regulator: arizona: Update device tree binding to support Madera CODECs
Subsystems (3)
PATCH 1/3 regulator: arizona: Update device tree binding to support Madera CODECs
The Arizona regulator drivers are now also used by the Cirrus Logic Madera audio CODECs, update the binding document to link to the primary binding document for these as well as the existing Arizona document.
--- Documentation/devicetree/bindings/regulator/arizona-regulator.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/regulator/arizona-regulator.txt +2 -1
@@ -5,7 +5,8 @@ of analogue I/O. This document lists regulator specific bindings, see the primary binding document: - ../mfd/arizona.txt + For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt + For Cirrus Logic Madera codecs: ../mfd/madera.txt Optional properties: - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
Signature · 1 line
2.11.0
PATCH 2/3 regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs
From: Richard Fitzgerald <[email protected]>
This adds a new driver identity "madera-ldo1" and probe function so that this driver can be used to control the LDO1 regulator on some Cirrus Logic Madera codecs.
--- drivers/regulator/Kconfig | 8 ++-- drivers/regulator/arizona-ldo1.c | 83 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 86 insertions(+), 5 deletions(-)
drivers/regulator/Kconfig +4 -4
@@ -135,12 +135,12 @@ config REGULATOR_AB8500 signal AB8500 PMIC config REGULATOR_ARIZONA_LDO1 - tristate "Wolfson Arizona class devices LDO1" - depends on MFD_ARIZONA + tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" + depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help - Support for the LDO1 regulators found on Wolfson Arizona class - devices. + Support for the LDO1 regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs. config REGULATOR_ARIZONA_MICSUPP tristate "Wolfson Arizona class devices MICSUPP"
drivers/regulator/arizona-ldo1.c +82 -1
110 lines not on this page · raw message
Signature · 1 line
2.11.0
Mark Brown
maintainerApplied "regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs" to the regulator tree
The patch
regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
1f5f11e7370c6a55da1a37351b0cfb5f86f0cb6dMon Sep 17 00:00:00 2001
From: Richard Fitzgerald <[email protected]>
Date: Tue, 21 May 2019 11:04:38 +0100
Subject: [PATCH] regulator: arizona-ldo1: Add support for Cirrus Logic Madera
codecs
This adds a new driver identity "madera-ldo1" and probe function so that this driver can be used to control the LDO1 regulator on some Cirrus Logic Madera codecs.
--- drivers/regulator/Kconfig | 8 +-- drivers/regulator/arizona-ldo1.c | 83 +++++++++++++++++++++++++++++++- 2 files changed, 86 insertions(+), 5 deletions(-)
drivers/regulator/Kconfig +4 -4
@@ -135,12 +135,12 @@ config REGULATOR_AB8500 signal AB8500 PMIC config REGULATOR_ARIZONA_LDO1 - tristate "Wolfson Arizona class devices LDO1" - depends on MFD_ARIZONA + tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" + depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help - Support for the LDO1 regulators found on Wolfson Arizona class - devices. + Support for the LDO1 regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs. config REGULATOR_ARIZONA_MICSUPP tristate "Wolfson Arizona class devices MICSUPP"
drivers/regulator/arizona-ldo1.c +82 -1
110 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 3/3 regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs
In reply to Charles KeepaxFrom: Richard Fitzgerald <[email protected]>
This adds a new driver identity "madera-micsupp" and probe function so that this driver can be used to control the micsupp regulator on Cirrus Logic Madera codecs.
--- drivers/regulator/Kconfig | 7 ++-- drivers/regulator/arizona-micsupp.c | 71 ++++++++++++++++++++++++++++++++++++- 2 files changed, 74 insertions(+), 4 deletions(-)
drivers/regulator/Kconfig +4 -3
@@ -143,11 +143,12 @@ config REGULATOR_ARIZONA_LDO1 and Wolfson Microelectronic Arizona codecs. config REGULATOR_ARIZONA_MICSUPP - tristate "Wolfson Arizona class devices MICSUPP" - depends on MFD_ARIZONA + tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" + depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help - Support for the MICSUPP regulators found on Wolfson Arizona class + Support for the MICSUPP regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs devices. config REGULATOR_AS3711
drivers/regulator/arizona-micsupp.c +70 -1
98 lines not on this page · raw message
Signature · 1 line
2.11.0
Mark Brown
maintainerApplied "regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs" to the regulator tree
The patch
regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
7bd7916dc8ab5b056f1b53e19021e476120481c0Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <[email protected]>
Date: Tue, 21 May 2019 11:04:39 +0100
Subject: [PATCH] regulator: arizona-micsupp: Add support for Cirrus Logic
Madera codecs
This adds a new driver identity "madera-micsupp" and probe function so that this driver can be used to control the micsupp regulator on Cirrus Logic Madera codecs.
--- drivers/regulator/Kconfig | 7 +-- drivers/regulator/arizona-micsupp.c | 71 ++++++++++++++++++++++++++++- 2 files changed, 74 insertions(+), 4 deletions(-)
drivers/regulator/Kconfig +4 -3
@@ -143,11 +143,12 @@ config REGULATOR_ARIZONA_LDO1 and Wolfson Microelectronic Arizona codecs. config REGULATOR_ARIZONA_MICSUPP - tristate "Wolfson Arizona class devices MICSUPP" - depends on MFD_ARIZONA + tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" + depends on MFD_ARIZONA || MFD_MADERA depends on SND_SOC help - Support for the MICSUPP regulators found on Wolfson Arizona class + Support for the MICSUPP regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs devices. config REGULATOR_AS3711
drivers/regulator/arizona-micsupp.c +70 -1
98 lines not on this page · raw message
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: arizona: Update device tree binding to support Madera CODECs" to the regulator tree
In reply to Charles KeepaxThe patch
regulator: arizona: Update device tree binding to support Madera CODECs
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
46f4050a6587ea3e59e6f47f06513c00689b9d40Mon Sep 17 00:00:00 2001
From: Charles Keepax <[email protected]>
Date: Tue, 21 May 2019 11:04:37 +0100
Subject: [PATCH] regulator: arizona: Update device tree binding to support
Madera CODECs
The Arizona regulator drivers are now also used by the Cirrus Logic Madera audio CODECs, update the binding document to link to the primary binding document for these as well as the existing Arizona document.
--- .../devicetree/bindings/regulator/arizona-regulator.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/regulator/arizona-regulator.txt +2 -1
@@ -5,7 +5,8 @@ of analogue I/O. This document lists regulator specific bindings, see the primary binding document: - ../mfd/arizona.txt + For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt + For Cirrus Logic Madera codecs: ../mfd/madera.txt Optional properties: - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
Signature · 1 line
2.20.1