drm/i915: Make sandybridge_pcode_read() deal with the second data register
Subsystems (2)
PATCH v5 1/2 drm/i915: Make sandybridge_pcode_read() deal with the second data register
From: Ville Syrjälä <[email protected]>
The pcode mailbox has two data registers. So far we've only ever used the one, but that's about to change. Expose the second data register to the callers of sandybridge_pcode_read().
--- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- drivers/gpu/drm/i915/intel_pm.c | 12 +++++++----- drivers/gpu/drm/i915/intel_sideband.c | 15 +++++++++------ drivers/gpu/drm/i915/intel_sideband.h | 3 ++- 4 files changed, 20 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
@@ -1500,7 +1500,7 @@ static int gen6_drpc_info(struct seq_file *m)if (INTEL_GEN (dev_priv) <=7 )sandybridge_pcode_read (dev_priv,GEN6_PCODE_READ_RC6VIDS , - &rc6vids); + &rc6vids,NULL );seq_printf (m,"RC1e Enabled: %s\n" ,yesno (rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
@@ -1783,7 +1783,7 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused) ia_freq = gpu_freq;sandybridge_pcode_read (dev_priv,GEN6_PCODE_READ_MIN_FREQ_TABLE , - &ia_freq); + &ia_freq,NULL ); seq_printf(m, "%d\t\t%d\t\t\t\t%d\n", intel_gpu_freq(dev_priv, (gpu_freq * (IS_GEN9_BC(dev_priv) ||
drivers/gpu/drm/i915/intel_pm.c +7 -5
@@ -2822,7 +2822,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv, val =0 ;/* data0 to be programmed to 0 for first set */ ret =sandybridge_pcode_read (dev_priv,GEN9_PCODE_READ_MEM_LATENCY , - &val); + &val,NULL );if (ret) {DRM_ERROR ("SKL Mailbox read error = %d\n" , ret);
@@ -2841,7 +2841,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv, val =1 ;/* data0 to be programmed to 1 for second set */ ret =sandybridge_pcode_read (dev_priv,GEN9_PCODE_READ_MEM_LATENCY , - &val); + &val,NULL );if (ret) {DRM_ERROR ("SKL Mailbox read error = %d\n" , ret);return ;
@@ -7072,7 +7072,7 @@ static void gen6_init_rps_frequencies(struct drm_i915_private *dev_priv)if (sandybridge_pcode_read (dev_priv,HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL , - &ddcc_status) ==0 ) + &ddcc_status,NULL ) ==0 ) rps->efficient_freq = clamp_t(u8, ((ddcc_status >> 8) & 0xff),
@@ -7419,7 +7419,8 @@ static void gen6_enable_rc6(struct drm_i915_private *dev_priv) GEN6_RC_CTL_HW_ENABLE); rc6vids =0 ; - ret =sandybridge_pcode_read (dev_priv,GEN6_PCODE_READ_RC6VIDS , &rc6vids); + ret =sandybridge_pcode_read (dev_priv,GEN6_PCODE_READ_RC6VIDS , + &rc6vids,NULL );if (IS_GEN (dev_priv,6 ) && ret) {DRM_DEBUG_DRIVER ("Couldn't check for BIOS workaround\n" ); }else if (IS_GEN (dev_priv,6 ) && (GEN6_DECODE_RC6_VID (rc6vids &0xff ) <450 )) {
@@ -8566,7 +8567,8 @@ void intel_init_gt_powersave(struct drm_i915_private *dev_priv) IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) {u32 params =0 ; -sandybridge_pcode_read (dev_priv,GEN6_READ_OC_PARAMS , ¶ms); +sandybridge_pcode_read (dev_priv,GEN6_READ_OC_PARAMS , + ¶ms,NULL );if (params &BIT (31 )) {/* OC supported */ DRM_DEBUG_DRIVER("Overclocking supported, max: %dMHz, overclock: %dMHz\n", (rps->max_freq & 0xff) * 50,
drivers/gpu/drm/i915/intel_sideband.c +9 -6
@@ -374,7 +374,7 @@ static inline int gen7_check_mailbox_status(u32 mbox) }static int __sandybridge_pcode_rw (struct drm_i915_private *i915, -u32 mbox,u32 *val, +u32 mbox,u32 *val,u32 *val1,int fast_timeout_us,int slow_timeout_ms,bool is_read)
@@ -393,7 +393,7 @@ static int __sandybridge_pcode_rw(struct drm_i915_private *i915,return -EAGAIN ;intel_uncore_write_fw (uncore,GEN6_PCODE_DATA , *val); -intel_uncore_write_fw (uncore,GEN6_PCODE_DATA1 ,0 ); +intel_uncore_write_fw (uncore,GEN6_PCODE_DATA1 , val1 ? *val1 :0 );intel_uncore_write_fw (uncore,GEN6_PCODE_MAILBOX ,GEN6_PCODE_READY | mbox);
@@ -407,6 +407,8 @@ static int __sandybridge_pcode_rw(struct drm_i915_private *i915,if (is_read) *val =intel_uncore_read_fw (uncore,GEN6_PCODE_DATA ); +if (is_read && val1) + *val1 =intel_uncore_read_fw (uncore,GEN6_PCODE_DATA1 );if (INTEL_GEN (i915) >6 )return gen7_check_mailbox_status (mbox);
@@ -414,12 +416,13 @@ static int __sandybridge_pcode_rw(struct drm_i915_private *i915,return gen6_check_mailbox_status (mbox); } -int sandybridge_pcode_read (struct drm_i915_private *i915,u32 mbox,u32 *val) +int sandybridge_pcode_read (struct drm_i915_private *i915,u32 mbox, +u32 *val,u32 *val1) {int err;mutex_lock (&i915->sb_lock); - err =__sandybridge_pcode_rw (i915, mbox, val, + err =__sandybridge_pcode_rw (i915, mbox, val, val1,500 ,0 , true);mutex_unlock (&i915->sb_lock);
@@ -440,7 +443,7 @@ int sandybridge_pcode_write_timeout(struct drm_i915_private *i915,int err;mutex_lock (&i915->sb_lock); - err =__sandybridge_pcode_rw (i915, mbox, &val, + err =__sandybridge_pcode_rw (i915, mbox, &val,NULL , fast_timeout_us, slow_timeout_ms, false);mutex_unlock (&i915->sb_lock);
@@ -457,7 +460,7 @@ static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox, u32 request, u32 reply_mask, u32 reply, u32 *status) { - *status =__sandybridge_pcode_rw (i915, mbox, &request, + *status =__sandybridge_pcode_rw (i915, mbox, &request,NULL ,500 ,0 , true);
drivers/gpu/drm/i915/intel_sideband.h +2 -1
@@ -127,7 +127,8 @@ u32 intel_sbi_read(struct drm_i915_private *i915, u16 reg,void intel_sbi_write (struct drm_i915_private *i915,u16 reg,u32 value,enum intel_sbi_destination destination); -int sandybridge_pcode_read (struct drm_i915_private *i915,u32 mbox,u32 *val); +int sandybridge_pcode_read (struct drm_i915_private *i915,u32 mbox, +u32 *val,u32 *val1);int sandybridge_pcode_write_timeout (struct drm_i915_private *i915,u32 mbox,u32 val,int fast_timeout_us,int slow_timeout_ms);
Signature · 6 lines
2.21.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 2/2 drm/i915: Make sure we have enough memory bandwidth on ICL
From: Ville Syrjälä <[email protected]>
ICL has so many planes that it can easily exceed the maximum effective memory bandwidth of the system. We must therefore check that we don't exceed that limit.
