fix bcm6345 watchdog on broadcom board
cover fix bcm6345 watchdog on broadcom board
Since the commit: commit 06985289d452 ("watchdog: Implement generic watchdog_reset() version"), the watchdog is always started and a default timeout of 60000 ms is used. But the driver for the bcm6345 watchdog use this timeout in ms as tick. So a board using this driver reboot immediately.
The first commit in this serie fix the driver of the bcm6345 watchdog by converting the timeout in ms to tick before writing the register. The two others commits fix the clock used by boards bcm96858xref and bcm963158.
This serie was tested on:
- bcm6838 (mips)
- bcm96858xref (arm)
- bcm963158 (arm)
Philippe Reynes (3):
watchdog: bcm6345: callback start use tick instead of ms
dt: bcm6858: watchdog should use a 50Mhz clock
dt: bcm63158: watchdog should use a 50Mhz clock
arch/arm/dts/bcm63158.dtsi | 10 ++++++++-- arch/arm/dts/bcm6858.dtsi | 10 ++++++++-- drivers/watchdog/bcm6345_wdt.c | 21 ++++++++++++++++----- 3 files changed, 32 insertions(+), 9 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/3 watchdog: bcm6345: callback start use tick instead of ms
The function bcm6345_wdt_start use the argument timeout as tick but it should be used as milliseconds.
A clock is added as requirement for this driver. The frequency of the clock is then used to convert the millisecond to ticks in the function bcm6345_wdt_start.
--- drivers/watchdog/bcm6345_wdt.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
drivers/watchdog/bcm6345_wdt.c +16 -5
@@ -10,6 +10,7 @@#include <common.h> #include <dm.h> #include <wdt.h> +#include <clk.h> #include <asm/io.h> /* WDT Value register */
@@ -26,6 +27,7 @@struct bcm6345_wdt_priv {void __iomem *regs; +unsigned long clk_rate; };static int bcm6345_wdt_reset (struct udevice *dev)
@@ -41,16 +43,17 @@ static int bcm6345_wdt_reset(struct udevice *dev)static int bcm6345_wdt_start (struct udevice *dev,u64 timeout,ulong flags) {struct bcm6345_wdt_priv *priv =dev_get_priv (dev); +u32 val = priv->clk_rate /1000 * timeout; -if (timeout <WDT_VAL_MIN ) { +if (val <WDT_VAL_MIN ) {debug ("watchdog won't fire with less than 2 ticks\n" ); - timeout =WDT_VAL_MIN ; - }else if (timeout >WDT_VAL_MAX ) { + val =WDT_VAL_MIN ; + }else if (val >WDT_VAL_MAX ) {debug ("maximum watchdog timeout exceeded\n" ); - timeout =WDT_VAL_MAX ; + val =WDT_VAL_MAX ; } -writel (timeout, priv->regs +WDT_VAL_REG ); +writel (val, priv->regs +WDT_VAL_REG );return bcm6345_wdt_reset (dev); }
@@ -85,11 +88,19 @@ static const struct udevice_id bcm6345_wdt_ids[] = {static int bcm6345_wdt_probe (struct udevice *dev) {struct bcm6345_wdt_priv *priv =dev_get_priv (dev); +struct clk clk; +int ret; priv->regs =dev_remap_addr (dev);if (!priv->regs)return -EINVAL ; + ret =clk_get_by_index (dev,0 , &clk); +if (!ret) + priv->clk_rate =clk_get_rate (&clk); +else +return -EINVAL ; +bcm6345_wdt_stop (dev);return 0 ;
Signature · 1 line
2.7.4
PATCH 1/3 watchdog: bcm6345: callback start use tick instead of ms
Quoted 8 lines · Philippe Reynes
The function
bcm6345_wdt_startuse the argument timeout as tick but it should be used as milliseconds.A clock is added as requirement for this driver. The frequency of the clock is then used to convert the millisecond to ticks in the function
bcm6345_wdt_start.Signed-off-by Philippe Reynes <[email protected]>
You might want to emphasize, that this is a pretty severe fix to this driver, as without this patch, boards using this driver will end in a endless reboot loop. So it should be applied to this release.
