd06ab ]

Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle().

First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  process_urb();
	  smp_mb__before_atomic();
	  set_bit(i, free);		  if (test_and_clear_bit(i, free))
	  					  submit_urb();

Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  set_bit(i, free);		  throttled = 0;
	  smp_mb__after_atomic();	  smp_mb();
	  if (throttled)		  if (test_and_clear_bit(i, free))
	  	  return;			  submit_urb();

Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition.

Fixes d83b405383c9 ("USB: serial: add support for multiple read urbs")
---
 drivers/usb/serial/generic.c |   39 ++++++++++++++++++++++++++++++++-------
 1 file changed, 32 insertions(+), 7 deletions(-)
drivers/usb/serial/generic.c +32 -7
@@ -350,6 +350,7 @@ void usb_serial_generic_read_bulk_callba
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
+	bool stopped = false;
 	int status = urb->status;
 	int i;
 
@@ -357,33 +358,51 @@ void usb_serial_generic_read_bulk_callba
 		if (urb == port->read_urbs[i])
 			break;
 	}
-	set_bit(i, &port->read_urbs_free);
 
 	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
 							urb->actual_length);
 	switch (status) {
 	case 0:
+		usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+							data);
+		port->serial->type->process_read_urb(urb);
 		break;
 	case -ENOENT:
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
 							__func__, status);
-		return;
+		stopped = true;
+		break;
 	case -EPIPE:
 		dev_err(&port->dev, "%s - urb stopped: %d\n",
 							__func__, status);
-		return;
+		stopped = true;
+		break;
 	default:
 		dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
 							__func__, status);
-		goto resubmit;
+		break;
 	}
 
-	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
-	port->serial->type->process_read_urb(urb);
+	/*
+	 * Make sure URB processing is done before marking as free to avoid
+	 * racing with unthrottle() on another CPU. Matches the barriers
+	 * implied by the test_and_clear_bit() in
+	 * usb_serial_generic_submit_read_urb().
+	 */
+	smp_mb__before_atomic();
+	set_bit(i, &port->read_urbs_free);
+	/*
+	 * Make sure URB is marked as free before checking the throttled flag
+	 * to avoid racing with unthrottle() on another CPU. Matches the
+	 * smp_mb() in unthrottle().
+	 */
+	smp_mb__after_atomic();
+
+	if (stopped)
+		return;
 
-resubmit:
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = port->throttle_req;
@@ -458,6 +477,12 @@ void usb_serial_generic_unthrottle(struc
 	port->throttled = port->throttle_req = 0;
 	spin_unlock_irq(&port->lock);
 
+	/*
+	 * Matches the smp_mb__after_atomic() in
+	 * usb_serial_generic_read_bulk_callback().
+	 */
+	smp_mb();
+
 	if (was_throttled)
 		usb_serial_generic_submit_read_urbs(port, GFP_KERNEL);
 }
author maintainer
#78 lore raw

PATCH 78/86 bridge: Fix error path for kobject_init_and_add()

In reply to Greg Kroah-Hartman

From: "Tobin C. Harding" <[email protected]>

[ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ]

Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump).

Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree().

---
 net/bridge/br_if.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
net/bridge/br_if.c +6 -7
@@ -460,13 +460,15 @@ int br_add_if(struct net_bridge *br, str
 	call_netdevice_notifiers(NETDEV_JOIN, dev);
 
 	err = dev_set_allmulti(dev, 1);
-	if (err)
-		goto put_back;
+	if (err) {
+		kfree(p);	/* kobject not yet init'd, manually free */
+		goto err1;
+	}
 
 	err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
 				   SYSFS_BRIDGE_PORT_ATTR);
 	if (err)
-		goto err1;
+		goto err2;
 
 	err = br_sysfs_addif(p);
 	if (err)
@@ -531,12 +533,9 @@ err3:
 	sysfs_remove_link(br->ifobj, p->dev->name);
 err2:
 	kobject_put(&p->kobj);
-	p = NULL; /* kobject_put frees */
-err1:
 	dev_set_allmulti(dev, -1);
-put_back:
+err1:
 	dev_put(dev);
-	kfree(p);
 	return err;
 }
 
#79 lore raw

Re: [PATCH 3.18 78/86] bridge: Fix error path for kobject_init_and_add()

Quoted 3 lines · Greg Kroah-Hartman

From: "Tobin C. Harding" <[email protected]>

[ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ]

Greg you are not going to back port all of these kobject fixes are you? There is going to be a _lot_ of them. I'm not super comfortable generating all this work for you. And besides that, I keep making mistakes (reference to last nights find of double free in powerpc that you reviewed already), then we have to back port those too.

