arm64: dts: armada-3720-espressobin: correct spi node
Subsystems (2)
PATCH 1/1 arm64: dts: armada-3720-espressobin: correct spi node
The manufacturer of this board, ships it with various SPI NOR chips and increments U-Boot bootloader version along the time. There is no way to tell which is placed on the board since no revision bump takes place. This creates two issues.
The first, cosmetic. Since the NOR chip may differ, there's message on boot stating that kernel expected w25q32dw and found different one. To correct this, remove optional device-specific compatible string. Being here lets replace bogus "spi-flash" compatible string with proper one.
The second is linked to partitions layout, it changed after commit:81e7251252 ("arm64: mvebu: config: move env to the end of the 4MB boot device") in Marvells downstream U-Boot fork [1], shifting environment location to the end of boot device. Since the new boards will have U-Boot with this change, it'll lead to improper results writing or reading from these partitions. We can't tell if users will update bootloader to recent version provided on manufacturer website, so lets drop partitons layout.
1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
--- .../dts/marvell/armada-3720-espressobin.dts | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +1 -17
@@ -95,25 +95,9 @@ flash@0 { reg = <0>; - compatible = "winbond,w25q32dw", "jedec,spi-flash"; + compatible = "jedec,spi-nor"; spi-max-frequency = <104000000>; m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0 0x180000>; - }; - - partition@180000 { - label = "ubootenv"; - reg = <0x180000 0x10000>; - }; - }; }; };
Signature · 1 line
2.21.0
Hi,
yes, I agree on this personally. I meant to correct this myself or at least try to, but I didn't have time, as I was the one that found out how they did their partition layout previously, this used to be good so I asked Uwe Kleine-König if he could get this patch upstreamed, but as it is I myself upgraded U-Boot and cannot make use of it anymore. Thanks
Tomasz Maciej Nowak a écrit :
Quoted 57 lines
The manufacturer of this board, ships it with various SPI NOR chips and increments U-Boot bootloader version along the time. There is no way to tell which is placed on the board since no revision bump takes place. This creates two issues.
The first, cosmetic. Since the NOR chip may differ, there's message on boot stating that kernel expected w25q32dw and found different one. To correct this, remove optional device-specific compatible string. Being here lets replace bogus "spi-flash" compatible string with proper one.
The second is linked to partitions layout, it changed after commit:
81e7251252("arm64: mvebu: config: move env to the end of the 4MB boot device") in Marvells downstream U-Boot fork [1], shifting environment location to the end of boot device. Since the new boards will have U-Boot with this change, it'll lead to improper results writing or reading from these partitions. We can't tell if users will update bootloader to recent version provided on manufacturer website, so lets drop partitons layout.1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
Signed-off-by Tomasz Maciej Nowak <[email protected]>--- .../dts/marvell/armada-3720-espressobin.dts | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +1
-17@@ -95,25 +95,9 @@ flash@0 { reg = <0>; - compatible = "winbond,w25q32dw", "jedec,spi-flash"; + compatible = "jedec,spi-nor"; spi-max-frequency = <104000000>; m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0 0x180000>; - }; - - partition@180000 { - label = "ubootenv"; - reg = <0x180000 0x10000>; - }; - }; }; };
Gregory CLEMENT
maintainerQuoted 18 lines · Tomasz Maciej Nowak
The manufacturer of this board, ships it with various SPI NOR chips and increments U-Boot bootloader version along the time. There is no way to tell which is placed on the board since no revision bump takes place. This creates two issues.
The first, cosmetic. Since the NOR chip may differ, there's message on boot stating that kernel expected w25q32dw and found different one. To correct this, remove optional device-specific compatible string. Being here lets replace bogus "spi-flash" compatible string with proper one.
The second is linked to partitions layout, it changed after commit:
81e7251252("arm64: mvebu: config: move env to the end of the 4MB boot device") in Marvells downstream U-Boot fork [1], shifting environment location to the end of boot device. Since the new boards will have U-Boot with this change, it'll lead to improper results writing or reading from these partitions. We can't tell if users will update bootloader to recent version provided on manufacturer website, so lets drop partitons layout.
Quoted 3 lines
1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
Signed-off-by Tomasz Maciej Nowak <[email protected]>
Applied on mvebu/dt64
Thanks,
Gregory
Quoted 38 lines
--- .../dts/marvell/armada-3720-espressobin.dts | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +1
-17@@ -95,25 +95,9 @@ flash@0 { reg = <0>; - compatible = "winbond,w25q32dw", "jedec,spi-flash"; + compatible = "jedec,spi-nor"; spi-max-frequency = <104000000>; m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0 0x180000>; - }; - - partition@180000 { - label = "ubootenv"; - reg = <0x180000 0x10000>; - }; - }; }; };Signature · 1 line
2.21.0
Signature · 3 lines
Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com