The algorithm is very magic number heavy and lacks sufficient explanation for now. We also have no sane way to query the memory clock and timings, so we must rely on a combination of raw readout from the memory controller and hardcoded assumptions. The memory controller values obviously change as the system jumps between the different SAGV points, so we try to stabilize it first by disabling SAGV for the duration of the readout.
The utilized bandwidth is tracked via a device wide atomic private object. That is actually not robust because we can't afford to enforce strict global ordering between the pipes. Thus I think I'll need to change this to simply chop up the available bandwidth between all the active pipes. Each pipe can then do whatever it wants as long as it doesn't exceed its budget. That scheme will also require that we assume that any number of planes could be active at any time.
TODO: make it robust and deal with all the open questions
v2: Sleep longer after disabling SAGV
v3: Poll for the dclk to get raised (seen it take 250ms!)
If the system has 2133MT/s memory then we pointlessly wait one full second :(
v4: Use the new pcode interface to get the qgv points rather
that using hardcoded numbers
v5: Move the pcode stuff into intel_bw.c (Matt)
s/intel_sagv_info/intel_qgv_info/
Do the NV12/P010 as per spec for now (Matt) s/IS_ICELAKE/IS_GEN11/
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_drv.c | 2 + drivers/gpu/drm/i915/i915_drv.h | 8 + drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_atomic_plane.c | 27 ++ drivers/gpu/drm/i915/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/intel_bw.c | 415 ++++++++++++++++++++++ drivers/gpu/drm/i915/intel_bw.h | 47 +++ drivers/gpu/drm/i915/intel_display.c | 40 ++- drivers/gpu/drm/i915/intel_drv.h | 2 + 10 files changed, 546 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/i915/intel_bw.c create mode 100644 drivers/gpu/drm/i915/intel_bw.h
drivers/gpu/drm/i915/Makefile +1 -0
@@ -138,6 +138,7 @@ i915-y += intel_audio.o \ intel_atomic.o \ intel_atomic_plane.o \ intel_bios.o \ + intel_bw.o \ intel_cdclk.o \ intel_color.o \ intel_combo_phy.o \
drivers/gpu/drm/i915/i915_drv.c +2 -0
@@ -60,6 +60,7 @@#include "i915_vgpu.h" #include "intel_acpi.h" #include "intel_audio.h" +#include "intel_bw.h" #include "intel_cdclk.h" #include "intel_csr.h" #include "intel_dp.h"
@@ -1656,6 +1657,7 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)*/ intel_get_dram_info (dev_priv); +intel_bw_init_hw (dev_priv);return 0 ;
drivers/gpu/drm/i915/i915_drv.h +8 -0
@@ -54,6 +54,7 @@#include <drm/drm_cache.h> #include <drm/drm_util.h> #include <drm/drm_dsc.h> +#include <drm/drm_atomic.h> #include <drm/drm_connector.h> #include <drm/i915_mei_hdcp_interface.h>
@@ -1841,6 +1842,13 @@ struct drm_i915_private { } type; } dram_info; +struct intel_bw_info { +int num_planes; +int deratedbw[3 ]; + } max_bw[6 ]; + +struct drm_private_obj bw_obj; +struct i915_runtime_pm runtime_pm;struct {
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -8774,6 +8774,9 @@ enum {#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8#define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9#define GEN6_READ_OC_PARAMS 0xc +#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd +#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8) +#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO (point) (((point) << 16) | (0x1 << 8))#define GEN6_PCODE_READ_D_COMP 0x10#define GEN6_PCODE_WRITE_D_COMP 0x11#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
drivers/gpu/drm/i915/intel_atomic_plane.c +27 -0
@@ -114,6 +114,29 @@ intel_plane_destroy_state(struct drm_plane *plane,drm_atomic_helper_plane_destroy_state (plane, state); } +unsigned int intel_plane_data_rate (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) +{ +const struct drm_framebuffer *fb = plane_state->base.fb; +unsigned int cpp; + +if (!plane_state->base.visible) +return 0 ; + + cpp = fb->format->cpp[0 ]; + +/* +* Based on HSD#:1408715493 +* NV12 cpp == 4, P010 cpp == 8 +* +* FIXME what is the logic behind this? +*/ +if (fb->format->is_yuv && fb->format->num_planes >1 ) + cpp *=4 ; + +return cpp * crtc_state->pixel_rate; +} + int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_state, struct intel_crtc_state *new_crtc_state, const struct intel_plane_state *old_plane_state,
@@ -125,6 +148,7 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ new_crtc_state->active_planes &= ~BIT (plane->id); new_crtc_state->nv12_planes &= ~BIT (plane->id); new_crtc_state->c8_planes &= ~BIT (plane->id); + new_crtc_state->data_rate[plane->id] =0 ; new_plane_state->base.visible = false;if (!new_plane_state->base.crtc && !old_plane_state->base.crtc)
@@ -149,6 +173,9 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_if (new_plane_state->base.visible || old_plane_state->base.visible) new_crtc_state->update_planes |=BIT (plane->id); + new_crtc_state->data_rate[plane->id] = +intel_plane_data_rate (new_crtc_state, new_plane_state); + return intel_plane_atomic_calc_changes(old_crtc_state, &new_crtc_state->base, old_plane_state,
