Skip to contentSkip to conversation

Extract build_mcfg Part 2

PATCH Superseded Wei Yang 3 participants 11 messages May 21, 2019 – May 22, 2019

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Wei Yang

author
#0 lore raw

v5 cover Extract build_mcfg Part 2

This patch set tries to generalize MCFG table build process. Several patches are already merged and these two are left for the following reasons:

* conflict with latest upstream
* ACPI_PCI dependency fix
* missed reserved[8] in MCFG

v4->v5:
* ACPI_PCI depends on both ACPI and PCI
* rebase on latest master, adjust arm Kconfig
* miss the reserved[8] of MCFG, add it back
* make sure bios-tables-test all OK

Wei Yang (2):
hw/acpi: Consolidate build_mcfg to pci.c
acpi: pci: use build_append_foo() API to construct MCFG

 default-configs/i386-softmmu.mak |  1 +
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/acpi/pci.c                    | 57 ++++++++++++++++++++++++++++++++
 hw/arm/Kconfig                   |  1 +
 hw/arm/virt-acpi-build.c         | 17 ----------
 hw/i386/acpi-build.c             | 18 +---------
 include/hw/acpi/acpi-defs.h      | 18 ----------
 include/hw/acpi/pci.h            |  1 +
 9 files changed, 66 insertions(+), 52 deletions(-)
 create mode 100644 hw/acpi/pci.c
Signature · 1 line
2.19.1
author
#1 lore raw

PATCH v5 1/2 hw/acpi: Consolidate build_mcfg to pci.c

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

---
v5:
* ACPI_PCI depends on both ACPI and PCI
* rebase on latest master, adjust arm Kconfig
v3:
* adjust changelog based on Igor's suggestion

---
 default-configs/i386-softmmu.mak |  1 +
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
 hw/arm/Kconfig                   |  1 +
 hw/arm/virt-acpi-build.c         | 17 ------------
 hw/i386/acpi-build.c             | 18 +------------
 include/hw/acpi/pci.h            |  1 +
 8 files changed, 55 insertions(+), 34 deletions(-)
 create mode 100644 hw/acpi/pci.c
default-configs/i386-softmmu.mak +1 -0
index ba3fb3ff50..cd5ea391e8 100644
@@ -25,3 +25,4 @@
 CONFIG_ISAPC=y
 CONFIG_I440FX=y
 CONFIG_Q35=y
+CONFIG_ACPI_PCI=y
hw/acpi/Kconfig +4 -0
index eca3beed75..7c59cf900b 100644
@@ -23,6 +23,10 @@ config ACPI_NVDIMM
     bool
     depends on ACPI
 
+config ACPI_PCI
+    bool
+    depends on ACPI && PCI
+
 config ACPI_VMGENID
     bool
     default y
hw/acpi/Makefile.objs +1 -0
index 2d46e3789a..661a9b8c2f 100644
@@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 common-obj-y += acpi_interface.o
 common-obj-y += bios-linker-loader.o
 common-obj-y += aml-build.o
+common-obj-$(CONFIG_ACPI_PCI) += pci.o
 common-obj-$(CONFIG_TPM) += tpm.o
 
 common-obj-$(CONFIG_IPMI) += ipmi.o
hw/acpi/pci.c new file +46 -0

46 lines not on this page · raw message

hw/arm/Kconfig +1 -0
index af8cffde9c..9aced9d54d 100644
@@ -19,6 +19,7 @@ config ARM_VIRT
     select PLATFORM_BUS
     select SMBIOS
     select VIRTIO_MMIO
+    select ACPI_PCI
 
 config CHEETAH
     bool
hw/arm/virt-acpi-build.c +0 -17
index e7c96d658e..4a64f9985c 100644
@@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
-static void
-build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /* GTDT */
 static void
 build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
hw/i386/acpi-build.c +1 -17
index 0d78d73894..85dc1640bc 100644
@@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                  table_data->len - srat_start, 1, NULL, NULL);
 }
 
-static void
-build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /*
  * VT-d spec 8.1 DMA Remapping Reporting Structure
  * (version Oct. 2014 or later)
@@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
     }
     if (acpi_get_mcfg(&mcfg)) {
         acpi_add_table(table_offsets, tables_blob);
-        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
+        build_mcfg(tables_blob, tables->linker, &mcfg);
     }
     if (x86_iommu_get_default()) {
         IommuType IOMMUType = x86_iommu_get_type();
include/hw/acpi/pci.h +1 -0
index 124af7d32a..8bbd32cf45 100644
@@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
     uint32_t size;
 } AcpiMcfgInfo;
 
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
 #endif
Signature · 1 line
2.19.1
#2 lore raw

Re: [Qemu-arm] [PATCH v5 1/2] hw/acpi: Consolidate build_mcfg to pci.c

Quoted 6 lines · Wei Yang

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Quoted 7 lines

---
v5:
* ACPI_PCI depends on both ACPI and PCI
* rebase on latest master, adjust arm Kconfig
v3:
* adjust changelog based on Igor's suggestion
---

same as 2/2 - do not use two --- separators pls.