For the record I've been going through all uses of kobject and splitting them into categories

1. Broken
2. Too complex to immediately tell
3. Done correctly

I'm not getting many in category #3, let's hope that some in #1 and #2 are my misunderstanding and that many in #2 should be in #3. I'm having fun fixing them but I shudder at making life hard for other people.

Cheers,
Tobin.

author maintainer
#80 lore raw

Re: [PATCH 3.18 78/86] bridge: Fix error path for kobject_init_and_add()

Quoted 14 lines · Tobin C. Harding
Quoted 3 lines · Greg Kroah-Hartman

From: "Tobin C. Harding" <[email protected]>

[ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ]

Greg you are not going to back port all of these kobject fixes are you? There is going to be a _lot_ of them. I'm not super comfortable generating all this work for you. And besides that, I keep making mistakes (reference to last nights find of double free in powerpc that you reviewed already), then we have to back port those too.

For the record I've been going through all uses of kobject and splitting them into categories

Quoted 7 lines

1. Broken
2. Too complex to immediately tell
3. Done correctly

I'm not getting many in category #3, let's hope that some in #1 and #2 are my misunderstanding and that many in #2 should be in #3. I'm having fun fixing them but I shudder at making life hard for other people.

I took this one as it was forwarded on to me by David Miller as a fix to be queued up for networking issues.

If a maintainer wants to mark the patch for stable, I'll be glad to take it, but I'm not going to be going and digging all of these out by hand an backporting them :)

thanks,

greg k-h

author maintainer
#81 lore raw

PATCH 79/86 net: ucc_geth - fix Oops when changing number of buffers in the ring

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

[ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ]

When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only.

[   69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[   69.890172] Faulting instruction address: 0xc033e164
[   69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[   69.900494] BE PREEMPT CMPCPRO
[   69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[   69.915956] task: c0684310 task.stack: c06da000
[   69.920470] NIP:  c033e164 LR: c02e44d0 CTR: c02e41fc
[   69.925504] REGS: dfff1e20 TRAP: 0300   Not tainted  (4.14.115-00006-g179ade8ce3-dirty)
[   69.934161] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 22004428  XER: 20000000
[   69.940869] DAR: f0000100 DSISR: 20000000
[   69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[   69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[   69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[   69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[   69.978348] NIP [c033e164] skb_put+0x0/0x5c
[   69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[   69.987384] Call Trace:
[   69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[   69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[   70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[   70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[   70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[   70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[   70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[   70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[   70.027964]     LR = rcu_idle_exit+0x74/0x90
[   70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[   70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[   70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[   70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[   70.059153] [c06dbff0] [00003438] 0x3438
[   70.063062] Instruction dump:
[   70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[   70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[   70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---

This patch forbids the modification of the number of buffers in the ring while the interface is running.

Fixes ac421852b3a0 ("ucc_geth: add ethtool support")
---
 drivers/net/ethernet/freescale/ucc_geth_ethtool.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/net/ethernet/freescale/ucc_geth_ethtool.c +3 -5
@@ -253,14 +253,12 @@ uec_set_ringparam(struct net_device *net
 		return -EINVAL;
 	}
 
+	if (netif_running(netdev))
+		return -EBUSY;
+
 	ug_info->bdRingLenRx[queue] = ring->rx_pending;
 	ug_info->bdRingLenTx[queue] = ring->tx_pending;
 
