dt-bindings: arm: amlogic: Move 'amlogic,meson-gx-ao-secure' binding to its own file
Subsystems (2)
Rob Herring
maintainerPATCH v3 1/2 dt-bindings: arm: amlogic: Move 'amlogic,meson-gx-ao-secure' binding to its own file
It is best practice to have 1 binding per file, so board level bindings should be separate for various misc SoC bindings.
---
It seems this one fell thru the cracks and didn't get applied.
.../devicetree/bindings/arm/amlogic.txt | 29 ------------------- .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++ 2 files changed, 28 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
Documentation/devicetree/bindings/arm/amlogic.txt +0 -29
@@ -111,32 +111,3 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,u200" (Meson g12a s905d2) - "amediatech,x96-max" (Meson g12a s905x2) - "seirobotics,sei510" (Meson g12a s905x2) - -Amlogic Meson Firmware registers Interface ------------------------------------------- - -The Meson SoCs have a register bank with status and data shared with the -secure firmware. - -Required properties: - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" - -Properties should indentify components of this register interface : - -Meson GX SoC Information ------------------------- -A firmware register encodes the SoC type, package and revision information on -the Meson GX SoCs. -If present, the following property should be added : - -Optional properties: - - amlogic,has-chip-id: If present, the interface gives the current SoC version. - -Example -------- - -ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; -};
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt new file +28 -0
@@ -0,0 +1,28 @@ +Amlogic Meson Firmware registers Interface +------------------------------------------ + +The Meson SoCs have a register bank with status and data shared with the +secure firmware. + +Required properties: + - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" + +Properties should indentify components of this register interface : + +Meson GX SoC Information +------------------------ +A firmware register encodes the SoC type, package and revision information on +the Meson GX SoCs. +If present, the following property should be added : + +Optional properties: + - amlogic,has-chip-id: If present, the interface gives the current SoC version. + +Example +------- + +ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; +};
Signature · 1 line
2.20.1
Rob Herring
maintainerPATCH v3 2/2 dt-bindings: arm: Convert Amlogic board/soc bindings to json-schema
Convert Amlogic SoC bindings to DT schema format using json-schema.
---
v3:
- Add board descriptions
- Rebase onto Linus' master
.../devicetree/bindings/arm/amlogic.txt | 113 -------------- .../devicetree/bindings/arm/amlogic.yaml | 140 ++++++++++++++++++ 2 files changed, 140 insertions(+), 113 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/amlogic.txt create mode 100644 Documentation/devicetree/bindings/arm/amlogic.yaml
Documentation/devicetree/bindings/arm/amlogic.txt deleted +0 -113
@@ -1,113 +0,0 @@ -Amlogic MesonX device tree bindings -------------------------------------------- - -Work in progress statement: - -Device tree files and bindings applying to Amlogic SoCs and boards are -considered "unstable". Any Amlogic device tree binding may change at -any time. Be sure to use a device tree binary and a kernel image -generated from the same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - -Boards with the Amlogic Meson6 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson6" - -Boards with the Amlogic Meson8 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8"; - -Boards with the Amlogic Meson8b SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8b"; - -Boards with the Amlogic Meson8m2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8m2"; - -Boards with the Amlogic Meson GXBaby SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson-gxbb"; - -Boards with the Amlogic Meson GXL S905X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905d", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s805x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905W SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905w", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s912", "amlogic,meson-gxm"; - -Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,a113d", "amlogic,meson-axg"; - -Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,g12a"; - -Board compatible values (alphabetically, grouped by SoC): - - - "geniatech,atv1200" (Meson6) - - - "minix,neo-x8" (Meson8) - - - "endless,ec100" (Meson8b) - - "hardkernel,odroid-c1" (Meson8b) - - "tronfy,mxq" (Meson8b) - - - "tronsmart,mxiii-plus" (Meson8m2) - - - "amlogic,p200" (Meson gxbb) - - "amlogic,p201" (Meson gxbb) - - "friendlyarm,nanopi-k2" (Meson gxbb) - - "hardkernel,odroid-c2" (Meson gxbb) - - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) - - "wetek,hub" (Meson gxbb) - - "wetek,play2" (Meson gxbb) - - - "amlogic,p212" (Meson gxl s905x) - - "hwacom,amazetv" (Meson gxl s905x) - - "khadas,vim" (Meson gxl s905x) - - "libretech,cc" (Meson gxl s905x) - - - "amlogic,p230" (Meson gxl s905d) - - "amlogic,p231" (Meson gxl s905d) - - "phicomm,n1" (Meson gxl s905d) - - - "amlogic,p241" (Meson gxl s805x) - - "libretech,aml-s805x-ac" (Meson gxl s805x) - - - "amlogic,p281" (Meson gxl s905w) - - "oranth,tx3-mini" (Meson gxl s905w) - - - "amlogic,q200" (Meson gxm s912) - - "amlogic,q201" (Meson gxm s912) - - "khadas,vim2" (Meson gxm s912) - - "kingnovel,r-box-pro" (Meson gxm S912) - - "nexbox,a1" (Meson gxm s912) - - "tronsmart,vega-s96" (Meson gxm s912) - - - "amlogic,s400" (Meson axg a113d) - - - "amlogic,u200" (Meson g12a s905d2) - - "amediatech,x96-max" (Meson g12a s905x2) - - "seirobotics,sei510" (Meson g12a s905x2)
Documentation/devicetree/bindings/arm/amlogic.yaml new file +140 -0
140 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [PATCH v3 2/2] dt-bindings: arm: Convert Amlogic board/soc bindings to json-schema
Quoted 145 lines · Rob Herring
Convert Amlogic SoC bindings to DT schema format using json-schema.