drivers/gpu/drm/i915/intel_atomic_plane.h +2 -0
@@ -15,6 +15,8 @@ struct intel_plane_state;extern const struct drm_plane_helper_funcs intel_plane_helper_funcs; +unsigned int intel_plane_data_rate (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state);void intel_update_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state);
drivers/gpu/drm/i915/intel_bw.c new file +415 -0
415 lines not on this page · raw message
drivers/gpu/drm/i915/intel_bw.h new file +47 -0
47 lines not on this page · raw message
drivers/gpu/drm/i915/intel_display.c +39 -1
@@ -50,6 +50,7 @@#include "intel_acpi.h" #include "intel_atomic.h" #include "intel_atomic_plane.h" +#include "intel_bw.h" #include "intel_color.h" #include "intel_cdclk.h" #include "intel_crt.h"
@@ -3155,6 +3156,7 @@ static void intel_plane_disable_noatomic(struct intel_crtc *crtc,intel_set_plane_visible (crtc_state, plane_state, false);fixup_active_planes (crtc_state); + crtc_state->data_rate[plane->id] =0 ;if (plane->id ==PLANE_PRIMARY )intel_pre_disable_primary_noatomic (&crtc->base);
@@ -6879,6 +6881,8 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,struct intel_encoder *encoder;struct intel_crtc *intel_crtc =to_intel_crtc (crtc);struct drm_i915_private *dev_priv =to_i915 (crtc->dev); +struct intel_bw_state *bw_state = +to_intel_bw_state (dev_priv->bw_obj.state);enum intel_display_power_domain domain;struct intel_plane *plane;u64 domains;
@@ -6941,6 +6945,9 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc, dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe); dev_priv->min_cdclk[intel_crtc->pipe] =0 ; dev_priv->min_voltage_level[intel_crtc->pipe] =0 ; + + bw_state->data_rate[intel_crtc->pipe] =0 ; + bw_state->num_active_planes[intel_crtc->pipe] =0 ; }/*
@@ -11280,6 +11287,7 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_statif (!is_crtc_enabled) { plane_state->visible = visible = false;to_intel_crtc_state (crtc_state)->active_planes &= ~BIT (plane->id); +to_intel_crtc_state (crtc_state)->data_rate[plane->id] =0 ; }if (!was_visible && !visible)
@@ -13406,7 +13414,15 @@ static int intel_atomic_check(struct drm_device *dev,return ret;intel_fbc_choose_crtc (dev_priv, intel_state); -return calc_watermark_data (intel_state); + ret =calc_watermark_data (intel_state); +if (ret) +return ret; + + ret =intel_bw_atomic_check (intel_state); +if (ret) +return ret; + +return 0 ; } static int intel_atomic_prepare_commit(struct drm_device *dev,
@@ -15788,6 +15804,10 @@ int intel_modeset_init(struct drm_device *dev)drm_mode_config_init (dev); + ret =intel_bw_init (dev_priv); +if (ret) +return ret; + dev->mode_config.min_width =0 ; dev->mode_config.min_height =0 ;
@@ -16416,8 +16436,11 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)drm_connector_list_iter_end (&conn_iter);for_each_intel_crtc (dev, crtc) { +struct intel_bw_state *bw_state = +to_intel_bw_state (dev_priv->bw_obj.state);struct intel_crtc_state *crtc_state =to_intel_crtc_state (crtc->base.state); +struct intel_plane *plane;int min_cdclk =0 ;memset (&crtc->base.mode,0 ,sizeof (crtc->base.mode));
@@ -16456,6 +16479,21 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) dev_priv->min_voltage_level[crtc->pipe] = crtc_state->min_voltage_level; +for_each_intel_plane_on_crtc (&dev_priv->drm, crtc, plane) { +const struct intel_plane_state *plane_state = +to_intel_plane_state (plane->base.state); + +/* +* FIXME don't have the fb yet, so can't +* use intel_plane_data_rate() :( +*/ +if (plane_state->base.visible) + crtc_state->data_rate[plane->id] = +4 * crtc_state->pixel_rate; + } + +intel_bw_crtc_update (bw_state, crtc_state); +intel_pipe_config_sanity_check (dev_priv, crtc_state); } }
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -885,6 +885,8 @@ struct intel_crtc_state {struct intel_crtc_wm_state wm; +u32 data_rate[I915_MAX_PLANES ]; +/* Gamma mode programmed on the pipe */ u32 gamma_mode;
Signature · 6 lines
2.21.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v6 2/2 drm/i915: Make sure we have enough memory bandwidth on ICL
From: Ville Syrjälä <[email protected]>
ICL has so many planes that it can easily exceed the maximum effective memory bandwidth of the system. We must therefore check that we don't exceed that limit.
The algorithm is very magic number heavy and lacks sufficient explanation for now. We also have no sane way to query the memory clock and timings, so we must rely on a combination of raw readout from the memory controller and hardcoded assumptions. The memory controller values obviously change as the system jumps between the different SAGV points, so we try to stabilize it first by disabling SAGV for the duration of the readout.
The utilized bandwidth is tracked via a device wide atomic private object. That is actually not robust because we can't afford to enforce strict global ordering between the pipes. Thus I think I'll need to change this to simply chop up the available bandwidth between all the active pipes. Each pipe can then do whatever it wants as long as it doesn't exceed its budget. That scheme will also require that we assume that any number of planes could be active at any time.