-	if (netif_running(netdev)) {
-		/* FIXME: restart automatically */
-		netdev_info(netdev, "Please re-open the interface\n");
-	}
-
 	return ret;
 }
 
author maintainer
#82 lore raw

PATCH 80/86 packet: Fix error path in packet_init

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 36096f2f4fa05f7678bc87397665491700bae757 ]

kernel BUG at lib/list_debug.c:47!
invalid opcode: 0000 [#1

CPU: 0 PID: 12914 Comm: rmmod Tainted: G        W         5.1.0+ #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_del_entry_valid+0x53/0x90
Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48
89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2
RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286
RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff
RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000
FS:  00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0
Call Trace:
 unregister_pernet_operations+0x34/0x120
 unregister_pernet_subsys+0x1c/0x30
 packet_exit+0x1c/0x369 [af_packet
 __x64_sys_delete_module+0x156/0x260
 ? lockdep_hardirqs_on+0x133/0x1b0
 ? do_syscall_64+0x12/0x1f0
 do_syscall_64+0x6e/0x1f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

When modprobe af_packet, register_pernet_subsys
fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur.

---
 net/packet/af_packet.c |   25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)
net/packet/af_packet.c +20 -5
@@ -4200,14 +4200,29 @@ static void __exit packet_exit(void)
 
 static int __init packet_init(void)
 {
-	int rc = proto_register(&packet_proto, 0);
+	int rc;
 
-	if (rc != 0)
+	rc = proto_register(&packet_proto, 0);
+	if (rc)
 		goto out;
+	rc = sock_register(&packet_family_ops);
+	if (rc)
+		goto out_proto;
+	rc = register_pernet_subsys(&packet_net_ops);
+	if (rc)
+		goto out_sock;
+	rc = register_netdevice_notifier(&packet_netdev_notifier);
+	if (rc)
+		goto out_pernet;
 
-	sock_register(&packet_family_ops);
-	register_pernet_subsys(&packet_net_ops);
-	register_netdevice_notifier(&packet_netdev_notifier);
+	return 0;
+
+out_pernet:
+	unregister_pernet_subsys(&packet_net_ops);
+out_sock:
+	sock_unregister(PF_PACKET);
+out_proto:
+	proto_unregister(&packet_proto);
 out:
 	return rc;
 }
author maintainer
#83 lore raw

PATCH 81/86 vlan: disable SIOCSHWTSTAMP in container

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit 873017af778439f2f8e3d87f28ddb1fcaf244a76 ]

With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container.

Fixes a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device")
---
 net/8021q/vlan_dev.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/8021q/vlan_dev.c +3 -1
@@ -394,10 +394,12 @@ static int vlan_dev_ioctl(struct net_dev
 	ifrr.ifr_ifru = ifr->ifr_ifru;
 
 	switch (cmd) {
+	case SIOCSHWTSTAMP:
+		if (!net_eq(dev_net(dev), &init_net))
+			break;
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
-	case SIOCSHWTSTAMP:
 	case SIOCGHWTSTAMP:
 		if (netif_device_present(real_dev) && ops->ndo_do_ioctl)
 			err = ops->ndo_do_ioctl(real_dev, &ifrr, cmd);
author maintainer
#84 lore raw

PATCH 82/86 ipv4: Fix raw socket lookup for local traffic

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

[ Upstream commit 19e4e768064a87b073a4b4c138b55db70e0cfb9f ]

inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic.

As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO.

IPv6 works fine.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/raw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/ipv4/raw.c +2 -2
@@ -158,6 +158,7 @@ static int icmp_filter(const struct sock
  */
 static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash)
 {
+	int dif = inet_iif(skb);
 	struct sock *sk;
 	struct hlist_head *head;
 	int delivered = 0;
@@ -170,8 +171,7 @@ static int raw_v4_input(struct sk_buff *
 
 	net = dev_net(skb->dev);
 	sk = __raw_v4_lookup(net, __sk_head(head), iph->protocol,
-			     iph->saddr, iph->daddr,
-			     skb->dev->ifindex);
+			     iph->saddr, iph->daddr, dif);
 
 	while (sk) {
 		delivered = 1;
author maintainer
#85 lore raw

PATCH 83/86 bonding: fix arp_validate toggling in active-backup mode

In reply to Greg Kroah-Hartman

From: Jarod Wilson <[email protected]>

[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ]

There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so:

modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0

Pings to 192.168.1.1 work just fine. Now turn on arp_validate:

echo 1 > /sys/class/net/bond0/bonding/arp_validate

Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face:

echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg
...