Cc Carlo Caione <[email protected]>Cc Kevin Hilman <[email protected]>Cc Mark Rutland <[email protected]>Signed-off-by Rob Herring <[email protected]>---
v3:
- Add board descriptions
- Rebase onto Linus' master.../devicetree/bindings/arm/amlogic.txt | 113 -------------- .../devicetree/bindings/arm/amlogic.yaml | 140 ++++++++++++++++++ 2 files changed, 140 insertions(+), 113 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/amlogic.txt create mode 100644 Documentation/devicetree/bindings/arm/amlogic.yamlDocumentation/devicetree/bindings/arm/amlogic.txt deleted +0
-113@@ -1,113 +0,0 @@ -Amlogic MesonX device tree bindings -------------------------------------------- - -Work in progress statement: - -Device tree files and bindings applying to Amlogic SoCs and boards are -considered "unstable". Any Amlogic device tree binding may change at -any time. Be sure to use a device tree binary and a kernel image -generated from the same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - -Boards with the Amlogic Meson6 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson6" - -Boards with the Amlogic Meson8 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8"; - -Boards with the Amlogic Meson8b SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8b"; - -Boards with the Amlogic Meson8m2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8m2"; - -Boards with the Amlogic Meson GXBaby SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson-gxbb"; - -Boards with the Amlogic Meson GXL S905X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905d", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s805x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905W SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905w", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s912", "amlogic,meson-gxm"; - -Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,a113d", "amlogic,meson-axg"; - -Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,g12a"; - -Board compatible values (alphabetically, grouped by SoC): - - - "geniatech,atv1200" (Meson6) - - - "minix,neo-x8" (Meson8) - - - "endless,ec100" (Meson8b) - - "hardkernel,odroid-c1" (Meson8b) - - "tronfy,mxq" (Meson8b) - - - "tronsmart,mxiii-plus" (Meson8m2) - - - "amlogic,p200" (Meson gxbb) - - "amlogic,p201" (Meson gxbb) - - "friendlyarm,nanopi-k2" (Meson gxbb) - - "hardkernel,odroid-c2" (Meson gxbb) - - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) - - "wetek,hub" (Meson gxbb) - - "wetek,play2" (Meson gxbb) - - - "amlogic,p212" (Meson gxl s905x) - - "hwacom,amazetv" (Meson gxl s905x) - - "khadas,vim" (Meson gxl s905x) - - "libretech,cc" (Meson gxl s905x) - - - "amlogic,p230" (Meson gxl s905d) - - "amlogic,p231" (Meson gxl s905d) - - "phicomm,n1" (Meson gxl s905d) - - - "amlogic,p241" (Meson gxl s805x) - - "libretech,aml-s805x-ac" (Meson gxl s805x) - - - "amlogic,p281" (Meson gxl s905w) - - "oranth,tx3-mini" (Meson gxl s905w) - - - "amlogic,q200" (Meson gxm s912) - - "amlogic,q201" (Meson gxm s912) - - "khadas,vim2" (Meson gxm s912) - - "kingnovel,r-box-pro" (Meson gxm S912) - - "nexbox,a1" (Meson gxm s912) - - "tronsmart,vega-s96" (Meson gxm s912) - - - "amlogic,s400" (Meson axg a113d) - - - "amlogic,u200" (Meson g12a s905d2) - - "amediatech,x96-max" (Meson g12a s905x2) - - "seirobotics,sei510" (Meson g12a s905x2)Documentation/devicetree/bindings/arm/amlogic.yaml new file +2
-0@@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2
Documentation/devicetree/bindings/arm/amlogic.yaml line 12
Quoted 10 lines
Documentation/devicetree/bindings/arm/amlogic.yaml new file +10
-0+--- +$id: http://devicetree.org/schemas/arm/amlogic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic MesonX device tree bindings + +maintainers: + - Neil Armstrong <[email protected]> + - Carlo Caione <[email protected]> + - Kevin Hilman <[email protected]>
Please drop Carlo and me.
