Skip to contentSkip to conversation

need company for kernel upgrade

DISCUSSION walter harms 4 participants 6 messages May 23, 2019 – May 29, 2019 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): CABC7EG8NiiPycthdfb7Ng3MsxTvmmxk_LjcosM8ZD1F0CnuDFw@mail.gmail.com

#2 lore raw

Am 23.05.2019 00:31, schrieb Aung:

Quoted 8 lines

Hello

I thought you build a kernel, then using SCP or dd to overwite uImage file to replace
the previous kernel image into the file system, then reboot it. Or are you trying to
upgrade without rebooting? Cheers!

No,
the company i am working for has a custom build arm-board. We bought the kernel from the assembler but found it has some problems that need fixing.
Basically we want to improve the linux-kernel so it can run native on our boards.

re,
wh

Quoted 25 lines

Sincerely

Aung

Quoted 20 lines · walter harms

the list was silent but NTL.

Hi developers,
i am in search of a company that can help upgrading a running linux-kernel on custom hardware. Est. time 10 days.

The problems are already identified, we are aiming the get the current vanilla linux kernel on the system.

re,
wh

_______________________________________________
linux-arm mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm

#3 lore raw
Quoted 12 lines · walter harms

No,
the company i am working for has a custom build arm-board. We bought the kernel from the assembler but found it has some problems that need fixing.
Basically we want to improve the linux-kernel so it can run native on our boards.

Quoted 4 lines
Quoted 4 lines

Hi developers,
i am in search of a company that can help upgrading a running linux-kernel on custom hardware. Est. time 10 days.

Have you tried contacting Linutronix (https://linutronix.de) or Collabora (https://collabora.com)?

Both have EU offices --- well Collabora does for now, until Brexit happens. :-)

- Ted

#4 lore raw
Quoted 14 lines · Theodore Ts'o
Quoted 12 lines · walter harms

No,
the company i am working for has a custom build arm-board. We bought the kernel from the assembler but found it has some problems that need fixing.
Basically we want to improve the linux-kernel so it can run native on our boards.

Quoted 4 lines
Quoted 4 lines

Hi developers,
i am in search of a company that can help upgrading a running linux-kernel on custom hardware. Est. time 10 days.

Quoted 5 lines

Have you tried contacting Linutronix (https://linutronix.de) or Collabora (https://collabora.com)?

Both have EU offices --- well Collabora does for now, until Brexit happens. :-)

www.denx.de is another option.

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#5 lore raw

On 28.05.19 12:58, Pavel Machek wrote:

Hi,

Quoted 7 lines · Theodore Ts'o
Quoted 6 lines · walter harms
Quoted 5 lines

No,
the company i am working for has a custom build arm-board. We bought the kernel from the assembler but found it has some problems that need fixing.

basic rule: don't use vendor kernels for production, unless you *really* *really* have to.

HW vendors usually don't have the capacities to offer any decent kernel support. there're only few exceptions (eg. phytec) that have their own kernel hackers and actively participate in upstreaming.

Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

Basically we want to improve the linux-kernel so it can run native on our boards.

Quoted 4 lines
Quoted 4 lines

Hi developers,
i am in search of a company that can help upgrading a running linux-kernel on custom hardware. Est. time 10 days.

Quoted 7 lines
Quoted 5 lines

Have you tried contacting Linutronix (https://linutronix.de) or Collabora (https://collabora.com)?

Both have EU offices --- well Collabora does for now, until Brexit happens. :-)

www.denx.de is another option.

continuing the list w/ my own company --> [email protected]

by the way: should we create a separate list for commercial topics ?

--mtx

Signature · 3 lines
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
[email protected] -- +49-151-27565287
#6 lore raw

Am 28.05.2019 21:35, schrieb Enrico Weigelt, metux IT consult:

Quoted 7 lines · Pavel Machek

Hi,

Quoted 3 lines · Theodore Ts'o
Quoted 2 lines · walter harms
Quoted 1 line
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

No,
the company i am working for has a custom build arm-board. We bought the kernel from the assembler but found it has some problems that need fixing.

basic rule: don't use vendor kernels for production, unless you *really* *really* have to.

we have custom hardware, so this was needed. But we used std. parts with existing drivers, so the upcomming problems were hidden in details. Of cause we tested the hardware but you can find only obvious problems.

Quoted 4 lines

HW vendors usually don't have the capacities to offer any decent kernel support. there're only few exceptions (eg. phytec) that have their own kernel hackers and actively participate in upstreaming.

