Skip to contentSkip to conversation

ath11k: add sta_statistics callback

PATCH In review John Crispin 2 participants 3 messages May 23, 2019 – May 29, 2019 Qualcomm Atheros ATH11K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ath11k: add sta_statistics callback

Add the callback allowing us to pass the rates to userland for iw tool to display.

---
 drivers/net/wireless/ath/ath11k/mac.c | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/net/wireless/ath/ath11k/mac.c +28 -0
index 1bdb6c949585..5bac07ce18bf 100644
@@ -5023,6 +5023,33 @@ static int ath11k_get_survey(struct ieee80211_hw *hw, int idx,
 	return ret;
 }
 
+static void ath11k_sta_statistics(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_sta *sta,
+				  struct station_info *sinfo)
+{
+	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+
+	sinfo->rx_duration = arsta->rx_duration;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
+
+	if (!arsta->txrate.legacy && !arsta->txrate.nss)
+		return;
+
+	if (arsta->txrate.legacy) {
+		sinfo->txrate.legacy = arsta->txrate.legacy;
+	} else {
+		sinfo->txrate.mcs = arsta->txrate.mcs;
+		sinfo->txrate.nss = arsta->txrate.nss;
+		sinfo->txrate.bw = arsta->txrate.bw;
+		sinfo->txrate.he_gi = arsta->txrate.he_gi;
+		sinfo->txrate.he_dcm = arsta->txrate.he_dcm;
+		sinfo->txrate.he_ru_alloc = arsta->txrate.he_ru_alloc;
+	}
+	sinfo->txrate.flags = arsta->txrate.flags;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
+}
+
 static const struct ieee80211_ops ath11k_ops = {
 	.tx				= ath11k_mac_op_tx,
 	.start                          = ath11k_start,
@@ -5053,6 +5080,7 @@ static const struct ieee80211_ops ath11k_ops = {
 	.set_bitrate_mask		= ath11k_mac_op_set_bitrate_mask,
 	.get_survey			= ath11k_get_survey,
 	.flush				= ath11k_flush,
+	.sta_statistics			= ath11k_sta_statistics,
 	CFG80211_TESTMODE_CMD(ath11k_tm_cmd)
 #ifdef CONFIG_MAC80211_DEBUGFS
 	.sta_add_debugfs		= ath11k_sta_add_debugfs,
Signature · 7 lines
2.20.1


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#1 lore raw

PATCH 2/2 ath11k: properly convert bw

The bandwidth inside the TX reporting code is not properly converted from ath11k values to the rate_info ones.

---
 drivers/net/wireless/ath/ath11k/dp_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/dp_rx.c +1 -1
index 71d385cf55d7..38cc787671ee 100644
@@ -954,7 +954,7 @@ ath11k_update_per_peer_tx_stats(struct ath11k *ar,
 	}
 
 	arsta->txrate.nss = nss;
-	arsta->txrate.bw = bw;
+	arsta->txrate.bw = ath11k_bw_to_mac80211_bw(bw);
 	arsta->tx_info.status.rates[0].flags |= ath11k_bw_to_mac80211_bwflags(bw);
 
 	memcpy(&arsta->last_txrate, &arsta->txrate, sizeof(struct rate_info));
Signature · 7 lines
2.20.1


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#2 lore raw
In reply to John Crispin
Quoted 5 lines · John Crispin

Add the callback allowing us to pass the rates to userland for iw tool to display.

2 patches applied to ath.git, thanks.

4ae8ed9835a0 ath11k: add sta_statistics callback
d9a34e89f148 ath11k: properly convert bw

Signature · 9 lines
https://patchwork.kernel.org/patch/10957381/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k