TODO: make it robust and deal with all the open questions
v2: Sleep longer after disabling SAGV
v3: Poll for the dclk to get raised (seen it take 250ms!)
If the system has 2133MT/s memory then we pointlessly wait one full second :(
v4: Use the new pcode interface to get the qgv points rather
that using hardcoded numbers
v5: Move the pcode stuff into intel_bw.c (Matt)
s/intel_sagv_info/intel_qgv_info/
Do the NV12/P010 as per spec for now (Matt) s/IS_ICELAKE/IS_GEN11/
v6: Ignore bandwidth limits if the pcode query fails
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_drv.c | 2 + drivers/gpu/drm/i915/i915_drv.h | 8 + drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_atomic_plane.c | 27 ++ drivers/gpu/drm/i915/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/intel_bw.c | 421 ++++++++++++++++++++++ drivers/gpu/drm/i915/intel_bw.h | 47 +++ drivers/gpu/drm/i915/intel_display.c | 40 +- drivers/gpu/drm/i915/intel_drv.h | 2 + 10 files changed, 552 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/i915/intel_bw.c create mode 100644 drivers/gpu/drm/i915/intel_bw.h
drivers/gpu/drm/i915/Makefile +1 -0
@@ -138,6 +138,7 @@ i915-y += intel_audio.o \ intel_atomic.o \ intel_atomic_plane.o \ intel_bios.o \ + intel_bw.o \ intel_cdclk.o \ intel_color.o \ intel_combo_phy.o \
drivers/gpu/drm/i915/i915_drv.c +2 -0
@@ -60,6 +60,7 @@#include "i915_vgpu.h" #include "intel_acpi.h" #include "intel_audio.h" +#include "intel_bw.h" #include "intel_cdclk.h" #include "intel_csr.h" #include "intel_dp.h"
@@ -1657,6 +1658,7 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)*/ intel_get_dram_info (dev_priv); +intel_bw_init_hw (dev_priv);return 0 ;
drivers/gpu/drm/i915/i915_drv.h +8 -0
@@ -54,6 +54,7 @@#include <drm/drm_cache.h> #include <drm/drm_util.h> #include <drm/drm_dsc.h> +#include <drm/drm_atomic.h> #include <drm/drm_connector.h> #include <drm/i915_mei_hdcp_interface.h>
@@ -1841,6 +1842,13 @@ struct drm_i915_private { } type; } dram_info; +struct intel_bw_info { +int num_planes; +int deratedbw[3 ]; + } max_bw[6 ]; + +struct drm_private_obj bw_obj; +struct i915_runtime_pm runtime_pm;struct {
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -8777,6 +8777,9 @@ enum {#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8#define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9#define GEN6_READ_OC_PARAMS 0xc +#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd +#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8) +#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO (point) (((point) << 16) | (0x1 << 8))#define GEN6_PCODE_READ_D_COMP 0x10#define GEN6_PCODE_WRITE_D_COMP 0x11#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
drivers/gpu/drm/i915/intel_atomic_plane.c +27 -0
@@ -114,6 +114,29 @@ intel_plane_destroy_state(struct drm_plane *plane,drm_atomic_helper_plane_destroy_state (plane, state); } +unsigned int intel_plane_data_rate (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state) +{ +const struct drm_framebuffer *fb = plane_state->base.fb; +unsigned int cpp; + +if (!plane_state->base.visible) +return 0 ; + + cpp = fb->format->cpp[0 ]; + +/* +* Based on HSD#:1408715493 +* NV12 cpp == 4, P010 cpp == 8 +* +* FIXME what is the logic behind this? +*/ +if (fb->format->is_yuv && fb->format->num_planes >1 ) + cpp *=4 ; + +return cpp * crtc_state->pixel_rate; +} + int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_state, struct intel_crtc_state *new_crtc_state, const struct intel_plane_state *old_plane_state,
@@ -125,6 +148,7 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ new_crtc_state->active_planes &= ~BIT (plane->id); new_crtc_state->nv12_planes &= ~BIT (plane->id); new_crtc_state->c8_planes &= ~BIT (plane->id); + new_crtc_state->data_rate[plane->id] =0 ; new_plane_state->base.visible = false;if (!new_plane_state->base.crtc && !old_plane_state->base.crtc)
@@ -149,6 +173,9 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_if (new_plane_state->base.visible || old_plane_state->base.visible) new_crtc_state->update_planes |=BIT (plane->id); + new_crtc_state->data_rate[plane->id] = +intel_plane_data_rate (new_crtc_state, new_plane_state); + return intel_plane_atomic_calc_changes(old_crtc_state, &new_crtc_state->base, old_plane_state,
drivers/gpu/drm/i915/intel_atomic_plane.h +2 -0
@@ -15,6 +15,8 @@ struct intel_plane_state;extern const struct drm_plane_helper_funcs intel_plane_helper_funcs; +unsigned int intel_plane_data_rate (const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *plane_state);void intel_update_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state);
drivers/gpu/drm/i915/intel_bw.c new file +421 -0
421 lines not on this page · raw message
drivers/gpu/drm/i915/intel_bw.h new file +47 -0
47 lines not on this page · raw message
drivers/gpu/drm/i915/intel_display.c +39 -1
@@ -50,6 +50,7 @@#include "intel_acpi.h" #include "intel_atomic.h" #include "intel_atomic_plane.h" +#include "intel_bw.h" #include "intel_color.h" #include "intel_cdclk.h" #include "intel_crt.h"
@@ -3155,6 +3156,7 @@ static void intel_plane_disable_noatomic(struct intel_crtc *crtc,intel_set_plane_visible (crtc_state, plane_state, false);fixup_active_planes (crtc_state); + crtc_state->data_rate[plane->id] =0 ;if (plane->id ==PLANE_PRIMARY )intel_pre_disable_primary_noatomic (&crtc->base);