Quoted 187 lines
 default-configs/i386-softmmu.mak |  1 +
 hw/acpi/Kconfig                  |  4 +++
 hw/acpi/Makefile.objs            |  1 +
 hw/acpi/pci.c                    | 46 ++++++++++++++++++++++++++++++++
 hw/arm/Kconfig                   |  1 +
 hw/arm/virt-acpi-build.c         | 17 ------------
 hw/i386/acpi-build.c             | 18 +------------
 include/hw/acpi/pci.h            |  1 +
 8 files changed, 55 insertions(+), 34 deletions(-)
 create mode 100644 hw/acpi/pci.c
default-configs/i386-softmmu.mak +1 -0
index ba3fb3ff50..cd5ea391e8 100644
@@ -25,3 +25,4 @@
 CONFIG_ISAPC=y
 CONFIG_I440FX=y
 CONFIG_Q35=y
+CONFIG_ACPI_PCI=y
hw/acpi/Kconfig +4 -0
index eca3beed75..7c59cf900b 100644
@@ -23,6 +23,10 @@ config ACPI_NVDIMM
     bool
     depends on ACPI
 
+config ACPI_PCI
+    bool
+    depends on ACPI && PCI
+
 config ACPI_VMGENID
     bool
     default y
hw/acpi/Makefile.objs +1 -0
index 2d46e3789a..661a9b8c2f 100644
@@ -11,6 +11,7 @@ common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 common-obj-y += acpi_interface.o
 common-obj-y += bios-linker-loader.o
 common-obj-y += aml-build.o
+common-obj-$(CONFIG_ACPI_PCI) += pci.o
 common-obj-$(CONFIG_TPM) += tpm.o
 
 common-obj-$(CONFIG_IPMI) += ipmi.o
hw/acpi/pci.c new file +46 -0
new file mode 100644
index 0000000000..fa0fa30bb9
@@ -0,0 +1,46 @@
+/*
+ * Support for generating PCI related ACPI tables and passing them to Guests
+ *
+ * Copyright (C) 2006 Fabrice Bellard
+ * Copyright (C) 2008-2010  Kevin O'Connor <[email protected]>
+ * Copyright (C) 2013-2019 Red Hat Inc
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * Author: Wei Yang <[email protected]>
+ * Author: Michael S. Tsirkin <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/pci.h"
+#include "hw/pci/pcie_host.h"
+
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
+{
+    AcpiTableMcfg *mcfg;
+    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
+
+    mcfg = acpi_data_push(table_data, len);
+    mcfg->allocation[0].address = cpu_to_le64(info->base);
+
+    /* Only a single allocation so no need to play with segments */
+    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
+    mcfg->allocation[0].start_bus_number = 0;
+    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
+
+    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+}
+
hw/arm/Kconfig +1 -0
index af8cffde9c..9aced9d54d 100644
@@ -19,6 +19,7 @@ config ARM_VIRT
     select PLATFORM_BUS
     select SMBIOS
     select VIRTIO_MMIO
+    select ACPI_PCI
 
 config CHEETAH
     bool
hw/arm/virt-acpi-build.c +0 -17
index e7c96d658e..4a64f9985c 100644
@@ -546,23 +546,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  "SRAT", table_data->len - srat_start, 3, NULL, NULL);
 }
 
-static void
-build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /* GTDT */
 static void
 build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
hw/i386/acpi-build.c +1 -17
index 0d78d73894..85dc1640bc 100644
@@ -2405,22 +2405,6 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                  table_data->len - srat_start, 1, NULL, NULL);
 }
 