Quoted 119 lines
Documentation/devicetree/bindings/arm/amlogic.yaml new file +118
-0+ +description: |+ + Work in progress statement: + + Device tree files and bindings applying to Amlogic SoCs and boards are + considered "unstable". Any Amlogic device tree binding may change at + any time. Be sure to use a device tree binary and a kernel image + generated from the same source tree. + + Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a + stable binding/ABI. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Boards with the Amlogic Meson6 SoC + items: + - enum: + - geniatech,atv1200 + - const: amlogic,meson6 + + - description: Boards with the Amlogic Meson8 SoC + items: + - enum: + - minix,neo-x8 + - const: amlogic,meson8 + + - description: Boards with the Amlogic Meson8m2 SoC + items: + - enum: + - tronsmart,mxiii-plus + - const: amlogic,meson8m2 + + - description: Boards with the Amlogic Meson8b SoC + items: + - enum: + - endless,ec100 + - hardkernel,odroid-c1 + - tronfy,mxq + - const: amlogic,meson8b + + - description: Boards with the Amlogic Meson GXBaby SoC + items: + - enum: + - amlogic,p200 + - amlogic,p201 + - friendlyarm,nanopi-k2 + - hardkernel,odroid-c2 + - nexbox,a95x + - wetek,hub + - wetek,play2 + - const: amlogic,meson-gxbb + + - description: Tronsmart Vega S95 devices + items: + - enum: + - tronsmart,vega-s95-pro + - tronsmart,vega-s95-meta + - tronsmart,vega-s95-telos + - const: tronsmart,vega-s95 + - const: amlogic,meson-gxbb + + - description: Boards with the Amlogic Meson GXL S805X SoC + items: + - enum: + - amlogic,p241 + - libretech,aml-s805x-ac + - const: amlogic,s805x + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905W SoC + items: + - enum: + - amlogic,p281 + - oranth,tx3-mini + - const: amlogic,s905w + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905X SoC + items: + - enum: + - amediatech,x96-max + - amlogic,p212 + - hwacom,amazetv + - khadas,vim + - libretech,cc + - nexbox,a95x + - seirobotics,sei510 + - const: amlogic,s905x + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905D SoC + items: + - enum: + - amlogic,p230 + - amlogic,p231 + - phicomm,n1 + - const: amlogic,s905d + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXM S912 SoC + items: + - enum: + - amlogic,q200 + - amlogic,q201 + - khadas,vim2 + - kingnovel,r-box-pro + - nexbox,a1 + - tronsmart,vega-s96 + - const: amlogic,s912 + - const: amlogic,meson-gxm + + - description: Boards with the Amlogic Meson AXG A113D SoC + items: + - enum: + - amlogic,s400
Documentation/devicetree/bindings/arm/amlogic.yaml line 140
Quoted 10 lines
Documentation/devicetree/bindings/arm/amlogic.yaml new file +10
-0+ - const: amlogic,a113d + - const: amlogic,meson-axg + + - description: Boards with the Amlogic Meson G12A S905D2 SoC + items: + - enum: + - amlogic,u200 + - const: amlogic,g12a + +...
Otherwise looks fine.
With carlo and me removed from the maintainers :
Neil
Quoted 79 lines · Rob Herring
It is best practice to have 1 binding per file, so board level bindings should be separate for various misc SoC bindings.
Cc Mark Rutland <[email protected]>Cc Carlo Caione <[email protected]>Cc Kevin Hilman <[email protected]>Signed-off-by Rob Herring <[email protected]>---
It seems this one fell thru the cracks and didn't get applied..../devicetree/bindings/arm/amlogic.txt | 29 ------------------- .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++ 2 files changed, 28 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txtDocumentation/devicetree/bindings/arm/amlogic.txt +0
-29@@ -111,32 +111,3 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,u200" (Meson g12a s905d2) - "amediatech,x96-max" (Meson g12a s905x2) - "seirobotics,sei510" (Meson g12a s905x2) - -Amlogic Meson Firmware registers Interface ------------------------------------------- - -The Meson SoCs have a register bank with status and data shared with the -secure firmware. - -Required properties: - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" - -Properties should indentify components of this register interface : - -Meson GX SoC Information ------------------------- -A firmware register encodes the SoC type, package and revision information on -the Meson GX SoCs. -If present, the following property should be added : - -Optional properties: - - amlogic,has-chip-id: If present, the interface gives the current SoC version. - -Example -------- - -ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; -};Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt new file +18
-0@@ -0,0 +1,28 @@ +Amlogic Meson Firmware registers Interface +------------------------------------------ + +The Meson SoCs have a register bank with status and data shared with the +secure firmware. + +Required properties: + - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" + +Properties should indentify components of this register interface : + +Meson GX SoC Information +------------------------ +A firmware register encodes the SoC type, package and revision information on +the Meson GX SoCs. +If present, the following property should be added : + +Optional properties:
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt line 28
Quoted 10 lines
Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt new file +10
-0+ - amlogic,has-chip-id: If present, the interface gives the current SoC version. + +Example +------- + +ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; +};
Quoted 10 lines · Rob Herring
It is best practice to have 1 binding per file, so board level bindings should be separate for various misc SoC bindings.
Cc Mark Rutland <[email protected]>Cc Carlo Caione <[email protected]>Cc Kevin Hilman <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 2 lines
---
It seems this one fell thru the cracks and didn't get applied.
Feel free to apply directly.