@@ -6879,6 +6881,8 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,struct intel_encoder *encoder;struct intel_crtc *intel_crtc =to_intel_crtc (crtc);struct drm_i915_private *dev_priv =to_i915 (crtc->dev); +struct intel_bw_state *bw_state = +to_intel_bw_state (dev_priv->bw_obj.state);enum intel_display_power_domain domain;struct intel_plane *plane;u64 domains;
@@ -6941,6 +6945,9 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc, dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe); dev_priv->min_cdclk[intel_crtc->pipe] =0 ; dev_priv->min_voltage_level[intel_crtc->pipe] =0 ; + + bw_state->data_rate[intel_crtc->pipe] =0 ; + bw_state->num_active_planes[intel_crtc->pipe] =0 ; }/*
@@ -11280,6 +11287,7 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_statif (!is_crtc_enabled) { plane_state->visible = visible = false;to_intel_crtc_state (crtc_state)->active_planes &= ~BIT (plane->id); +to_intel_crtc_state (crtc_state)->data_rate[plane->id] =0 ; }if (!was_visible && !visible)
@@ -13406,7 +13414,15 @@ static int intel_atomic_check(struct drm_device *dev,return ret;intel_fbc_choose_crtc (dev_priv, intel_state); -return calc_watermark_data (intel_state); + ret =calc_watermark_data (intel_state); +if (ret) +return ret; + + ret =intel_bw_atomic_check (intel_state); +if (ret) +return ret; + +return 0 ; } static int intel_atomic_prepare_commit(struct drm_device *dev,
@@ -15788,6 +15804,10 @@ int intel_modeset_init(struct drm_device *dev)drm_mode_config_init (dev); + ret =intel_bw_init (dev_priv); +if (ret) +return ret; + dev->mode_config.min_width =0 ; dev->mode_config.min_height =0 ;
@@ -16416,8 +16436,11 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)drm_connector_list_iter_end (&conn_iter);for_each_intel_crtc (dev, crtc) { +struct intel_bw_state *bw_state = +to_intel_bw_state (dev_priv->bw_obj.state);struct intel_crtc_state *crtc_state =to_intel_crtc_state (crtc->base.state); +struct intel_plane *plane;int min_cdclk =0 ;memset (&crtc->base.mode,0 ,sizeof (crtc->base.mode));
@@ -16456,6 +16479,21 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) dev_priv->min_voltage_level[crtc->pipe] = crtc_state->min_voltage_level; +for_each_intel_plane_on_crtc (&dev_priv->drm, crtc, plane) { +const struct intel_plane_state *plane_state = +to_intel_plane_state (plane->base.state); + +/* +* FIXME don't have the fb yet, so can't +* use intel_plane_data_rate() :( +*/ +if (plane_state->base.visible) + crtc_state->data_rate[plane->id] = +4 * crtc_state->pixel_rate; + } + +intel_bw_crtc_update (bw_state, crtc_state); +intel_pipe_config_sanity_check (dev_priv, crtc_state); } }
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -885,6 +885,8 @@ struct intel_crtc_state {struct intel_crtc_wm_state wm; +u32 data_rate[I915_MAX_PLANES ]; +/* Gamma mode programmed on the pipe */ u32 gamma_mode;
Signature · 6 lines
2.21.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v6 2/2] drm/i915: Make sure we have enough memory bandwidth on ICL
Quoted 37 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
ICL has so many planes that it can easily exceed the maximum effective memory bandwidth of the system. We must therefore check that we don't exceed that limit.
The algorithm is very magic number heavy and lacks sufficient explanation for now. We also have no sane way to query the memory clock and timings, so we must rely on a combination of raw readout from the memory controller and hardcoded assumptions. The memory controller values obviously change as the system jumps between the different SAGV points, so we try to stabilize it first by disabling SAGV for the duration of the readout.
The utilized bandwidth is tracked via a device wide atomic private object. That is actually not robust because we can't afford to enforce strict global ordering between the pipes. Thus I think I'll need to change this to simply chop up the available bandwidth between all the active pipes. Each pipe can then do whatever it wants as long as it doesn't exceed its budget. That scheme will also require that we assume that any number of planes could be active at any time.
TODO: make it robust and deal with all the open questions
v2: Sleep longer after disabling SAGV
v3: Poll for the dclk to get raised (seen it take 250ms!)
If the system has 2133MT/s memory then we pointlessly wait one full second :(
v4: Use the new pcode interface to get the qgv points rather
that using hardcoded numbers
v5: Move the pcode stuff intointel_bw.c(Matt)
s/intel_sagv_info/intel_qgv_info/
Do the NV12/P010 as per spec for now (Matt) s/IS_ICELAKE/IS_GEN11/
v6: Ignore bandwidth limits if the pcode query fails
Quoted 3 lines
Signed-off-by Ville Syrjälä <[email protected]>Reviewed-by Matt Roper <[email protected]>Acked-by Clint Taylor <[email protected]>
Series pushed to dinq. Thanks for the reviews.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
URL : https://patchwork.freedesktop.org/series/60921/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip e58657ffae31 drm/i915: Make sandybridge_pcode_read() deal with the second data register 87c37601e967 drm/i915: Make sure we have enough memory bandwidth on ICL -:185: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #185: new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 669 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
URL : https://patchwork.freedesktop.org/series/60921/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: drm/i915: Make sandybridge_pcode_read() deal with the second data register Okay!