-static void
-build_mcfg_q35(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
-{
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
-}
-
 /*
  * VT-d spec 8.1 DMA Remapping Reporting Structure
  * (version Oct. 2014 or later)
@@ -2690,7 +2674,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
     }
     if (acpi_get_mcfg(&mcfg)) {
         acpi_add_table(table_offsets, tables_blob);
-        build_mcfg_q35(tables_blob, tables->linker, &mcfg);
+        build_mcfg(tables_blob, tables->linker, &mcfg);
     }
     if (x86_iommu_get_default()) {
         IommuType IOMMUType = x86_iommu_get_type();
include/hw/acpi/pci.h +1 -0
index 124af7d32a..8bbd32cf45 100644
@@ -30,4 +30,5 @@ typedef struct AcpiMcfgInfo {
     uint32_t size;
 } AcpiMcfgInfo;
 
+void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info);
 #endif
Signature · 1 line
2.19.1
#3 lore raw

Re: [Qemu-arm] [Qemu-devel] [PATCH v5 1/2] hw/acpi: Consolidate build_mcfg to pci.c

Quoted 16 lines · On Mon, 20 May 2019 23:37:46 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 6 lines · Wei Yang

Now we have two identical build_mcfg functions.

Consolidate them in acpi/pci.c.

Quoted 7 lines

---
v5:
* ACPI_PCI depends on both ACPI and PCI
* rebase on latest master, adjust arm Kconfig
v3:
* adjust changelog based on Igor's suggestion
---

Quoted 1 line

same as 2/2 - do not use two --- separators pls.

I don't really get this requirement, it's common practice on list(s) and used to work just fine.

The 1st separator is added by hand when editing commit message to separate change log from main commit message so that 'git am' would drop change log. While the second separator is added automatically by git when patch is created.

author
#4 lore raw

PATCH v5 2/2 acpi: pci: use build_append_foo() API to construct MCFG

In reply to Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK

---
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +23 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1
#5 lore raw

Re: [Qemu-arm] [PATCH v5 2/2] acpi: pci: use build_append_foo() API to construct MCFG

Quoted 9 lines · Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

Quoted 5 lines

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK
---

Please do not add two --- separators. It breaks git am.

One --- should come after the commit log. Anything after that and until diff is ignored anyway.

Quoted 80 lines
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +23 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1
#6 lore raw

Re: [Qemu-arm] [PATCH v5 2/2] acpi: pci: use build_append_foo() API to construct MCFG

Quoted 10 lines · On Mon, 20 May 2019 23:37:22 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 9 lines · Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

Quoted 8 lines
Quoted 5 lines

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK
---

Please do not add two --- separators. It breaks git am.

that worked just fine for the last xx years and still works for me.

Quoted 3 lines

One --- should come after the commit log. Anything after that and until diff is ignored anyway.

That's fine if we wish to commit change log into history, but
Typically we don't want change log to be committed (as it's useless from history pov), hence we put it after separator to get it dropped on applying.

Quoted 81 lines
Quoted 81 lines
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +23 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1  
Reviewed-by Igor Mammedov
#7 lore raw

Re: [Qemu-arm] [PATCH v5 2/2] acpi: pci: use build_append_foo() API to construct MCFG

Quoted 20 lines · Igor Mammedov
Quoted 17 lines · On Mon, 20 May 2019 23:37:22 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 14 lines · Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK
---

Quoted 2 lines
Quoted 1 line

Please do not add two --- separators. It breaks git am.

that worked just fine for the last xx years and still works for me.

Because you don't use git am?
It's true I often am forced to edit your patches to apply them. Pls do not do this it makes no sense.

Quoted 6 lines
Quoted 3 lines

One --- should come after the commit log. Anything after that and until diff is ignored anyway.

That's fine if we wish to commit change log into history, but
Typically we don't want change log to be committed (as it's useless from history pov), hence we put it after separator to get it dropped on applying.

Then you should do

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK

 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +0 -0

Anything between --- and diff is ignored. Second --- is poointless and harmful.

Quoted 81 lines
Quoted 81 lines
Quoted 81 lines
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +23 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1  
#8 lore raw

Re: [Qemu-arm] [PATCH v5 2/2] acpi: pci: use build_append_foo() API to construct MCFG

Quoted 21 lines · On Tue, 21 May 2019 10:34:03 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 20 lines · Igor Mammedov
Quoted 17 lines · On Mon, 20 May 2019 23:37:22 -0400 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 14 lines · Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK
---

Quoted 6 lines
Quoted 2 lines
Quoted 1 line

Please do not add two --- separators. It breaks git am.

that worked just fine for the last xx years and still works for me.

Because you don't use git am?
It's true I often am forced to edit your patches to apply them. Pls do not do this it makes no sense.

I do not use it as much as you, but I do use git am to test patches from list and it works with double separator as expected (the second separator is ignored).

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines

One --- should come after the commit log. Anything after that and until diff is ignored anyway.

