Add imx7ulp USBOTG1 support
Subsystems (5)
v3 cover Add imx7ulp USBOTG1 support
Changes for v3:
- Using readl_poll_timeout to replace private function. [Patch 2/8]
- Add more commit log for new flag CI_HDRC_PMQOS. [Patch 5/8]
- Move 'compatible' at the beginning of propeties. [Patch 6/8]
Changes for v2:
- Use common 'phys' property [Patch 6/8]
- Add the last patch that "fsl,usbphy" phandle is not mandatory now [Patch 8/8]
- Add Reviewed-by from Rob.
There is a dual-role USB controller at imx7ulp, we add support for it in this patch set, and the dual-role function is tested at imx7ulp-evk board.
Thanks.
Peter Chen (8):
doc: dt-binding: mxs-usb-phy: add compatible for 7ulp
usb: phy: phy-mxs-usb: add imx7ulp support
doc: dt-binding: ci-hdrc-usb2: add compatible string for imx7ulp
doc: dt-binding: usbmisc-imx: add compatible string for imx7ulp
usb: chipidea: imx: add imx7ulp support
ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
ARM: dts: imx7ulp-evk: enable USBOTG1 support
usb: chipidea: imx: "fsl,usbphy" phandle is not mandatory now
.../devicetree/bindings/phy/mxs-usb-phy.txt | 1 + .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 + .../devicetree/bindings/usb/usbmisc-imx.txt | 1 + arch/arm/boot/dts/imx7ulp-evk.dts | 35 +++++++++++ arch/arm/boot/dts/imx7ulp.dtsi | 31 ++++++++++ drivers/usb/chipidea/ci_hdrc_imx.c | 33 ++++++++++- drivers/usb/chipidea/usbmisc_imx.c | 4 ++ drivers/usb/phy/phy-mxs-usb.c | 67 +++++++++++++++++++++- include/linux/usb/chipidea.h | 1 + 9 files changed, 170 insertions(+), 4 deletions(-)
Signature · 1 line
2.14.1
PATCH v3 1/8 doc: dt-binding: mxs-usb-phy: add compatible for 7ulp
Add compatible for 7ulp USB PHY.
--- Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +1 -0
@@ -7,6 +7,7 @@ Required properties: * "fsl,imx6sl-usbphy" for imx6sl * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx + * "fsl,imx7ulp-usbphy" for imx7ulp "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt
Signature · 1 line
2.14.1
PATCH v3 2/8 usb: phy: phy-mxs-usb: add imx7ulp support
In reply to Peter ChenAt imx7ulp, the USB related analog register is located in PHY register region too, so we need to control PLL at PHY driver directly.
--- drivers/usb/phy/phy-mxs-usb.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-)
drivers/usb/phy/phy-mxs-usb.c +66 -1
@@ -17,9 +17,11 @@#include <linux/of_device.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/iopoll.h> #define DRIVER_NAME "mxs_phy" +/* Register Macro */ #define HW_USBPHY_PWD 0x00#define HW_USBPHY_TX 0x10#define HW_USBPHY_CTRL 0x30
@@ -37,6 +39,11 @@#define GM_USBPHY_TX_TXCAL45DN (x) (((x) & 0xf) << 8)#define GM_USBPHY_TX_D_CAL (x) (((x) & 0xf) << 0) +/* imx7ulp */ +#define HW_USBPHY_PLL_SIC 0xa0 +#define HW_USBPHY_PLL_SIC_SET 0xa4 +#define HW_USBPHY_PLL_SIC_CLR 0xa8 +#define BM_USBPHY_CTRL_SFTRST BIT(31)#define BM_USBPHY_CTRL_CLKGATE BIT(30)#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
@@ -55,6 +62,12 @@#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))#define BM_USBPHY_DEBUG_CLKGATE BIT(30) +/* imx7ulp */ +#define BM_USBPHY_PLL_LOCK BIT(31) +#define BM_USBPHY_PLL_REG_ENABLE BIT(21) +#define BM_USBPHY_PLL_BYPASS BIT(16) +#define BM_USBPHY_PLL_POWER BIT(12) +#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6)/* Anatop Registers */ #define ANADIG_ANA_MISC0 0x150
@@ -167,6 +180,9 @@ static const struct mxs_phy_data imx6ul_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; +static const struct mxs_phy_data imx7ulp_phy_data = { +}; +static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible ="fsl,imx6sx-usbphy" , .data = &imx6sx_phy_data, }, { .compatible ="fsl,imx6sl-usbphy" , .data = &imx6sl_phy_data, },
@@ -174,6 +190,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, + { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
@@ -198,6 +215,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)return mxs_phy->data == &imx6sl_phy_data; } +static inline bool is_imx7ulp_phy (struct mxs_phy *mxs_phy) +{ +return mxs_phy->data == &imx7ulp_phy_data; +} +/* * PHY needs some 32K cycles to switch from 32K clock to * bus (such as AHB/AXI, etc) clock.