Thanks,
Stefan
Quoted 58 lines
--- drivers/watchdog/bcm6345_wdt.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)drivers/watchdog/bcm6345_wdt.c +10
-5@@ -10,6 +10,7 @@#include <common.h> #include <dm.h> #include <wdt.h> +#include <clk.h> #include <asm/io.h> /* WDT Value register */ @@ -26,6 +27,7 @@struct bcm6345_wdt_priv {void __iomem *regs; +unsigned long clk_rate; };static int bcm6345_wdt_reset (struct udevice *dev)@@ -41,16 +43,17 @@ static int bcm6345_wdt_reset(struct udevice *dev)static int bcm6345_wdt_start (struct udevice *dev,u64 timeout,ulong flags) {struct bcm6345_wdt_priv *priv =dev_get_priv (dev); +u32 val = priv->clk_rate /1000 * timeout; -if (timeout <WDT_VAL_MIN ) { +if (val <WDT_VAL_MIN ) {debug ("watchdog won't fire with less than 2 ticks\n" ); - timeout =WDT_VAL_MIN ; - }else if (timeout >WDT_VAL_MAX ) { + val =WDT_VAL_MIN ; + }else if (val >WDT_VAL_MAX ) {debug ("maximum watchdog timeout exceeded\n" ); - timeout =WDT_VAL_MAX ; + val =WDT_VAL_MAX ; } -writel (timeout, priv->regs +WDT_VAL_REG ); +writel (val, priv->regs +WDT_VAL_REG );return bcm6345_wdt_reset (dev); }@@ -85,11 +88,19 @@ static const struct udevice_id bcm6345_wdt_ids[] = {static int bcm6345_wdt_probe (struct udevice *dev) {struct bcm6345_wdt_priv *priv =dev_get_priv (dev); +struct clk clk; +int ret; priv->regs =dev_remap_addr (dev);if (!priv->regs)return -EINVAL ;
drivers/watchdog/bcm6345_wdt.c static const struct udevice_id bcm6345_wdt_ids[] = { · line 106
Quoted 10 lines
drivers/watchdog/bcm6345_wdt.c +6
-0+ ret =clk_get_by_index (dev,0 , &clk); +if (!ret) + priv->clk_rate =clk_get_rate (&clk); +else +return -EINVAL ; +bcm6345_wdt_stop (dev);return 0 ;
Viele Grüße,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH 1/3 watchdog: bcm6345: callback start use tick instead of ms
In reply to Philippe ReynesQuoted 9 lines · Philippe Reynes
The function
bcm6345_wdt_startuse the argument timeout as tick but it should be used as milliseconds.A clock is added as requirement for this driver. The frequency of the clock is then used to convert the millisecond to ticks in the function
bcm6345_wdt_start.Signed-off-by Philippe Reynes <[email protected]>Reviewed-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190519/a2ddd695/attachment.sig>
PATCH 2/3 dt: bcm6858: watchdog should use a 50Mhz clock
In reply to Philippe ReynesThe watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.
--- arch/arm/dts/bcm6858.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
arch/arm/dts/bcm6858.dtsi +8 -2
@@ -66,6 +66,12 @@ clock-frequency = <200000000>; u-boot,dm-pre-reloc; }; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; }; ubus {
@@ -92,13 +98,13 @@ wdt1: watchdog at ff802780 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff802780 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt2: watchdog at ff8027c0 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff8027c0 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt-reboot {
Signature · 1 line
2.7.4
PATCH 2/3 dt: bcm6858: watchdog should use a 50Mhz clock
Quoted 4 lines · Philippe Reynes
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.
Just curious: Why is this the case? Is this also what's done in the Linux DT version?
Other than that:
Thanks,
Stefan
Quoted 29 lines
Signed-off-by Philippe Reynes <[email protected]>--- arch/arm/dts/bcm6858.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)arch/arm/dts/bcm6858.dtsi +7
-1@@ -66,6 +66,12 @@ clock-frequency = <200000000>; u-boot,dm-pre-reloc; }; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; }; ubus {@@ -92,13 +98,13 @@ wdt1: watchdog at ff802780 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff802780 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>;
arch/arm/dts/bcm6858.dtsi line 110
Quoted 10 lines
arch/arm/dts/bcm6858.dtsi +1
-1}; wdt2: watchdog at ff8027c0 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff8027c0 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt-reboot {
Viele Grüße,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH 2/3 dt: bcm6858: watchdog should use a 50Mhz clock
In reply to Philippe ReynesQuoted 7 lines · Philippe Reynes
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.Signed-off-by Philippe Reynes <[email protected]>Reviewed-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190519/86239ff5/attachment.sig>
PATCH 3/3 dt: bcm63158: watchdog should use a 50Mhz clock
In reply to Philippe ReynesThe watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.
--- arch/arm/dts/bcm63158.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
arch/arm/dts/bcm63158.dtsi +8 -2
@@ -66,6 +66,12 @@ clock-frequency = <0xbebc200>; u-boot,dm-pre-reloc; }; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; }; ubus {
@@ -92,13 +98,13 @@ wdt1: watchdog at ff800480 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff800480 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt2: watchdog at ff8004c0 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff8004c0 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt-reboot {
Signature · 1 line
2.7.4
PATCH 3/3 dt: bcm63158: watchdog should use a 50Mhz clock
Quoted 6 lines · Philippe Reynes
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.Signed-off-by Philippe Reynes <[email protected]>
Just curious: Why is this the case? Is this also what's done in the Linux DT version?
Other than that:
Thanks,
Stefan
Quoted 28 lines
--- arch/arm/dts/bcm63158.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)arch/arm/dts/bcm63158.dtsi +7
-1@@ -66,6 +66,12 @@ clock-frequency = <0xbebc200>; u-boot,dm-pre-reloc; }; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; }; ubus {@@ -92,13 +98,13 @@ wdt1: watchdog at ff800480 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff800480 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>;
arch/arm/dts/bcm63158.dtsi line 110
Quoted 10 lines
arch/arm/dts/bcm63158.dtsi +1
-1}; wdt2: watchdog at ff8004c0 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff8004c0 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt-reboot {
Viele Grüße,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH 3/3 dt: bcm63158: watchdog should use a 50Mhz clock
Hi Stefan,
Quoted 10 lines · Philippe Reynes
Quoted 6 lines
The watchdog should use a clock at 50 Mhz, so instead of using the clock osc (200 Mhz), we define a reference clock at 50Mhz and use it for both watchdog.
Signed-off-by Philippe Reynes <[email protected]>Just curious: Why is this the case? Is this also what's done in the Linux DT version?
From my understanding, in the linux kernel, the driver doesn't compute the timeout for the watchdog counter register. Every second, the driver set the maximum value in the watchdog counter register and compute a logical tick. If this tick decrease below zero, the watchdog isn't restarted, so when the watchdog counter reach zero, the board is resetted.
In u-boot, the driver compute the expected timeout and set it in the watchdog register.
Quoted 3 lines
Other than that:
Reviewed-by Stefan Roese <[email protected]>
Thanks
Quoted 2 lines
Thanks,
Stefan
Regards,
Philippe
Quoted 47 lines
Quoted 29 lines
---
arch/arm/dts/bcm63158.dtsi| 10 ++++++++--1 file changed, 8 insertions(+), 2 deletions(-)arch/arm/dts/bcm63158.dtsi +7
-1@@ -66,6 +66,12 @@ clock-frequency = <0xbebc200>; u-boot,dm-pre-reloc; }; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; }; ubus {@@ -92,13 +98,13 @@ wdt1: watchdog at ff800480 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff800480 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>;arch/arm/dts/bcm63158.dtsi line 110
Quoted 10 lines
arch/arm/dts/bcm63158.dtsi +1
-1}; wdt2: watchdog at ff8004c0 { compatible = "brcm,bcm6345-wdt"; reg = <0x0 0xff8004c0 0x0 0x14>; - clocks = <&periph_osc>; + clocks = <&refclk50mhz>; }; wdt-reboot {Viele Grüße,
Stefan--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH 3/3 dt: bcm63158: watchdog should use a 50Mhz clock
Hi Philippe,
Quoted 13 lines · Philippe REYNES
Hi Stefan,
Quoted 10 lines · Philippe Reynes
Quoted 6 lines
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.Signed-off-by Philippe Reynes <[email protected]>Just curious: Why is this the case? Is this also what's done in the Linux DT version?
Quoted 8 lines
From my understanding, in the linux kernel, the driver doesn't compute
the timeout for the watchdog counter register. Every second, the driver set the maximum value in the watchdog counter register and compute a logical tick. If this tick decrease below zero, the watchdog isn't restarted, so when the watchdog counter reach zero, the board is resetted.In u-boot, the driver compute the expected timeout and set it in the watchdog register.
I see. But why "should the watchdog use a clock at 50MHz" instead of the default 200MHz (from your commit text)?
I'm checking as this change most likely results in a DT difference in the U-Boot vs the Linux version, which should be avoided.
Thanks,
Stefan
PATCH 3/3 dt: bcm63158: watchdog should use a 50Mhz clock
Hi Stefan,
Quoted 22 lines
Hi Philippe,
Quoted 19 lines · Philippe REYNES
Hi Stefan,
Quoted 10 lines · Philippe Reynes
Quoted 6 lines
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.Signed-off-by Philippe Reynes <[email protected]>Just curious: Why is this the case? Is this also what's done in the Linux DT version?
From my understanding, in the linux kernel, the driver doesn't compute the timeout for the watchdog counter register. Every second, the driver set the maximum value in the watchdog counter register and compute a logical tick. If this tick decrease below zero, the watchdog isn't restarted, so when the watchdog counter reach zero, the board is resetted.
Quoted 5 lines
Quoted 2 lines
In u-boot, the driver compute the expected timeout and set it in the watchdog register.
I see. But why "should the watchdog use a clock at 50MHz" instead of the default 200MHz (from your commit text)?
In the patch "fix bcm6345 watchdog on broadcom board", I've updated the watchdog driver for bcm6345 to compute the number of tick for the counter in the watchdog. For this computation, I need the frequency of the clock used by the watchdog. As this IP is used on many SoC (mips, arm), I've added a clock in the device tree so it's could be more generic.
Quoted 5 lines
I'm checking as this change most likely results in a DT difference in the U-Boot vs the Linux version, which should be avoided.
Thanks,
Stefan
Regards,
Philippe
PATCH 3/3 dt: bcm63158: watchdog should use a 50Mhz clock
In reply to Philippe ReynesQuoted 7 lines · Philippe Reynes
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.Signed-off-by Philippe Reynes <[email protected]>Reviewed-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190519/39435eb8/attachment.sig>