[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!

The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df97c7f, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well.

One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here.

Fixes 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
CC "David S. Miller" <[email protected]>
---
 drivers/net/bonding/bond_options.c |    7 -------
 1 file changed, 7 deletions(-)
drivers/net/bonding/bond_options.c +0 -7
@@ -1032,13 +1032,6 @@ static int bond_option_arp_validate_set(
 {
 	netdev_info(bond->dev, "Setting arp_validate to %s (%llu)\n",
 		    newval->string, newval->value);
-
-	if (bond->dev->flags & IFF_UP) {
-		if (!newval->value)
-			bond->recv_probe = NULL;
-		else if (bond->params.arp_interval)
-			bond->recv_probe = bond_arp_rcv;
-	}
 	bond->params.arp_validate = newval->value;
 
 	return 0;
author maintainer
#86 lore raw

PATCH 84/86 drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit c8ea3663f7a8e6996d44500ee818c9330ac4fd88 upstream.

strndup_user() returns error pointers on error, and then in the error handling we pass the error pointers to kfree(). It will cause an Oops.

Fixes 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Cc Timur Tabi <[email protected]>
Cc Mihai Caraman <[email protected]>
Cc Kumar Gala <[email protected]>
---
 drivers/virt/fsl_hypervisor.c |   26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/virt/fsl_hypervisor.c +13 -13
@@ -335,8 +335,8 @@ static long ioctl_dtprop(struct fsl_hv_i
 	struct fsl_hv_ioctl_prop param;
 	char __user *upath, *upropname;
 	void __user *upropval;
-	char *path = NULL, *propname = NULL;
-	void *propval = NULL;
+	char *path, *propname;
+	void *propval;
 	int ret = 0;
 
 	/* Get the parameters from the user. */
@@ -348,32 +348,30 @@ static long ioctl_dtprop(struct fsl_hv_i
 	upropval = (void __user *)(uintptr_t)param.propval;
 
 	path = strndup_user(upath, FH_DTPROP_MAX_PATHLEN);
-	if (IS_ERR(path)) {
-		ret = PTR_ERR(path);
-		goto out;
-	}
+	if (IS_ERR(path))
+		return PTR_ERR(path);
 
 	propname = strndup_user(upropname, FH_DTPROP_MAX_PATHLEN);
 	if (IS_ERR(propname)) {
 		ret = PTR_ERR(propname);
-		goto out;
+		goto err_free_path;
 	}
 
 	if (param.proplen > FH_DTPROP_MAX_PROPLEN) {
 		ret = -EINVAL;
-		goto out;
+		goto err_free_propname;
 	}
 
 	propval = kmalloc(param.proplen, GFP_KERNEL);
 	if (!propval) {
 		ret = -ENOMEM;
-		goto out;
+		goto err_free_propname;
 	}
 
 	if (set) {
 		if (copy_from_user(propval, upropval, param.proplen)) {
 			ret = -EFAULT;
-			goto out;
+			goto err_free_propval;
 		}
 
 		param.ret = fh_partition_set_dtprop(param.handle,
@@ -392,7 +390,7 @@ static long ioctl_dtprop(struct fsl_hv_i
 			if (copy_to_user(upropval, propval, param.proplen) ||
 			    put_user(param.proplen, &p->proplen)) {
 				ret = -EFAULT;
-				goto out;
+				goto err_free_propval;
 			}
 		}
 	}
@@ -400,10 +398,12 @@ static long ioctl_dtprop(struct fsl_hv_i
 	if (put_user(param.ret, &p->ret))
 		ret = -EFAULT;
 
-out:
-	kfree(path);
+err_free_propval:
 	kfree(propval);
+err_free_propname:
 	kfree(propname);
+err_free_path:
+	kfree(path);
 
 	return ret;
 }
author maintainer
#87 lore raw

PATCH 85/86 drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 6a024330650e24556b8a18cc654ad00cfecf6c6c upstream.