That's fine if we wish to commit change log into history, but
Typically we don't want change log to be committed (as it's useless from history pov), hence we put it after separator to get it dropped on applying.

Then you should do

the problem is that the second separator is added by git, so one would have to edit it out after format-patch (which is error prone in case of multi-patch series).

I don't know much about git though, so could you suggest how to handle situation to avoid the second --- (i.e. how do you do it)?

PS:
There is 'git notes' to add/track per patch annotations, but it a bit tedious to use notes compared to in-lining change log in commit message.

Quoted 108 lines

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK

 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +0 -0

Anything between --- and diff is ignored. Second --- is poointless and harmful.

Quoted 81 lines
Quoted 81 lines
Quoted 81 lines
  
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +23 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1    
#9 lore raw

Re: [Qemu-arm] [PATCH v5 2/2] acpi: pci: use build_append_foo() API to construct MCFG

In reply to Wei Yang
Quoted 38 lines · Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK

---
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +0 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);

hw/acpi/pci.c line 42

Quoted 10 lines
hw/acpi/pci.c +10 -0
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);

below is in fact
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure

maybe document this?

Quoted 46 lines
hw/acpi/pci.c +13 -0
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1
author
#10 lore raw

Re: [Qemu-arm] [PATCH v5 2/2] acpi: pci: use build_append_foo() API to construct MCFG

Quoted 53 lines · Michael S. Tsirkin
Quoted 38 lines · Wei Yang

build_append_foo() API doesn't need explicit endianness conversions which eliminates a source of errors and it makes build_mcfg() look like declarative definition of MCFG table in ACPI spec, which makes it easy to review.

---
v5:
* miss the reserved[8] of MCFG in last version, add it back
* drop SOBs and make sure bios-tables-test all OK

---
 hw/acpi/pci.c               | 35 +++++++++++++++++++++++------------
 include/hw/acpi/acpi-defs.h | 18 ------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
hw/acpi/pci.c +0 -12
index fa0fa30bb9..49df7b7d54 100644
@@ -30,17 +30,28 @@
 
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info)
 {
-    AcpiTableMcfg *mcfg;
-    int len = sizeof(*mcfg) + sizeof(mcfg->allocation[0]);
-
-    mcfg = acpi_data_push(table_data, len);
-    mcfg->allocation[0].address = cpu_to_le64(info->base);
-
-    /* Only a single allocation so no need to play with segments */
-    mcfg->allocation[0].pci_segment = cpu_to_le16(0);
-    mcfg->allocation[0].start_bus_number = 0;
-    mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->size - 1);
-
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1, NULL, NULL);

hw/acpi/pci.c line 42

Quoted 10 lines
hw/acpi/pci.c +10 -0
+    int mcfg_start = table_data->len;
+
+    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+    /*
+     * PCI Firmware Specification, Revision 3.0
+     * 4.1.2 MCFG Table Description.
+     */
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8);

below is in fact
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure

Quoted 2 lines

maybe document this?

Sure. Let me add this.

Quoted 46 lines
Quoted 46 lines
hw/acpi/pci.c +13 -0
+    /* Base address, processor-relative */
+    build_append_int_noprefix(table_data, info->base, 8);
+    /* PCI segment group number */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Starting PCI Bus number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Final PCI Bus number */
+    build_append_int_noprefix(table_data, PCIE_MMCFG_BUS(info->size - 1), 1);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
+
+    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
+                 "MCFG", table_data->len - mcfg_start, 1, NULL, NULL);
 }
 
include/hw/acpi/acpi-defs.h +0 -18
index f9aa4bd398..57a3f58b0c 100644
@@ -449,24 +449,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/* PCI fw r3.0 MCFG table. */
-/* Subtable */
-struct AcpiMcfgAllocation {
-    uint64_t address;                /* Base address, processor-relative */
-    uint16_t pci_segment;            /* PCI segment group number */
-    uint8_t start_bus_number;       /* Starting PCI Bus number */
-    uint8_t end_bus_number;         /* Final PCI Bus number */
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiMcfgAllocation AcpiMcfgAllocation;
-
-struct AcpiTableMcfg {
-    ACPI_TABLE_HEADER_DEF;
-    uint8_t reserved[8];
-    AcpiMcfgAllocation allocation[0];
-} QEMU_PACKED;
-typedef struct AcpiTableMcfg AcpiTableMcfg;
-
 /*
  * TCPA Description Table
  *
Signature · 1 line
2.19.1
Signature · 2 lines
Wei Yang
Help you, Help me