We have noticed that also, *active* is a big point.

Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Quoted 8 lines

Basically we want to improve the linux-kernel so it can run native on our boards.

Quoted 4 lines
Quoted 4 lines

Hi developers,
i am in search of a company that can help upgrading a running linux-kernel on custom hardware. Est. time 10 days.

Have you tried contacting Linutronix (https://linutronix.de) or Collabora (https://collabora.com)?

Quoted 9 lines
Quoted 4 lines
Quoted 2 lines

Both have EU offices --- well Collabora does for now, until Brexit happens. :-)

www.denx.de is another option.

continuing the list w/ my own company --> [email protected]

by the way: should we create a separate list for commercial topics ?

I used linux-arm and it worked surprisingly well (not all mails went truh the list) but it look very silent and i was unsure if they were still alive. A big win for everyone would be a FAQ/Lessons-learned something you can take to check a contract. the customer will know what to expect and the contractor will know what to offer.

Having something a list of minimum requirements like that FAQ would improve the stand of the hardware developed to support linux. Not everyone has a big budget or need to produce in millions like the raspi guys did, and even they have sometimes troubles.

note: that will not solve every proble but even a starting point would be good.

re,
wh

#7 lore raw

On 29.05.19 10:04, walter harms wrote:

Hi,

Quoted 4 lines
Quoted 2 lines

basic rule: don't use vendor kernels for production, unless you *really* *really* have to.

we have custom hardware, so this was needed.

Custom hardware doesn't necessarily need a vendor kernel. Most cases should be happy w/ board specific DTS, possibly some extra drivers, sometimes perhaps a few extra tuning patches.

But: such development, IMHO, should always happen on recent mainline and things that aren't really customer specific should be upstreamed as early as possible.

Vendor kernels are a different thing: usually they pick some older base versions, do lots of strange things to get their hw somehow working, and - one of the worst things one could do - merge down things from mainline into their fork. After a few iterations, the code gets pretty much unmaintainable. Such things are probably nice for a sales demo, perhaps emc tests, but certainly not for production.

Just have a look at typical android vendor kernels. Horrible.

Quoted 5 lines
Quoted 3 lines

HW vendors usually don't have the capacities to offer any decent kernel support. there're only few exceptions (eg. phytec) that have their own kernel hackers and actively participate in upstreaming.

We have noticed that also, *active* is a big point.

Yes, but most hw vendors even never have been active in the first place.

Even if a particular company is doing that in *some* area, it doesn't necessarily mean they're doing it for your particular product. Just look at Intel, and what mess the produced for their flopped sofia soc.

Quoted 5 lines
Quoted 2 lines

by the way: should we create a separate list for commercial topics ?

I used linux-arm and it worked surprisingly well (not all mails went truh the list) but it look very silent and i was unsure if they were still alive.

IIRC, linux-arm is for arm specific development. Sure, the chance of finding some consultant there is better there, as arm just has a huge market share in embedded world.

Quoted 3 lines

A big win
for everyone would be a FAQ/Lessons-learned something you can take to check a contract. the customer will know what to expect and the contractor will know what to offer.

hmm, if anybody else here is interested in that, let's start with that. maybe these discussions might be better off-list ?

Quoted 3 lines

Having something a list of minimum requirements like that FAQ would improve the stand of the hardware developed to support linux. Not everyone has a big budget or need to produce in millions like the raspi guys did, and even they have sometimes troubles.

Well, one of the basic rules, IMHO, would be: if you're going to do some linux embedded project, you should do a proper evaluation:

* check whether the board is already supported by mainline kernel (try to get a running mainline kernel built by yourself)
* never use vendor kernels at all
* check whether your supplier has active kernel hackers and actually does mainline integration
* if you run into any problems here, call in a linux embedded and kernel export - *soon* in the project

You spend a few extra bucks for the consultant, but he'll protect you from the wrong choices, eg. buying unsupported / badly supported hardware.

In recent years, I had many clients that called me in far too late.

One eg. was trying to build a medical device, using custom boards (very high hw development costs and long timeline, due to qualifactions, etc), with fancy HMI, but picked imx53, where no *usable* gpu driver exists. When I brought the bad news, the project already ran for several years and nobody dared to restart board development. (in the meantime, long after i've gone, they indeed create a new board w/ mx6).

Such things could easily prevented if people just wouldn't trust the hw vendor at all and ask us (kernel hackers) early.

--mtx

Signature · 3 lines
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
[email protected] -- +49-151-27565287