The "param.count" value is a u64 thatcomes from the user. The code later in the function assumes that param.count is at least one and if it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR.

Also the addition can have an integer overflow which would lead us to allocate a smaller "pages" array than required. I can't immediately tell what the possible run times implications are, but it's safest to prevent the overflow.

Fixes 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Cc Timur Tabi <[email protected]>
Cc Mihai Caraman <[email protected]>
Cc Kumar Gala <[email protected]>
---
 drivers/virt/fsl_hypervisor.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/virt/fsl_hypervisor.c +3 -0
@@ -215,6 +215,9 @@ static long ioctl_memcpy(struct fsl_hv_i
 	 * hypervisor.
 	 */
 	lb_offset = param.local_vaddr & (PAGE_SIZE - 1);
+	if (param.count == 0 ||
+	    param.count > U64_MAX - lb_offset - PAGE_SIZE + 1)
+		return -EINVAL;
 	num_pages = (param.count + lb_offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
 	/* Allocate the buffers we need */
author maintainer
#88 lore raw

PATCH 86/86 powerpc/booke64: set RI in default MSR

In reply to Greg Kroah-Hartman

From: Laurentiu Tudor <[email protected]>

commit 5266e58d6cd90ac85c187d673093ad9cb649e16d upstream.

Set RI in the default kernel's MSR so that the architected way of detecting unrecoverable machine check interrupts has a chance to work. This is inline with the MSR setup of the rest of booke powerpc architectures configured here.

---
 arch/powerpc/include/asm/reg_booke.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/include/asm/reg_booke.h +1 -1
@@ -41,7 +41,7 @@
 #if defined(CONFIG_PPC_BOOK3E_64)
 #define MSR_64BIT	MSR_CM
 
-#define MSR_		(MSR_ME | MSR_CE)
+#define MSR_		(MSR_ME | MSR_RI | MSR_CE)
 #define MSR_KERNEL	(MSR_ | MSR_64BIT)
 #define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
 #define MSR_USER64	(MSR_USER32 | MSR_64BIT)
#89 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-3.18.y boot: 59 boots: 5 failed, 51 passed with 2 offline, 1 conflict (v3.18.139-87-g06310902672a)

stable-rc/linux-3.18.y boot: 59 boots: 5 failed, 51 passed with 2 offline, 1 conflict (v3.18.139-87-g06310902672a)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-3.18.y/kernel/v3.18.139-87-g06310902672a/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-3.18.y/kernel/v3.18.139-87-g06310902672a/

Tree: stable-rc
Branch: linux-3.18.y
Git Describe: v3.18.139-87-g06310902672a
Git Commit: 06310902672a635a9042eb91b9f696da27d731eb
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 24 unique boards, 12 SoC families, 13 builds out of 189

Boot Regressions Detected:

arm:

    omap2plus_defconfig:
        gcc-8:
          omap4-panda:
              lab-baylibre: new failure (last pass: v3.18.139-76-gd3d7f4845dc0)

Boot Failures Detected:

x86_64:
x86_64_defconfig:
gcc-8:
minnowboard-turbot-E3826: 1 failed lab
qemu: 4 failed labs

Offline Platforms:

arm:

    tegra_defconfig:
        gcc-8
            tegra20-iris-512: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            tegra20-iris-512: 1 offline lab

Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)

arm:
omap2plus_defconfig:
omap4-panda:
lab-baylibre: FAIL (gcc-8)
lab-baylibre-seattle: PASS (gcc-8)

---
For more info write to <[email protected]>

#90 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.18.140 release. There are 86 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:45 AM UTC. Anything received after that time might be too late.

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 230 pass: 230 fail: 0

Guenter

#91 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.18.140 release. There are 86 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:45 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.140-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

author maintainer
#92 lore raw
Quoted 15 lines · shuah
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 3.18.140 release. There are 86 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri 17 May 2019 09:04:45 AM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.140-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 4 lines

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

Wonderful, thanks!

greg k-h