@@ -221,14 +243,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) } } +static int mxs_phy_pll_enable (void __iomem *base,bool enable) +{ +int ret =0 ; + +if (enable) { +u32 value; + +writel (BM_USBPHY_PLL_REG_ENABLE , base +HW_USBPHY_PLL_SIC_SET ); +writel (BM_USBPHY_PLL_BYPASS , base +HW_USBPHY_PLL_SIC_CLR ); +writel (BM_USBPHY_PLL_POWER , base +HW_USBPHY_PLL_SIC_SET ); + ret =readl_poll_timeout (base +HW_USBPHY_PLL_SIC , + value, (value &BM_USBPHY_PLL_LOCK ) !=0 , +100 ,10000 ); +if (ret) +return ret; + +writel (BM_USBPHY_PLL_EN_USB_CLKS , base + +HW_USBPHY_PLL_SIC_SET ); + }else { +writel (BM_USBPHY_PLL_EN_USB_CLKS , base + +HW_USBPHY_PLL_SIC_CLR ); +writel (BM_USBPHY_PLL_POWER , base +HW_USBPHY_PLL_SIC_CLR ); +writel (BM_USBPHY_PLL_BYPASS , base +HW_USBPHY_PLL_SIC_SET ); +writel (BM_USBPHY_PLL_REG_ENABLE , base +HW_USBPHY_PLL_SIC_CLR ); + } + +return ret; +} +static int mxs_phy_hw_init (struct mxs_phy *mxs_phy) {int ret;void __iomem *base = mxs_phy->phy.io_priv; +if (is_imx7ulp_phy (mxs_phy)) { + ret =mxs_phy_pll_enable (base, true); +if (ret) +return ret; + } + ret =stmp_reset_block (base +HW_USBPHY_CTRL );if (ret) -return ret; + goto disable_pll;/* Power up the PHY */ writel (0 , base +HW_USBPHY_PWD );
@@ -253,6 +310,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)mxs_phy_tx_init (mxs_phy);return 0 ; + +disable_pll: +if (is_imx7ulp_phy (mxs_phy)) +mxs_phy_pll_enable (base, false); +return ret; }/* Return true if the vbus is there */
@@ -374,6 +436,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy)writel (BM_USBPHY_CTRL_CLKGATE , phy->io_priv +HW_USBPHY_CTRL_SET ); +if (is_imx7ulp_phy (mxs_phy)) +mxs_phy_pll_enable (phy->io_priv, false); +clk_disable_unprepare (mxs_phy->clk); }
Signature · 1 line
2.14.1
PATCH v3 3/8 doc: dt-binding: ci-hdrc-usb2: add compatible string for imx7ulp
In reply to Peter ChenAdd compatible string for imx7ulp.
--- Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +1 -0
@@ -10,6 +10,7 @@ Required properties: "fsl,imx6sx-usb" "fsl,imx6ul-usb" "fsl,imx7d-usb" + "fsl,imx7ulp-usb" "lsi,zevio-usb" "qcom,ci-hdrc" "chipidea,usb2"
Signature · 1 line
2.14.1
PATCH v3 4/8 doc: dt-binding: usbmisc-imx: add compatible string for imx7ulp
In reply to Peter ChenAdd compatible string for imx7ulp
--- Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/usbmisc-imx.txt +1 -0
@@ -7,6 +7,7 @@ Required properties: "fsl,vf610-usbmisc" for Vybrid vf610 "fsl,imx6sx-usbmisc" for imx6sx "fsl,imx7d-usbmisc" for imx7d + "fsl,imx7ulp-usbmisc" for imx7ulp - reg: Should contain registers location and length Examples:
Signature · 1 line
2.14.1
PATCH v3 5/8 usb: chipidea: imx: add imx7ulp support
In reply to Peter ChenIn this commit, we add CI_HDRC_PMQOS to avoid system entering idle, at imx7ulp, if the system enters idle, the DMA will stop, so the USB transfer can't work at this case.