Commit: drm/i915: Make sure we have enough memory bandwidth on ICL +drivers/gpu/drm/i915/intel_bw.c:129:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:129:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:167:19: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:167:19: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:169:20: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:169:20: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:189:30: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:189:30: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:193:44: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:193:44: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:238:24: warning: expression using sizeof(void) +./include/uapi/linux/perf_event.h:147:56: warning: cast truncates bits from constant value (8000000000000000 becomes 0)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
URL : https://patchwork.freedesktop.org/series/60921/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6114 -> Patchwork_13064
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_13064:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@i915_pm_rpm@module-reload:
- {fi-icl-y}: [PASS][1] -> [DMESG-WARN][2] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-icl-y/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-icl-y/igt@[email protected]
* igt@kms_flip@basic-flip-vs-modeset:
- {fi-icl-y}: [PASS][3] -> [FAIL][4] +15 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-icl-y/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-icl-y/igt@[email protected]
* igt@prime_vgem@basic-fence-flip:
- {fi-icl-y}: [PASS][5] -> [SKIP][6] +2 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-icl-y/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-icl-y/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_13064 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_selftest@live_evict:
- fi-bsw-kefka: [PASS][7] -> [DMESG-WARN][8] ([fdo#107709])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-bsw-kefka/igt@i915_selftest@live_evict.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-bsw-kefka/igt@i915_selftest@live_evict.html
#### Possible fixes ####
* igt@gem_basic@create-fd-close:
- {fi-icl-u3}: [DMESG-WARN][9] ([fdo#107724]) -> [PASS][10] +2 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-icl-u3/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-icl-u3/igt@[email protected]
* igt@i915_selftest@live_contexts:
- fi-bdw-gvtdvm: [DMESG-FAIL][11] ([fdo#110235]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-bdw-gvtdvm/igt@i915_selftest@live_contexts.html
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-bdw-gvtdvm/igt@i915_selftest@live_contexts.html
* igt@i915_selftest@live_hangcheck:
- {fi-icl-y}: [INCOMPLETE][13] ([fdo#107713] / [fdo#108569]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-icl-y/igt@i915_selftest@live_hangcheck.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-icl-y/igt@i915_selftest@live_hangcheck.html
#### Warnings ####
* igt@i915_selftest@live_hangcheck:
- fi-apl-guc: [FAIL][15] ([fdo#110623]) -> [DMESG-FAIL][16] ([fdo#110620])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-apl-guc/igt@i915_selftest@live_hangcheck.html
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-apl-guc/igt@i915_selftest@live_hangcheck.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#109052]: https://bugs.freedesktop.org/show_bug.cgi?id=109052
[fdo#110235]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
[fdo#110620]: https://bugs.freedesktop.org/show_bug.cgi?id=110620
[fdo#110623]: https://bugs.freedesktop.org/show_bug.cgi?id=110623
Participating hosts (53 -> 44)
------------------------------
Missing (9): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-skl-guc fi-byt-squawks fi-icl-u2 fi-bsw-cyan fi-byt-clapper fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_6114 -> Patchwork_13064
CI_DRM_6114: 8691fe536e41c852d3d420ed09b1d5f9916031e7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5000: f9961d14d76b3a0fa1296e547f7c065e2f93955c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13064: 87c37601e967d319534a5e4d8c74af09795458be @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
87c37601e967 drm/i915: Make sure we have enough memory bandwidth on ICL e58657ffae31 drm/i915: Make sandybridge_pcode_read() deal with the second data register
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✓ Fi.CI.BAT: success for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
Quoted 29 lines · Patchwork
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make
sandybridge_pcode_read()deal with the second data register
URL : https://patchwork.freedesktop.org/series/60921/
State : success== Summary ==
CI Bug Log - changes from
CI_DRM_6114->Patchwork_13064
====================================================Summary
-------**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/
Possible new issues
-------------------Here are the unknown changes that may have been introduced in
Patchwork_13064:### IGT changes ###
#### Suppressed ####
Quoted 7 lines
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@i915_pm_rpm@module-reload:
- {fi-icl-y}: [PASS][1] -> [DMESG-WARN][2] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/fi-icl-y/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/fi-icl-y/igt@[email protected]
Sigh. Looks like pcode on this icl-y doesn't support the new commands to retrieve the memory subsystem information. BIOS update maybe could fix that?
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register
URL : https://patchwork.freedesktop.org/series/60921/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_6114_full -> Patchwork_13064_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_13064_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_13064_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_13064_full:
### IGT changes ###
#### Possible regressions ####
* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
- shard-hsw: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-hsw7/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-hsw8/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_13064_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: [PASS][3] -> [FAIL][4] ([fdo#108686])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-hsw7/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-hsw8/igt@[email protected]
* igt@i915_suspend@fence-restore-untiled:
- shard-apl: [PASS][5] -> [DMESG-WARN][6] ([fdo#108566]) +3 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-apl7/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-apl6/igt@[email protected]
* igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: [PASS][7] -> [FAIL][8] ([fdo#106509] / [fdo#107409])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-glk3/igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-glk1/igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic.html
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-shrfb-draw-pwrite:
- shard-hsw: [PASS][9] -> [INCOMPLETE][10] ([fdo#103540])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-hsw7/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-shrfb-draw-pwrite.html
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-hsw2/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-shrfb-draw-pwrite.html
* igt@kms_frontbuffer_tracking@fbc-badstride:
- shard-iclb: [PASS][11] -> [FAIL][12] ([fdo#103167]) +8 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb3/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb8/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-suspend:
- shard-skl: [PASS][13] -> [INCOMPLETE][14] ([fdo#104108] / [fdo#106978])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl3/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl2/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min:
- shard-skl: [PASS][15] -> [FAIL][16] ([fdo#108145])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl6/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl2/igt@[email protected]
* igt@kms_plane_lowres@pipe-a-tiling-y:
- shard-iclb: [PASS][17] -> [FAIL][18] ([fdo#103166])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb3/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb5/igt@[email protected]
* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: [PASS][19] -> [SKIP][20] ([fdo#109441]) +1 similar issue
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb2/igt@kms_psr@psr2_cursor_mmap_cpu.html
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb5/igt@kms_psr@psr2_cursor_mmap_cpu.html
#### Possible fixes ####
* igt@gem_eio@in-flight-suspend:
- shard-apl: [FAIL][21] -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-apl7/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-apl6/igt@[email protected]
* igt@gem_exec_flush@basic-uc-rw-default:
- shard-iclb: [INCOMPLETE][23] ([fdo#107713]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb7/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb3/igt@[email protected]
* igt@gem_pwrite@big-gtt-forwards:
- shard-glk: [INCOMPLETE][25] ([fdo#103359] / [k.org#198133]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-glk5/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-glk7/igt@[email protected]
* igt@i915_pm_rpm@fences:
- shard-skl: [INCOMPLETE][27] ([fdo#107807]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl10/igt@[email protected]
* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-skl: [INCOMPLETE][29] ([fdo#104108]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl2/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl6/igt@[email protected]
* igt@kms_atomic_interruptible@universal-setplane-primary:
- shard-apl: [INCOMPLETE][31] ([fdo#103927]) -> [PASS][32] +1 similar issue
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-apl5/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-apl5/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size:
- shard-skl: [FAIL][33] ([fdo#102670]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl4/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl10/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-msflip-blt:
- shard-iclb: [FAIL][35] ([fdo#103167]) -> [PASS][36] +3 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb8/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb1/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc:
- shard-skl: [FAIL][37] ([fdo#103167]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl2/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc.html
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl3/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc.html
* igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
- shard-skl: [FAIL][39] ([fdo#108145]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-skl2/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-skl3/igt@[email protected]
* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][41] ([fdo#109441]) -> [PASS][42] +3 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb8/igt@kms_psr@psr2_cursor_render.html
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][43] ([fdo#99912]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-apl3/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-apl4/igt@[email protected]
- shard-kbl: [FAIL][45] ([fdo#99912]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-kbl7/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-kbl6/igt@[email protected]
* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-apl: [DMESG-WARN][47] ([fdo#108566]) -> [PASS][48] +4 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-apl8/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-apl3/igt@[email protected]
* igt@perf@polling:
- shard-iclb: [FAIL][49] -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb4/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb6/igt@[email protected]
#### Warnings ####
* igt@gem_mmap_gtt@forked-big-copy:
- shard-iclb: [INCOMPLETE][51] ([fdo#107713] / [fdo#109100]) -> [TIMEOUT][52] ([fdo#109673])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-iclb5/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-iclb2/igt@[email protected]
* igt@kms_vblank@pipe-c-wait-idle-hang:
- shard-snb: [SKIP][53] ([fdo#109271] / [fdo#109278]) -> [SKIP][54] ([fdo#109271])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6114/shard-snb1/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/shard-snb2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102670]: https://bugs.freedesktop.org/show_bug.cgi?id=102670
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#106978]: https://bugs.freedesktop.org/show_bug.cgi?id=106978
[fdo#107409]: https://bugs.freedesktop.org/show_bug.cgi?id=107409
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109673]: https://bugs.freedesktop.org/show_bug.cgi?id=109673
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* Linux: CI_DRM_6114 -> Patchwork_13064
CI_DRM_6114: 8691fe536e41c852d3d420ed09b1d5f9916031e7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5000: f9961d14d76b3a0fa1296e547f7c065e2f93955c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13064: 87c37601e967d319534a5e4d8c74af09795458be @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13064/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
URL : https://patchwork.freedesktop.org/series/60921/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 7c375533ea71 drm/i915: Make sandybridge_pcode_read() deal with the second data register 77c8f2cf64cc drm/i915: Make sure we have enough memory bandwidth on ICL -:186: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #186: new file mode 100644
-:404: WARNING:TYPO_SPELLING: 'succesfully' may be misspelled - perhaps 'successfully'? #404: FILE: drivers/gpu/drm/i915/intel_bw.c:214:
+ /* Did we initialize the bw limits succesfully? */
total: 0 errors, 2 warnings, 0 checks, 675 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
URL : https://patchwork.freedesktop.org/series/60921/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: drm/i915: Make sandybridge_pcode_read() deal with the second data register Okay!
Commit: drm/i915: Make sure we have enough memory bandwidth on ICL +drivers/gpu/drm/i915/intel_bw.c:129:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:129:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:169:19: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:169:19: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:171:20: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:171:20: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:191:30: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:191:30: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:195:44: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:195:44: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +drivers/gpu/drm/i915/intel_bw.c:244:24: warning: expression using sizeof(void) +./include/uapi/linux/perf_event.h:147:56: warning: cast truncates bits from constant value (8000000000000000 becomes 0)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
URL : https://patchwork.freedesktop.org/series/60921/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6141 -> Patchwork_13091
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/
Known issues
------------
Here are the changes found in Patchwork_13091 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_module_load@reload:
- fi-blb-e6850: [PASS][1] -> [INCOMPLETE][2] ([fdo#107718])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/fi-blb-e6850/igt@[email protected]
* igt@i915_selftest@live_hangcheck:
- fi-icl-u2: [PASS][3] -> [INCOMPLETE][4] ([fdo#107713] / [fdo#108569])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-icl-u2/igt@i915_selftest@live_hangcheck.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/fi-icl-u2/igt@i915_selftest@live_hangcheck.html
* igt@i915_selftest@live_sanitycheck:
- fi-icl-u3: [PASS][5] -> [DMESG-WARN][6] ([fdo#107724])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-icl-u3/igt@i915_selftest@live_sanitycheck.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/fi-icl-u3/igt@i915_selftest@live_sanitycheck.html
#### Possible fixes ####
* igt@gem_mmap_gtt@basic:
- fi-icl-u3: [DMESG-WARN][7] ([fdo#107724]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-icl-u3/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/fi-icl-u3/igt@[email protected]
* igt@i915_pm_rpm@basic-rte:
- fi-skl-6600u: [INCOMPLETE][9] ([fdo#107807]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-skl-6600u/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/fi-skl-6600u/igt@[email protected]
* igt@kms_addfb_basic@bad-pitch-65536:
- {fi-icl-dsi}: [INCOMPLETE][11] ([fdo#107713]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/fi-icl-dsi/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/fi-icl-dsi/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#106107]: https://bugs.freedesktop.org/show_bug.cgi?id=106107
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
Participating hosts (53 -> 46)
------------------------------
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_6141 -> Patchwork_13091
CI_DRM_6141: e94845147cc0346c3a9114d5359b188008daff9d @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5015: cdd6b0a7630762cec14596b9863f418b48c32f46 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13091: 77c8f2cf64cc4aeec7b012c9a2ef6f0c478e4e99 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