--- drivers/usb/chipidea/ci_hdrc_imx.c | 28 +++++++++++++++++++++++++++- drivers/usb/chipidea/usbmisc_imx.c | 4 ++++ include/linux/usb/chipidea.h | 1 + 3 files changed, 32 insertions(+), 1 deletion(-)
drivers/usb/chipidea/ci_hdrc_imx.c +27 -1
@@ -13,6 +13,7 @@#include <linux/usb/of.h> #include <linux/clk.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_qos.h> #include "ci.h" #include "ci_hdrc_imx.h"
@@ -63,6 +64,11 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = { .flags = CI_HDRC_SUPPORTS_RUNTIME_PM, }; +static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = { + .flags =CI_HDRC_SUPPORTS_RUNTIME_PM | +CI_HDRC_PMQOS , +}; +static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible ="fsl,imx23-usb" , .data = &imx23_usb_data}, { .compatible ="fsl,imx28-usb" , .data = &imx28_usb_data},
@@ -72,6 +78,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data}, { .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data}, { .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data}, + { .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data}, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, ci_hdrc_imx_dt_ids);
@@ -93,6 +100,8 @@ struct ci_hdrc_imx_data {struct clk *clk_ahb;struct clk *clk_per;/* --------------------------------- */ +struct pm_qos_request pm_qos_req; +const struct ci_hdrc_imx_platform_flag *plat_data; };/* Common functions shared by usbmisc drivers */
@@ -309,6 +318,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)if (!data)return -ENOMEM ; + data->plat_data = imx_platform_flag; + pdata.flags |= imx_platform_flag->flags;platform_set_drvdata (pdev, data); data->usbmisc_data =usbmisc_get_init_data (dev);if (IS_ERR (data->usbmisc_data))
@@ -369,6 +380,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) } } } + +if (pdata.flags &CI_HDRC_PMQOS ) +pm_qos_add_request (&data->pm_qos_req, +PM_QOS_CPU_DMA_LATENCY ,0 ); + ret =imx_get_clks (dev);if (ret) goto disable_hsic_regulator;
@@ -396,7 +412,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)usb_phy_init (pdata.usb_phy); } - pdata.flags |= imx_platform_flag->flags;if (pdata.flags &CI_HDRC_SUPPORTS_RUNTIME_PM ) data->supports_runtime_pm = true;
@@ -439,6 +454,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) disable_hsic_regulator:if (data->hsic_pad_regulator) ret =regulator_disable (data->hsic_pad_regulator); +if (pdata.flags &CI_HDRC_PMQOS ) +pm_qos_remove_request (&data->pm_qos_req);return ret; }
@@ -455,6 +472,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)if (data->override_phy_control)usb_phy_shutdown (data->phy);imx_disable_unprepare_clks (&pdev->dev); +if (data->plat_data->flags &CI_HDRC_PMQOS ) +pm_qos_remove_request (&data->pm_qos_req);if (data->hsic_pad_regulator)regulator_disable (data->hsic_pad_regulator);
@@ -480,6 +499,9 @@ static int __maybe_unused imx_controller_suspend(struct device *dev) }imx_disable_unprepare_clks (dev); +if (data->plat_data->flags &CI_HDRC_PMQOS ) +pm_qos_remove_request (&data->pm_qos_req); + data->in_lpm = true;return 0 ;
@@ -497,6 +519,10 @@ static int __maybe_unused imx_controller_resume(struct device *dev)return 0 ; } +if (data->plat_data->flags &CI_HDRC_PMQOS ) +pm_qos_add_request (&data->pm_qos_req, +PM_QOS_CPU_DMA_LATENCY ,0 ); + ret =imx_prepare_enable_clks (dev);if (ret)return ret;
drivers/usb/chipidea/usbmisc_imx.c +4 -0
@@ -763,6 +763,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,imx7d-usbmisc", .data = &imx7d_usbmisc_ops, }, + { + .compatible = "fsl,imx7ulp-usbmisc", + .data = &imx7d_usbmisc_ops, + }, {/* sentinel */ } };MODULE_DEVICE_TABLE (of, usbmisc_imx_dt_ids);
include/linux/usb/chipidea.h +1 -0
@@ -61,6 +61,7 @@ struct ci_hdrc_platform_data {#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12)/* Glue layer manages phy */ #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)#define CI_HDRC_IMX_IS_HSIC BIT(14) +#define CI_HDRC_PMQOS BIT(15)enum usb_dr_mode dr_mode;#define CI_HDRC_CONTROLLER_RESET_EVENT 0#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
Signature · 1 line
2.14.1
PATCH v3 6/8 ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
In reply to Peter ChenAdd imx7ulp USBOTG1 support.
--- arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
arch/arm/boot/dts/imx7ulp.dtsi +31 -0
@@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus {
@@ -133,6 +134,36 @@ clock-names = "ipg", "per"; }; + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usbphy@0x40350000 { + compatible = "fsl,imx7ulp-usbphy", + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>;
Signature · 1 line
2.14.1
Re: [PATCH v3 6/8] ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
Quoted 20 lines · Peter Chen
Add imx7ulp USBOTG1 support.
Signed-off-by Peter Chen <[email protected]>--- arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)arch/arm/boot/dts/imx7ulp.dtsi +1
-0@@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus {
arch/arm/boot/dts/imx7ulp.dtsi line 139
Quoted 6 lines
arch/arm/boot/dts/imx7ulp.dtsi +3
-0@@ -133,6 +134,36 @@ clock-names = "ipg", "per"; }; + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb";
If "fsl,imx6ul-usb" is the one that imx7ulp device is compatible with and will match in driver, "fsl,imx27-usb" can just be dropped. Same comment on usbmisc and usbphy below.
Shawn
Quoted 33 lines
arch/arm/boot/dts/imx7ulp.dtsi +27
-0+ reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usbphy@0x40350000 { + compatible = "fsl,imx7ulp-usbphy", + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>;Signature · 1 line
2.14.1
RE: [PATCH v3 6/8] ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
Quoted 23 lines
Quoted 23 lines
Signed-off-by Peter Chen <[email protected]>--- arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)(quoted diff) +0
-0
b/arch/arm/boot/dts/imx7ulp.dtsiindexfca6e50f37c8..37b058119505100644arch/arm/boot/dts/imx7ulp.dtsi +1
-0@@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus {@@ -133,6 +134,36 @@ clock-names = "ipg", "per"; };
Quoted 8 lines
arch/arm/boot/dts/imx7ulp.dtsi line 139
Quoted 3 lines
arch/arm/boot/dts/imx7ulp.dtsi +3
-0+ usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb";If "fsl,imx6ul-usb" is the one that imx7ulp device is compatible with and will match in driver, "fsl,imx27-usb" can just be dropped. Same comment on usbmisc and usbphy below.
Ok, will change, thanks.
Peter
Quoted 35 lines
Shawn
Quoted 33 lines
arch/arm/boot/dts/imx7ulp.dtsi +27
-1+ reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usbphy@0x40350000 { + compatible = "fsl,imx7ulp-usbphy", + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>; --2.14.1
PATCH v3 7/8 ARM: dts: imx7ulp-evk: enable USBOTG1 support
In reply to Peter ChenEnable USBOTG1 support for evk board, it is dual-role function port.
--- arch/arm/boot/dts/imx7ulp-evk.dts | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
arch/arm/boot/dts/imx7ulp-evk.dts +35 -0
@@ -22,6 +22,17 @@ reg = <0x60000000 0x40000000>; }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vsd_3v3: regulator-vsd-3v3 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3";
@@ -40,6 +51,17 @@ status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + status = "okay"; +}; + &usdhc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>;
@@ -57,6 +79,19 @@ bias-pull-up; }; + pinctrl_usbotg1_vbus: otg1vbusgrp { + fsl,pins = < + IMX7ULP_PAD_PTC0__PTC0 0x20000 + >; + }; + + pinctrl_usbotg1_id: otg1idgrp { + fsl,pins = < + IMX7ULP_PAD_PTC13__USB0_ID 0x10003 + IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 + >; + }; + pinctrl_usdhc0: usdhc0grp { fsl,pins = < IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43
Signature · 1 line
2.14.1
PATCH v3 8/8 usb: chipidea: imx: "fsl, usbphy" phandle is not mandatory now
In reply to Peter ChenSince the chipidea common code support get the USB PHY phandle from "phys", the glue layer is not mandatory to get the "fsl,usbphy" phandle any more.
--- drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/usb/chipidea/ci_hdrc_imx.c +3 -2
@@ -398,8 +398,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) ret =PTR_ERR (data->phy);/* Return -EINVAL if no usbphy is available */ if (ret == -ENODEV ) - ret = -EINVAL ; - goto err_clk; + data->phy =NULL ; +else + goto err_clk; } pdata.usb_phy = data->phy;
Signature · 1 line
2.14.1