77c8f2cf64cc drm/i915: Make sure we have enough memory bandwidth on ICL 7c375533ea71 drm/i915: Make sandybridge_pcode_read() deal with the second data register
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [v5,1/2] drm/i915: Make sandybridge_pcode_read() deal with the second data register (rev2)
URL : https://patchwork.freedesktop.org/series/60921/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6141_full -> Patchwork_13091_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_13091_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_tiled_swapping@non-threaded:
- shard-apl: [PASS][1] -> [DMESG-WARN][2] ([fdo#108686])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-apl6/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-apl1/igt@[email protected]
* igt@i915_suspend@forcewake:
- shard-apl: [PASS][3] -> [DMESG-WARN][4] ([fdo#108566])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-apl8/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-apl4/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-64x64-onscreen:
- shard-skl: [PASS][5] -> [FAIL][6] ([fdo#103232])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl5/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-skl: [PASS][7] -> [FAIL][8] ([fdo#105363])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl4/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl9/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-iclb: [PASS][9] -> [INCOMPLETE][10] ([fdo#107713] / [fdo#109507])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb1/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb5/igt@[email protected]
* igt@kms_flip_event_leak:
- shard-snb: [PASS][11] -> [SKIP][12] ([fdo#109271]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-snb5/igt@kms_flip_event_leak.html
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-snb1/igt@kms_flip_event_leak.html
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-iclb: [PASS][13] -> [FAIL][14] ([fdo#103167]) +7 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb6/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb2/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-skl: [PASS][15] -> [INCOMPLETE][16] ([fdo#104108])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl9/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl1/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-kbl: [PASS][17] -> [DMESG-WARN][18] ([fdo#108566])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-kbl2/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-kbl1/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
- shard-skl: [PASS][19] -> [FAIL][20] ([fdo#108145] / [fdo#110403])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl2/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl5/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
- shard-skl: [PASS][21] -> [FAIL][22] ([fdo#108145])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl4/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl7/igt@[email protected]
* igt@kms_psr2_su@page_flip:
- shard-iclb: [PASS][23] -> [SKIP][24] ([fdo#109642])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb2/igt@kms_psr2_su@page_flip.html
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb6/igt@kms_psr2_su@page_flip.html
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][25] -> [SKIP][26] ([fdo#109441]) +2 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb6/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_setmode@basic:
- shard-hsw: [PASS][27] -> [FAIL][28] ([fdo#99912])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-hsw1/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-hsw6/igt@[email protected]
* igt@kms_sysfs_edid_timing:
- shard-iclb: [PASS][29] -> [FAIL][30] ([fdo#100047])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb1/igt@kms_sysfs_edid_timing.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb2/igt@kms_sysfs_edid_timing.html
#### Possible fixes ####
* igt@debugfs_test@read_all_entries_display_off:
- shard-skl: [INCOMPLETE][31] ([fdo#104108]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl8/igt@debugfs_test@read_all_entries_display_off.html
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl10/igt@debugfs_test@read_all_entries_display_off.html
* igt@gem_exec_schedule@preemptive-hang-render:
- shard-apl: [INCOMPLETE][33] ([fdo#103927]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-apl6/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-apl1/igt@[email protected]
* igt@gem_workarounds@suspend-resume:
- shard-apl: [DMESG-WARN][35] ([fdo#108566]) -> [PASS][36] +5 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-apl6/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-apl4/igt@[email protected]
* igt@i915_pm_rpm@gem-execbuf-stress:
- shard-skl: [INCOMPLETE][37] ([fdo#107803] / [fdo#107807]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl4/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl10/igt@[email protected]
* igt@i915_pm_rpm@gem-idle:
- shard-skl: [INCOMPLETE][39] ([fdo#107807]) -> [PASS][40] +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-skl5/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-skl8/igt@[email protected]
* igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: [FAIL][41] ([fdo#106509] / [fdo#107409]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-glk8/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-glk5/igt@[email protected]
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-hsw: [SKIP][43] ([fdo#109271]) -> [PASS][44] +20 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-hsw1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-hsw5/igt@[email protected]
* igt@kms_flip@2x-modeset-vs-vblank-race:
- shard-glk: [FAIL][45] ([fdo#103060]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-glk1/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-glk2/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-blt:
- shard-iclb: [FAIL][47] ([fdo#103167]) -> [PASS][48] +7 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb7/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-blt.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb7/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-blt.html
* igt@kms_plane_lowres@pipe-a-tiling-x:
- shard-iclb: [FAIL][49] ([fdo#103166]) -> [PASS][50] +1 similar issue
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb8/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb5/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_onoff:
- shard-iclb: [SKIP][51] ([fdo#109441]) -> [PASS][52] +1 similar issue
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb6/igt@kms_psr@psr2_cursor_plane_onoff.html
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb2/igt@kms_psr@psr2_cursor_plane_onoff.html
#### Warnings ####
* igt@gem_mmap_gtt@forked-big-copy-odd:
- shard-iclb: [INCOMPLETE][53] ([fdo#107713] / [fdo#109100]) -> [TIMEOUT][54] ([fdo#109673])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-iclb7/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-iclb7/igt@[email protected]
* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: [FAIL][55] ([fdo#108686]) -> [INCOMPLETE][56] ([fdo#103540])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-hsw8/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-hsw6/igt@[email protected]
* igt@prime_vgem@fence-wait-bsd1:
- shard-snb: [FAIL][57] -> [INCOMPLETE][58] ([fdo#105411])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6141/shard-snb7/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/shard-snb4/igt@[email protected]
[fdo#100047]: https://bugs.freedesktop.org/show_bug.cgi?id=100047
[fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#107409]: https://bugs.freedesktop.org/show_bug.cgi?id=107409
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107803]: https://bugs.freedesktop.org/show_bug.cgi?id=107803
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109507]: https://bugs.freedesktop.org/show_bug.cgi?id=109507
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#109673]: https://bugs.freedesktop.org/show_bug.cgi?id=109673
[fdo#110403]: https://bugs.freedesktop.org/show_bug.cgi?id=110403
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* Linux: CI_DRM_6141 -> Patchwork_13091
CI_DRM_6141: e94845147cc0346c3a9114d5359b188008daff9d @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5015: cdd6b0a7630762cec14596b9863f418b48c32f46 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_13091: 77c8f2cf64cc4aeec7b012c9a2ef6f0c478e4e99 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_13091/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx